[OE-core] create_image.wic is missing u-boot SPL file
Oliver Graute
oliver.graute at gmail.com
Wed Feb 10 16:14:58 UTC 2016
Hello list,
I observe a problem with the create_image.wic script after second execution of
bitbake fsl-image
NOTE: recipe fsl-image-1.0-r0: task do_rootfs: Started
2016-02-10T03:21:41.323Z: ERROR: Error: The image creation script '/home/dnt/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/create_image.wic' returned 1:
2016-02-10T03:21:41.323Z: Error: exec_cmd: du -Lbks /home/dnt/build-imx6ulevk/tmp/deploy/images/imx6ulevk/SPL returned '1' instead of 0
2016-02-10T03:21:41.323Z: Checking basic build environment...
2016-02-10T03:21:41.323Z: Done.
2016-02-10T03:21:41.324Z:
2016-02-10T03:21:41.324Z: Creating image(s)...
2016-02-10T03:21:41.324Z:
2016-02-10T03:21:41.324Z: WARNING: exit code 1 from a shell command.
2016-02-10T03:21:41.324Z:
2016-02-10T03:21:41.324Z: ERROR: Function failed: do_rootfs
2016-02-10T03:21:41.371Z: ERROR: Logfile of failure stored in: /home/dnt/build-imx6ulevk/tmp/work/imx6ulevk-poky-linux-gnueabi/fsl-image/1.0-r0/temp/log.do_rootfs.27900
Somewhere the SPL symbolic link and the SPL files itself are deleted from my
deploy image folder during the wic run.
If i execute
bitbake -c cleansstate u-boot fsl-image
bitbake u-boot fsl-image
everything works fine, until I run next time bitbake fsl_image again
(without u-boot before)
Some ideas how to fix this?
Best regards,
Oliver
More information about the Openembedded-core
mailing list