[OE-core] [PATCH 0/3 v2] Upgrade RPM 5 to 5.4.16 (CVS HEAD)

[Mark Hatle]

Status update.

I was able to reproduce the issue and I have added a configure check to see if
the compiler supports the atomic operations or not.  RPM will then configure
itself to use them if available.

I also disabled the blake tests which were causing issues in some parallel builds.

Finally I found an issue where a specific dependency (internal to the package)
was not being properly determined by RPM.  I'm currently investigating this.

--Mark

On 2/27/16 5:26 PM, Mark Hatle wrote:
> On 2/27/16 4:47 PM, Burton, Ross wrote:
>>
>> On 27 February 2016 at 04:26, Mark Hatle <mark.hatle at windriver.com
>> <mailto:mark.hatle at windriver.com>> wrote:
>>
>>     I am not getting this error on qemux86.
>>
>>     My build configuration:
>>
>>     BB_VERSION        = "1.29.0"
>>     BUILD_SYS         = "x86_64-linux"
>>     NATIVELSBSTRING   = "Fedora-23"
>>     TARGET_SYS        = "i586-oe-linux"
>>     MACHINE           = "qemux86"
>>     DISTRO            = "nodistro"
>>     DISTRO_VERSION    = "nodistro.0"
>>     TUNE_FEATURES     = "m32 i586"
>>     TARGET_FPU        = ""
>>     meta              = "mhatle/rpm-5.4.16:004efb3aaa973dba030847c1c8218238f0cc68c5"
>>
>>     The local.conf is the stock one with buildhistory and package_rpm enabled.
>>
>>     Which compiler do you have enabled?  I'm building with the default 5.3.0
>>     compiler.
>>
>>     Since I'm not reproducing the problem, I'd like to know what the difference in
>>     configurations is.
>>
>>
>> This was on the autobuilder and happened twice in rpm-native:
>>
>> http://errors.yoctoproject.org/Errors/Details/38006/ (Debian 8.3)
>> http://errors.yoctoproject.org/Errors/Details/38000/ (Ubuntu 14.04)
>>
>> I guess the -native bit is important there.
> 
> Ok.. so that is different.  It means the host compiler is too old and doesn't
> support atomic transactions.
> 
>> Also, another failure happened more globally:
>>
>> gcc: error: tblake2bp.o: No such file or directory
>>
>> Several times in rpm for target:
>> http://errors.yoctoproject.org/Errors/Details/37991/
>> http://errors.yoctoproject.org/Errors/Details/38001/
>> http://errors.yoctoproject.org/Errors/Details/38007/
>> http://errors.yoctoproject.org/Errors/Details/38004/
> 
> Ok. I'll investigate this one as well.  Likely this is a parallel build issue,
> hopefully I can spot the fault.
> 
> --Mark
> 
>> And once in rpm-native:
>> http://errors.yoctoproject.org/Errors/Details/37995/
>>
>> Ross
>