[OE-core] [PATCH] linux-yocto/4.1: usb backports for Apollo Lake/Broxton

[Richard Purdie]

On Fri, 2016-03-11 at 13:44 -0500, Bruce Ashfield wrote:
> Importing a series of mainline backports to support USB on a couple
> of
> Intel platforms:
> 
>    bbce8fe2cc42 usb: dwc3: pci: add support for Intel Broxton SOC
>    e734e1d9f827 usb: dwc3: pci: Set enblslpm quirk for Synopsys
> platforms
>    1c6bb6694d50 usb: dwc3: Add dis_enblslpm_quirk
>    1c6be99e56b8 usb: dwc3: pci: trivial: Formatting
>    2f2b89764b97 usb: dwc3: pci: passing forward the ACPI companion
>    ea4b3c72d976 usb: dwc3: core: convert to unified device property
> interface
>    dc670b52c69a usb: common: of_usb_get_dr_mode to usb_get_dr_mode
>    586fc5174649 usb: dwc3: st: prepare the driver for generic
> usb_get_dr_mode function
>    0624bd9af7ef usb: common: of_usb_get_maximum_speed to
> usb_get_maximum_speed
>    e65bc5467e07 usb: dwc3: Add frame length adjustment quirk
>    a90954c5d267 usb: musb: dsps: control musb speed based on dts
> setting
>    b48ff160a993 usb: renesas_usbhs: Allow an OTG PHY driver to
> provide VBUS
>    d1c59752195e usb: chipidea: set usb otg capabilities
>    733eada2cdec usb: common: add API to update usb otg capabilities
> by device tree
>    7ab2108dd82b usb: dwc3: core: avoid NULL pointer dereference
>    1aedb48b7dc9 usb: dwc3: add ULPI interface support
>    07e42a29fb7e usb: dwc3: pci: add quirk for Baytrails
>    065917252622 usb: dwc3: add hsphy_interface property
>    b2bb32a363a3 usb: dwc3: setup phys earlier
>    bf6bb0a6ebb5 usb: dwc3: soft reset to it's own function
>    d481da949476 usb: dwc3: cache hwparams earlier
>    9ac66262a201 usb: dwc3: store driver data earlier
>    5f940588938c usb: dwc3: ULPI or UTMI+ select
>    04fdce097f83 usb: dwc3: USB2 PHY register access bits
>    b7209213cc05 usb: add bus type for USB ULPI

I have a suspicion this breaks qemuppc:

https://autobuilder.yoctoproject.org/main/builders/nightly-ppc-lsb/builds/683/steps/BuildImages/logs/stdio

Cheers,

Richard