[OE-core] [wic][PATCH] wic: add beaglebone.wks

[Ed Bartosh]

On Wed, Sep 21, 2016 at 06:34:33PM +0200, Maciej Borzęcki wrote:
> On Wed, Sep 21, 2016 at 5:18 PM, Ed Bartosh <ed.bartosh at linux.intel.com> wrote:
> > Added wks to make an image for Beaglebone board.
> >
> > Signed-off-by: Ed Bartosh <ed.bartosh at linux.intel.com>
> > ---
> >  scripts/lib/wic/canned-wks/beaglebone.wks | 7 +++++++
> >  1 file changed, 7 insertions(+)
> >  create mode 100644 scripts/lib/wic/canned-wks/beaglebone.wks
> >
> > diff --git a/scripts/lib/wic/canned-wks/beaglebone.wks b/scripts/lib/wic/canned-wks/beaglebone.wks
> > new file mode 100644
> > index 0000000..753418e
> > --- /dev/null
> > +++ b/scripts/lib/wic/canned-wks/beaglebone.wks
> > @@ -0,0 +1,7 @@
> > +# short-description: Create Beaglebone disk image
> > +# long-description: Creates a partitioned disk image for Beaglebone board
> > +# which can be directly copied to SD card.
> > +
> > +part /boot --ondisk mmcblk0 --label boot --fstype vfat --source bootimg-partition --align 1024 --active
> > +part /     --ondisk mmcblk0 --label root --fstype ext4 --source rootfs --align 1024
> > +
> 
> Should be basically the same as sdimage-bootpart.wks as I used BBB
> back when I posted it along with some wic fixes. It also used to be
> possible to build a usable RaspberryPI image with the same kickstart
> file, though I have not tried that lately.

Thank you for pointing this out to me. I've just built wic image using
sdimage-bootpart.wks and it worked just fine on my BBB.

I didn't need any fixes though. Have your fixes been merged? Can you
point me out to them?

--
Regards,
Ed