[OE-core] [PATCH 22/44] scripts/rpm2cpio.sh: replace 5.x version with 4.x version

[Mark Hatle]

Just an FYI, I was concerned that $(( ))  (in the new script) was a bash-ism,
but I was able to run the script on an Ubuntu machine using 'dash' as /bin/sh.

--Mark

On 3/10/17 5:24 AM, Alexander Kanavin wrote:
> Signed-off-by: Alexander Kanavin <alexander.kanavin at linux.intel.com>
> ---
>  scripts/rpm2cpio.sh | 108 ++++++++++++++++++++++++++--------------------------
>  1 file changed, 55 insertions(+), 53 deletions(-)
> 
> diff --git a/scripts/rpm2cpio.sh b/scripts/rpm2cpio.sh
> index 5df8c0f7054..cf23472ba95 100755
> --- a/scripts/rpm2cpio.sh
> +++ b/scripts/rpm2cpio.sh
> @@ -1,53 +1,55 @@
> -#!/bin/sh
> -
> -# This comes from the RPM5 5.4.0 distribution.
> -
> -pkg=$1
> -if [ "$pkg" = "" -o ! -e "$pkg" ]; then
> -    echo "no package supplied" 1>&2
> -   exit 1
> -fi
> -
> -leadsize=96
> -o=`expr $leadsize + 8`
> -set `od -j $o -N 8 -t u1 $pkg`
> -il=`expr 256 \* \( 256 \* \( 256 \* $2 + $3 \) + $4 \) + $5`
> -dl=`expr 256 \* \( 256 \* \( 256 \* $6 + $7 \) + $8 \) + $9`
> -# echo "sig il: $il dl: $dl"
> -
> -sigsize=`expr 8 + 16 \* $il + $dl`
> -o=`expr $o + $sigsize + \( 8 - \( $sigsize \% 8 \) \) \% 8 + 8`
> -set `od -j $o -N 8 -t u1 $pkg`
> -il=`expr 256 \* \( 256 \* \( 256 \* $2 + $3 \) + $4 \) + $5`
> -dl=`expr 256 \* \( 256 \* \( 256 \* $6 + $7 \) + $8 \) + $9`
> -# echo "hdr il: $il dl: $dl"
> -
> -hdrsize=`expr 8 + 16 \* $il + $dl`
> -o=`expr $o + $hdrsize`
> -EXTRACTOR="dd if=$pkg ibs=$o skip=1"
> -
> -COMPRESSION=`($EXTRACTOR |file -) 2>/dev/null`
> -if echo $COMPRESSION |grep -iq gzip; then
> -	DECOMPRESSOR=gunzip
> -elif echo $COMPRESSION |grep -iq bzip2; then
> -	DECOMPRESSOR=bunzip2
> -elif echo $COMPRESSION |grep -iq xz; then
> -	DECOMPRESSOR=unxz
> -elif echo $COMPRESSION |grep -iq cpio; then
> -	DECOMPRESSOR=cat
> -else
> -	# Most versions of file don't support LZMA, therefore we assume
> -	# anything not detected is LZMA
> -	DECOMPRESSOR=`which unlzma 2>/dev/null`
> -	case "$DECOMPRESSOR" in
> -	    /* ) ;;
> -	    *  ) DECOMPRESSOR=`which lzmash 2>/dev/null`
> -	         case "$DECOMPRESSOR" in
> -	             /* ) DECOMPRESSOR="lzmash -d -c" ;;
> -	             *  ) DECOMPRESSOR=cat ;;
> -	         esac
> -	         ;;
> -	esac
> -fi
> -
> -$EXTRACTOR 2>/dev/null | $DECOMPRESSOR
> +#!/bin/sh -efu
> +
> +# This file comes from rpm 4.x distribution
> +
> +fatal() {
> +	echo "$*" >&2
> +	exit 1
> +}
> +
> +pkg="$1"
> +[ -n "$pkg" -a -e "$pkg" ] ||
> +	fatal "No package supplied"
> +
> +_dd() {
> +	local o="$1"; shift
> +	dd if="$pkg" skip="$o" iflag=skip_bytes status=none $*
> +}
> +
> +calcsize() {
> +	offset=$(($1 + 8))
> +
> +	local i b b0 b1 b2 b3 b4 b5 b6 b7
> +
> +	i=0
> +	while [ $i -lt 8 ]; do
> +		b="$(_dd $(($offset + $i)) bs=1 count=1)"
> +		[ -z "$b" ] &&
> +			b="0" ||
> +			b="$(exec printf '%u\n' "'$b")"
> +		eval "b$i=\$b"
> +		i=$(($i + 1))
> +	done
> +
> +	rsize=$((8 + ((($b0 << 24) + ($b1 << 16) + ($b2 << 8) + $b3) << 4) + ($b4 << 24) + ($b5 << 16) + ($b6 << 8) + $b7))
> +	offset=$(($offset + $rsize))
> +}
> +
> +case "$(_dd 0 bs=8 count=1)" in
> +	"$(printf '\355\253\356\333')"*) ;; # '\xed\xab\xee\xdb'
> +	*) fatal "File doesn't look like rpm: $pkg" ;;
> +esac
> +
> +calcsize 96
> +sigsize=$rsize
> +
> +calcsize $(($offset + (8 - ($sigsize % 8)) % 8))
> +hdrsize=$rsize
> +
> +case "$(_dd $offset bs=3 count=1)" in
> +	"$(printf '\102\132')"*) _dd $offset | bunzip2 ;; # '\x42\x5a'
> +	"$(printf '\037\213')"*) _dd $offset | gunzip  ;; # '\x1f\x8b'
> +	"$(printf '\375\067')"*) _dd $offset | xzcat   ;; # '\xfd\x37'
> +	"$(printf '\135\000')"*) _dd $offset | unlzma  ;; # '\x5d\x00'
> +	*) fatal "Unrecognized rpm file: $pkg" ;;
> +esac
>