[OE-core] [PATCH v2 2/2] install*.sh: add short sleep after parted commands

[Wold, Saul]

Much better!

Sau!

On Tue, 2017-11-21 at 15:02 -0800, California Sullivan wrote:
> I wasn't able to install to my Optane SSD due to the following error:
> 
> Formatting /dev/nvme0n1p1 to vfat...
> mkfs.fat 4.1 (2017-01-24)
> mkfs.vfat: unable to open /dev/nvme0n1p1: No such file or directory
> Target install-efi failed
> 
> A couple lines later I see:
> 
> [    10.265401]  nvme0n1: p1 p2 p3
> 
> Then looking at the device itself after booting from a USB stick:
> 
> root at intel-corei7-64: ~# ls /dev/nvme0n1*
> /dev/nvme0n1 /dev/nvme0n1p1 /dev/nvme0n1p2 /dev/nvme0n1p3
> 
> So it looks like the parted commands return before the device node is
> actually created.
> 
> Work around this issue by waiting for device nodes for a short
> duration.
> 
> Signed-off-by: California Sullivan <california.l.sullivan at intel.com>
> ---
> v2: sleep conditionally for up to three seconds instead of one second
> unconditionally. This makes it so if the device nodes are available
> immediately, people don't have to wait, but a system has up to three
> seconds to create them before failing. 
> 
>  meta/recipes-core/initrdscripts/files/init-install-efi.sh | 7
> +++++++
>  meta/recipes-core/initrdscripts/files/init-install.sh     | 7
> +++++++
>  2 files changed, 14 insertions(+)
> 
> diff --git a/meta/recipes-core/initrdscripts/files/init-install-
> efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
> index 5ad3a60..706418f 100644
> --- a/meta/recipes-core/initrdscripts/files/init-install-efi.sh
> +++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
> @@ -186,6 +186,13 @@ parted ${device} mkpart swap linux-swap
> $swap_start 100%
>  
>  parted ${device} print
>  
> +echo "Waiting for device nodes..."
> +C=0
> +while [ $C -ne 3 ] && [ ! -e $bootfs  -o ! -e $rootfs -o ! -e $swap
> ]; do
> +    C=$(( C + 1 ))
> +    sleep 1
> +done
> +
>  echo "Formatting $bootfs to vfat..."
>  mkfs.vfat $bootfs
>  
> diff --git a/meta/recipes-core/initrdscripts/files/init-install.sh
> b/meta/recipes-core/initrdscripts/files/init-install.sh
> index 1cac806..dade059 100644
> --- a/meta/recipes-core/initrdscripts/files/init-install.sh
> +++ b/meta/recipes-core/initrdscripts/files/init-install.sh
> @@ -211,6 +211,13 @@ parted ${device} mkpart $pname linux-swap
> $swap_start 100%
>  
>  parted ${device} print
>  
> +echo "Waiting for device nodes..."
> +C=0
> +while [ $C -ne 3 ] && [ ! -e $bootfs  -o ! -e $rootfs -o ! -e $swap
> ]; do
> +    C=$(( C + 1 ))
> +    sleep 1
> +done
> +
>  echo "Formatting $bootfs to ext3..."
>  mkfs.ext3 $bootfs
>