[OE-core] [PATCH v2] kernel-fitimage: Fix no reg property warning
Alex Kiernan
alex.kiernan at gmail.com
Thu Aug 30 08:11:29 UTC 2018
Hi Pierre-Jean
On Thu, Aug 30, 2018 at 7:27 AM TEXIER Pierre-Jean <texier.pj2 at gmail.com> wrote:
>
> Hi Alex,
>
> Le jeu. 30 août 2018 à 07:58, Alex Kiernan <alex.kiernan at gmail.com> a écrit :
>>
>> On Wed, Aug 29, 2018 at 11:59 PM Pierre-Jean Texier
>> <texier.pj2 at gmail.com> wrote:
>> >
>> > The DT specifications demands a unit-address of a node name to match the "reg"
>> > property in that node. Newer dtc versions will throw warnings if this is
>> > not the case.
>> >
>> > Fixes the following warnings:
>> >
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/kernel at 1 has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/kernel at 1/hash at 1 has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek.dtb has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek.dtb/hash at 1 has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek_pda4.dtb has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek_pda4.dtb/hash at 1 has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek_pda7.dtb has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek_pda7.dtb/hash at 1 has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek_pda7b.dtb has a unit name, but no reg property
>> > | <stdout>: Warning (unit_address_vs_reg): Node /images/fdt at at91-sama5d27_som1_ek_pda7b.dtb/hash at 1 has a unit name, but no reg property
>> >
>> > Signed-off-by: Pierre-Jean Texier <texier.pj2 at gmail.com>
>>
>> This strikes me as a bad idea... it breaks existing boot
>> configurations as it changes the name that has to be selected by
>> U-Boot.
>>
>
> Thanks for your comment,
> In fact, this patch is based on https://patchwork.ozlabs.org/patch/844054/
>
That just patches the docs... if no one was using this code, I'd not
be arguing about it. But with this change I can't upgrade my kernel
without also updating my bootloader, and if I update my bootloader I
can't then rollback (or in reality I'd have to accommodate both
formats).
If there was say UBOOT_FIT_IMAGE_SEPARATOR which was set so that you
can pick your separator, that'd work for me. I guess the only question
is what you default to - I'd argue it's a breaking change so should
stay as '@'.
> /Pierre-Jean
>
>>
>> > ---
>> > Changes in V2:
>> > - rebase on master
>> >
>> > meta/classes/kernel-fitimage.bbclass | 32 ++++++++++++++++----------------
>> > 1 file changed, 16 insertions(+), 16 deletions(-)
>> >
>> > diff --git a/meta/classes/kernel-fitimage.bbclass b/meta/classes/kernel-fitimage.bbclass
>> > index a4d7aca..3d7800a 100644
>> > --- a/meta/classes/kernel-fitimage.bbclass
>> > +++ b/meta/classes/kernel-fitimage.bbclass
>> > @@ -109,7 +109,7 @@ fitimage_emit_section_kernel() {
>> > fi
>> >
>> > cat << EOF >> ${1}
>> > - kernel@${2} {
>> > + kernel-${2} {
>> > description = "Linux kernel";
>> > data = /incbin/("${3}");
>> > type = "kernel";
>> > @@ -118,7 +118,7 @@ fitimage_emit_section_kernel() {
>> > compression = "${4}";
>> > load = <${UBOOT_LOADADDRESS}>;
>> > entry = <${ENTRYPOINT}>;
>> > - hash at 1 {
>> > + hash-1 {
>> > algo = "${kernel_csum}";
>> > };
>> > };
>> > @@ -145,14 +145,14 @@ fitimage_emit_section_dtb() {
>> > dtb_loadline="load = <${UBOOT_DTB_LOADADDRESS}>;"
>> > fi
>> > cat << EOF >> ${1}
>> > - fdt@${2} {
>> > + fdt-${2} {
>> > description = "Flattened Device Tree blob";
>> > data = /incbin/("${3}");
>> > type = "flat_dt";
>> > arch = "${UBOOT_ARCH}";
>> > compression = "none";
>> > ${dtb_loadline}
>> > - hash at 1 {
>> > + hash-1 {
>> > algo = "${dtb_csum}";
>> > };
>> > };
>> > @@ -170,7 +170,7 @@ fitimage_emit_section_setup() {
>> > setup_csum="sha1"
>> >
>> > cat << EOF >> ${1}
>> > - setup@${2} {
>> > + setup-${2} {
>> > description = "Linux setup.bin";
>> > data = /incbin/("${3}");
>> > type = "x86_setup";
>> > @@ -179,7 +179,7 @@ fitimage_emit_section_setup() {
>> > compression = "none";
>> > load = <0x00090000>;
>> > entry = <0x00090000>;
>> > - hash at 1 {
>> > + hash-1 {
>> > algo = "${setup_csum}";
>> > };
>> > };
>> > @@ -225,7 +225,7 @@ fitimage_emit_section_ramdisk() {
>> > esac
>> >
>> > cat << EOF >> ${1}
>> > - ramdisk@${2} {
>> > + ramdisk-${2} {
>> > description = "${INITRAMFS_IMAGE}";
>> > data = /incbin/("${3}");
>> > type = "ramdisk";
>> > @@ -234,7 +234,7 @@ fitimage_emit_section_ramdisk() {
>> > compression = "${ramdisk_ctype}";
>> > ${ramdisk_loadline}
>> > ${ramdisk_entryline}
>> > - hash at 1 {
>> > + hash-1 {
>> > algo = "${ramdisk_csum}";
>> > };
>> > };
>> > @@ -269,39 +269,39 @@ fitimage_emit_section_config() {
>> > if [ -n "${2}" ]; then
>> > conf_desc="Linux kernel"
>> > sep=", "
>> > - kernel_line="kernel = \"kernel@${2}\";"
>> > + kernel_line="kernel = \"kernel-${2}\";"
>> > fi
>> >
>> > if [ -n "${3}" ]; then
>> > conf_desc="${conf_desc}${sep}FDT blob"
>> > sep=", "
>> > - fdt_line="fdt = \"fdt@${3}\";"
>> > + fdt_line="fdt = \"fdt-${3}\";"
>> > fi
>> >
>> > if [ -n "${4}" ]; then
>> > conf_desc="${conf_desc}${sep}ramdisk"
>> > sep=", "
>> > - ramdisk_line="ramdisk = \"ramdisk@${4}\";"
>> > + ramdisk_line="ramdisk = \"ramdisk-${4}\";"
>> > fi
>> >
>> > if [ -n "${5}" ]; then
>> > conf_desc="${conf_desc}${sep}setup"
>> > - setup_line="setup = \"setup@${5}\";"
>> > + setup_line="setup = \"setup-${5}\";"
>> > fi
>> >
>> > if [ "${6}" = "1" ]; then
>> > - default_line="default = \"conf@${3}\";"
>> > + default_line="default = \"conf-${3}\";"
>> > fi
>> >
>> > cat << EOF >> ${1}
>> > ${default_line}
>> > - conf@${3} {
>> > + conf-${3} {
>> > description = "${6} ${conf_desc}";
>> > ${kernel_line}
>> > ${fdt_line}
>> > ${ramdisk_line}
>> > ${setup_line}
>> > - hash at 1 {
>> > + hash-1 {
>> > algo = "${conf_csum}";
>> > };
>> > EOF
>> > @@ -333,7 +333,7 @@ EOF
>> > sign_line="${sign_line};"
>> >
>> > cat << EOF >> ${1}
>> > - signature at 1 {
>> > + signature-1 {
>> > algo = "${conf_csum},rsa2048";
>> > key-name-hint = "${conf_sign_keyname}";
>> > ${sign_line}
>> > --
>> > 2.7.4
>> >
>> > --
>> > _______________________________________________
>> > Openembedded-core mailing list
>> > Openembedded-core at lists.openembedded.org
>> > http://lists.openembedded.org/mailman/listinfo/openembedded-core
>>
>>
>>
>> --
>> Alex Kiernan
--
Alex Kiernan
More information about the Openembedded-core
mailing list