[OE-core] [PATCH v2] busybox: update to 1.29.2

Randy MacLeod randy.macleod at windriver.com
Thu Aug 30 18:27:49 UTC 2018


On 08/30/2018 04:25 AM, Andrej Valek wrote:
>    - refresh busybox-udhcpc-no_deconfig.patch
>    - remove obsolete patches which are included in this update
>    - update defconfig

It seems that you just adapted to upstream changes so just say so
in the long log.

I looked at the defconfig changes and I have some minor comments
on that below. I think we should merge the defconfig as is with
a long log comment.

It might be nice to add the setfattr applet but that can be done
later or even in the next release if someone comes up with a real
need rather than thinking that it's  "nice to have".


Also, your patch email was in the wrong format and
even if I work around that, it didn't apply to master.

You email encoding is:

Openpgp: preference=signencrypt
Autocrypt: addr=andrej.valek at siemens.com; prefer-encrypt=mutual; keydata=
         xsBNBFkSzTcBCADSJTRk7Y...bIFUmc7ck3KeuUGKy
         ifrpWD6/7YPXbixv4sAlFl...zmMdr0BPLMsL96nBO
...
    Content-Type: text/plain; charset="utf-8"
    Content-Transfer-Encoding: base64

so while I can read it in an email client such as Thunderbird,
if I save it and try to git am it, that doesn't work since
it's encoded.

Can you resend using:
    Content-Type: text/plain; charset="us-ascii"
    Content-Transfer-Encoding: 7bit
or maybe someone will explain how to deal with this encoding.

Even saving the text doesn't result in a good patch
due to line wrapping (which I tried to fix manually)
and then another error:
   $ git am /tmp/bb-txt/busybox-update-fix.txt
   Applying: busybox: update to 1.29.2
   error: patch failed: \
     meta/recipes-core/busybox/busybox/CVE-2011-5325.patch:1
   error: meta/recipes-core/busybox/busybox/CVE-2011-5325.patch: \
     patch does not apply
   error: patch failed: \
     meta/recipes-core/busybox/busybox/CVE-2017-15873.patch:1
   error: meta/recipes-core/busybox/busybox/CVE-2017-15873.patch: \
     patch does not apply
   ...

I use 'git send-email' and usually remember to us:
    --smtp-server=smtp.example.com
to avoid Outlook being a problem. I expect that some of
your co-workers have dealt with the problem already.

Or maybe just send punch cards! ;-)


Thanks Andrej!

../Randy
> 
> Signed-off-by: Andrej Valek <andrej.valek at siemens.com>
> ---
>   ...inittab_1.27.2.bb => busybox-inittab_1.29.2.bb} |   0
>   .../busybox/busybox/CVE-2011-5325.patch            | 481
> ---------------------
>   .../busybox/busybox/CVE-2017-15873.patch           |  95 ----
>   .../busybox/busybox/busybox-CVE-2017-16544.patch   |  43 --
>   .../busybox/busybox-fix-lzma-segfaults.patch       | 106 -----
>   .../busybox/busybox-udhcpc-no_deconfig.patch       |  48 +-
>   meta/recipes-core/busybox/busybox/defconfig        |  46 +-
>   .../busybox/busybox/umount-ignore-c.patch          |  40 --
>   .../{busybox_1.27.2.bb => busybox_1.29.2.bb}       |   9 +-
>   9 files changed, 66 insertions(+), 802 deletions(-)
>   rename meta/recipes-core/busybox/{busybox-inittab_1.27.2.bb =>
> busybox-inittab_1.29.2.bb} (100%)
>   delete mode 100755 meta/recipes-core/busybox/busybox/CVE-2011-5325.patch
>   delete mode 100644 meta/recipes-core/busybox/busybox/CVE-2017-15873.patch
>   delete mode 100644
> meta/recipes-core/busybox/busybox/busybox-CVE-2017-16544.patch
>   delete mode 100644
> meta/recipes-core/busybox/busybox/busybox-fix-lzma-segfaults.patch
>   delete mode 100644 meta/recipes-core/busybox/busybox/umount-ignore-c.patch
>   rename meta/recipes-core/busybox/{busybox_1.27.2.bb =>
> busybox_1.29.2.bb} (82%)
> 

...

> diff --git a/meta/recipes-core/busybox/busybox/defconfig
> b/meta/recipes-core/busybox/busybox/defconfig
> index 59d93c7079..f081f281cc 100644
> --- a/meta/recipes-core/busybox/busybox/defconfig
> +++ b/meta/recipes-core/busybox/busybox/defconfig
> @@ -1,12 +1,12 @@
>   #
>   # Automatically generated make config: don't edit
> -# Busybox version: 1.27.2
> -# Wed Sep 27 08:56:13 2017
> +# Busybox version: 1.29.1

s/1.29.1/1.29.2/

> +# Thu Jul 19 11:09:46 2018
>   #
>   CONFIG_HAVE_DOT_CONFIG=y
> 
>   #
> -# Busybox Settings
> +# Settings
>   #
>   # CONFIG_DESKTOP is not set
>   # CONFIG_EXTRA_COMPAT is not set
> @@ -78,7 +78,7 @@ CONFIG_NO_DEBUG_LIB=y
>   # CONFIG_EFENCE is not set
> 
>   #
> -# Busybox Library Tuning
> +# Library Tuning
>   #
>   # CONFIG_FEATURE_USE_BSS_TAIL is not set
>   CONFIG_FEATURE_RTMINMAX=y
> @@ -90,6 +90,7 @@ CONFIG_MD5_SMALL=1
>   CONFIG_SHA3_SMALL=1
>   CONFIG_FEATURE_FAST_TOP=y
>   # CONFIG_FEATURE_ETC_NETWORKS is not set
> +# CONFIG_FEATURE_ETC_SERVICES is not set
>   CONFIG_FEATURE_EDITING=y
>   CONFIG_FEATURE_EDITING_MAX_LEN=1024
>   # CONFIG_FEATURE_EDITING_VI is not set
> @@ -321,6 +322,7 @@ CONFIG_TRUE=y
>   CONFIG_TTY=y
>   CONFIG_UNAME=y
>   CONFIG_UNAME_OSNAME="GNU/Linux"
> +# CONFIG_BB_ARCH is not set
>   CONFIG_UNIQ=y
>   CONFIG_UNLINK=y
>   CONFIG_USLEEP=y
> @@ -393,6 +395,14 @@ CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
>   CONFIG_WHICH=y
> 
>   #
> +# klibc-utils
> +#
> +# CONFIG_MINIPS is not set
> +# CONFIG_NUKE is not set
> +# CONFIG_RESUME is not set
> +# CONFIG_RUN_INIT is not set
> +
> +#
>   # Editors
>   #
>   CONFIG_AWK=y
> @@ -678,6 +688,10 @@ CONFIG_FEATURE_MOUNT_LOOP=y
>   CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
>   # CONFIG_FEATURE_MTAB_SUPPORT is not set
>   # CONFIG_VOLUMEID is not set
> +
> +#
> +# Filesystem/Volume identification
> +#
>   # CONFIG_FEATURE_VOLUMEID_BCACHE is not set
>   # CONFIG_FEATURE_VOLUMEID_BTRFS is not set
>   # CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
> @@ -725,6 +739,7 @@ CONFIG_FEATURE_CROND_DIR=""
>   # CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
>   # CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
>   # CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
> +# CONFIG_HEXEDIT is not set
>   # CONFIG_I2CGET is not set
>   # CONFIG_I2CSET is not set
>   # CONFIG_I2CDUMP is not set
> @@ -807,6 +822,7 @@ CONFIG_MICROCOM=y
>   # CONFIG_RUNLEVEL is not set
>   # CONFIG_RX is not set
>   # CONFIG_SETSID is not set
> +# CONFIG_SETFATTR is not set

Seems like that might be useful and should be enabled by default
but I don't need it for 2.6

It's not a huge delta:
b278ac0e6 setfattr: new applet
...
    (add/remove: 7/0 grow/shrink: 4/0 up/down: 458/0)
              Total: 458 bytes


>   CONFIG_STRINGS=y
>   CONFIG_TIME=y
>   # CONFIG_TIMEOUT is not set
> @@ -912,6 +928,8 @@ CONFIG_FEATURE_FANCY_PING=y
>   CONFIG_ROUTE=y
>   # CONFIG_SLATTACH is not set
>   # CONFIG_SSL_CLIENT is not set
> +# CONFIG_TC is not set
> +# CONFIG_FEATURE_TC_INGRESS is not set
>   # CONFIG_TCPSVD is not set
>   # CONFIG_UDPSVD is not set
>   CONFIG_TELNET=y
> @@ -949,13 +967,9 @@ CONFIG_FEATURE_WGET_HTTPS=y
>   # CONFIG_FEATURE_WGET_OPENSSL is not set
>   # CONFIG_WHOIS is not set
>   # CONFIG_ZCIP is not set
> -# CONFIG_UDHCPC6 is not set
> -# CONFIG_FEATURE_UDHCPC6_RFC3646 is not set
> -# CONFIG_FEATURE_UDHCPC6_RFC4704 is not set
> -# CONFIG_FEATURE_UDHCPC6_RFC4833 is not set

Ah, these are just moved down a few lines.

>   CONFIG_UDHCPD=y
> -# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
>   # CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set
> +# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
>   CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases"
>   CONFIG_DUMPLEASES=y
>   # CONFIG_DHCPRELAY is not set
> @@ -963,6 +977,15 @@ CONFIG_UDHCPC=y
>   CONFIG_FEATURE_UDHCPC_ARPING=y
>   CONFIG_FEATURE_UDHCPC_SANITIZEOPT=y
>   CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
> +# CONFIG_UDHCPC6 is not set
> +# CONFIG_FEATURE_UDHCPC6_RFC3646 is not set
> +# CONFIG_FEATURE_UDHCPC6_RFC4704 is not set
> +# CONFIG_FEATURE_UDHCPC6_RFC4833 is not set
> +# CONFIG_FEATURE_UDHCPC6_RFC5970 is not set
> +
> +#
> +# Common options for DHCP applets
> +#
>   # CONFIG_FEATURE_UDHCP_PORT is not set
>   CONFIG_UDHCP_DEBUG=0
>   # CONFIG_FEATURE_UDHCP_RFC3397 is not set
> @@ -1045,6 +1068,7 @@ CONFIG_WATCH=y
>   # CONFIG_SV is not set
>   CONFIG_SV_DEFAULT_SERVICE_DIR=""
>   # CONFIG_SVC is not set
> +# CONFIG_SVOK is not set
>   # CONFIG_SVLOGD is not set
>   # CONFIG_CHCON is not set
>   # CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
> @@ -1134,6 +1158,10 @@ CONFIG_FEATURE_SH_HISTFILESIZE=y
>   # System Logging Utilities
>   #
>   CONFIG_KLOGD=y
> +
> +#
> +# klogd should not be used together with syslog to kernel printk buffer
> +#
>   CONFIG_FEATURE_KLOGD_KLOGCTL=y
>   CONFIG_LOGGER=y
>   # CONFIG_LOGREAD is not set
> diff --git a/meta/recipes-core/busybox/busybox/umount-ignore-c.patch
> b/meta/recipes-core/busybox/busybox/umount-ignore-c.patch
> deleted file mode 100644
> index 9fe7998df3..0000000000
> --- a/meta/recipes-core/busybox/busybox/umount-ignore-c.patch
> +++ /dev/null
...
> diff --git a/meta/recipes-core/busybox/busybox_1.27.2.bb
> b/meta/recipes-core/busybox/busybox_1.29.2.bb
> similarity index 82%
> rename from meta/recipes-core/busybox/busybox_1.27.2.bb
> rename to meta/recipes-core/busybox/busybox_1.29.2.bb
> index 1ce4823d47..c86b4f57b3 100644
> --- a/meta/recipes-core/busybox/busybox_1.27.2.bb
> +++ b/meta/recipes-core/busybox/busybox_1.29.2.bb
> @@ -42,13 +42,8 @@ SRC_URI =
> "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
>              file://rcK \
>              file://runlevel \
>              file://makefile-libbb-race.patch \
> -           file://CVE-2011-5325.patch \
> -           file://CVE-2017-15873.patch \
> -           file://busybox-CVE-2017-16544.patch \
> -           file://busybox-fix-lzma-segfaults.patch \
> -           file://umount-ignore-c.patch \
>   "
>   SRC_URI_append_libc-musl = " file://musl.cfg "
> 
> -SRC_URI[tarball.md5sum] = "476186f4bab81781dab2369bfd42734e"
> -SRC_URI[tarball.sha256sum] =
> "9d4be516b61e6480f156b11eb42577a13529f75d3383850bb75c50c285de63df"
> +SRC_URI[tarball.md5sum] = "9cffb6c0e4df06914205f38ac8b40d80"
> +SRC_URI[tarball.sha256sum] =
> "fc250730ea16d28839bfecda3c431683fa6bd4273ffca6b632cbeb3556c914c3"
> 


-- 
# Randy MacLeod
# Wind River Linux



More information about the Openembedded-core mailing list