[OE-core] devtool deploy-target fails with "no files to deploy"

[Håkan Eriksson]

Hi!


This is my first post to this mailing list, so I want to start by apologizing if I go about it in the wrong way, but the impression I got on http://lists.openembedded.org/mailman/listinfo/openembedded-core was that it's OK to simply email the list. I have searched for answers first, both in the list archives and the internet in general, but no luck. This makes me believe that it probably is something wrong in our configuration/implementation, but I have no clue of what.


We are using Yocto to build Linux for an NXP imx7 device. Everything works OK, so the setup we have (which I believe is based on the imx7dsabresd machine) at least does that right.


At the moment I am trying to evaluate eSDK, so I have built it, installed it, and used it a little bit, but when I tried to deploy to target, devtool failed to find any files to deploy. The files are there, though, but not in the place where devtool is searching; the built binaries all are under tmp/work/armv7at2hf-neon-fslc-linux-gnueabi, and devtool tries to find them under tmp/work/armv7ahf-neon-fslc-linux-gnueabi.


So, something seems to be wrong in the setup of hardware target (armv7at2hf vs. armv7ahf)? I cannot figure out what, though, since bitbake uses the same config files to build our image as well as the eSDK.


By the way, using devtool the same way (deploy-target) on a recipe in our normal bitbake environment produces the same kind of error. So, come to think of it, it's probably not a problem with eSDK as such.


Best regards,

Håkan Eriksson



Openembedded-core Info Page<http://lists.openembedded.org/mailman/listinfo/openembedded-core>
lists.openembedded.org
To see the collection of prior postings to the list, visit the Openembedded-core Archives. Using Openembedded-core: To post a message to all the list ...


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20180118/1e8a7a34/attachment-0002.html>