[OE-core] [PATCH] Revert "kernel-devicetree: Corrected normalize_dtb"

[Martin Jansa]

I am out til Sunday, so please someone else please resend just the revert.
Next week I will check the ppc issue and resend the rest (v2 is the same as
v3 except the rebase after this change, so after revert the v2 will apply
cleanly again)

On Thu, Jul 5, 2018, 10:23 Richard Purdie <
richard.purdie at linuxfoundation.org> wrote:

> On Thu, 2018-07-05 at 09:15 +0200, Nicolas Dechesne wrote:
> > On Wed, Jul 4, 2018 at 10:07 PM Martin Jansa <martin.jansa at gmail.com>
> > wrote:
> > >
> > > This reverts commit 2e7f3b2b9318d1e5395ad58131eafb873f614326.
> > >
> > > It was breaking quite common use case that the dtb files are in
> > > some subdirectory and then kernel build fails to build them.
> > >
> > > As reported by khem:
> > > http://lists.openembedded.org/pipermail/openembedded-core/2018-July
> > > /152578.html
> > > me:
> > > http://lists.openembedded.org/pipermail/openembedded-core/2018-July
> > > /152579.html
> > > on raspberrypi3 build:
> > >
> > > make[3]: *** No rule to make target
> > > 'arch/arm/boot/dts/dwc2.dtbo'.  Stop.
> > > arch/arm/Makefile:345: recipe for target 'dwc2.dtbo' failed
> > > make[2]: *** [dwc2.dtbo] Error 2
> > > Makefile:146: recipe for target 'sub-make' failed
> > >
> > > and trevor on the IRC:
> > > 20:35:49 < tlwoerner> the recent
> > > 2e7f3b2b9318d1e5395ad58131eafb873f614326 commit in oe-core seems to
> > > cause dragonboard-410c's kernel to fail to build
> > > 20:36:26 < tlwoerner> for the dragonboard-410c, KERNEL_DEVICETREE
> > > is set to "qcom/apq8016-sbc.dtb" but the build failure is:
> > > 20:36:37 < tlwoerner> *** No rule to make target
> > > 'arch/arm64/boot/dts/dts/qcom/apq8016-sbc.dtb'.  Stop.
> > > 20:36:44 < tlwoerner> i.e. the "qcom/" is getting removed
> > > 20:37:08 < tlwoerner> oops!!
> > > 20:37:33 < tlwoerner> wrong copy&paste, the actual error is:
> > > 20:37:36 < tlwoerner> *** No rule to make target
> > > 'arch/arm64/boot/dts/apq8016-sbc.dtb'.  Stop.
> > > 20:37:53 < tlwoerner> i.e., the "qcom/" is being stripped out
> >
> > > Signed-off-by: Martin Jansa <Martin.Jansa at gmail.com>
> >
> > Thanks! As reported by Trevor, it's needed for meta-qcom..
> >
> > Reviewed-by: Nicolas Dechesne <nicolas.dechesne at linaro.org>
>
> Just to note that I'm happy to take this but its based on top of
> Martin's other patches and those look like they'll need a respin so
> this will either have to wait or get rebased...
>
> Cheers,
>
> Richard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20180705/fd75ec63/attachment-0002.html>