[OE-core] [PATCH] u-boot: Add {gen|deploy}_default_envs tasks to generate environment images

[Stefano Babic]

On 27/04/2018 17:07, Marek Vasut wrote:
> On 04/27/2018 04:51 PM, Lukasz Majewski wrote:
>> This commit provides the ability to generate u-boot environment(s) as
>> images, which afterwards can be used to produce image (with wic) for
>> flashing (eMMC or SPI-NOR).
>>
>> This change removes the need to run "env default" during production phase,
>> as proper environment (including redundant one) is already stored on
>> persistent memory (the CRC is also correct).
>>
>> Signed-off-by: Lukasz Majewski <lukma at denx.de>
> 
> If your default env is correct, why do you need this ? I can see some
> use with non-default env, but then that can be wrapped into a separate
> recipe.
> 

A use case is when the environment must be changed from user space.
fw_setenv will report the CRC error and it needs the default environment
to add changes. The default environment is linked together to fw_setenv,
but this prohibites to use fw_setenv for multiple boards and must be
explicitely built for that machine and with the same sources as u-boot
(at least, they must share the same CONFIG_EXTRA_ENV). If the default
environment is extracted, we could have a general (distro ?) fw_setenv.

>> ---
>> This patch depends on "u-boot: Upgrade to 2018.03 release"
>> https://patchwork.openembedded.org/patch/149998/
>> ---
>>  meta/recipes-bsp/u-boot/u-boot.inc | 35 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 35 insertions(+)
>>
>> diff --git a/meta/recipes-bsp/u-boot/u-boot.inc b/meta/recipes-bsp/u-boot/u-boot.inc
>> index c2bcf99840..2796e503cf 100644
>> --- a/meta/recipes-bsp/u-boot/u-boot.inc
>> +++ b/meta/recipes-bsp/u-boot/u-boot.inc
>> @@ -305,3 +305,38 @@ do_deploy () {
>>  }
>>  
>>  addtask deploy before do_build after do_compile
>> +
>> +# Create new rules to extract default envs
>> +UBOOT_ENVS_DEFAULT ?= "uboot-envs-default"
>> +DEFAULT_ENVS ?= "u-boot-env-default.txt"
>> +DEFAULT_ENVS_SIZE ?= "65536"
>> +
>> +# Generate default environment
>> +do_gen_default_envs[doc] = "Generate image with default U-Boot environment(s)"
>> +do_gen_default_envs () {
>> +	${B}/source/scripts/get_default_envs.sh ${B} > ${B}/${DEFAULT_ENVS}
>> +
>> +	# Generate env image
>> +	${B}/tools/mkenvimage -s ${DEFAULT_ENVS_SIZE} -o ${B}/${UBOOT_ENVS_DEFAULT} ${B}/${DEFAULT_ENVS}
> 
> Does this actually work during cross build , when mkenvimage
> architecture is different than host architecture ?
> 
>> +	# Generate redundant env image
>> +	${B}/tools/mkenvimage -r -s ${DEFAULT_ENVS_SIZE} -o ${B}/${UBOOT_ENVS_DEFAULT}_r ${B}/${DEFAULT_ENVS}
> 
> Is redundant env always needed on all systems ?
> 
>> +	rm ${B}/${DEFAULT_ENVS}
>> +}
>> +
>> +addtask gen_default_envs before do_deploy_default_envs after do_compile
>> +
>> +# Deploy default environment
>> +do_deploy_default_envs[doc] = "Copy images with default U-Boot environment to deployment directory"
>> +do_deploy_default_envs () {
>> +	install -d ${DEPLOYDIR}
>> +
>> +	install ${B}/${UBOOT_ENVS_DEFAULT} ${DEPLOYDIR}/${UBOOT_ENVS_DEFAULT}
>> +	install ${B}/${UBOOT_ENVS_DEFAULT}_r ${DEPLOYDIR}/${UBOOT_ENVS_DEFAULT}_r
> 
> Does this work with multiple machines or will it overwrite the deployed
> image ?
> 
> 
>> +	rm ${B}/${UBOOT_ENVS_DEFAULT}
>> +	rm ${B}/${UBOOT_ENVS_DEFAULT}_r
>> +}
>> +
>> +addtask deploy_default_envs before do_deploy after do_gen_default_envs
>>
> 
> 

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================