[OE-core] [bitbake-devel] QA Error for DB
Chad Gibeaut
chadg at videx.com
Tue Apr 23 16:35:13 UTC 2019
Resending this now that i am on the correct mailing list.
Thank you for pointing this to the right location,
If i read your suggestion correctly, it was to replace
FILES_${PN}-cxx = "${libdir}/*cxx*so"
with
FILES_${PN}-dev += "${libdir}/*cxx*so"
which I did and it did not change the error.
Thanks,Chad
Thanks,
Chad
From: Robert Yang <liezhi.yang at windriver.com>
To: Chad Gibeaut <chadg at videx.com>, oe-core <openembedded-core at lists.openembedded.org>
Sent: 4/23/2019 12:51 AM
Subject: Re: [bitbake-devel] QA Error for DB
Hi Chad,
This emails should go into oe-core mailing list (Please see the To list).
And I think that something is wrong with:
> # The executables go in a separate package - typically there
> # is no need to install these unless doing real database
> # management on the system.
> inherit lib_package
>
> PACKAGES =+ "${PN}-cxx"
> FILES_${PN}-cxx = "${libdir}/*cxx*so"
Only -dev/-dbg/nativesdk- packages can contain .so (endswith .so) file,
so you can try:
FILES_${PN}-dev += "${libdir}/*cxx*so"
This is just a rough suggestion, I didn't try it, you need test it
carefully before really use it.
>
>
> # The dev package has the .so link (as in db3) and the .a's -
> # it is therefore incompatible (cannot be installed at the
> # same time) as the db3 package
> # sort out the .so since they do version prior to the .so
> SOLIBS = "-6*.so"
> FILES_SOLIBSDEV = "${libdir}/libdb.so ${libdir}/libdb_cxx.so"
// Robert
On 4/20/19 1:43 AM, Chad Gibeaut wrote:
> I am building images(yocto,bitbake,busybox) for two differnt karo SOM's. Both of
> the configuration files are the same (including my own software)
>
> One build fails during the QA portion of the build process on the recipe for the
> Berkeley DB from Oracle. I am not even sure what is requiring this, but
> something does.
>
> |ERROR: db-6.0.30-r0 do_package_qa: QA Issue: non -dev/-dbg/nativesdk- package
> contains symlink .so: db path
> 'work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db/usr/lib/libdb-6.so'
> [dev-so] ERROR: db-6.0.30-r0 do_package_qa: QA run found fatal errors. Please
> consider fixing them. ERROR: db-6.0.30-r0 do_package_qa: Function failed:
> do_package_qa ERROR: Logfile of failure stored in:
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/temp/log.do_package_qa.1270
> ERROR: Task 2138
> (/home/test/karo/fsl-community-bsp_5011/sources/poky/meta/recipes-support/db/db_6.0.30.bb,
> do_package_qa) failed with exit code '1' |
>
> In the folder the error mentions is the .so file along with a link back to that
> same so file minus the minor version.
>
> |-rwxr-xr-x 2 test test 1.1M Apr 9 12:23 libdb-6.0.so lrwxrwxrwx 1 test test 12
> Apr 9 12:24 libdb-6.so -> libdb-6.0.so |
>
> This linked file is being created during the build at some point (removing the
> linked file or even the whole build directory and rerunning results in the same
> issue)
>
> I think I could probably find a way to disable the QA check, but thats not ideal
> since something requires this and I dont like having to disable checks for
> production code.
>
> The Error log file mentioned in the error is here:
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------------ERROR
> Log-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> |DEBUG: Executing python function sstate_task_prefunc DEBUG: Python function
> sstate_task_prefunc finished DEBUG: Executing python function do_package_qa
> NOTE: DO PACKAGE QA DEBUG: Executing python function read_subpackage_metadata
> DEBUG: Python function read_subpackage_metadata finished NOTE: Package db
> skipping QA tests: ['dev-soalready-stripped'] NOTE: Checking Package: db NOTE:
> arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db/usr/lib/libdb-6.0.so
> ERROR: QA Issue: non -dev/-dbg/nativesdk- package contains symlink .so: db path
> 'work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db/usr/lib/libdb-6.so'
> [dev-so] NOTE: Checking Package: db-bin NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_stat
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_deadlock
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_replicate
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_log_verify
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_verify
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_upgrade
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_printlog
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_archive
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_hotbackup
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_dump
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_load
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_checkpoint
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_recover
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-bin/usr/bin/db_tuner
> NOTE: Checking Package: db-staticdev NOTE: Checking Package: db-dev NOTE:
> Package db-cxx skipping QA tests: ['dev-so'] NOTE: Checking Package: db-cxx
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-cxx/usr/lib/libdb_cxx-6.0.so
> NOTE: Checking Package: db-doc NOTE: Checking Package: db-dbg NOTE:
> arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_stat
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_deadlock
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_replicate
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_log_verify
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_verify
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_upgrade
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_printlog
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_archive
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_hotbackup
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_dump
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_load
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_checkpoint
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_recover
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/bin/.debug/db_tuner
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/lib/.debug/libdb_cxx-6.0.so
> NOTE: arm-poky-linux-gnueabi-objdump -p
> /home/test/karo/fsl-community-bsp_5011/build/tmp/work/cortexa7hf-neon-poky-linux-gnueabi/db/6.0.30-r0/packages-split/db-dbg/usr/lib/.debug/libdb-6.0.so
> NOTE: Checking Package: db-locale ERROR: QA run found fatal errors. Please
> consider fixing them. DEBUG: Python function do_package_qa finished ERROR:
> Function failed: do_package_qa |
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------------ERROR
> Log-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> And the busy box recipe is below(from the repo somewhere). There is some mention
> in there about dev so files, but Im not sure if that might be the issue or even
> what changes might need to be made then.
>
>
>
>
> -----------------------------------------------------------------------------------------------------------------------------------------------------------BB
> File-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> |
>
>
>
> # Version 6 of the Berkeley DB from Oracle (formerly Sleepycat) # # At present
> this package only installs the DB code # itself (shared libraries, .a in the dev
> package), # documentation and headers. # # The headers have the same names as
> those as v3 # of the DB, only one version can be used *for dev* # at once - DB3
> and DB6 can both be installed on the # same system at the same time if really
> necessary. SECTION = "libs" SUMMARY = "Berkeley Database v6" HOMEPAGE =
> "http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html"
> LICENSE = "AGPL-3.0" VIRTUAL_NAME ?= "virtual/db" RCONFLICTS_${PN} = "db3" #
> Note, when upgraded to 6.1.x, a patch in RPM will need to be removed to activate
> db 6.1 support. SRC_URI =
> "http://download.oracle.com/berkeley-db/db-${PV}.tar.gz" SRC_URI +=
> "file://arm-thumb-mutex_db5.patch;patchdir=.. \ file://fix-parallel-build.patch
> \ file://Makefile-let-libso_target-depend-on-bt_rec.patch \
> file://Makefile-let-libdb-6.0.la-depend-os_map.l.patch;patchdir=.. \ "
> SRC_URI[md5sum] = "ad28eb86ad3203b5422844db179c585b" SRC_URI[sha256sum] =
> "608e4b1cf390e9bf54c0ef00c5bd9ca76d36e2261b9f4d33d54516f3f6a20fd2" # Exclude NC
> versions which lack AES encryption UPSTREAM_CHECK_REGEX =
> "db-(?P<pver>\d+\.\d+(\.\d+)?).tar" UPSTREAM_CHECK_URI =
> "http://www.oracle.com/technetwork/products/berkeleydb/downloads/index-082944.html"
> LIC_FILES_CHKSUM = "file://../LICENSE;md5=1ec8b0b17cc31513fe35ab10716f8490"
> inherit autotools # Put virtual/db in any appropriate provider of a # relational
> database, use it as a dependency in # place of a specific db and use: # #
> PREFERRED_PROVIDER_virtual/db # # to select the correct db in the build (distro)
> .conf PROVIDES += "${VIRTUAL_NAME}" # bitbake isn't quite clever enough to deal
> with sleepycat, # the distribution sits in the expected directory, but all # the
> builds must occur from a sub-directory. The following # persuades bitbake to go
> to the right place S = "${WORKDIR}/db-${PV}/dist" B =
> "${WORKDIR}/db-${PV}/build_unix" SPDX_S = "${WORKDIR}/db-${PV}" # The
> executables go in a separate package - typically there # is no need to install
> these unless doing real database # management on the system. inherit lib_package
> PACKAGES =+ "${PN}-cxx" FILES_${PN}-cxx = "${libdir}/*cxx*so" # The dev package
> has the .so link (as in db3) and the .a's - # it is therefore incompatible
> (cannot be installed at the # same time) as the db3 package # sort out the .so
> since they do version prior to the .so SOLIBS = "-6*.so" FILES_SOLIBSDEV =
> "${libdir}/libdb.so ${libdir}/libdb_cxx.so" #configuration - set in local.conf
> to override # All the --disable-* options replace --enable-smallbuild, which
> breaks a bunch of stuff (eg. postfix) DB6_CONFIG ?= "--enable-o_direct
> --disable-cryptography --disable-queue --disable-replication --disable-verify
> --disable-compat185 --disable-sql" EXTRA_OECONF = "${DB6_CONFIG} --enable-shared
> --enable-cxx --with-sysroot" # Override the MUTEX setting here, the POSIX
> library is # the default - "POSIX/pthreads/library". # Don't ignore the nice SWP
> instruction on the ARM: # These enable the ARM assembler mutex code ARM_MUTEX =
> "--with-mutex=ARM/gcc-assembly" MUTEX = "" MUTEX_arm = "${ARM_MUTEX}"
> MUTEX_armeb = "${ARM_MUTEX}" EXTRA_OECONF += "${MUTEX}"
> EXTRA_OEMAKE_class-target =
> "LIBTOOL=${STAGING_BINDIR_CROSS}/${HOST_SYS}-libtool" # Cancel the site stuff -
> it's set for db3 and destroys the # configure. CONFIG_SITE = "" do_configure() {
> gnu-configize --force ${S} export STRIP="true" oe_runconf } do_compile_prepend()
> { sed -i -e 's|hardcode_into_libs=yes|hardcode_into_libs=no|' \ ${B}/libtool }
> do_install_append() { mkdir -p ${D}/${includedir}/db60 mv
> ${D}/${includedir}/db.h ${D}/${includedir}/db60/. mv ${D}/${includedir}/db_cxx.h
> ${D}/${includedir}/db60/. ln -s db60/db.h ${D}/${includedir}/db.h ln -s
> db60/db_cxx.h ${D}/${includedir}/db_cxx.h # The docs end up in /usr/docs - not
> right. if test -d "${D}/${prefix}/docs" then mkdir -p "${D}/${datadir}" test !
> -d "${D}/${docdir}" || rm -rf "${D}/${docdir}" mv "${D}/${prefix}/docs"
> "${D}/${docdir}" fi chown -R root:root ${D} } INSANE_SKIP_${PN} = "dev-so"
> INSANE_SKIP_${PN}-cxx = "dev-so" BBCLASSEXTEND = "native nativesdk" |
>
>
>
> Thanks,
> Chad
>
>
> Cyberlock, Inc. | Videx, Inc. | 1105 NE Circle Blvd. | Corvallis, OR 97330 |
> (541) 738-5500
> This email is intended only for the addressee(s) and may include material that
> is privileged, confidential, and protected from disclosure. No contract is
> intended. ©2019 Videx, Inc.
>
Cyberlock, Inc. | Videx, Inc. | 1105 NE Circle Blvd. | Corvallis, OR 97330 | (541) 738-5500
This email is intended only for the addressee(s) and may include material that is privileged, confidential, and protected from disclosure. No contract is intended. ©2019 Videx, Inc.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openembedded.org/pipermail/openembedded-core/attachments/20190423/85e9fde9/attachment-0001.html>
More information about the Openembedded-core
mailing list