[OE-core] [PATCH 02/16] ifupdown: update 0.8.22 -> 0.8.35

Khem Raj raj.khem at gmail.com
Thu Dec 19 17:03:10 UTC 2019


On Thu, 2019-12-19 at 14:22 +0100, Alexander Kanavin wrote:
> Remove inet-6-.defn-fix-inverted-checks-for-loopback.patch as
> it is difficult to rebase and not clear if still necessary.
> 

perhaps Cc the patch authors and get an opinion ?

> Signed-off-by: Alexander Kanavin <alex.kanavin at gmail.com>
> ---
>  ...efn-fix-inverted-checks-for-loopback.patch | 403 ----------------
> --
>  ...{ifupdown_0.8.22.bb => ifupdown_0.8.35.bb} |  11 +-
>  2 files changed, 5 insertions(+), 409 deletions(-)
>  delete mode 100644 meta/recipes-core/ifupdown/files/inet-6-.defn-
> fix-inverted-checks-for-loopback.patch
>  rename meta/recipes-core/ifupdown/{ifupdown_0.8.22.bb =>
> ifupdown_0.8.35.bb} (83%)
> 
> diff --git a/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-
> inverted-checks-for-loopback.patch b/meta/recipes-
> core/ifupdown/files/inet-6-.defn-fix-inverted-checks-for-
> loopback.patch
> deleted file mode 100644
> index 5b0d51d736f..00000000000
> --- a/meta/recipes-core/ifupdown/files/inet-6-.defn-fix-inverted-
> checks-for-loopback.patch
> +++ /dev/null
> @@ -1,403 +0,0 @@
> -From 6fce99c9e42cbacde1855473b745ca1fded3fbf7 Mon Sep 17 00:00:00
> 2001
> -From: "Maxin B. John" <maxin.john at intel.com>
> -Date: Wed, 21 Dec 2016 15:32:07 +0200
> -Subject: [PATCH 2/2] inet[6].defn: fix inverted checks for loopback
> -
> -Compared to the hurd link.defn for loopback, we see these
> -are inverted, meaning that you would only be able to configure
> -a loopback device that was _not_ named "lo" (unlikely to exist).
> -
> -The result was that we'd update /run/network/ifstate for "lo"
> -but never actually do anything for up/down, as shown below:
> -
> -root at localhost:~# ifconfig -s
> -Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR  TX-OK TX-ERR TX-DRP
> TX-OVR Flg
> -eth0       1500 0   7736329      0   2016 0
> 5289422      0      0      0 BMRU
> -lo        65536 0        18      0      0
> 0      18      0      0      0 LRU
> -root at localhost:~# ifdown lo
> -root at localhost:~# echo $?
> -0
> -root at localhost:~# ifconfig -s
> -Iface   MTU Met   RX-OK RX-ERR RX-DRP  RX-OVR    TX-OK TX-ERR TX-DRP 
> TX-OVR Flg
> -eth0       1500 0   7736406      0  2016
> 0   5289455      0      0      0 BMRU
> -lo        65536 0        18      0   0
> 0            18    0    0    0     LRU
> -root at localhost:~# ifconfig lo down
> -root at localhost:~# ifconfig -s
> -Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR    TX-OK TX-ERR TX-DRP
> TX-OVR Flg
> -eth0       1500 0   7736474 0   2016
> 0       5289481      0     0      0 BMRU
> -root at localhost:~#
> -
> -Also reverted the commit:
> -commit 80b878497663dae08f70b4d3cffe127b57a3cfc
> -which uses absolute paths to binaries called by ifup/ifdown.
> -
> -Upstream-Status: Inappropriate [OE specific]
> -
> -Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
> -Signed-off-by: Maxin B. John <maxin.john at intel.com>
> -Signed-off-by: Yi Zhao <yi.zhao at windriver.com>
> ----
> - inet.defn | 134 +++++++++++++++++++++++++++----------------------
> -----
> - 1 file changed, 67 insertions(+), 67 deletions(-)
> -
> -diff --git a/inet.defn b/inet.defn
> -index 182b56b..31067bc 100644
> ---- a/inet.defn
> -+++ b/inet.defn
> -@@ -6,10 +6,10 @@ method loopback
> -     This method may be used to define the IPv4 loopback interface.
> - 
> -   up
> --    /bin/ip link set dev %iface% up if (!iface_is_lo())
> -+    ip link set dev %iface% up if (!iface_is_lo())
> - 
> -   down
> --    /bin/ip link set dev %iface% down if (!iface_is_lo())
> -+    ip link set dev %iface% down if (!iface_is_lo())
> - 
> - method static
> -   description
> -@@ -36,17 +36,17 @@ method static
> -     broadcast compute_v4_broadcast
> - 
> -   up
> --    /bin/ip addr add %address%[[/%netmask%]] [[broadcast
> %broadcast%]] \
> -+    ip addr add %address%[[/%netmask%]] [[broadcast %broadcast%]] \
> - 	[[peer %pointopoint%]] [[scope %scope%]] dev %iface% label
> %iface%
> --    /bin/ip link set dev %iface% [[mtu %mtu%]] [[address
> %hwaddress%]] up
> -+    ip link set dev %iface% [[mtu %mtu%]] [[address %hwaddress%]]
> up
> - 
> --    [[ /bin/ip route add default via %gateway% [[metric %metric%]]
> dev %iface% onlink ]]
> -+    [[ ip route add default via %gateway% [[metric %metric%]] dev
> %iface% onlink ]]
> - 
> -   down
> --    [[ /bin/ip route del default via %gateway% [[metric %metric%]]
> dev %iface% 2>&1 1>/dev/null || true ]]
> --    /bin/ip addr del %address%[[/%netmask%]] [[broadcast
> %broadcast%]] \
> -+    [[ ip route del default via %gateway% [[metric %metric%]] dev
> %iface% 2>&1 1>/dev/null || true ]]
> -+    ip addr del %address%[[/%netmask%]] [[broadcast %broadcast%]] \
> - 	[[peer %pointopoint%]] [[scope %scope%]] dev %iface% label
> %iface%
> --    /bin/ip link set dev %iface% down \
> -+    ip link set dev %iface% down \
> - 		if (iface_is_link())
> - 
> - method manual
> -@@ -63,12 +63,12 @@ method manual
> -     hwaddress cleanup_hwaddress
> - 
> -   up
> --    [[/bin/ip link set dev %iface% mtu %mtu%]]
> --    [[/bin/ip link set dev %iface% address %hwaddress%]]
> --    /bin/ip link set dev %iface% up 2>/dev/null || true
> -+    [[ip link set dev %iface% mtu %mtu%]]
> -+    [[ip link set dev %iface% address %hwaddress%]]
> -+    ip link set dev %iface% up 2>/dev/null || true
> - 
> -   down
> --    /bin/ip link set dev %iface% down 2>/dev/null || true \
> -+    ip link set dev %iface% down 2>/dev/null || true \
> -         if (iface_is_link() && !do_all)
> - 
> - method dhcp
> -@@ -93,33 +93,33 @@ method dhcp
> -     hwaddress cleanup_hwaddress
> - 
> -   up
> --    [[/bin/ip link set dev %iface% address %hwaddress%]]
> --    /sbin/dhclient -4 -v -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> -+    [[ip link set dev %iface% address %hwaddress%]]
> -+    dhclient -4 -v -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> - 	[[-e IF_METRIC=%metric%]] \
> -         if (execable("/sbin/dhclient"))
> --    /sbin/pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \
> -+    pump -i %iface% [[-h %hostname%]] [[-l %leasehours%]] \
> -         elsif (execable("/sbin/pump"))
> --    /sbin/udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-x
> hostname:%hostname%]] \
> -+    udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-x
> hostname:%hostname%]] \
> -         elsif (execable("/sbin/udhcpc"))
> --    /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]]
> \
> -+    dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
> -            [[-l %leasetime%]] [[-m %metric%]] %iface% \
> -         elsif (execable("/sbin/dhcpcd"))
> -     echo 'No DHCP client software found!' >/dev/stderr; false \
> -         elsif (1)
> - 
> -   down
> --    /sbin/dhclient -4 -v -r -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> -+    dhclient -4 -v -r -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> -         if (execable("/sbin/dhclient"))
> --    /sbin/pump -i %iface% -r \
> -+    pump -i %iface% -r \
> -         elsif (execable("/sbin/pump"))
> -     if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(/bin/cat
> /run/udhcpc.%iface%.pid); kill -TERM $(/bin/cat
> /run/udhcpc.%iface%.pid); fi \
> -         elsif (execable("/sbin/udhcpc"))
> --    /sbin/dhcpcd -k %iface% \
> -+    dhcpcd -k %iface% \
> -         elsif (execable("/sbin/dhcpcd"))
> -     echo 'No DHCP client software found!' >/dev/stderr; false \
> -         elsif (1)
> - 
> --    /bin/ip link set dev %iface% down \
> -+    ip link set dev %iface% down \
> - 		if (iface_is_link())
> - 
> - method bootp
> -@@ -134,11 +134,11 @@ method bootp
> -                       whatever it really is.
> - 
> -   up
> --    /sbin/bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server
> %server%]] \
> -+    bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server
> %server%]] \
> -            [[--hwaddr %hwaddr%]] --returniffail --serverbcast
> - 
> -   down
> --    /bin/ip link set dev %iface% down \
> -+    ip link set dev %iface% down \
> -         if (iface_is_link())
> - 
> - method tunnel
> -@@ -158,13 +158,13 @@ method tunnel
> -     ttl time              -- TTL setting
> -     mtu size              -- MTU size
> -   up
> --    /bin/ip tunnel add %iface% mode %mode% remote %endpoint%
> [[local %local%]] \
> -+    ip tunnel add %iface% mode %mode% remote %endpoint% [[local
> %local%]] \
> -        [[ttl %ttl%]]
> --    /bin/ip link set %iface% up [[mtu %mtu%]]
> --    /bin/ip addr add %address%/%netmask% dev %iface% [[peer
> %dstaddr%]]
> --    [[ /bin/ip route add default via %gateway% [[metric %metric%]]
> dev %iface% onlink ]]
> -+    ip link set %iface% up [[mtu %mtu%]]
> -+    ip addr add %address%/%netmask% dev %iface% [[peer %dstaddr%]]
> -+    [[ ip route add default via %gateway% [[metric %metric%]] dev
> %iface% onlink ]]
> -   down
> --    /bin/ip tunnel del %iface%
> -+    ip tunnel del %iface%
> - 
> - method ppp
> -   description
> -@@ -175,9 +175,9 @@ method ppp
> -     unit number    -- Use /number/ as the ppp unit number.
> -     options string -- Pass /string/ as additional options to pon.
> -   up
> --    /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]]
> -+    pon [[%provider%]] [[unit %unit%]] [[%options%]]
> -   down
> --    /usr/bin/poff [[%provider%]]
> -+    poff [[%provider%]]
> - 
> - method wvdial
> -   description
> -@@ -186,10 +186,10 @@ method wvdial
> -   options
> -     provider name  -- Use /name/ as the provider (from
> /etc/wvdial.conf).
> -   up
> --    /sbin/start-stop-daemon --start -x /usr/bin/wvdial \
> -+    start-stop-daemon --start -x /usr/bin/wvdial \
> -                       -p /run/wvdial.%iface%.pid -b -m -- [[
> %provider% ]]
> -   down
> --    /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \
> -+    start-stop-daemon --stop -x /usr/bin/wvdial \
> -                       -p /run/wvdial.%iface%.pid -s 2
> - 
> - 
> -@@ -200,9 +200,9 @@ method ipv4ll
> -     known as APIPA or IPAC, and often colloquially referred to
> -     as "Zeroconf address".
> -   up
> --    /usr/sbin/avahi-autoipd -D %iface%
> -+    avahi-autoipd -D %iface%
> -   down
> --    /usr/sbin/avahi-autoipd --kill %iface%
> -+    avahi-autoipd --kill %iface%
> - 
> - architecture kfreebsd
> - 
> -@@ -211,11 +211,11 @@ method loopback
> -     This method may be used to define the IPv4 loopback interface.
> - 
> -   up
> --    /sbin/ifconfig %iface% 127.0.0.1 up \
> -+    ifconfig %iface% 127.0.0.1 up \
> - 	if (!iface_is_lo())
> - 
> -   down
> --    /sbin/ifconfig %iface% down \
> -+    ifconfig %iface% down \
> - 	if (!iface_is_lo())
> - 
> - method static
> -@@ -238,15 +238,15 @@ method static
> -     hwaddress cleanup_hwaddress
> - 
> -   up
> --    [[ /sbin/ifconfig %iface% link %hwaddress%]]
> --    /sbin/ifconfig %iface% %address% [[netmask %netmask%]]
> [[broadcast %broadcast%]] \
> -+    [[ ifconfig %iface% link %hwaddress%]]
> -+    ifconfig %iface% %address% [[netmask %netmask%]] [[broadcast
> %broadcast%]] \
> - 	[[pointopoint %pointopoint%]] [[media %media%]] [[mtu %mtu%]] \
> - 	up
> --    [[ /sbin/route add default %gateway% ]]
> -+    [[ route add default %gateway% ]]
> - 
> -   down
> --    [[ /sbin/route del default %gateway% 2>&1 1>/dev/null || true
> ]]
> --    /sbin/ifconfig %iface% down
> -+    [[ route del default %gateway% 2>&1 1>/dev/null || true ]]
> -+    ifconfig %iface% down
> - 
> - method manual
> -   description
> -@@ -279,30 +279,30 @@ method dhcp
> -     hwaddress cleanup_hwaddress
> - 
> -   up
> --    [[/sbin/ifconfig %iface% link %hwaddress%]]
> --    /sbin/dhclient -4 -v -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> -+    [[ifconfig %iface% link %hwaddress%]]
> -+    dhclient -4 -v -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> - 	[[-e IF_METRIC=%metric%]] \
> -         if (execable("/sbin/dhclient"))
> --    /sbin/udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H
> %hostname%]] \
> -+    udhcpc -n -p /run/udhcpc.%iface%.pid -i %iface% [[-H
> %hostname%]] \
> -            [[-c %client%]] \
> -         elsif (execable("/sbin/udhcpc"))
> --    /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]]
> \
> -+    dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
> -            [[-l %leasetime%]] %iface% \
> -         elsif (execable("/sbin/dhcpcd"))
> -     echo 'No DHCP client software found!' >/dev/stderr; false \
> -         elsif (1)
> - 
> -   down
> --    /sbin/dhclient -4 -v -r -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> -+    dhclient -4 -v -r -pf /run/dhclient.%iface%.pid -lf
> /var/lib/dhcp/dhclient.%iface%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface%.leases %iface% \
> -         if (execable("/sbin/dhclient"))
> -     if test -f /run/udhcpc.%iface%.pid; then kill -USR2 $(/bin/cat
> /run/udhcpc.%iface%.pid); kill -TERM $(/bin/cat
> /run/udhcpc.%iface%.pid); fi \
> -         elsif (execable("/sbin/udhcpc"))
> --    /sbin/dhcpcd -k %iface% \
> -+    dhcpcd -k %iface% \
> -         elsif (execable("/sbin/dhcpcd"))
> -     echo 'No DHCP client software found!' >/dev/stderr; false \
> -         elsif (1)
> - 
> --    /sbin/ifconfig %iface% down
> -+    ifconfig %iface% down
> - 
> - method bootp
> -   description
> -@@ -316,11 +316,11 @@ method bootp
> -                       whatever it really is.
> - 
> -   up
> --    /sbin/bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server
> %server%]] \
> -+    bootpc [[--bootfile %bootfile%]] --dev %iface% [[--server
> %server%]] \
> -            [[--hwaddr %hwaddr%]] --returniffail --serverbcast
> - 
> -   down
> --    /sbin/ifconfig %iface% down
> -+    ifconfig %iface% down
> - 
> - method ppp
> -   description
> -@@ -331,9 +331,9 @@ method ppp
> -     unit number    -- Use /number/ as the ppp unit number.
> -     options string -- Pass /string/ as additional options to pon.
> -   up
> --    /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]]
> -+    pon [[%provider%]] [[unit %unit%]] [[%options%]]
> -   down
> --    /usr/bin/poff [[%provider%]]
> -+    poff [[%provider%]]
> - 
> - method wvdial
> -   description
> -@@ -342,10 +342,10 @@ method wvdial
> -   options
> -     provider name  -- Use /name/ as the provider (from
> /etc/wvdial.conf).
> -   up
> --    /sbin/start-stop-daemon --start -x /usr/bin/wvdial \
> -+    start-stop-daemon --start -x /usr/bin/wvdial \
> -                       -p /run/wvdial.%iface%.pid -b -m -- [[
> %provider% ]]
> -   down
> --    /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \
> -+    start-stop-daemon --stop -x /usr/bin/wvdial \
> -                       -p /run/wvdial.%iface%.pid -s 2
> - 
> - 
> -@@ -356,9 +356,9 @@ method ipv4ll
> -     known as APIPA or IPAC, and often colloquially referred to
> -     as "Zeroconf address".
> -   up
> --    /usr/sbin/avahi-autoipd -D %iface%
> -+    avahi-autoipd -D %iface%
> -   down
> --    /usr/sbin/avahi-autoipd --kill %iface%
> -+    avahi-autoipd --kill %iface%
> - architecture hurd
> - 
> - method loopback
> -@@ -432,23 +432,23 @@ method dhcp
> - 
> -   up
> -     [[Warning: Option hwaddress: %hwaddress% not yet supported]]
> --    /sbin/dhclient -4 -v -pf /run/dhclient.%iface///.%.pid -lf
> /var/lib/dhcp/dhclient.%iface///.%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
> -+    dhclient -4 -v -pf /run/dhclient.%iface///.%.pid -lf
> /var/lib/dhcp/dhclient.%iface///.%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
> -         if (execable("/sbin/dhclient"))
> --    /sbin/udhcpc -n -p /run/udhcpc.%iface///.%.pid -i %iface% [[-H
> %hostname%]] \
> -+    udhcpc -n -p /run/udhcpc.%iface///.%.pid -i %iface% [[-H
> %hostname%]] \
> -            [[-c %client%]] \
> -         elsif (execable("/sbin/udhcpc"))
> --    /sbin/dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]]
> \
> -+    dhcpcd [[-h %hostname%]] [[-i %vendor%]] [[-I %client%]] \
> -            [[-l %leasetime%]] %iface% \
> -         elsif (execable("/sbin/dhcpcd"))
> -     echo 'No DHCP client software found!' >/dev/stderr; false \
> -         elsif (1)
> - 
> -   down
> --    /sbin/dhclient -4 -v -r -pf /run/dhclient.%iface///.%.pid -lf
> /var/lib/dhcp/dhclient.%iface///.%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
> -+    dhclient -4 -v -r -pf /run/dhclient.%iface///.%.pid -lf
> /var/lib/dhcp/dhclient.%iface///.%.leases -I -df
> /var/lib/dhcp/dhclient6.%iface///.%.leases %iface% \
> -         if (execable("/sbin/dhclient"))
> -     if test -f /run/udhcpc.%iface///.%.pid; then kill -USR2
> $(/bin/cat /run/udhcpc.%iface///.%.pid); kill -TERM $(/bin/cat
> /run/udhcpc.%iface///.%.pid); fi \
> -         elsif (execable("/sbin/udhcpc"))
> --    /sbin/dhcpcd -k %iface% \
> -+    dhcpcd -k %iface% \
> -         elsif (execable("/sbin/dhcpcd"))
> -     echo 'No DHCP client software found!' >/dev/stderr; false \
> -         elsif (1)
> -@@ -482,9 +482,9 @@ method ppp
> -     unit number    -- Use /number/ as the ppp unit number.
> -     options string -- Pass /string/ as additional options to pon.
> -   up
> --    /usr/bin/pon [[%provider%]] [[unit %unit%]] [[%options%]]
> -+    pon [[%provider%]] [[unit %unit%]] [[%options%]]
> -   down
> --    /usr/bin/poff [[%provider%]]
> -+    poff [[%provider%]]
> - 
> - method wvdial
> -   description
> -@@ -493,10 +493,10 @@ method wvdial
> -   options
> -     provider name  -- Use /name/ as the provider (from
> /etc/wvdial.conf).
> -   up
> --    /sbin/start-stop-daemon --start -x /usr/bin/wvdial \
> -+    start-stop-daemon --start -x /usr/bin/wvdial \
> -                       -p /run/wvdial.%iface///.%.pid -b -m -- [[
> %provider% ]]
> -   down
> --    /sbin/start-stop-daemon --stop -x /usr/bin/wvdial \
> -+    start-stop-daemon --stop -x /usr/bin/wvdial \
> -                       -p /run/wvdial.%iface///.%.pid -s 2
> - 
> - 
> -@@ -507,6 +507,6 @@ method ipv4ll
> -     known as APIPA or IPAC, and often colloquially referred to
> -     as "Zeroconf address".
> -   up
> --    /usr/sbin/avahi-autoipd -D %iface%
> -+    avahi-autoipd -D %iface%
> -   down
> --    /usr/sbin/avahi-autoipd --kill %iface%
> -+    avahi-autoipd --kill %iface%
> --- 
> -2.17.1
> -
> diff --git a/meta/recipes-core/ifupdown/ifupdown_0.8.22.bb
> b/meta/recipes-core/ifupdown/ifupdown_0.8.35.bb
> similarity index 83%
> rename from meta/recipes-core/ifupdown/ifupdown_0.8.22.bb
> rename to meta/recipes-core/ifupdown/ifupdown_0.8.35.bb
> index bd0989e8855..de8e1cf66ba 100644
> --- a/meta/recipes-core/ifupdown/ifupdown_0.8.22.bb
> +++ b/meta/recipes-core/ifupdown/ifupdown_0.8.35.bb
> @@ -7,12 +7,11 @@ LICENSE = "GPLv2"
>  LIC_FILES_CHKSUM =
> "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
>  
>  SRC_URI = "git://salsa.debian.org/debian/ifupdown.git;protocol=https
> \
> -	   file://defn2-c-man-don-t-rely-on-dpkg-architecture-to-set-
> a.patch \
> -	   file://inet-6-.defn-fix-inverted-checks-for-loopback.patch \
> -	   file://99_network \
> -	   file://0001-Define-FNM_EXTMATCH-for-musl.patch \
> -	  "
> -SRCREV = "ab5a0f464e53e172316a5ca8b5dcdc49e8848999"
> +           file://defn2-c-man-don-t-rely-on-dpkg-architecture-to-
> set-a.patch \
> +           file://99_network \
> +           file://0001-Define-FNM_EXTMATCH-for-musl.patch \
> +           "
> +SRCREV = "4af76318cfc57f8e4a44d357104188666213bd4b"
>  
>  S = "${WORKDIR}/git"
>  
> -- 
> 2.17.1
> 



More information about the Openembedded-core mailing list