[OE-core] [PATCH 2/2] openssh: usable sshd depends on rngd from rng-tools

[Mikko.Rapeli at bmw.de]

On Fri, May 10, 2019 at 01:18:21PM +0100, Burton, Ross wrote:
> I'm very dubious of the need to make this a dependency, as the
> hardware RNG should be used.  Note that there's been a slew of fixes
> to the kernel to enable this with modern stacks, for example:
> 
> https://github.com/torvalds/linux/commit/62f95ae805fa9e1e84d47d3219adddd97b2654b7
> 
> Maybe the IMX driver needs the same patch?

Possibly. Was running 4.14.89 kernel from NXP.

I would have benefitted from this patch, but it's ok if you reject it.

-Mikko

> Ross
> 
> On Thu, 9 May 2019 at 09:46, Rasmus Villemoes
> <rasmus.villemoes at prevas.dk> wrote:
> >
> > On 08/05/2019 16.22, Mikko.Rapeli at bmw.de wrote:
> > > On Wed, May 08, 2019 at 05:07:08PM +0300, Adrian Bunk wrote:
> > >> On Wed, May 08, 2019 at 04:26:09PM +0300, Mikko Rapeli wrote:
> > >>> Since openssl 1.1.1 and openssh which uses it, sshd
> > >>> startup is delayed. The delays range from few seconds
> > >>> to minutes and even to hours. The delays are visible
> > >>> in host keys generation and when sshd process is started
> > >>> in response to incoming TCP connection but is failing
> > >>> to provide SSH version string and clients or tests time out.
> > >>>
> > >>> In all cases traces show that sshd is waiting for getentropy()
> > >>> system call to return from Linux kernel, which returns only
> > >>> after kernel side random number pool is initialized. The pool
> > >>> is initialized via various entropy source which may be
> > >>> missing on embedded development boards or via rngd from
> > >>> rng-tools package from userspace. HW random number generation
> > >>> and kernel support help but rngd is till needed to feed that data
> > >>> back to the Linux kernel.
> > >>>
> > >>> Example from an NXP imx8 board shows that kernel random number pool
> > >>> initialization can take over 400 seconds without rngd,
> > >>> and with rngd it is initialized at around 4 seconds after boot.
> > >>> The completion of initialization is visible in kernel dmesg with line
> > >>> "random: crng init done".
> > >>> ...
> > >>> --- a/meta/recipes-connectivity/openssh/openssh_7.9p1.bb
> > >>> +++ b/meta/recipes-connectivity/openssh/openssh_7.9p1.bb
> > >>> @@ -148,6 +148,7 @@ FILES_${PN}-keygen = "${bindir}/ssh-keygen"
> > >>>
> > >>>  RDEPENDS_${PN} += "${PN}-scp ${PN}-ssh ${PN}-sshd ${PN}-keygen"
> > >>>  RDEPENDS_${PN}-sshd += "${PN}-keygen ${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'pam-plugin-keyinit pam-plugin-loginuid', '', d)}"
> > >>> +RDEPENDS_${PN}-sshd += "rng-tools"
> > >>> ...
> > >>
> > >> This should only be an RRECOMMENDS so that people can opt out of it.
> > >>
> > >> E.g. CONFIG_RANDOM_TRUST_CPU in the kernel can solve the same
> > >> problem without using rng-tools on some platforms.
> > >
> > > I think this is a stronger dependency than just RRECOMMENDS. We build
> > > images and disable recommends but we care that sshd starts as fast as in
> > > sumo and earlier yocto releases for testing etc purposes.
> >
> > But why should boards without a hwrng be forced to spend disk space and
> > run-time resources on a daemon which they don't benefit from at all?
> >
> > I don't think RANDOM_TRUST_CPU works, though. That's just for stuff like
> > rdrand(), i.e. instructions built into the CPU - not for some other
> > on-chip hwrng. Whether those are used for seeding early on (i.e.,
> > without rngd doing its thing) depends on the ->quality parameter set by
> > the individual hwrng drivers. Very few set one, so they get assigned the
> > default_quality, which is a module parameter that defaults to 0.
> >
> > IOW, I think (but I haven't got around to testing this) one should set
> > rng_core.default_quality=512 (or something) on the kernel command line
> > to make the kernel start the hwrng_fill thread that will seed the
> > entropy pool from the hwrng. At least if I'm reading
> > drivers/char/hw_random/core.c correctly.
> >
> > Rasmus
> >
> >
> >
> >
> > --
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core at lists.openembedded.org
> > http://lists.openembedded.org/mailman/listinfo/openembedded-core