[OE-core] [PATCH 0/2 v4] Add ptest support for coreutils

[Richard Purdie]

On Fri, 2020-02-28 at 06:49 -0800, Trevor Gamblin wrote:
> v4 fixes a multilib issue - do_install_ptest was previously
> using sed to make the d_type-check test point at python3 
> instead of python, but hard-coded the path for the test file.
> 
> Sample test results:
> 
> core-image-minimal:
> MACHINE    | PASS | FAIL | SKIP | TOTAL | TIME (m) |
> qemux86-64 |  472 |    0 |  143 |   615 |      2.5 |
> qemuarm64  |  472 |    0 |  143 |   615 |       51 |
> 
> core-image-sato:
> MACHINE    | PASS | FAIL | SKIP | TOTAL | Time (m) |
> qemux86-64 |  472 |    0 |  143 |   615 |      2.4 |
> qemuarm64  |  472 |    0 |  143 |   615 |       52 |

Sorry Trevor but I think there is an issue here:

https://autobuilder.yoctoproject.org/typhoon/#/builders/79/builds/735/steps/8/logs/step2d
(and on all the other builders)

Its still causing the reproducible build failures for libmodule-build.

The reason it triggers on this patch is without this it isn't included
in the reproducible builds test. I was blaming Tim's upgrade patch!

Cheers,

Richard