[OE-core] runqemu nographic and hvc0

[Khem Raj]

On Thu, Mar 12, 2020 at 9:44 AM Andre McCurdy <armccurdy at gmail.com> wrote:
>
> On Thu, Mar 12, 2020 at 9:13 AM Khem Raj <raj.khem at gmail.com> wrote:
> > On 3/12/20 8:21 AM, Marko, Peter wrote:
> > > Hi,
> > >
> > > I'm trying to boot my own qemu image on zeus branch with "runqemu nographic /path/to/extracted/rootfs" but I have problem that console is flooded with
> > > process '/sbin/getty 115200 hvc0' (pid 383) exited. Scheduling for restart.
> > > starting pid 385, tty '': '/sbin/getty 115200 hvc0'
> > > I'm using yocto qemuarm kernel and qemuarm machine (but it's the same with qemuarm64).
> > >
> > > Basically qemuarm machine has
> > > SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0"
> > > which is transferred to /etc/inittab, however hvc0 device does not exist after booting in nographic mode.
> > >
> > > What kind of configuration am I missing in my image?
> > > I think that might be the graphic console which does not exist in nographic mode?
> >
> > that is correct
> >
> > > Is there a way to get rid of this problem without breaking graphic mode console?
> >
> > I did not find one, it particularly happens with busybox init.
>
> I don't know what the proper fix is, but changing SERIAL_CONSOLES to
> "115200;ttyAMA0" avoids the issue.
>
> I've changed the machine config directly but you could probably also
> use the _qemuarm over-ride to set SERIAL_CONSOLES from local.conf,
> etc, e.g.:
>
>   SERIAL_CONSOLES_qemuarm = "115200;ttyAMA0"

that made -ctestimage fail last time when I tried it but havent tried
it lately maybe things
are better