<div dir="ltr">Hi Saul,<div><br></div><div style>I have verified that it is picking up uuid library from /usr/lib on host. I have submitted patch v8 to correct this.</div><div style><br></div><div style>Regards,</div><div style>
Jonathan</div></div><div class="gmail_extra"><br><br><div class="gmail_quote">On 8 May 2013 06:09, Saul Wold <span dir="ltr"><<a href="mailto:sgw@linux.intel.com" target="_blank">sgw@linux.intel.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
Jonathan,<br>
<br>
This patch still does not address the issue that I mentioned in the last email about the failing to build the native version of isohybrid.<br>
<br>
<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
| gcc -isystem /srv/ssd/sgw/machines/fri2/<u></u>tmp/sysroots/x86_64-linux/usr/<u></u>include -O2 -o isohybrid isohybrid.o isohdpfx.o -luuid<br>
| /usr/bin/ld: cannot find -luuid<br>
</blockquote>
<br>
I mentioned clearly at the end that the -isystem setting to the STAGING_INCDIR is wrong since it does not correctly accound for the libuuid library not being found.<br>
<br>
I read your testing report, you might have uuid/util-linux installed on your host which is causing some host contamination issue.<br>
<br>
Please verify this.<br>
<br>
Thanks<br>
Sau!<div class="HOEnZb"><div class="h5"><br>
<br>
<br>
On 05/06/2013 04:03 PM, Jonathan Liu wrote:<br>
<blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
Patches are now part of upstream or no longer needed.<br>
Added new util-linux dependency for isohybrid.<br>
Paths updated to reflect directory structure changes.<br>
<br>
INCDIR isn't used by the build process during compilation which results<br>
in the compiler not finding uuid/uuid.h from util-linux when compiling<br>
isohybrid unless it exists on the host system. This was fixed by adding<br>
-isystem ${STAGING_INCDIR} to CC when calling make.<br>
<br>
[YOCTO #4438]<br>
<br>
Signed-off-by: Jonathan Liu <<a href="mailto:net147@gmail.com" target="_blank">net147@gmail.com</a>><br>
---<br>
meta/classes/boot-directdisk.<u></u>bbclass | 2 +-<br>
.../syslinux/files/cross-<u></u>build.patch | 71 --<br>
.../libinstaller-Avoid-using-<u></u>linux-ext2_fs.h.patch | 975 ---------------------<br>
.../recipes-devtools/syslinux/<u></u>files/no-strip.patch | 31 -<br>
meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.03.bb" target="_blank">syslinux_4.03.bb</a> | 65 --<br>
meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.06.bb" target="_blank">syslinux_4.06.bb</a> | 62 ++<br>
6 files changed, 63 insertions(+), 1143 deletions(-)<br>
delete mode 100644 meta/recipes-devtools/<u></u>syslinux/files/cross-build.<u></u>patch<br>
delete mode 100644 meta/recipes-devtools/<u></u>syslinux/files/libinstaller-<u></u>Avoid-using-linux-ext2_fs.h.<u></u>patch<br>
delete mode 100644 meta/recipes-devtools/<u></u>syslinux/files/no-strip.patch<br>
delete mode 100644 meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.03.bb" target="_blank">syslinux_4.03.bb</a><br>
create mode 100644 meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.06.bb" target="_blank">syslinux_4.06.bb</a><br>
<br>
diff --git a/meta/classes/boot-<u></u>directdisk.bbclass b/meta/classes/boot-<u></u>directdisk.bbclass<br>
index d265485..1506b42 100644<br>
--- a/meta/classes/boot-<u></u>directdisk.bbclass<br>
+++ b/meta/classes/boot-<u></u>directdisk.bbclass<br>
@@ -82,7 +82,7 @@ build_boot_dd() {<br>
parted $IMAGE print<br>
<br>
OFFSET=`expr $END2 / 512`<br>
- dd if=${STAGING_LIBDIR}/syslinux/<u></u>mbr.bin of=$IMAGE conv=notrunc<br>
+ dd if=${STAGING_DATADIR}/<u></u>syslinux/mbr.bin of=$IMAGE conv=notrunc<br>
dd if=${HDDIMG} of=$IMAGE conv=notrunc seek=1 bs=512<br>
dd if=${ROOTFS} of=$IMAGE conv=notrunc seek=$OFFSET bs=512<br>
<br>
diff --git a/meta/recipes-devtools/<u></u>syslinux/files/cross-build.<u></u>patch b/meta/recipes-devtools/<u></u>syslinux/files/cross-build.<u></u>patch<br>
deleted file mode 100644<br>
index 7bb6bda..0000000<br>
--- a/meta/recipes-devtools/<u></u>syslinux/files/cross-build.<u></u>patch<br>
+++ /dev/null<br>
@@ -1,71 +0,0 @@<br>
-Upstream-Status: Inappropriate [configuration]<br>
-<br>
-Use ?= for Makefile variables to use poky environment variables.<br>
-Original method to sed s/CC =/CC ?=/ is not applicable anymore<br>
-because of the Makefile changes.<br>
-<br>
-against 3.86<br>
-<br>
-06/28/2010 - qhe<br>
-<br>
-also AUXDIR stays in $(LIBDIR)/syslinux rather than $(DATADIR)/syslinux<br>
-<br>
-07/08/2010 - qhe<br>
-<br>
-updated for 4.03<br>
-<br>
-11/16/2010 - Qing He <<a href="mailto:qing.he@intel.com" target="_blank">qing.he@intel.com</a>><br>
-<br>
----<br>
-diff --git a/MCONFIG b/MCONFIG<br>
-index e9c16d3..4d49f33 100644<br>
---- a/MCONFIG<br>
-+++ b/MCONFIG<br>
-@@ -18,13 +18,13 @@<br>
- MAKEFLAGS += -r<br>
- MAKE += -r<br>
-<br>
--BINDIR = /usr/bin<br>
--SBINDIR = /sbin<br>
--LIBDIR = /usr/lib<br>
--DATADIR = /usr/share<br>
--AUXDIR = $(DATADIR)/syslinux<br>
--MANDIR = /usr/man<br>
--INCDIR = /usr/include<br>
-+BINDIR ?= /usr/bin<br>
-+SBINDIR ?= /sbin<br>
-+LIBDIR ?= /usr/lib<br>
-+DATADIR ?= /usr/share<br>
-+AUXDIR = $(LIBDIR)/syslinux<br>
-+MANDIR ?= /usr/man<br>
-+INCDIR ?= /usr/include<br>
- TFTPBOOT = /tftpboot<br>
- COM32DIR = $(AUXDIR)/com32<br>
-<br>
-@@ -38,18 +38,18 @@ PERL = perl<br>
-<br>
- CHMOD = chmod<br>
-<br>
--CC = gcc<br>
-+CC ?= gcc<br>
- gcc_ok = $(shell tmpf=gcc_ok.$$$$.tmp; \<br>
- if $(CC) $(GCCOPT) $(1) -c $(topdir)/dummy.c \<br>
- -o $$tmpf 2>/dev/null ; \<br>
- then echo '$(1)'; else echo '$(2)'; fi; \<br>
- rm -f $$tmpf)<br>
-<br>
--LD = ld<br>
--OBJDUMP = objdump<br>
--OBJCOPY = objcopy<br>
--AR = ar<br>
--NM = nm<br>
--RANLIB = ranlib<br>
-+LD ?= ld<br>
-+OBJDUMP ?= objdump<br>
-+OBJCOPY ?= objcopy<br>
-+AR ?= ar<br>
-+NM ?= nm<br>
-+RANLIB ?= ranlib<br>
- GZIPPROG = gzip<br>
- PNGTOPNM = pngtopnm<br>
- MCOPY = mcopy<br>
diff --git a/meta/recipes-devtools/<u></u>syslinux/files/libinstaller-<u></u>Avoid-using-linux-ext2_fs.h.<u></u>patch b/meta/recipes-devtools/<u></u>syslinux/files/libinstaller-<u></u>Avoid-using-linux-ext2_fs.h.<u></u>patch<br>
deleted file mode 100644<br>
index 77d7a5d..0000000<br>
--- a/meta/recipes-devtools/<u></u>syslinux/files/libinstaller-<u></u>Avoid-using-linux-ext2_fs.h.<u></u>patch<br>
+++ /dev/null<br>
@@ -1,975 +0,0 @@<br>
-From a1006762fa6f98750bb77d76dd992c<u></u>b8ea9f9c99 Mon Sep 17 00:00:00 2001<br>
-Message-Id: <<a href="mailto:a1006762fa6f98750bb77d76dd992cb8ea9f9c99.1333550572.git.dvhart@linux.intel.com" target="_blank">a1006762fa6f98750bb77d76dd992<u></u>cb8ea9f9c99.1333550572.git.<u></u>dvhart@linux.intel.com</a>><br>
-From: "H. Peter Anvin" <<a href="mailto:hpa@zytor.com" target="_blank">hpa@zytor.com</a>><br>
-Date: Mon, 26 Mar 2012 22:51:09 -0700<br>
-Subject: [PATCH] libinstaller: Avoid using <linux/ext2_fs.h><br>
-<br>
-Don't use <linux/ext2_fs.h> if we can avoid it.<br>
-<br>
-Upstream-Status: Available in syslinux-4.06-pre3<br>
-<br>
-The ioctl constants have been globalized and moved to <linux/fs.h>.<br>
-Use a private copy of ext2_fs.h from e2fsprogs with the ioctl<br>
-constants removed for the data structures.<br>
-<br>
-Do at least attempt backward compatibility for old kernel headers, but<br>
-no real hope of proper operation there...<br>
-<br>
-Signed-off-by: H. Peter Anvin <<a href="mailto:hpa@zytor.com" target="_blank">hpa@zytor.com</a>><br>
-<br>
-Massaged into 4.03.<br>
-<br>
-Integrated-by: Darren Hart <<a href="mailto:dvhart@linux.inte.com" target="_blank">dvhart@linux.inte.com</a>><br>
----<br>
- libinstaller/ext2fs/ext2_fs.h | 856 ++++++++++++++++++++++++++++++<u></u>+++++++++++<br>
- libinstaller/linuxioctl.h | 29 ++-<br>
- libinstaller/syslxcom.c | 12 +-<br>
- 3 files changed, 886 insertions(+), 11 deletions(-)<br>
- create mode 100644 libinstaller/ext2fs/ext2_fs.h<br>
-<br>
-Index: syslinux-4.03/libinstaller/<u></u>ext2fs/ext2_fs.h<br>
-=============================<u></u>==============================<u></u>========<br>
---- /dev/null<br>
-+++ syslinux-4.03/libinstaller/<u></u>ext2fs/ext2_fs.h<br>
-@@ -0,0 +1,856 @@<br>
-+/*<br>
-+ * linux/include/linux/ext2_fs.h<br>
-+ *<br>
-+ * Copyright (C) 1992, 1993, 1994, 1995<br>
-+ * Remy Card (<a href="mailto:card@masi.ibp.fr" target="_blank">card@masi.ibp.fr</a>)<br>
-+ * Laboratoire MASI - Institut Blaise Pascal<br>
-+ * Universite Pierre et Marie Curie (Paris VI)<br>
-+ *<br>
-+ * from<br>
-+ *<br>
-+ * linux/include/linux/minix_fs.h<br>
-+ *<br>
-+ * Copyright (C) 1991, 1992 Linus Torvalds<br>
-+ */<br>
-+<br>
-+#ifndef _EXT2FS_EXT2_FS_H<br>
-+#define _EXT2FS_EXT2_FS_H<br>
-+<br>
-+#include <linux/types.h><br>
-+<br>
-+/*<br>
-+ * The second extended filesystem constants/structures<br>
-+ */<br>
-+<br>
-+/*<br>
-+ * Define EXT2FS_DEBUG to produce debug messages<br>
-+ */<br>
-+#undef EXT2FS_DEBUG<br>
-+<br>
-+/*<br>
-+ * Define EXT2_PREALLOCATE to preallocate data blocks for expanding files<br>
-+ */<br>
-+#define EXT2_PREALLOCATE<br>
-+#define EXT2_DEFAULT_PREALLOC_BLOCKS 8<br>
-+<br>
-+/*<br>
-+ * The second extended file system version<br>
-+ */<br>
-+#define EXT2FS_DATE "95/08/09"<br>
-+#define EXT2FS_VERSION "0.5b"<br>
-+<br>
-+/*<br>
-+ * Special inode numbers<br>
-+ */<br>
-+#define EXT2_BAD_INO 1 /* Bad blocks inode */<br>
-+#define EXT2_ROOT_INO 2 /* Root inode */<br>
-+#define EXT4_USR_QUOTA_INO 3 /* User quota inode */<br>
-+#define EXT4_GRP_QUOTA_INO 4 /* Group quota inode */<br>
-+#define EXT2_BOOT_LOADER_INO 5 /* Boot loader inode */<br>
-+#define EXT2_UNDEL_DIR_INO 6 /* Undelete directory inode */<br>
-+#define EXT2_RESIZE_INO 7 /* Reserved group descriptors inode */<br>
-+#define EXT2_JOURNAL_INO 8 /* Journal inode */<br>
-+#define EXT2_EXCLUDE_INO 9 /* The "exclude" inode, for snapshots */<br>
-+#define EXT4_REPLICA_INO 10 /* Used by non-upstream feature */<br>
-+<br>
-+/* First non-reserved inode for old ext2 filesystems */<br>
-+#define EXT2_GOOD_OLD_FIRST_INO 11<br>
-+<br>
-+/*<br>
-+ * The second extended file system magic number<br>
-+ */<br>
-+#define EXT2_SUPER_MAGIC 0xEF53<br>
-+<br>
-+#ifdef __KERNEL__<br>
-+#define EXT2_SB(sb) (&((sb)->u.ext2_sb))<br>
-+#else<br>
-+/* Assume that user mode programs are passing in an ext2fs superblock, not<br>
-+ * a kernel struct super_block. This will allow us to call the feature-test<br>
-+ * macros from user land. */<br>
-+#define EXT2_SB(sb) (sb)<br>
-+#endif<br>
-+<br>
-+/*<br>
-+ * Maximal count of links to a file<br>
-+ */<br>
-+#define EXT2_LINK_MAX 65000<br>
-+<br>
-+/*<br>
-+ * Macro-instructions used to manage several block sizes<br>
-+ */<br>
-+#define EXT2_MIN_BLOCK_LOG_SIZE 10 /* 1024 */<br>
-+#define EXT2_MAX_BLOCK_LOG_SIZE 16 /* 65536 */<br>
-+#define EXT2_MIN_BLOCK_SIZE (1 << EXT2_MIN_BLOCK_LOG_SIZE)<br>
-+#define EXT2_MAX_BLOCK_SIZE (1 << EXT2_MAX_BLOCK_LOG_SIZE)<br>
-+#ifdef __KERNEL__<br>
-+#define EXT2_BLOCK_SIZE(s) ((s)->s_blocksize)<br>
-+#define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits)<br>
-+#define EXT2_ADDR_PER_BLOCK_BITS(s) (EXT2_SB(s)->addr_per_block_<u></u>bits)<br>
-+#define EXT2_INODE_SIZE(s) (EXT2_SB(s)->s_inode_size)<br>
-+#define EXT2_FIRST_INO(s) (EXT2_SB(s)->s_first_ino)<br>
-+#else<br>
-+#define EXT2_BLOCK_SIZE(s) (EXT2_MIN_BLOCK_SIZE << (s)->s_log_block_size)<br>
-+#define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_log_block_size + 10)<br>
-+#define EXT2_INODE_SIZE(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \<br>
-+ EXT2_GOOD_OLD_INODE_SIZE : (s)->s_inode_size)<br>
-+#define EXT2_FIRST_INO(s) (((s)->s_rev_level == EXT2_GOOD_OLD_REV) ? \<br>
-+ EXT2_GOOD_OLD_FIRST_INO : (s)->s_first_ino)<br>
-+#endif<br>
-+#define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof(__u32))<br>
-+<br>
-+/*<br>
-+ * Macro-instructions used to manage allocation clusters<br>
-+ */<br>
-+#define EXT2_MIN_CLUSTER_LOG_SIZE EXT2_MIN_BLOCK_LOG_SIZE<br>
-+#define EXT2_MAX_CLUSTER_LOG_SIZE 29 /* 512MB */<br>
-+#define EXT2_MIN_CLUSTER_SIZE EXT2_MIN_BLOCK_SIZE<br>
-+#define EXT2_MAX_CLUSTER_SIZE (1 << EXT2_MAX_CLUSTER_LOG_SIZE)<br>
-+#define EXT2_CLUSTER_SIZE(s) (EXT2_MIN_BLOCK_SIZE << \<br>
-+ (s)->s_log_cluster_size)<br>
-+#define EXT2_CLUSTER_SIZE_BITS(s) ((s)->s_log_cluster_size + 10)<br>
-+<br>
-+/*<br>
-+ * Macro-instructions used to manage fragments<br>
-+ *<br>
-+ * Note: for backwards compatibility only, for the dump program.<br>
-+ * Ext2/3/4 will never support fragments....<br>
-+ */<br>
-+#define EXT2_MIN_FRAG_SIZE EXT2_MIN_BLOCK_SIZE<br>
-+#define EXT2_MAX_FRAG_SIZE EXT2_MAX_BLOCK_SIZE<br>
-+#define EXT2_MIN_FRAG_LOG_SIZE EXT2_MIN_BLOCK_LOG_SIZE<br>
-+#define EXT2_FRAG_SIZE(s) EXT2_BLOCK_SIZE(s)<br>
-+#define EXT2_FRAGS_PER_BLOCK(s) 1<br>
-+<br>
-+/*<br>
-+ * ACL structures<br>
-+ */<br>
-+struct ext2_acl_header /* Header of Access Control Lists */<br>
-+{<br>
-+ __u32 aclh_size;<br>
-+ __u32 aclh_file_count;<br>
-+ __u32 aclh_acle_count;<br>
-+ __u32 aclh_first_acle;<br>
-+};<br>
-+<br>
-+struct ext2_acl_entry /* Access Control List Entry */<br>
-+{<br>
-+ __u32 acle_size;<br>
-+ __u16 acle_perms; /* Access permissions */<br>
-+ __u16 acle_type; /* Type of entry */<br>
-+ __u16 acle_tag; /* User or group identity */<br>
-+ __u16 acle_pad1;<br>
-+ __u32 acle_next; /* Pointer on next entry for the */<br>
-+ /* same inode or on next free entry */<br>
-+};<br>
-+<br>
-+/*<br>
-+ * Structure of a blocks group descriptor<br>
-+ */<br>
-+struct ext2_group_desc<br>
-+{<br>
-+ __u32 bg_block_bitmap; /* Blocks bitmap block */<br>
-+ __u32 bg_inode_bitmap; /* Inodes bitmap block */<br>
-+ __u32 bg_inode_table; /* Inodes table block */<br>
-+ __u16 bg_free_blocks_count; /* Free blocks count */<br>
-+ __u16 bg_free_inodes_count; /* Free inodes count */<br>
-+ __u16 bg_used_dirs_count; /* Directories count */<br>
-+ __u16 bg_flags;<br>
-+ __u32 bg_exclude_bitmap_lo; /* Exclude bitmap for snapshots */<br>
-+ __u16 bg_block_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */<br>
-+ __u16 bg_inode_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */<br>
-+ __u16 bg_itable_unused; /* Unused inodes count */<br>
-+ __u16 bg_checksum; /* crc16(s_uuid+grouo_num+group_<u></u>desc)*/<br>
-+};<br>
-+<br>
-+/*<br>
-+ * Structure of a blocks group descriptor<br>
-+ */<br>
-+struct ext4_group_desc<br>
-+{<br>
-+ __u32 bg_block_bitmap; /* Blocks bitmap block */<br>
-+ __u32 bg_inode_bitmap; /* Inodes bitmap block */<br>
-+ __u32 bg_inode_table; /* Inodes table block */<br>
-+ __u16 bg_free_blocks_count; /* Free blocks count */<br>
-+ __u16 bg_free_inodes_count; /* Free inodes count */<br>
-+ __u16 bg_used_dirs_count; /* Directories count */<br>
-+ __u16 bg_flags; /* EXT4_BG_flags (INODE_UNINIT, etc) */<br>
-+ __u32 bg_exclude_bitmap_lo; /* Exclude bitmap for snapshots */<br>
-+ __u16 bg_block_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */<br>
-+ __u16 bg_inode_bitmap_csum_lo;/* crc32c(s_uuid+grp_num+bitmap) LSB */<br>
-+ __u16 bg_itable_unused; /* Unused inodes count */<br>
-+ __u16 bg_checksum; /* crc16(sb_uuid+group+desc) */<br>
-+ __u32 bg_block_bitmap_hi; /* Blocks bitmap block MSB */<br>
-+ __u32 bg_inode_bitmap_hi; /* Inodes bitmap block MSB */<br>
-+ __u32 bg_inode_table_hi; /* Inodes table block MSB */<br>
-+ __u16 bg_free_blocks_count_hi;/* Free blocks count MSB */<br>
-+ __u16 bg_free_inodes_count_hi;/* Free inodes count MSB */<br>
-+ __u16 bg_used_dirs_count_hi; /* Directories count MSB */<br>
-+ __u16 bg_itable_unused_hi; /* Unused inodes count MSB */<br>
-+ __u32 bg_exclude_bitmap_hi; /* Exclude bitmap block MSB */<br>
-+ __u16 bg_block_bitmap_csum_hi;/* crc32c(s_uuid+grp_num+bitmap) MSB */<br>
-+ __u16 bg_inode_bitmap_csum_hi;/* crc32c(s_uuid+grp_num+bitmap) MSB */<br>
-+ __u32 bg_reserved;<br>
-+};<br>
-+<br>
-+#define EXT2_BG_INODE_UNINIT 0x0001 /* Inode table/bitmap not initialized */<br>
-+#define EXT2_BG_BLOCK_UNINIT 0x0002 /* Block bitmap not initialized */<br>
-+#define EXT2_BG_INODE_ZEROED 0x0004 /* On-disk itable initialized to zero */<br>
-+<br>
-+/*<br>
-+ * Data structures used by the directory indexing feature<br>
-+ *<br>
-+ * Note: all of the multibyte integer fields are little endian.<br>
-+ */<br>
-+<br>
-+/*<br>
-+ * Note: dx_root_info is laid out so that if it should somehow get<br>
-+ * overlaid by a dirent the two low bits of the hash version will be<br>
-+ * zero. Therefore, the hash version mod 4 should never be 0.<br>
-+ * Sincerely, the paranoia department.<br>
-+ */<br>
-+struct ext2_dx_root_info {<br>
-+ __u32 reserved_zero;<br>
-+ __u8 hash_version; /* 0 now, 1 at release */<br>
-+ __u8 info_length; /* 8 */<br>
-+ __u8 indirect_levels;<br>
-+ __u8 unused_flags;<br>
-+};<br>
-+<br>
-+#define EXT2_HASH_LEGACY 0<br>
-+#define EXT2_HASH_HALF_MD4 1<br>
-+#define EXT2_HASH_TEA 2<br>
-+#define EXT2_HASH_LEGACY_UNSIGNED 3 /* reserved for userspace lib */<br>
-+#define EXT2_HASH_HALF_MD4_UNSIGNED 4 /* reserved for userspace lib */<br>
-+#define EXT2_HASH_TEA_UNSIGNED 5 /* reserved for userspace lib */<br>
-+<br>
-+#define EXT2_HASH_FLAG_INCOMPAT 0x1<br>
-+<br>
-+struct ext2_dx_entry {<br>
-+ __u32 hash;<br>
-+ __u32 block;<br>
-+};<br>
-+<br>
-+struct ext2_dx_countlimit {<br>
-+ __u16 limit;<br>
-+ __u16 count;<br>
-+};<br>
-+<br>
-+<br>
-+/*<br>
-+ * Macro-instructions used to manage group descriptors<br>
-+ */<br>
-+#define EXT2_MIN_DESC_SIZE 32<br>
-+#define EXT2_MIN_DESC_SIZE_64BIT 64<br>
-+#define EXT2_MAX_DESC_SIZE EXT2_MIN_BLOCK_SIZE<br>
-+#define EXT2_DESC_SIZE(s) \<br>
-+ ((EXT2_SB(s)->s_feature_<u></u>incompat & EXT4_FEATURE_INCOMPAT_64BIT) ? \<br>
-+ (s)->s_desc_size : EXT2_MIN_DESC_SIZE)<br>
-+<br>
-+#define EXT2_BLOCKS_PER_GROUP(s) (EXT2_SB(s)->s_blocks_per_<u></u>group)<br>
-+#define EXT2_INODES_PER_GROUP(s) (EXT2_SB(s)->s_inodes_per_<u></u>group)<br>
-+#define EXT2_CLUSTERS_PER_GROUP(s) (EXT2_SB(s)->s_clusters_per_<u></u>group)<br>
-+#define EXT2_INODES_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s)/EXT2_<u></u>INODE_SIZE(s))<br>
-+/* limits imposed by 16-bit value gd_free_{blocks,inode}_count */<br>
-+#define EXT2_MAX_BLOCKS_PER_GROUP(s) ((((unsigned) 1 << 16) - 8) * \<br>
-+ (EXT2_CLUSTER_SIZE(s) / \<br>
-+ EXT2_BLOCK_SIZE(s)))<br>
-+#define EXT2_MAX_CLUSTERS_PER_GROUP(s) (((unsigned) 1 << 16) - 8)<br>
-+#define EXT2_MAX_INODES_PER_GROUP(s) (((unsigned) 1 << 16) - \<br>
-+ EXT2_INODES_PER_BLOCK(s))<br>
-+#ifdef __KERNEL__<br>
-+#define EXT2_DESC_PER_BLOCK(s) (EXT2_SB(s)->s_desc_per_block)<br>
-+#define EXT2_DESC_PER_BLOCK_BITS(s) (EXT2_SB(s)->s_desc_per_block_<u></u>bits)<br>
-+#else<br>
-+#define EXT2_DESC_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / EXT2_DESC_SIZE(s))<br>
-+#endif<br>
-+<br>
-+/*<br>
-+ * Constants relative to the data blocks<br>
-+ */<br>
-+#define EXT2_NDIR_BLOCKS 12<br>
-+#define EXT2_IND_BLOCK EXT2_NDIR_BLOCKS<br>
-+#define EXT2_DIND_BLOCK (EXT2_IND_BLOCK + 1)<br>
-+#define EXT2_TIND_BLOCK (EXT2_DIND_BLOCK + 1)<br>
-+#define EXT2_N_BLOCKS (EXT2_TIND_BLOCK + 1)<br>
-+<br>
-+/*<br>
-+ * Inode flags<br>
-+ */<br>
-+#define EXT2_SECRM_FL 0x00000001 /* Secure deletion */<br>
-+#define EXT2_UNRM_FL 0x00000002 /* Undelete */<br>
-+#define EXT2_COMPR_FL 0x00000004 /* Compress file */<br>
-+#define EXT2_SYNC_FL 0x00000008 /* Synchronous updates */<br>
-+#define EXT2_IMMUTABLE_FL 0x00000010 /* Immutable file */<br>
-+#define EXT2_APPEND_FL 0x00000020 /* writes to file may only append */<br>
-+#define EXT2_NODUMP_FL 0x00000040 /* do not dump file */<br>
-+#define EXT2_NOATIME_FL 0x00000080 /* do not update atime */<br>
-+/* Reserved for compression usage... */<br>
-+#define EXT2_DIRTY_FL 0x00000100<br>
-+#define EXT2_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */<br>
-+#define EXT2_NOCOMPR_FL 0x00000400 /* Access raw compressed data */<br>
-+#define EXT2_ECOMPR_FL 0x00000800 /* Compression error */<br>
-+/* End compression flags --- maybe not all used */<br>
-+#define EXT2_BTREE_FL 0x00001000 /* btree format dir */<br>
-+#define EXT2_INDEX_FL 0x00001000 /* hash-indexed directory */<br>
-+#define EXT2_IMAGIC_FL 0x00002000<br>
-+#define EXT3_JOURNAL_DATA_FL 0x00004000 /* file data should be journaled */<br>
-+#define EXT2_NOTAIL_FL 0x00008000 /* file tail should not be merged */<br>
-+#define EXT2_DIRSYNC_FL 0x00010000 /* Synchronous directory modifications */<br>
-+#define EXT2_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/<br>
-+#define EXT4_HUGE_FILE_FL 0x00040000 /* Set to each huge file */<br>
-+#define EXT4_EXTENTS_FL 0x00080000 /* Inode uses extents */<br>
-+#define EXT4_EA_INODE_FL 0x00200000 /* Inode used for large EA */<br>
-+/* EXT4_EOFBLOCKS_FL 0x00400000 was here */<br>
-+#define EXT4_SNAPFILE_FL 0x01000000 /* Inode is a snapshot */<br>
-+#define EXT4_SNAPFILE_DELETED_FL 0x04000000 /* Snapshot is being deleted */<br>
-+#define EXT4_SNAPFILE_SHRUNK_FL 0x08000000 /* Snapshot shrink has completed */<br>
-+#define EXT2_RESERVED_FL 0x80000000 /* reserved for ext2 lib */<br>
-+<br>
-+#define EXT2_FL_USER_VISIBLE 0x004BDFFF /* User visible flags */<br>
-+#define EXT2_FL_USER_MODIFIABLE 0x004B80FF /* User modifiable flags */<br>
-+<br>
-+/*<br>
-+ * ioctl commands<br>
-+ */<br>
-+<br>
-+/* Used for online resize */<br>
-+struct ext2_new_group_input {<br>
-+ __u32 group; /* Group number for this data */<br>
-+ __u32 block_bitmap; /* Absolute block number of block bitmap */<br>
-+ __u32 inode_bitmap; /* Absolute block number of inode bitmap */<br>
-+ __u32 inode_table; /* Absolute block number of inode table start */<br>
-+ __u32 blocks_count; /* Total number of blocks in this group */<br>
-+ __u16 reserved_blocks; /* Number of reserved blocks in this group */<br>
-+ __u16 unused; /* Number of reserved GDT blocks in group */<br>
-+};<br>
-+<br>
-+struct ext4_new_group_input {<br>
-+ __u32 group; /* Group number for this data */<br>
-+ __u64 block_bitmap; /* Absolute block number of block bitmap */<br>
-+ __u64 inode_bitmap; /* Absolute block number of inode bitmap */<br>
-+ __u64 inode_table; /* Absolute block number of inode table start */<br>
-+ __u32 blocks_count; /* Total number of blocks in this group */<br>
-+ __u16 reserved_blocks; /* Number of reserved blocks in this group */<br>
-+ __u16 unused;<br>
-+};<br>
-+<br>
-+#ifdef __GNU__ /* Needed for the Hurd */<br>
-+#define _IOT_ext2_new_group_input _IOT (_IOTS(__u32), 5, _IOTS(__u16), 2, 0, 0)<br>
-+#endif<br>
-+<br>
-+#define EXT2_IOC_GETFLAGS _IOR('f', 1, long)<br>
-+#define EXT2_IOC_SETFLAGS _IOW('f', 2, long)<br>
-+#define EXT2_IOC_GETVERSION _IOR('v', 1, long)<br>
-+#define EXT2_IOC_SETVERSION _IOW('v', 2, long)<br>
-+#define EXT2_IOC_GETVERSION_NEW _IOR('f', 3, long)<br>
-+#define EXT2_IOC_SETVERSION_NEW _IOW('f', 4, long)<br>
-+#define EXT2_IOC_GROUP_EXTEND _IOW('f', 7, unsigned long)<br>
-+#define EXT2_IOC_GROUP_ADD _IOW('f', 8,struct ext2_new_group_input)<br>
-+#define EXT4_IOC_GROUP_ADD _IOW('f', 8,struct ext4_new_group_input)<br>
-+#define EXT4_IOC_RESIZE_FS _IOW('f', 16, __u64)<br>
-+<br>
-+/*<br>
-+ * Structure of an inode on the disk<br>
-+ */<br>
-+struct ext2_inode {<br>
-+ __u16 i_mode; /* File mode */<br>
-+ __u16 i_uid; /* Low 16 bits of Owner Uid */<br>
-+ __u32 i_size; /* Size in bytes */<br>
-+ __u32 i_atime; /* Access time */<br>
-+ __u32 i_ctime; /* Inode change time */<br>
-+ __u32 i_mtime; /* Modification time */<br>
-+ __u32 i_dtime; /* Deletion Time */<br>
-+ __u16 i_gid; /* Low 16 bits of Group Id */<br>
-+ __u16 i_links_count; /* Links count */<br>
-+ __u32 i_blocks; /* Blocks count */<br>
-+ __u32 i_flags; /* File flags */<br>
-+ union {<br>
-+ struct {<br>
-+ __u32 l_i_version; /* was l_i_reserved1 */<br>
-+ } linux1;<br>
-+ struct {<br>
-+ __u32 h_i_translator;<br>
-+ } hurd1;<br>
-+ } osd1; /* OS dependent 1 */<br>
-+ __u32 i_block[EXT2_N_BLOCKS];/* Pointers to blocks */<br>
-+ __u32 i_generation; /* File version (for NFS) */<br>
-+ __u32 i_file_acl; /* File ACL */<br>
-+ __u32 i_size_high; /* Formerly i_dir_acl, directory ACL */<br>
-+ __u32 i_faddr; /* Fragment address */<br>
-+ union {<br>
-+ struct {<br>
-+ __u16 l_i_blocks_hi;<br>
-+ __u16 l_i_file_acl_high;<br>
-+ __u16 l_i_uid_high; /* these 2 fields */<br>
-+ __u16 l_i_gid_high; /* were reserved2[0] */<br>
-+ __u16 l_i_checksum_lo; /* crc32c(uuid+inum+inode) */<br>
-+ __u16 l_i_reserved;<br>
-+ } linux2;<br>
-+ struct {<br>
-+ __u8 h_i_frag; /* Fragment number */<br>
-+ __u8 h_i_fsize; /* Fragment size */<br>
-+ __u16 h_i_mode_high;<br>
-+ __u16 h_i_uid_high;<br>
-+ __u16 h_i_gid_high;<br>
-+ __u32 h_i_author;<br>
-+ } hurd2;<br>
-+ } osd2; /* OS dependent 2 */<br>
-+};<br>
-+<br>
-+/*<br>
-+ * Permanent part of an large inode on the disk<br>
-+ */<br>
-+struct ext2_inode_large {<br>
-+ __u16 i_mode; /* File mode */<br>
-+ __u16 i_uid; /* Low 16 bits of Owner Uid */<br>
-+ __u32 i_size; /* Size in bytes */<br>
-+ __u32 i_atime; /* Access time */<br>
-+ __u32 i_ctime; /* Inode Change time */<br>
-+ __u32 i_mtime; /* Modification time */<br>
-+ __u32 i_dtime; /* Deletion Time */<br>
-+ __u16 i_gid; /* Low 16 bits of Group Id */<br>
-+ __u16 i_links_count; /* Links count */<br>
-+ __u32 i_blocks; /* Blocks count */<br>
-+ __u32 i_flags; /* File flags */<br>
-+ union {<br>
-+ struct {<br>
-+ __u32 l_i_version; /* was l_i_reserved1 */<br>
-+ } linux1;<br>
-+ struct {<br>
-+ __u32 h_i_translator;<br>
-+ } hurd1;<br>
-+ } osd1; /* OS dependent 1 */<br>
-+ __u32 i_block[EXT2_N_BLOCKS];/* Pointers to blocks */<br>
-+ __u32 i_generation; /* File version (for NFS) */<br>
-+ __u32 i_file_acl; /* File ACL */<br>
-+ __u32 i_size_high; /* Formerly i_dir_acl, directory ACL */<br>
-+ __u32 i_faddr; /* Fragment address */<br>
-+ union {<br>
-+ struct {<br>
-+ __u16 l_i_blocks_hi;<br>
-+ __u16 l_i_file_acl_high;<br>
-+ __u16 l_i_uid_high; /* these 2 fields */<br>
-+ __u16 l_i_gid_high; /* were reserved2[0] */<br>
-+ __u16 l_i_checksum_lo; /* crc32c(uuid+inum+inode) */<br>
-+ __u16 l_i_reserved;<br>
-+ } linux2;<br>
-+ struct {<br>
-+ __u8 h_i_frag; /* Fragment number */<br>
-+ __u8 h_i_fsize; /* Fragment size */<br>
-+ __u16 h_i_mode_high;<br>
-+ __u16 h_i_uid_high;<br>
-+ __u16 h_i_gid_high;<br>
-+ __u32 h_i_author;<br>
-+ } hurd2;<br>
-+ } osd2; /* OS dependent 2 */<br>
-+ __u16 i_extra_isize;<br>
-+ __u16 i_checksum_hi; /* crc32c(uuid+inum+inode) */<br>
-+ __u32 i_ctime_extra; /* extra Change time (nsec << 2 | epoch) */<br>
-+ __u32 i_mtime_extra; /* extra Modification time (nsec << 2 | epoch) */<br>
-+ __u32 i_atime_extra; /* extra Access time (nsec << 2 | epoch) */<br>
-+ __u32 i_crtime; /* File creation time */<br>
-+ __u32 i_crtime_extra; /* extra File creation time (nsec << 2 | epoch)*/<br>
-+ __u32 i_version_hi; /* high 32 bits for 64-bit version */<br>
-+};<br>
-+<br>
-+#define i_dir_acl i_size_high<br>
-+<br>
-+#if defined(__KERNEL__) || defined(__linux__)<br>
-+#define i_reserved1 osd1.linux1.l_i_reserved1<br>
-+#define i_frag osd2.linux2.l_i_frag<br>
-+#define i_fsize osd2.linux2.l_i_fsize<br>
-+#define i_uid_low i_uid<br>
-+#define i_gid_low i_gid<br>
-+#define i_uid_high osd2.linux2.l_i_uid_high<br>
-+#define i_gid_high osd2.linux2.l_i_gid_high<br>
-+#else<br>
-+#if defined(__GNU__)<br>
-+<br>
-+#define i_translator osd1.hurd1.h_i_translator<br>
-+#define i_frag osd2.hurd2.h_i_frag;<br>
-+#define i_fsize osd2.hurd2.h_i_fsize;<br>
-+#define i_uid_high osd2.hurd2.h_i_uid_high<br>
-+#define i_gid_high osd2.hurd2.h_i_gid_high<br>
-+#define i_author osd2.hurd2.h_i_author<br>
-+<br>
-+#endif /* __GNU__ */<br>
-+#endif /* defined(__KERNEL__) || defined(__linux__) */<br>
-+<br>
-+#define inode_uid(inode) ((inode).i_uid | (inode).osd2.linux2.l_i_uid_<u></u>high << 16)<br>
-+#define inode_gid(inode) ((inode).i_gid | (inode).osd2.linux2.l_i_gid_<u></u>high << 16)<br>
-+#define ext2fs_set_i_uid_high(inode,x) ((inode).osd2.linux2.l_i_uid_<u></u>high = (x))<br>
-+#define ext2fs_set_i_gid_high(inode,x) ((inode).osd2.linux2.l_i_gid_<u></u>high = (x))<br>
-+<br>
-+/*<br>
-+ * File system states<br>
-+ */<br>
-+#define EXT2_VALID_FS 0x0001 /* Unmounted cleanly */<br>
-+#define EXT2_ERROR_FS 0x0002 /* Errors detected */<br>
-+#define EXT3_ORPHAN_FS 0x0004 /* Orphans being recovered */<br>
-+<br>
-+/*<br>
-+ * Misc. filesystem flags<br>
-+ */<br>
-+#define EXT2_FLAGS_SIGNED_HASH 0x0001 /* Signed dirhash in use */<br>
-+#define EXT2_FLAGS_UNSIGNED_HASH 0x0002 /* Unsigned dirhash in use */<br>
-+#define EXT2_FLAGS_TEST_FILESYS 0x0004 /* OK for use on development code */<br>
-+#define EXT2_FLAGS_IS_SNAPSHOT 0x0010 /* This is a snapshot image */<br>
-+#define EXT2_FLAGS_FIX_SNAPSHOT 0x0020 /* Snapshot inodes corrupted */<br>
-+#define EXT2_FLAGS_FIX_EXCLUDE 0x0040 /* Exclude bitmaps corrupted */<br>
-+<br>
-+/*<br>
-+ * Mount flags<br>
-+ */<br>
-+#define EXT2_MOUNT_CHECK 0x0001 /* Do mount-time checks */<br>
-+#define EXT2_MOUNT_GRPID 0x0004 /* Create files with directory's group */<br>
-+#define EXT2_MOUNT_DEBUG 0x0008 /* Some debugging messages */<br>
-+#define EXT2_MOUNT_ERRORS_CONT 0x0010 /* Continue on errors */<br>
-+#define EXT2_MOUNT_ERRORS_RO 0x0020 /* Remount fs ro on errors */<br>
-+#define EXT2_MOUNT_ERRORS_PANIC 0x0040 /* Panic on errors */<br>
-+#define EXT2_MOUNT_MINIX_DF 0x0080 /* Mimics the Minix statfs */<br>
-+#define EXT2_MOUNT_NO_UID32 0x0200 /* Disable 32-bit UIDs */<br>
-+<br>
-+#define clear_opt(o, opt) o &= ~EXT2_MOUNT_##opt<br>
-+#define set_opt(o, opt) o |= EXT2_MOUNT_##opt<br>
-+#define test_opt(sb, opt) (EXT2_SB(sb)->s_mount_opt & \<br>
-+ EXT2_MOUNT_##opt)<br>
-+/*<br>
-+ * Maximal mount counts between two filesystem checks<br>
-+ */<br>
-+#define EXT2_DFL_MAX_MNT_COUNT 20 /* Allow 20 mounts */<br>
-+#define EXT2_DFL_CHECKINTERVAL 0 /* Don't use interval check */<br>
-+<br>
-+/*<br>
-+ * Behaviour when detecting errors<br>
-+ */<br>
-+#define EXT2_ERRORS_CONTINUE 1 /* Continue execution */<br>
-+#define EXT2_ERRORS_RO 2 /* Remount fs read-only */<br>
-+#define EXT2_ERRORS_PANIC 3 /* Panic */<br>
-+#define EXT2_ERRORS_DEFAULT EXT2_ERRORS_CONTINUE<br>
-+<br>
-+#if (__GNUC__ >= 4)<br>
-+#define ext4_offsetof(TYPE,MEMBER) __builtin_offsetof(TYPE,<u></u>MEMBER)<br>
-+#else<br>
-+#define ext4_offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)<br>
-+#endif<br>
-+<br>
-+/*<br>
-+ * Structure of the super block<br>
-+ */<br>
-+struct ext2_super_block {<br>
-+ __u32 s_inodes_count; /* Inodes count */<br>
-+ __u32 s_blocks_count; /* Blocks count */<br>
-+ __u32 s_r_blocks_count; /* Reserved blocks count */<br>
-+ __u32 s_free_blocks_count; /* Free blocks count */<br>
-+ __u32 s_free_inodes_count; /* Free inodes count */<br>
-+ __u32 s_first_data_block; /* First Data Block */<br>
-+ __u32 s_log_block_size; /* Block size */<br>
-+ __u32 s_log_cluster_size; /* Allocation cluster size */<br>
-+ __u32 s_blocks_per_group; /* # Blocks per group */<br>
-+ __u32 s_clusters_per_group; /* # Fragments per group */<br>
-+ __u32 s_inodes_per_group; /* # Inodes per group */<br>
-+ __u32 s_mtime; /* Mount time */<br>
-+ __u32 s_wtime; /* Write time */<br>
-+ __u16 s_mnt_count; /* Mount count */<br>
-+ __s16 s_max_mnt_count; /* Maximal mount count */<br>
-+ __u16 s_magic; /* Magic signature */<br>
-+ __u16 s_state; /* File system state */<br>
-+ __u16 s_errors; /* Behaviour when detecting errors */<br>
-+ __u16 s_minor_rev_level; /* minor revision level */<br>
-+ __u32 s_lastcheck; /* time of last check */<br>
-+ __u32 s_checkinterval; /* max. time between checks */<br>
-+ __u32 s_creator_os; /* OS */<br>
-+ __u32 s_rev_level; /* Revision level */<br>
-+ __u16 s_def_resuid; /* Default uid for reserved blocks */<br>
-+ __u16 s_def_resgid; /* Default gid for reserved blocks */<br>
-+ /*<br>
-+ * These fields are for EXT2_DYNAMIC_REV superblocks only.<br>
-+ *<br>
-+ * Note: the difference between the compatible feature set and<br>
-+ * the incompatible feature set is that if there is a bit set<br>
-+ * in the incompatible feature set that the kernel doesn't<br>
-+ * know about, it should refuse to mount the filesystem.<br>
-+ *<br>
-+ * e2fsck's requirements are more strict; if it doesn't know<br>
-+ * about a feature in either the compatible or incompatible<br>
-+ * feature set, it must abort and not try to meddle with<br>
-+ * things it doesn't understand...<br>
-+ */<br>
-+ __u32 s_first_ino; /* First non-reserved inode */<br>
-+ __u16 s_inode_size; /* size of inode structure */<br>
-+ __u16 s_block_group_nr; /* block group # of this superblock */<br>
-+ __u32 s_feature_compat; /* compatible feature set */<br>
-+ __u32 s_feature_incompat; /* incompatible feature set */<br>
-+ __u32 s_feature_ro_compat; /* readonly-compatible feature set */<br>
-+ __u8 s_uuid[16]; /* 128-bit uuid for volume */<br>
-+ char s_volume_name[16]; /* volume name */<br>
-+ char s_last_mounted[64]; /* directory where last mounted */<br>
-+ __u32 s_algorithm_usage_bitmap; /* For compression */<br>
-+ /*<br>
-+ * Performance hints. Directory preallocation should only<br>
-+ * happen if the EXT2_FEATURE_COMPAT_DIR_<u></u>PREALLOC flag is on.<br>
-+ */<br>
-+ __u8 s_prealloc_blocks; /* Nr of blocks to try to preallocate*/<br>
-+ __u8 s_prealloc_dir_blocks; /* Nr to preallocate for dirs */<br>
-+ __u16 s_reserved_gdt_blocks; /* Per group table for online growth */<br>
-+ /*<br>
-+ * Journaling support valid if EXT2_FEATURE_COMPAT_HAS_<u></u>JOURNAL set.<br>
-+ */<br>
-+ __u8 s_journal_uuid[16]; /* uuid of journal superblock */<br>
-+ __u32 s_journal_inum; /* inode number of journal file */<br>
-+ __u32 s_journal_dev; /* device number of journal file */<br>
-+ __u32 s_last_orphan; /* start of list of inodes to delete */<br>
-+ __u32 s_hash_seed[4]; /* HTREE hash seed */<br>
-+ __u8 s_def_hash_version; /* Default hash version to use */<br>
-+ __u8 s_jnl_backup_type; /* Default type of journal backup */<br>
-+ __u16 s_desc_size; /* Group desc. size: INCOMPAT_64BIT */<br>
-+ __u32 s_default_mount_opts;<br>
-+ __u32 s_first_meta_bg; /* First metablock group */<br>
-+ __u32 s_mkfs_time; /* When the filesystem was created */<br>
-+ __u32 s_jnl_blocks[17]; /* Backup of the journal inode */<br>
-+ __u32 s_blocks_count_hi; /* Blocks count high 32bits */<br>
-+ __u32 s_r_blocks_count_hi; /* Reserved blocks count high 32 bits*/<br>
-+ __u32 s_free_blocks_hi; /* Free blocks count */<br>
-+ __u16 s_min_extra_isize; /* All inodes have at least # bytes */<br>
-+ __u16 s_want_extra_isize; /* New inodes should reserve # bytes */<br>
-+ __u32 s_flags; /* Miscellaneous flags */<br>
-+ __u16 s_raid_stride; /* RAID stride */<br>
-+ __u16 s_mmp_update_interval; /* # seconds to wait in MMP checking */<br>
-+ __u64 s_mmp_block; /* Block for multi-mount protection */<br>
-+ __u32 s_raid_stripe_width; /* blocks on all data disks (N*stride)*/<br>
-+ __u8 s_log_groups_per_flex; /* FLEX_BG group size */<br>
-+ __u8 s_reserved_char_pad;<br>
-+ __u16 s_reserved_pad; /* Padding to next 32bits */<br>
-+ __u64 s_kbytes_written; /* nr of lifetime kilobytes written */<br>
-+ __u32 s_snapshot_inum; /* Inode number of active snapshot */<br>
-+ __u32 s_snapshot_id; /* sequential ID of active snapshot */<br>
-+ __u64 s_snapshot_r_blocks_count; /* reserved blocks for active<br>
-+ snapshot's future use */<br>
-+ __u32 s_snapshot_list; /* inode number of the head of the on-disk snapshot list */<br>
-+#define EXT4_S_ERR_START ext4_offsetof(struct ext2_super_block, s_error_count)<br>
-+ __u32 s_error_count; /* number of fs errors */<br>
-+ __u32 s_first_error_time; /* first time an error happened */<br>
-+ __u32 s_first_error_ino; /* inode involved in first error */<br>
-+ __u64 s_first_error_block; /* block involved of first error */<br>
-+ __u8 s_first_error_func[32]; /* function where the error happened */<br>
-+ __u32 s_first_error_line; /* line number where error happened */<br>
-+ __u32 s_last_error_time; /* most recent time of an error */<br>
-+ __u32 s_last_error_ino; /* inode involved in last error */<br>
-+ __u32 s_last_error_line; /* line number where error happened */<br>
-+ __u64 s_last_error_block; /* block involved of last error */<br>
-+ __u8 s_last_error_func[32]; /* function where the error happened */<br>
-+#define EXT4_S_ERR_END ext4_offsetof(struct ext2_super_block, s_mount_opts)<br>
-+ __u8 s_mount_opts[64];<br>
-+ __u32 s_usr_quota_inum; /* inode number of user quota file */<br>
-+ __u32 s_grp_quota_inum; /* inode number of group quota file */<br>
-+ __u32 s_overhead_blocks; /* overhead blocks/clusters in fs */<br>
-+ __u32 s_reserved[108]; /* Padding to the end of the block */<br>
-+ __u32 s_checksum; /* crc32c(superblock) */<br>
-+};<br>
-+<br>
-+#define EXT4_S_ERR_LEN (EXT4_S_ERR_END - EXT4_S_ERR_START)<br>
-+<br>
-+/*<br>
-+ * Codes for operating systems<br>
-+ */<br>
-+#define EXT2_OS_LINUX 0<br>
-+#define EXT2_OS_HURD 1<br>
-+#define EXT2_OBSO_OS_MASIX 2<br>
-+#define EXT2_OS_FREEBSD 3<br>
-+#define EXT2_OS_LITES 4<br>
-+<br>
-+/*<br>
-+ * Revision levels<br>
-+ */<br>
-+#define EXT2_GOOD_OLD_REV 0 /* The good old (original) format */<br>
-+#define EXT2_DYNAMIC_REV 1 /* V2 format w/ dynamic inode sizes */<br>
-+<br>
-+#define EXT2_CURRENT_REV EXT2_GOOD_OLD_REV<br>
-+#define EXT2_MAX_SUPP_REV EXT2_DYNAMIC_REV<br>
-+<br>
-+#define EXT2_GOOD_OLD_INODE_SIZE 128<br>
-+<br>
-+/*<br>
-+ * Journal inode backup types<br>
-+ */<br>
-+#define EXT3_JNL_BACKUP_BLOCKS 1<br>
-+<br>
-+/*<br>
-+ * Feature set definitions<br>
-+ */<br>
-+<br>
-+#define EXT2_HAS_COMPAT_FEATURE(sb,<u></u>mask) \<br>
-+ ( EXT2_SB(sb)->s_feature_compat & (mask) )<br>
-+#define EXT2_HAS_RO_COMPAT_FEATURE(sb,<u></u>mask) \<br>
-+ ( EXT2_SB(sb)->s_feature_ro_<u></u>compat & (mask) )<br>
-+#define EXT2_HAS_INCOMPAT_FEATURE(sb,<u></u>mask) \<br>
-+ ( EXT2_SB(sb)->s_feature_<u></u>incompat & (mask) )<br>
-+<br>
-+#define EXT2_FEATURE_COMPAT_DIR_<u></u>PREALLOC 0x0001<br>
-+#define EXT2_FEATURE_COMPAT_IMAGIC_<u></u>INODES 0x0002<br>
-+#define EXT3_FEATURE_COMPAT_HAS_<u></u>JOURNAL 0x0004<br>
-+#define EXT2_FEATURE_COMPAT_EXT_ATTR 0x0008<br>
-+#define EXT2_FEATURE_COMPAT_RESIZE_<u></u>INODE 0x0010<br>
-+#define EXT2_FEATURE_COMPAT_DIR_INDEX 0x0020<br>
-+#define EXT2_FEATURE_COMPAT_LAZY_BG 0x0040<br>
-+/* #define EXT2_FEATURE_COMPAT_EXCLUDE_<u></u>INODE 0x0080 not used, legacy */<br>
-+#define EXT2_FEATURE_COMPAT_EXCLUDE_<u></u>BITMAP 0x0100<br>
-+<br>
-+<br>
-+#define EXT2_FEATURE_RO_COMPAT_SPARSE_<u></u>SUPER 0x0001<br>
-+#define EXT2_FEATURE_RO_COMPAT_LARGE_<u></u>FILE 0x0002<br>
-+/* #define EXT2_FEATURE_RO_COMPAT_BTREE_<u></u>DIR 0x0004 not used */<br>
-+#define EXT4_FEATURE_RO_COMPAT_HUGE_<u></u>FILE 0x0008<br>
-+#define EXT4_FEATURE_RO_COMPAT_GDT_<u></u>CSUM 0x0010<br>
-+#define EXT4_FEATURE_RO_COMPAT_DIR_<u></u>NLINK 0x0020<br>
-+#define EXT4_FEATURE_RO_COMPAT_EXTRA_<u></u>ISIZE 0x0040<br>
-+#define EXT4_FEATURE_RO_COMPAT_HAS_<u></u>SNAPSHOT 0x0080<br>
-+#define EXT4_FEATURE_RO_COMPAT_QUOTA 0x0100<br>
-+#define EXT4_FEATURE_RO_COMPAT_<u></u>BIGALLOC 0x0200<br>
-+#define EXT4_FEATURE_RO_COMPAT_<u></u>METADATA_CSUM 0x0400<br>
-+#define EXT4_FEATURE_RO_COMPAT_REPLICA 0x0800<br>
-+<br>
-+#define EXT2_FEATURE_INCOMPAT_<u></u>COMPRESSION 0x0001<br>
-+#define EXT2_FEATURE_INCOMPAT_FILETYPE 0x0002<br>
-+#define EXT3_FEATURE_INCOMPAT_RECOVER 0x0004 /* Needs recovery */<br>
-+#define EXT3_FEATURE_INCOMPAT_JOURNAL_<u></u>DEV 0x0008 /* Journal device */<br>
-+#define EXT2_FEATURE_INCOMPAT_META_BG 0x0010<br>
-+#define EXT3_FEATURE_INCOMPAT_EXTENTS 0x0040<br>
-+#define EXT4_FEATURE_INCOMPAT_64BIT 0x0080<br>
-+#define EXT4_FEATURE_INCOMPAT_MMP 0x0100<br>
-+#define EXT4_FEATURE_INCOMPAT_FLEX_BG 0x0200<br>
-+#define EXT4_FEATURE_INCOMPAT_EA_INODE 0x0400<br>
-+#define EXT4_FEATURE_INCOMPAT_DIRDATA 0x1000<br>
-+<br>
-+#define EXT2_FEATURE_COMPAT_SUPP 0<br>
-+#define EXT2_FEATURE_INCOMPAT_SUPP (EXT2_FEATURE_INCOMPAT_<u></u>FILETYPE| \<br>
-+ EXT4_FEATURE_INCOMPAT_MMP)<br>
-+#define EXT2_FEATURE_RO_COMPAT_SUPP (EXT2_FEATURE_RO_COMPAT_<u></u>SPARSE_SUPER| \<br>
-+ EXT2_FEATURE_RO_COMPAT_LARGE_<u></u>FILE| \<br>
-+ EXT4_FEATURE_RO_COMPAT_DIR_<u></u>NLINK| \<br>
-+ EXT2_FEATURE_RO_COMPAT_BTREE_<u></u>DIR)<br>
-+<br>
-+/*<br>
-+ * Default values for user and/or group using reserved blocks<br>
-+ */<br>
-+#define EXT2_DEF_RESUID 0<br>
-+#define EXT2_DEF_RESGID 0<br>
-+<br>
-+/*<br>
-+ * Default mount options<br>
-+ */<br>
-+#define EXT2_DEFM_DEBUG 0x0001<br>
-+#define EXT2_DEFM_BSDGROUPS 0x0002<br>
-+#define EXT2_DEFM_XATTR_USER 0x0004<br>
-+#define EXT2_DEFM_ACL 0x0008<br>
-+#define EXT2_DEFM_UID16 0x0010<br>
-+#define EXT3_DEFM_JMODE 0x0060<br>
-+#define EXT3_DEFM_JMODE_DATA 0x0020<br>
-+#define EXT3_DEFM_JMODE_ORDERED 0x0040<br>
-+#define EXT3_DEFM_JMODE_WBACK 0x0060<br>
-+#define EXT4_DEFM_NOBARRIER 0x0100<br>
-+#define EXT4_DEFM_BLOCK_VALIDITY 0x0200<br>
-+#define EXT4_DEFM_DISCARD 0x0400<br>
-+#define EXT4_DEFM_NODELALLOC 0x0800<br>
-+<br>
-+/*<br>
-+ * Structure of a directory entry<br>
-+ */<br>
-+#define EXT2_NAME_LEN 255<br>
-+<br>
-+struct ext2_dir_entry {<br>
-+ __u32 inode; /* Inode number */<br>
-+ __u16 rec_len; /* Directory entry length */<br>
-+ __u16 name_len; /* Name length */<br>
-+ char name[EXT2_NAME_LEN]; /* File name */<br>
-+};<br>
-+<br>
-+/*<br>
-+ * The new version of the directory entry. Since EXT2 structures are<br>
-+ * stored in intel byte order, and the name_len field could never be<br>
-+ * bigger than 255 chars, it's safe to reclaim the extra byte for the<br>
-+ * file_type field.<br>
-+ */<br>
-+struct ext2_dir_entry_2 {<br>
-+ __u32 inode; /* Inode number */<br>
-+ __u16 rec_len; /* Directory entry length */<br>
-+ __u8 name_len; /* Name length */<br>
-+ __u8 file_type;<br>
-+ char name[EXT2_NAME_LEN]; /* File name */<br>
-+};<br>
-+<br>
-+/*<br>
-+ * Ext2 directory file types. Only the low 3 bits are used. The<br>
-+ * other bits are reserved for now.<br>
-+ */<br>
-+#define EXT2_FT_UNKNOWN 0<br>
-+#define EXT2_FT_REG_FILE 1<br>
-+#define EXT2_FT_DIR 2<br>
-+#define EXT2_FT_CHRDEV 3<br>
-+#define EXT2_FT_BLKDEV 4<br>
-+#define EXT2_FT_FIFO 5<br>
-+#define EXT2_FT_SOCK 6<br>
-+#define EXT2_FT_SYMLINK 7<br>
-+<br>
-+#define EXT2_FT_MAX 8<br>
-+<br>
-+/*<br>
-+ * EXT2_DIR_PAD defines the directory entries boundaries<br>
-+ *<br>
-+ * NOTE: It must be a multiple of 4<br>
-+ */<br>
-+#define EXT2_DIR_PAD 4<br>
-+#define EXT2_DIR_ROUND (EXT2_DIR_PAD - 1)<br>
-+#define EXT2_DIR_REC_LEN(name_len) (((name_len) + 8 + EXT2_DIR_ROUND) & \<br>
-+ ~EXT2_DIR_ROUND)<br>
-+<br>
-+/*<br>
-+ * This structure is used for multiple mount protection. It is written<br>
-+ * into the block number saved in the s_mmp_block field in the superblock.<br>
-+ * Programs that check MMP should assume that if SEQ_FSCK (or any unknown<br>
-+ * code above SEQ_MAX) is present then it is NOT safe to use the filesystem,<br>
-+ * regardless of how old the timestamp is.<br>
-+ *<br>
-+ * The timestamp in the MMP structure will be updated by e2fsck at some<br>
-+ * arbitary intervals (start of passes, after every few groups of inodes<br>
-+ * in pass1 and pass1b). There is no guarantee that e2fsck is updating<br>
-+ * the MMP block in a timely manner, and the updates it does are purely<br>
-+ * for the convenience of the sysadmin and not for automatic validation.<br>
-+ *<br>
-+ * Note: Only the mmp_seq value is used to determine whether the MMP block<br>
-+ * is being updated. The mmp_time, mmp_nodename, and mmp_bdevname<br>
-+ * fields are only for informational purposes for the administrator,<br>
-+ * due to clock skew between nodes and hostname HA service takeover.<br>
-+ */<br>
-+#define EXT4_MMP_MAGIC 0x004D4D50U /* ASCII for MMP */<br>
-+#define EXT4_MMP_SEQ_CLEAN 0xFF4D4D50U /* mmp_seq value for clean unmount */<br>
-+#define EXT4_MMP_SEQ_FSCK 0xE24D4D50U /* mmp_seq value when being fscked */<br>
-+#define EXT4_MMP_SEQ_MAX 0xE24D4D4FU /* maximum valid mmp_seq value */<br>
-+<br>
-+struct mmp_struct {<br>
-+ __u32 mmp_magic; /* Magic number for MMP */<br>
-+ __u32 mmp_seq; /* Sequence no. updated periodically */<br>
-+ __u64 mmp_time; /* Time last updated */<br>
-+ char mmp_nodename[64]; /* Node which last updated MMP block */<br>
-+ char mmp_bdevname[32]; /* Bdev which last updated MMP block */<br>
-+ __u16 mmp_check_interval; /* Changed mmp_check_interval */<br>
-+ __u16 mmp_pad1;<br>
-+ __u32 mmp_pad2[227];<br>
-+};<br>
-+<br>
-+/*<br>
-+ * Default interval for MMP update in seconds.<br>
-+ */<br>
-+#define EXT4_MMP_UPDATE_INTERVAL 5<br>
-+<br>
-+/*<br>
-+ * Maximum interval for MMP update in seconds.<br>
-+ */<br>
-+#define EXT4_MMP_MAX_UPDATE_INTERVAL 300<br>
-+<br>
-+/*<br>
-+ * Minimum interval for MMP checking in seconds.<br>
-+ */<br>
-+#define EXT4_MMP_MIN_CHECK_INTERVAL 5<br>
-+<br>
-+#endif /* _EXT2FS_EXT2_FS_H */<br>
-Index: syslinux-4.03/libinstaller/<u></u>linuxioctl.h<br>
-=============================<u></u>==============================<u></u>========<br>
---- syslinux-4.03.orig/<u></u>libinstaller/linuxioctl.h<br>
-+++ syslinux-4.03/libinstaller/<u></u>linuxioctl.h<br>
-@@ -9,17 +9,33 @@<br>
-<br>
- #include <sys/ioctl.h><br>
-<br>
-+#ifdef __linux__<br>
-+<br>
- #define statfs _kernel_statfs /* HACK to deal with broken 2.4 distros */<br>
-<br>
- #include <linux/fd.h> /* Floppy geometry */<br>
- #include <linux/hdreg.h> /* Hard disk geometry */<br>
-<br>
--#include <linux/fs.h> /* FIGETBSZ, FIBMAP, FS_IOC_FIEMAP */<br>
-+#include <linux/fs.h> /* FIGETBSZ, FIBMAP, FS_IOC_* */<br>
- #include <linux/msdos_fs.h> /* FAT_IOCTL_SET_ATTRIBUTES */<br>
-<br>
- #undef SECTOR_SIZE /* Defined in msdos_fs.h for no good reason */<br>
- #undef SECTOR_BITS<br>
--#include <linux/ext2_fs.h> /* EXT2_IOC_* */<br>
-+<br>
-+#ifndef FS_IOC_GETFLAGS<br>
-+/* Old kernel headers, these were once ext2-specific... */<br>
-+# include <linux/ext2_fs.h> /* EXT2_IOC_* */<br>
-+<br>
-+# define FS_IOC_GETFLAGS EXT2_IOC_GETFLAGS<br>
-+# define FS_IOC_SETFLAGS EXT2_IOC_SETFLAGS<br>
-+<br>
-+# define FS_IMMUTABLE_FL EXT2_IMMUTABLE_FL<br>
-+<br>
-+#else<br>
-+<br>
-+# include <ext2fs/ext2_fs.h><br>
-+<br>
-+#endif<br>
-<br>
- #ifndef FAT_IOCTL_GET_ATTRIBUTES<br>
- # define FAT_IOCTL_GET_ATTRIBUTES _IOR('r', 0x10, __u32)<br>
-@@ -37,11 +53,13 @@<br>
-<br>
- #undef statfs<br>
-<br>
--#if defined(__linux__) && !defined(BLKGETSIZE64)<br>
-+#ifndef BLKGETSIZE64<br>
- /* This takes a u64, but the size field says size_t. Someone screwed big. */<br>
- # define BLKGETSIZE64 _IOR(0x12,114,size_t)<br>
- #endif<br>
-<br>
- #include <linux/loop.h><br>
-<br>
-+#endif /* __linux__ */<br>
-+<br>
- #endif /* LIBINSTALLER_LINUXIOCTL_H */<br>
-Index: syslinux-4.03/libinstaller/<u></u>syslxcom.c<br>
-=============================<u></u>==============================<u></u>========<br>
---- syslinux-4.03.orig/<u></u>libinstaller/syslxcom.c<br>
-+++ syslinux-4.03/libinstaller/<u></u>syslxcom.c<br>
-@@ -121,9 +121,9 @@ void clear_attributes(int fd)<br>
- {<br>
- int flags;<br>
-<br>
-- if (!ioctl(fd, EXT2_IOC_GETFLAGS, &flags)) {<br>
-- flags &= ~EXT2_IMMUTABLE_FL;<br>
-- ioctl(fd, EXT2_IOC_SETFLAGS, &flags);<br>
-+ if (!ioctl(fd, FS_IOC_GETFLAGS, &flags)) {<br>
-+ flags &= ~FS_IMMUTABLE_FL;<br>
-+ ioctl(fd, FS_IOC_SETFLAGS, &flags);<br>
- }<br>
- break;<br>
- }<br>
-@@ -151,9 +151,9 @@ void set_attributes(int fd)<br>
- {<br>
- int flags;<br>
-<br>
-- if (st.st_uid == 0 && !ioctl(fd, EXT2_IOC_GETFLAGS, &flags)) {<br>
-- flags |= EXT2_IMMUTABLE_FL;<br>
-- ioctl(fd, EXT2_IOC_SETFLAGS, &flags);<br>
-+ if (st.st_uid == 0 && !ioctl(fd, FS_IOC_GETFLAGS, &flags)) {<br>
-+ flags |= FS_IMMUTABLE_FL;<br>
-+ ioctl(fd, FS_IOC_SETFLAGS, &flags);<br>
- }<br>
- break;<br>
- }<br>
diff --git a/meta/recipes-devtools/<u></u>syslinux/files/no-strip.patch b/meta/recipes-devtools/<u></u>syslinux/files/no-strip.patch<br>
deleted file mode 100644<br>
index 775851a..0000000<br>
--- a/meta/recipes-devtools/<u></u>syslinux/files/no-strip.patch<br>
+++ /dev/null<br>
@@ -1,31 +0,0 @@<br>
-Disable stripping of binaries<br>
-<br>
-We don't want to strip these as this is handled separately at package<br>
-time.<br>
-<br>
-Upstream-Status: Inappropriate [configuration]<br>
-<br>
-Signed-off-by: Paul Eggleton <<a href="mailto:paul.eggleton@linux.intel.com" target="_blank">paul.eggleton@linux.intel.com</a><u></u>><br>
-<br>
---- syslinux-4.03.orig/mtools/<u></u>Makefile<br>
-+++ syslinux-4.03/mtools/Makefile<br>
-@@ -4,7 +4,7 @@ include $(topdir)/MCONFIG<br>
- OPTFLAGS = -g -Os<br>
- INCLUDES = -I. -I.. -I../libfat -I../libinstaller<br>
- CFLAGS = $(GCCWARN) -D_FILE_OFFSET_BITS=64 $(OPTFLAGS) $(INCLUDES)<br>
--LDFLAGS = -s<br>
-+LDFLAGS =<br>
-<br>
- SRCS = syslinux.c \<br>
- ../libinstaller/fat.c \<br>
---- syslinux-4.03.orig/utils/<u></u>Makefile<br>
-+++ syslinux-4.03/utils/Makefile<br>
-@@ -18,7 +18,7 @@ topdir = ..<br>
- include $(topdir)/MCONFIG<br>
-<br>
- CFLAGS = $(GCCWARN) -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64<br>
--LDFLAGS = -O2 -s<br>
-+LDFLAGS = -O2<br>
-<br>
- TARGETS = mkdiskimage isohybrid gethostip memdiskfind<br>
- TARGETS += <a href="http://isohybrid.pl" target="_blank">isohybrid.pl</a> # about to be obsoleted<br>
diff --git a/meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.03.bb" target="_blank">syslinux_4.03.bb</a> b/meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.03.bb" target="_blank">syslinux_4.03.bb</a><br>
deleted file mode 100644<br>
index 7c3ecda..0000000<br>
--- a/meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.03.bb" target="_blank">syslinux_4.03.bb</a><br>
+++ /dev/null<br>
@@ -1,65 +0,0 @@<br>
-DESCRIPTION = "A multi-purpose linux bootloader"<br>
-HOMEPAGE = "<a href="http://syslinux.zytor.com/" target="_blank">http://syslinux.zytor.com/</a>"<br>
-LICENSE = "GPLv2+"<br>
-LIC_FILES_CHKSUM = "file://COPYING;md5=<u></u>0636e73ff0215e8d672dc4c32c317b<u></u>b3 \<br>
- file://README;beginline=28;<u></u>endline=34;md5=<u></u>a4607efd4a6392017186d08099e7d5<u></u>46"<br>
-<br>
-# If you really want to run syslinux, you need mtools. We just want the<br>
-# ldlinux.* stuff for now, so skip mtools-native<br>
-DEPENDS = "nasm-native"<br>
-PR = "r9"<br>
-<br>
-SRC_URI = "${KERNELORG_MIRROR}/linux/<u></u>utils/boot/syslinux/4.xx/<u></u>syslinux-${PV}.tar.bz2 \<br>
- file://cross-build.patch \<br>
- file://no-strip.patch \<br>
- file://libinstaller-Avoid-<u></u>using-linux-ext2_fs.h.patch"<br>
-<br>
-SRC_URI[md5sum] = "<u></u>a7ca38a0a5786b6efae8fb01a1ae80<u></u>70"<br>
-SRC_URI[sha256sum] = "<u></u>c65567e324f9d1f7f794ae8f9578a0<u></u>292bbd47d7b8d895a004d2f0152d0b<u></u>da38"<br>
-<br>
-COMPATIBLE_HOST = '(x86_64|i.86).*-(linux|<u></u>freebsd.*)'<br>
-<br>
-EXTRA_OEMAKE = " \<br>
- BINDIR=${bindir} SBINDIR=${sbindir} LIBDIR=${libdir} \<br>
- DATADIR=${datadir} MANDIR=${mandir} INCDIR=${includedir} \<br>
-"<br>
-# syslinux uses $LD for linking, strip `-Wl,' so it can work<br>
-export LDFLAGS = "`echo $LDFLAGS | sed 's/-Wl,//g'`"<br>
-<br>
-do_configure() {<br>
- # drop win32 targets or build fails<br>
- sed -e 's,win32/\S*,,g' -i Makefile<br>
-<br>
- # clean installer executables included in source tarball<br>
- oe_runmake clean<br>
-}<br>
-<br>
-do_compile() {<br>
- # Rebuild only the installer; keep precompiled bootloaders<br>
- # as per author's request (doc/distrib.txt)<br>
- oe_runmake CC="${CC}" installer<br>
-}<br>
-<br>
-do_install() {<br>
- oe_runmake install INSTALLROOT="${D}"<br>
-<br>
- install -d ${D}${libdir}/syslinux/<br>
- install -m 644 ${S}/core/ldlinux.sys ${D}${libdir}/syslinux/<br>
- install -m 644 ${S}/core/ldlinux.bss ${D}${libdir}/syslinux/<br>
-}<br>
-<br>
-PACKAGES += "${PN}-extlinux ${PN}-mbr ${PN}-chain ${PN}-pxelinux ${PN}-isolinux ${PN}-misc"<br>
-<br>
-RDEPENDS_${PN} += "mtools"<br>
-<br>
-FILES_${PN} = "${bindir}/syslinux"<br>
-FILES_${PN}-extlinux = "${sbindir}/extlinux"<br>
-FILES_${PN}-mbr = "${libdir}/${BPN}/mbr.bin"<br>
-FILES_${PN}-chain = "${libdir}/${BPN}/chain.c32"<br>
-FILES_${PN}-isolinux = "${libdir}/${BPN}/isolinux.<u></u>bin"<br>
-FILES_${PN}-pxelinux = "${libdir}/${BPN}/pxelinux.0"<br>
-FILES_${PN}-dev += "${datadir}/${BPN}/com32/lib*$<u></u>{SOLIBS} ${datadir}/${BPN}/com32/<u></u>include ${datadir}/${BPN}/com32/com32.<u></u>ld"<br>
-FILES_${PN}-staticdev += "${datadir}/${BPN}/com32/lib*.<u></u>a ${libdir}/${BPN}/com32/lib*.a"<br>
-FILES_${PN}-misc = "${libdir}/${BPN}/* ${bindir}/*"<br>
-<br>
-BBCLASSEXTEND = "native"<br>
diff --git a/meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.06.bb" target="_blank">syslinux_4.06.bb</a> b/meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.06.bb" target="_blank">syslinux_4.06.bb</a><br>
new file mode 100644<br>
index 0000000..a30a4a3<br>
--- /dev/null<br>
+++ b/meta/recipes-devtools/<u></u>syslinux/<a href="http://syslinux_4.06.bb" target="_blank">syslinux_4.06.bb</a><br>
@@ -0,0 +1,62 @@<br>
+DESCRIPTION = "A multi-purpose linux bootloader"<br>
+HOMEPAGE = "<a href="http://syslinux.zytor.com/" target="_blank">http://syslinux.zytor.com/</a>"<br>
+LICENSE = "GPLv2+"<br>
+LIC_FILES_CHKSUM = "file://COPYING;md5=<u></u>0636e73ff0215e8d672dc4c32c317b<u></u>b3 \<br>
+ file://README;beginline=35;<u></u>endline=41;md5=<u></u>f7249a750bc692d1048b2626752aa4<u></u>15"<br>
+<br>
+# If you really want to run syslinux, you need mtools. We just want the<br>
+# ldlinux.* stuff for now, so skip mtools-native<br>
+DEPENDS = "nasm-native util-linux"<br>
+PR = "r0"<br>
+<br>
+SRC_URI = "${KERNELORG_MIRROR}/linux/<u></u>utils/boot/syslinux/4.xx/<u></u>syslinux-${PV}.tar.bz2"<br>
+<br>
+SRC_URI[md5sum] = "<u></u>0384ef35b724615074e77b1fc89d5b<u></u>47"<br>
+SRC_URI[sha256sum] = "<u></u>dbb7774e36c4596de68fa5e6788ad5<u></u>7809ab31a1760e5d7626e697766d30<u></u>ad26"<br>
+<br>
+COMPATIBLE_HOST = '(x86_64|i.86).*-(linux|<u></u>freebsd.*)'<br>
+<br>
+EXTRA_OEMAKE = " \<br>
+ BINDIR=${bindir} SBINDIR=${sbindir} LIBDIR=${libdir} \<br>
+ DATADIR=${datadir} MANDIR=${mandir} INCDIR=${includedir} \<br>
+"<br>
+# syslinux uses $LD for linking, strip `-Wl,' so it can work<br>
+export LDFLAGS = "`echo $LDFLAGS | sed 's/-Wl,//g'`"<br>
+<br>
+do_configure() {<br>
+ # drop win32 targets or build fails<br>
+ sed -e 's,win32/\S*,,g' -i Makefile<br>
+<br>
+ # clean installer executables included in source tarball<br>
+ oe_runmake clean<br>
+}<br>
+<br>
+do_compile() {<br>
+ # Rebuild only the installer; keep precompiled bootloaders<br>
+ # as per author's request (doc/distrib.txt)<br>
+ oe_runmake CC="${CC} -isystem ${STAGING_INCDIR}" installer<br>
+}<br>
+<br>
+do_install() {<br>
+ oe_runmake install INSTALLROOT="${D}"<br>
+<br>
+ install -d ${D}${libdir}/syslinux/<br>
+ install -m 644 ${S}/core/ldlinux.sys ${D}${libdir}/syslinux/<br>
+ install -m 644 ${S}/core/ldlinux.bss ${D}${libdir}/syslinux/<br>
+}<br>
+<br>
+PACKAGES += "${PN}-extlinux ${PN}-mbr ${PN}-chain ${PN}-pxelinux ${PN}-isolinux ${PN}-misc"<br>
+<br>
+RDEPENDS_${PN} += "mtools"<br>
+<br>
+FILES_${PN} = "${bindir}/syslinux"<br>
+FILES_${PN}-extlinux = "${sbindir}/extlinux"<br>
+FILES_${PN}-mbr = "${datadir}/${BPN}/mbr.bin"<br>
+FILES_${PN}-chain = "${datadir}/${BPN}/chain.c32"<br>
+FILES_${PN}-isolinux = "${datadir}/${BPN}/isolinux.<u></u>bin"<br>
+FILES_${PN}-pxelinux = "${datadir}/${BPN}/pxelinux.0"<br>
+FILES_${PN}-dev += "${datadir}/${BPN}/com32/lib*$<u></u>{SOLIBS} ${datadir}/${BPN}/com32/<u></u>include ${datadir}/${BPN}/com32/com32.<u></u>ld"<br>
+FILES_${PN}-staticdev += "${datadir}/${BPN}/com32/lib*.<u></u>a ${libdir}/${BPN}/com32/lib*.a"<br>
+FILES_${PN}-misc = "${datadir}/${BPN}/* ${libdir}/${BPN}/* ${bindir}/*"<br>
+<br>
+BBCLASSEXTEND = "native"<br>
<br>
</blockquote>
</div></div></blockquote></div><br></div>