[oe] PATCH: Use uImage make target for linux-omap1

[Khem Raj]

Agreed. I would be happy if anyone else who is using some omap board
try out this patch and check if this works for them or not.

Thanks

-Khem

On 8/4/07, Philip Balister <philip at balister.org> wrote:
> I'm running an OSK build atm (with current code). Tomorrow, I want to
> compare how the kernel creates the uImage with the commands in the bbfile.
>
> I tend to agree we should use the kernel build system wherever possible.
>
> I'm concerned that we are having trouble booting various combinations of
> uboot/kernel/file system and would like to have some understanding of
> what is causing the problems. I do not want to fix one persons build at
> the expense of other's.
>
> Of course, the "thesis" is priority number atm, so I will be doind this
> during procrastination time.
> http://www.phdcomics.com/comics/archive.php?comicid=315
>
>
> Philip
>
> Khem Raj wrote:
> > Hello,
> >
> > Current uImage generated for omap1 target did not boot on my target.
> > We are using manual method to create uImage.
> > This patch uses uImage KERNEL_IMAGETYPE for omap1 targets. I have
> > tested this on omap5912osk and the resulting uImage booted just fine.
> >
> > If it is OK please consider this patch for applying.
> >
> > Thanks
> >
> > -Khem
> >
> >
> > ------------------------------------------------------------------------
>
> >
> > _______________________________________________
> > Openembedded-devel mailing list
> > Openembedded-devel at lists.openembedded.org
> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
>
>