[oe] No graphic when loading "x11-gpe-image"
Ulf Samuelsson
ulf.samuelsson at atmel.com
Fri Aug 14 15:25:13 UTC 2009
Koen Kooi skrev:
> On 14-08-09 09:48, Ulf Samuelsson wrote:
>> I have tried opie-image which boots properly and I get a screen
>>
>> x11-gpe-image does not start properly.
>> Only a black screen.
>
> My crystal ball is broken, without some log files or output we can't
> help you
>
>
There is really no output
gpe_dm is started and then nothing happens.
I can use mplayer to play a video, but
I do not get the X-Environment.
opie-image uses the same kernel settings and this boots OK
with the right environment.
Anyone got a working ARM926EJ-S jffs2 image I can test on?
> *** AT91Bootstrap-2.13-rc1
> AT45DB642D detected
> Valid image found
> From: [0x00008400] To: [0x23F00000] Size: [0x00040000]
> ........SUCCESS
> Start: [0x23F00000]
U-Boot 2009.08-rc2 (Aug 13 2009 - 08:57:38)
DRAM: 64 MB
NAND: 256 MiB
DataFlash:AT45DB642
Nb pages: 8192
Page Size: 1056
Size= 8650752 bytes
Logical address: 0xC0000000
Area 0: C0000000 to C00041FF (RO) Bootstrap
Area 1: C0004200 to C00083FF Environment
Area 2: C0008400 to C0041FFF (RO) U-Boot
Area 3: C0084000 to C0293FFF Kernel
Area 4: C0294000 to C083FFFF FS
Net: macb0
macb0: Starting autonegotiation...
macb0: Autonegotiation complete
macb0: link up, 100Mbps full-duplex (lpa: 0xc5e1)
Hit any key to stop autoboot: 0
Saving Environment to dataflash...
## Booting kernel from Legacy Image at 21000000 ...
Image Name: Angstrom/2.6.30.2/at91sam9263dfc
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2072200 Bytes = 2 MB
Load Address: 20008000
Entry Point: 20008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing
Linux......................................................................................................................................
done, booting the kernel.
[ 0.000000] Linux version 2.6.30.2 (ulf at grond) (gcc version 4.3.3
(GCC) ) #1 PREEMPT Fri Aug 14 00:23:38 CEST 2009
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ),
cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Atmel AT91SAM9263-EK
[ 0.000000] Ignoring unrecognised tag 0x54410008
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Clocks: CPU 199 MHz, master 99 MHz, main 16.367 MHz
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 16256
[ 0.000000] Kernel command line: root=/dev/mtdblock1 rootfstype=jffs2
ip=10.175.196.18:10.175.196.247:10.175.196.1:255.255.255.0
console=ttyS0,115200,mem=64M
[ 0.000000] NR_IRQS:192
[ 0.000000] AT91: 160 gpio irqs in 5 banks
[ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes)
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [ttyS0] enabled
[ 0.080000] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
[ 0.090000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.100000] Memory: 64MB = 64MB total
[ 0.110000] Memory: 60372KB available (3744K code, 492K data, 136K
init, 0K highmem)
[ 0.120000] Calibrating delay loop... 99.53 BogoMIPS (lpj=497664)
[ 0.310000] Security Framework initialized
[ 0.310000] Mount-cache hash table entries: 512
[ 0.320000] CPU: Testing write buffer coherency: ok
[ 0.340000] net_namespace: 764 bytes
[ 0.350000] NET: Registered protocol family 16
[ 0.380000] AT91: Power Management
[ 0.390000] AT91: Starting after user reset
[ 0.450000] bio: create slab <bio-0> at 0
[ 0.460000] SCSI subsystem initialized
[ 0.470000] usbcore: registered new interface driver usbfs
[ 0.470000] usbcore: registered new interface driver hub
[ 0.480000] usbcore: registered new device driver usb
[ 0.510000] NET: Registered protocol family 2
[ 0.510000] IP route cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.520000] TCP established hash table entries: 2048 (order: 2, 16384
bytes)
[ 0.530000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.530000] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.540000] TCP reno registered
[ 0.550000] NET: Registered protocol family 1
[ 0.560000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat,
Inc.
[ 0.570000] msgmni has been set to 118
[ 0.590000] alg: No test for stdrng (krng)
[ 0.590000] io scheduler noop registered
[ 0.600000] io scheduler cfq registered (default)
[ 0.610000] atmel_lcdfb atmel_lcdfb.0: 150KiB frame buffer at
239c0000 (mapped at ffc00000)
[ 0.700000] Console: switching to colour frame buffer device 30x40
[ 0.710000] atmel_lcdfb atmel_lcdfb.0: fb0: Atmel LCDC at 0x00700000
(mapped at c48d6000), irq 26
[ 0.900000] atmel_usart.0: ttyS0 at MMIO 0xfeffee00 (irq = 1) is a
ATMEL_SERIAL
[ 0.900000] atmel_usart.1: ttyS1 at MMIO 0xfff8c000 (irq = 7) is a
ATMEL_SERIAL
[ 0.940000] loop: module loaded
[ 0.950000] Driver 'sd' needs updating - please use bus_type methods
[ 0.960000] MACB_mii_bus: probed
[ 0.970000] eth0: Atmel MACB at 0xfffbc000 irq 21 (04:25:fe:ed:00:18)
[ 0.970000] eth0: attached PHY driver [Davicom DM9161A]
(mii_bus:phy_addr=ffffffff:00, irq=-1)
[ 1.000000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda
(Samsung NAND 256MiB 3,3V 8-bit)
[ 1.010000] AT91 NAND: 8-bit, Software ECC
[ 1.020000] Scanning device for bad blocks
[ 1.100000] Creating 3 MTD partitions on "atmel_nand":
[ 1.110000] 0x000000000000-0x000000400000 : "Bootstrap"
[ 1.120000] 0x000000400000-0x000008000000 : "Root File System"
[ 1.130000] 0x000008000000-0x000010000000 : "Data"
[ 1.140000] atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffa4000
(irq 14)
[ 1.150000] mtd_dataflash spi0.0: AT45DB642x (8448 KBytes) pagesize
1056 bytes (OTP)
[ 1.170000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.180000] at91_ohci at91_ohci: AT91 OHCI
[ 1.190000] at91_ohci at91_ohci: new USB bus registered, assigned bus
number 1
[ 1.190000] at91_ohci at91_ohci: irq 29, io mem 0x00a00000
[ 1.260000] usb usb1: configuration #1 chosen from 1 choice
[ 1.270000] hub 1-0:1.0: USB hub found
[ 1.270000] hub 1-0:1.0: 2 ports detected
[ 1.280000] Initializing USB Mass Storage driver...
[ 1.290000] usbcore: registered new interface driver usb-storage
[ 1.290000] USB Mass Storage support registered.
[ 1.300000] mice: PS/2 mouse device common for all mice
[ 1.310000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.320000] ads7846 spi0.3: touchscreen, irq 31
[ 1.320000] input: ADS784x Touchscreen as
/devices/platform/atmel_spi.0/spi0.3/input/input1
[ 1.340000] rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as
rtc0
[ 1.350000] IRQ 1/rtc0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1.350000] i2c /dev entries driver
[ 1.360000] at24 0-0050: 65536 byte 24c512 EEPROM (writable)
[ 1.370000] i2c-gpio i2c-gpio: using pins 68 (SDA) and 69 (SCL)
[ 1.380000] AT91SAM9 Watchdog: sorry, watchdog is disabled
[ 1.380000] at91_wdt: probe of at91_wdt failed with error -5
[ 1.390000] cpuidle: using governor ladder
[ 1.390000] cpuidle: using governor menu
[ 1.400000] Registered led device: ds1
[ 1.410000] Registered led device: ds2
[ 1.410000] Registered led device: ds3
[ 1.450000] usbcore: registered new interface driver usbhid
[ 1.450000] usbhid: v2.6:USB HID core driver
[ 1.460000] Advanced Linux Sound Architecture Driver Version 1.0.20.
[ 1.470000] AC97C regs = FFFA0000
[ 1.470000] AC97C irq = 18
[ 1.480000] at91-ac97: codec write timeout
<4>at91-ac97: codec write timeout
<4>at91-ac97: codec write timeout
<4>at91-ac97: codec write timeout
<6>ALSA device list:
[ 1.530000] #0: Atmel AC97 Controller at 0xfffa0000, irq 18
[ 1.540000] TCP cubic registered
[ 1.540000] NET: Registered protocol family 17
[ 1.540000] RPC: Registered udp transport module.
[ 1.550000] RPC: Registered tcp transport module.
[ 1.560000] rtc-at91sam9 at91_rtt.0: setting system clock to
2009-08-14 00:40:40 UTC (1250210440)
[ 1.650000] usb 1-1: new full speed USB device using at91_ohci and
address 2
[ 1.830000] usb 1-1: configuration #1 chosen from 1 choice
[ 1.840000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3.090000] IP-Config: Complete:
[ 3.090000] device=eth0, addr=10.175.196.18, mask=255.255.255.0,
gw=10.175.196.1,
[ 3.100000] host=10.175.196.18, domain=, nis-domain=(none),
[ 3.100000] bootserver=10.175.196.247,
rootserver=10.175.196.247, rootpath=
[ 13.450000] eth0: link up (100/Full)
[ 13.450000] VFS: Mounted root (jffs2 filesystem) on device 31:1.
[ 13.460000] Freeing init memory: 136K
[ 13.470000] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0
1.00 PQ: 0 ANSI: 2
[ 13.570000] sd 0:0:0:0: [sda] 31309760 512-byte hardware sectors:
(16.0 GB/14.9 GiB)
[ 13.580000] sd 0:0:0:0: [sda] Write Protect is off
[ 13.580000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.620000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 13.630000] sda: sda1
[ 13.650000] sd 0:0:0:0: [sda] Attached SCSI removable disk
INIT: version 2.86 booting
Please wait: booting...
Starting udev[ 20.340000] udev: starting version 141
Remounting root file system...
[ 28.600000] udc: at91_udc version 3 May 2006
[ 28.700000] g_serial gadget: Gadget Serial v2.4
[ 28.730000] g_serial gadget: g_serial ready
[ 29.140000] Bluetooth: Core ver 2.15
[ 29.170000] NET: Registered protocol family 31
[ 29.170000] Bluetooth: HCI device and connection manager initialized
[ 29.180000] Bluetooth: HCI socket layer initialized
[ 29.570000] Bluetooth: L2CAP ver 2.13
[ 29.570000] Bluetooth: L2CAP socket layer initialized
[ 29.710000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 31.020000] NET: Registered protocol family 10
[ 31.340000] Bluetooth: RFCOMM socket layer initialized
[ 31.340000] Bluetooth: RFCOMM TTY layer initialized
[ 31.350000] Bluetooth: RFCOMM ver 1.11
ALSA: Restoring mixer settings...
Configuring network interfaces... [ 34.450000] eth0: link down
[ 35.250000] ADDRCONF(NETDEV_UP): eth0: link is not ready
eth0 no wireless extensions.
udhcpc (v1.13.2) started
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
Sending discover...
[ 37.450000] eth0: link up (100/Full)
[ 37.450000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sending discover...
Sending select for 10.175.196.237...
Lease of 10.175.196.237 obtained, lease time 86400
run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1
adding dns 10.175.196.1
done.
Starting portmap daemon: portmap.
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
INIT: Entering runlevel: 5
Starting system message bus: dbus.
Starting Hardware abstraction layer hald
Starting Connection Manager
Starting Dropbear SSH server: dropbear.
Starting music player daemon: mpdlog: problem opening log file
"/var/lib/mpd/mpd.log" (config line 33) for writing
Aborted
.
Starting Samba: smbd nmbd.
Starting syslogd/klogd: done
* starting FTP Server: vsftpd... done.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[ ok ]
Running ntpdate to synchronize clock.
Starting GPE display manager: gpe-dm
.-------.
| | .-.
| | |-----.-----.-----.| | .----..-----.-----.
| | | __ | ---'| '--.| .-'| | |
| | | | | |--- || --'| | | ' | | | |
'---'---'--'--'--. |-----''----''--' '-----'-'-'-'
-' |
'---'
The Angstrom Distribution at91sam9263dfc ttyS0
Angstrom 2009.X-test-20090813 at91sam9263dfc ttyS0
at91sam9263dfc login: root
root at at91sam9263dfc:~#
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
--
Best Regards
Ulf Samuelsson
More information about the Openembedded-devel
mailing list