[oe] [RFC] patch for bluetooth audio.conf

[Koen Kooi]

On 15-07-09 19:24, Klaus 'mrmoku' Kurzmann wrote:
> Am Mittwoch 15 Juli 2009 16:16:13 schrieb Phil Blundell:
>> On Wed, 2009-07-15 at 16:07 +0200, Klaus 'mrmoku' Kurzmann wrote:
>>> to get audio routing for bluetooth headsets correct on OpenMoko phones we
>>> need the attached patch to bluez.inc which changes audio.conf to enables
>>> the SCORouting=PCM option.
>>>
>>> Is this something that can be done globally? Or will it break on other
>>> hardware?
>>
>> It will break on (some) other hardware.  SCORouting is a binary setting:
>> you can send audio over the HCI, or through a dedicated port (PCM) but
>> not both.  This change would lose on machines where the PCM interface
>> isn't connected to anything: in particular that probably means any
>> machine where the bluetooth hardware is on a usb dongle or CF card.
>>
>>> If it cannot be done globally, what is the correct way to do that?
>>> We (SHR distro) could do that with a distro override, but if it has the
>>> possibility to break other hardware we would not want that ;) We would
>>> rather add a machine override then. Right now bluez4 is *not* machine
>>> dependent and the config files are included in the base package. I see
>>> two ways to do that:
>>>
>>> a) make bluez4 machine dependent and add overrides for om-gta01/2
>>> b) extract the config files into some bluez4-config package and provide a
>>> different one for om-gta01/2
>>
>> Option (a) sounds fairly unattractive.  My first preference would be to
>> figure this out at runtime (eg by extending blueprobe to do it) rather
>> than in a static file; if that's impossible or impractical then your
>> option (b) is probably fine.
> As I'm told that making bluez autodetect that is difficult...

Blueprobe can already do autodetection and more, so I don't see what the 
problem is.