[oe] Execution of Build Output Failing (Testing)

[Khem Raj]

On Fri, Aug 27, 2010 at 12:37 PM,  <openembedded at rkmorris.us> wrote:
> Hi,
> Thanks for the quick response!
> What's strange is that watching the boot in QEMU it seems to be looking for 2.6.17-rc3 inside the /lib/modules directory ... but if I mount my initrd (un-gzip, then mount as ext2), and look inside this directory - the directory is 2.6.34 instead! Somewhere / somehow there seems to be a versioning issue perhaps?
> Thoughts?

yes because the default kernel for qemuarm machine is 2.6.34 and hence
the modules which are part of rfs are for that kernel.
you should use same kernel to boot qemu for best results.

> Thanks again,... Russell
>
>
> On Fri, Aug 27, 2010 12:41  PM, Khem Raj <raj.khem at gmail.com> wrote:
>> On Fri, Aug 27, 2010 at 6:46 AM,  <openembedded at rkmorris.us> wrote:
>> > Hi,
>> > As I reported recently, I am having issues getting my OE output up and running on my h1940 device. It seems to be some sort of issue between the kernel and initrd files, so to debug this I figured that I'd build and test on QEMU (hoping that the recent udev related issues were my problem, and to make sure that I could build "properly").
>> > Given this, I went ahead and built console-image (angstrom 2008.1 distro) for qemuarm, to see if it was perhaps just me having issues (which is still possible). However, I took the output from the qemuarm build and tried to run it ... and still have issues (not the same as my h1940, but still fatal).
>> > On QEMU (verified to work with the QEMU provide example ARM images) I am able to boot, at least part way, but end up with a FATAL message about a missing directory ... /lib/modules/2.6.17-rc3.
>> > Is this a known issue? Any proposed fixes or workarounds for this?
>>
>> oe.dev works well on qemuarm here with
>>
>> PREFERRED_VERSION_usbutils_local                = "0.86"
>> PREFERRED_VERSION_udev_local                    = "151"
>>
>> in local.conf and minimal/angstrom distro last time I tried it booted
>> fine. you can also adapt
>> contrib/qemu/run-qemu.sh to run OE in qemu.
>>
>> > Thanks!
>> > ... Russell
>> > _______________________________________________
>> > Openembedded-devel mailing list
>> > Openembedded-devel at lists.openembedded.org
>> > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>> >
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>