[oe] [PATCH] sysvinit_2.86.bb: add possibility to use USB Serial Console with only rx/tx.
Scott Anderson
o2e at saaworld.com
Sun Dec 5 13:17:04 UTC 2010
Hi,
I apologize for coming into this late, but could you give a quick explanation of why a
new variable is needed? In other words, what is wrong with something like:
SERIAL_CONSOLE="-L /dev/ttyUSB0 115200"
SAA
On Dec 2, 2010, at 5:38 AM, Matteo Facchinetti wrote:
> USB_SERIAL_CONSOLE is similar to SERIAL_CONSOLE but SERIAL_CONSOLE variabile isn't described too.
>
> IMHO could be need to add a new paragraph describing all kind of CONSOLE available for machine conf file.
>
> Where's the right place to add these variabiles in usermanual?
>
>
>
> On 11/26/2010 06:23 PM, Koen Kooi wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Where's the patch that adds this new var to the usermanual?
>>
>> On 26-11-10 17:54, matteo.facchinetti at sirius-es.it wrote:
>>
>>> From: Matteo Facchinetti<engineering at sirius-es.it>
>>>
>>> There are many evaluationboard that use mini-usb port like as
>>> a serial port + power supply. Using it as serial console have
>>> to force getty with no need for carrier detect.
>>>
>>> Signed-off-by: Matteo Facchinetti<engineering at sirius-es.it>
>>> ---
>>> recipes/sysvinit/sysvinit_2.86.bb | 5 +++++
>>> 1 files changed, 5 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/recipes/sysvinit/sysvinit_2.86.bb b/recipes/sysvinit/sysvinit_2.86.bb
>>> index 6ab5290..c34cbc9 100644
>>> --- a/recipes/sysvinit/sysvinit_2.86.bb
>>> +++ b/recipes/sysvinit/sysvinit_2.86.bb
>>> @@ -65,6 +65,11 @@ do_install () {
>>> install -m 0644 ${WORKDIR}/inittab ${D}${sysconfdir}/inittab
>>> if [ ! -z "${SERIAL_CONSOLE}" ]; then
>>> echo "S:2345:respawn:${base_sbindir}/getty ${SERIAL_CONSOLE}">> ${D}${sysconfdir}/inittab
>>> + else
>>> +
>>> + if [ ! -z "${USB_SERIAL_CONSOLE}" ]; then
>>> + echo "S:2345:respawn:${base_sbindir}/getty -L ${USB_SERIAL_CONSOLE}">> ${D}${sysconfdir}/inittab
>>> + fi
>>> fi
>>> if [ "${USE_VT}" = "1" ]; then
>>> cat<<EOF>>${D}${sysconfdir}/inittab
>>>
>> -----BEGIN PGP SIGNATURE-----
>> Version: GnuPG v1.4.5 (Darwin)
>>
>> iD8DBQFM7+0kMkyGM64RGpERAtPZAKCSHvZA9Eko51AqkoVR476+5tWoIQCgr1/Z
>> kxtr+B+5lfr+vqIxh6o5qGA=
>> =JSd7
>> -----END PGP SIGNATURE-----
>>
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel at lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>
>>
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
More information about the Openembedded-devel
mailing list