[oe] Facing problem to build totem
Tejas
tejas at picus.in
Thu Feb 25 08:42:19 UTC 2010
Hello All,
I am facing problem to build totem movie player for beagle
board. When I run bitbake totem , it downloads all necessary packages and
complete all tasks except configuring of totem. The log is as followed.
NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to
increase performance.
NOTE: Handling BitBake files: \ (6701/6701) [100 %]
NOTE: Parsing finished. 6414 cached, 0 parsed, 287 skipped, 0 masked.
NOTE: Cache is clean, not saving.
NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing runqueue
NOTE: Running task 1614 of 2327 (ID: 5,
/home/neelam/tejas_work/oe/openembedded/recipes/totem/totem_2.24.2.bb,
do_configure)
ERROR: function do_configure failed
ERROR: see log in
/home/neelam/tejas_work/oe/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/t
otem-2.24.2-r0/temp/log.do_configure.15367
NOTE: Task failed:
/home/neelam/tejas_work/oe/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/t
otem-2.24.2-r0/temp/log.do_configure.15367
ERROR: TaskFailed event exception, aborting
ERROR: Build of
/home/neelam/tejas_work/oe/openembedded/recipes/totem/totem_2.24.2.bb
do_configure failed
ERROR: Task 5
(/home/neelam/tejas_work/oe/openembedded/recipes/totem/totem_2.24.2.bb,
do_configure) failed
NOTE: Tasks Summary: Attempted 2315 tasks of which 2315 didn't need to be
rerun and 1 failed.
ERROR:
'/home/neelam/tejas_work/oe/openembedded/recipes/totem/totem_2.24.2.bb'
failed
The log file of log.do_configure.15367 is as followed.
/home/neelam/tejas_work/oe/angstrom-dev/work/armv7a-angstrom-linux-gnueabi/t
otem-2.24.2-r0/temp/log.do_configure.15367
automake (GNU automake) 1.10.2
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Tom Tromey <tromey at redhat.com>
and Alexandre Duret-Lutz <adl at gnu.org>.
AUTOV is 1.10
NOTE: Executing glib-gettextize --force --copy
Copying file mkinstalldirs
Copying file po/Makefile.in.in
Please add the files
codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4
from the
/home/neelam/tejas_work/oe/angstrom-dev/staging/i686-linux/usr/share/aclocal
directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
NOTE: Executing intltoolize --copy --force --automake
NOTE: Executing autoreconf --verbose --install --force --exclude=autopoint
-I/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnue
abi/usr/share/aclocal-1.10 -I /hom
e/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueabi/us
r/share/aclocal
Use of uninitialized value in formline at
/home/neelam/tejas_work/oe/angstrom-dev/staging/i686-linux/usr/bin/automake
line 7641.
Use of uninitialized value in formline at
/home/neelam/tejas_work/oe/angstrom-dev/staging/i686-linux/usr/bin/automake
line 7641.
autoreconf: Entering directory `.'
autoreconf: configure.in: not using Gettext
autoreconf: running: aclocal -I
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal-1.10 -I
/home/neelam/tejas_work/oe/angstrom-dev/staging/a
rmv7a-angstrom-linux-gnueabi/usr/share/aclocal --force
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal/libpcap.m4:923: warning: underquoted definition of
AC_LBL_LINUX_TPACKET_AUXDATA_TP_VLAN_T CI
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal/libpcap.m4:923: run info '(automake)Extending aclocal'
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal/libpcap.m4:923: or see
http://sources.redhat.com/automake/automake.html#Extending-acloc al
autoreconf: configure.in: tracing
autoreconf: running: libtoolize --copy --force
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros
in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal/libpcap.m4:923: warning: underquoted definition of
AC_LBL_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal/libpcap.m4:923: run info '(automake)Extending aclocal'
/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-linux-gnueab
i/usr/share/aclocal/libpcap.m4:923: or see
http://sources.redhat.com/automake/automake.html#Extending-acloc al
autoreconf: running:
/home/neelam/tejas_work/oe/angstrom-dev/staging/i686-linux/usr/bin/autoconf
--include=/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-li
nux-gnueabi/ usr/share/aclocal-1.10
--include=/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-li
nux-gnueabi/usr/share/aclocal --force --warnings=cross
autoreconf: running:
/home/neelam/tejas_work/oe/angstrom-dev/staging/i686-linux/usr/bin/autoheade
r
--include=/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-li
nux-gnueab i/usr/share/aclocal-1.10
--include=/home/neelam/tejas_work/oe/angstrom-dev/staging/armv7a-angstrom-li
nux-gnueabi/usr/share/aclocal --force --warnings=cross
autoreconf: running: automake --foreign --add-missing --copy --force-missing
--warnings=cross
automake: unknown warning category `cross'
configure.in:27: installing `./config.guess'
configure.in:27: installing `./config.sub'
gnome-doc-utils.make:63: HAVE_GNOME_DOC_UTILS does not appear in
AM_CONDITIONAL
help/Makefile.am:1: `gnome-doc-utils.make' included from here
gnome-doc-utils.make:133: ENABLE_SK does not appear in AM_CONDITIONAL
help/Makefile.am:1: `gnome-doc-utils.make' included from here
gnome-doc-utils.make:182: ENABLE_SK does not appear in AM_CONDITIONAL
help/Makefile.am:1: `gnome-doc-utils.make' included from here
autoreconf: automake failed with exit status: 1
FATAL: autoreconf execution failed.
Before building totem, I have already built base-image for
beagle board and it was successful. If anywhere I am wrong, please guide me
and correct me.
-Tejas.
More information about the Openembedded-devel
mailing list