[oe] [PATCH 1/1] sourceipk: add class to create source ipks
Koen Kooi
k.kooi at student.utwente.nl
Tue Jul 6 15:04:25 UTC 2010
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Looks good to me. I'll apply it if there are no objections.
On 01-07-10 22:30, Chase Maupin wrote:
> * Created the sourceipk.bbclass class that can be used to
> package the patched sources and recipe for an application
> into an ipk for installation.
> * Allows specification of the installation directory for the
> sources using the SRCIPK_INSTALL_DIR variable.
> * Can be enabled per package and controlled through the
> CREATE_SRCIPK variable.
> * Creates a README file in the sources directory that
> explains the contents of the package.
> * User can specify the package architecture for the source ipk
> using the SRCIPK_PACKAGE_ARCH variable. The default value is
> "all".
> * Using the -L flag to the cp command to copy files pointed to by
> symlinks and not the symlinks themselves.
>
> Signed-off-by: Chase Maupin <chase.maupin at ti.com>
> ---
> classes/sourceipk.bbclass | 127 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 127 insertions(+), 0 deletions(-)
> create mode 100644 classes/sourceipk.bbclass
>
> diff --git a/classes/sourceipk.bbclass b/classes/sourceipk.bbclass
> new file mode 100644
> index 0000000..e3f2c41
> --- /dev/null
> +++ b/classes/sourceipk.bbclass
> @@ -0,0 +1,127 @@
> +# sourceipk.bbclass enables the creation of an ipk file that contains the
> +# sources used during the build. The sources contained in the ipk are the
> +# patched sources before configuration has been done.
> +#
> +# This class is used to provide an easy method to ship the corresponding
> +# sources for a package to end users so that they can install them on their
> +# host or target systems.
> +#
> +# This package uses the following variables to control its operations:
> +# - CREATE_SRCIPK = When set to 1 this variable indicates that
> +# a source ipk should be generated for the package.
> +# - SRCIPK_INSTALL_DIR = This variable indicates the directory to install
> +# the sources into.
> +# - SRCIPK_PACKAGE_ARCH = This variable allows specific recipies to
> +# specify an architecture for the sourcetree
> +# package is "all" is not appropriate
> +#
> +# The default installation directory for the sources is:
> +# /usr/src/${PN}-src
> +#
> +# By setting the SRCIPK_INSTALL_DIR this default can be changed to any
> +# location desired. When combined with the opkg -o option this allows for the
> +# system building to specify a relative package install location to the
> +# install root given to opkg. Each source ipk can have a different directory.
> +#
> +# Creation of the source ipk can be controlled per package by setting
> +# CREATE_SRCIPK = "1" in the package recipe or by setting
> +# CREATE_SRCIPK_pn-<package name> = "1" in your local.conf
> +#
> +#TODO:
> +# Need to figure out how to use ipkg-build in this class.
> +# I tried adding it as a dependency for the do_create_srcipk
> +# task using:
> +# do_create_srcipk[depends] += "ipkg-utils-native:do_populate_sysroot"
> +# But then there is a circular dependency between sourcipk.bbclass and
> +# ipkg-utils-native. Until I can figure out how to resolve this
> +# circular dependency I am extracting the needed pieces from ipkg-build
> +# into this class and building the source ipk myself.
> +
> +
> +# Default is to not create the source ipk
> +CREATE_SRCIPK ?= "0"
> +
> +# Default installation prefix
> +SRCIPK_INSTALL_DIR ?= "/usr/src/${PN}-src"
> +
> +# Default PACKAGE_ARCH for sources is "all"
> +SRCIPK_PACKAGE_ARCH ?= "all"
> +
> +# Create a README file that describes the contents of the source ipk
> +sourceipk_create_readme() {
> + readme="$1/README.${PN}-src"
> + touch $readme
> + echo 'This package contains the patched sources for ${PN} that' >> $readme
> + echo 'were used to generate the ${PN} binary ipk package(s).' >> $readme
> + echo 'This package does not build or generate the binaries' >> $readme
> + echo 'directly. To build the binaries you must either' >> $readme
> + echo 'configure and build the sources yourself or use:' >> $readme
> + echo ' bitbake ${PN}' >> $readme
> + echo '' >> $readme
> + echo 'NOTE: The patches applied to the sources can be found in' >> $readme
> + echo " the \"patches\" directory" >> $readme
> +}
> +
> +# Create the source ipk file. The ipk is manually created here instead
> +# of using the normal ipk system because some recipes will over write
> +# the PACKAGES variable. Thus if this class added a -src package
> +# to the list of packages to be created that package would be lost.
> +# See the linux kernel recipe for an example of this issue.
> +sourceipk_do_create_srcipk() {
> + if [ ${CREATE_SRCIPK} != "0" ]
> + then
> + tmp_dir="${WORKDIR}/sourceipk-tmp"
> + srcipk_dir="${WORKDIR}/sourceipk-data"
> + mkdir -p $tmp_dir/CONTROL
> + mkdir -p $srcipk_dir
> + control_file="$tmp_dir/CONTROL/control"
> +
> + # Write the control file
> + echo "Package: ${PN}-src" > $control_file
> + echo "Version: ${PV}-${PR}" >> $control_file
> + echo "Description: Patched sources for ${PN}" >> $control_file
> + echo "Section: ${SECTION}" >> $control_file
> + echo "Priority: Optional" >> $control_file
> + echo "Maintainer: ${MAINTAINER}" >> $control_file
> + echo "Architecture: ${SRCIPK_PACKAGE_ARCH}" >> $control_file
> + srcuri="${SRC_URI}"
> + if [ "$srcuri" == "" ]
> + then
> + srcuri="OpenEmbedded"
> + fi
> + echo "Source: $srcuri" >> $control_file
> +
> + #Write the control tarball
> + tar -C $tmp_dir/CONTROL --owner=0 --group=0 -czf $srcipk_dir/control.tar.gz .
> +
> + # Get rid of temporary control file
> + rm -rf $tmp_dir/CONTROL
> +
> + # Copy sources for packaging
> + mkdir -p $tmp_dir/${SRCIPK_INSTALL_DIR}
> + cp -rLf ${S}/* $tmp_dir/${SRCIPK_INSTALL_DIR}/
> + sourceipk_create_readme $tmp_dir/${SRCIPK_INSTALL_DIR}/
> + cp ${FILE} $tmp_dir/${SRCIPK_INSTALL_DIR}/
> +
> + #Write the data tarball
> + tar -C $tmp_dir --owner=0 --group=0 -czf $srcipk_dir/data.tar.gz .
> +
> + # Create the debian-binary file
> + echo "2.0" > $srcipk_dir/debian-binary
> +
> + #Write the ipk file
> + mkdir -p ${DEPLOY_DIR_IPK}/${SRCIPK_PACKAGE_ARCH}
> + pkg_file=${DEPLOY_DIR_IPK}/${SRCIPK_PACKAGE_ARCH}/${PN}-src_${PV}-${PR}_${SRCIPK_PACKAGE_ARCH}.ipk
> + rm -f $pkg_file
> + tar -C $srcipk_dir -czf $pkg_file .
> +
> + # Remove the temporary directory
> + rm -rf $tmp_dir
> + fi
> +}
> +
> +EXPORT_FUNCTIONS do_create_srcipk
> +
> +do_create_srcipk[deptask] = "do_patch"
> +
> +addtask create_srcipk after do_patch before do_configure
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFMM0X5MkyGM64RGpERAlLOAJ9zir2YCyl6hlF8+gAJReg+uWwZkwCdHOFp
m88nsflzdmgtkbIEWkLdtOM=
=VUiZ
-----END PGP SIGNATURE-----
More information about the Openembedded-devel
mailing list