[oe] [PATCH 1/3 v2] xilinx-virtex4: new file

[Frans Meulenbroeks]

2010/7/14 Adrian Alonso <aalonso00 at gmail.com>

> * New config machine, generic support for Xilinx
>  Virtex4 platforms ml401, ml403, ml405, ml410
> * Tested on ml405 target board, powerpc based ref
>  design at http://github.com/aalonso/xilinx-ml405
> * Target configuration handled in xilinx-bsp.bbclass
>
> Signed-off-by: Adrian Alonso <aalonso00 at gmail.com>
> ---
>  conf/machine/xilinx-virtex4.conf |   37
> +++++++++++++++++++++++++++++++++++++
>  1 files changed, 37 insertions(+), 0 deletions(-)
>  create mode 100644 conf/machine/xilinx-virtex4.conf
>
> diff --git a/conf/machine/xilinx-virtex4.conf
> b/conf/machine/xilinx-virtex4.conf
> new file mode 100644
> index 0000000..eeea44e
> --- /dev/null
> +++ b/conf/machine/xilinx-virtex4.conf
> @@ -0,0 +1,37 @@
> +# Copyright (C) 2010, Adrian Alonso <aalonso00 at gmail.com>
> +# Released under the MIT license (see packages/COPYING)
> +#@TYPE: Machine
> +#@Name: Xilinx Virtex4 FPGA Development Platform
> +#@DESCRIPTION: Machine configuration for Xilinx Virtex4 family
> +# Supported targets
> +# ML403, ML405, ML410
> +
> +TARGET_ARCH = "powerpc"
> +TARGET_CPU  = "405"
> +TARGET_FPU  = "soft"
> +#tune for the selected cpu
> +require conf/machine/include/tune-ppc405.inc
> +
> +PREFERRED_PROVIDER_virtual/kernel = "linux-xilinx"
> +PREFERRED_VERSION_u-boot_xilinx-virtex4 = "u-boot-xilinx"
> +
> +KERNEL_IMAGETYPE = "uImage"
> +
> +MACHINE_FEATURES = "kernel26 apm ext2 vfat ethernet"
> +MACHINE_EXTRA_RECOMMENDS = "kernel-modules"
> +
> +UBOOT_ENTRYPOINT ?= "0x00000000"
> +UBOOT_LOADADDRESS ?= "0x00000000"
> +
> +# Xilinx EDK override hardware definitions for xilinx-bsp
> +# Include in your local.conf
> +# XILINX_BSP_PATH = "complete path for Xilinx XPS project"
> +# XILINX_BOARD = "ml410"
> +
> +# Don't use tty1
> +USE_VT = "0"
> +SERIAL_CONSOLE = "9600 ttyS0"
> +
> +# Device nodes add xsa for (system ace)
> +IMAGE_DEVICE_TABLES = "files/device_table-minimal.txt \
> +                       files/device_table_add-xsa.txt"
>

I think these are normally not put in machine files.
(at least I normally put them in my image recipe's not in the machine file).

--
> 1.7.1.1
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>