[oe] [PATCH 01/10] xilinx-bsp: handle more xilinx targets
Adrian Alonso
aalonso00 at gmail.com
Fri Jul 30 15:42:26 UTC 2010
* Rewrite for handling most xilinx platforms
* Add helper functions for configuring the target board
* User must add in local.conf:
TARGET_ARCH = "powerpc" | "microblaze"
XILINX_BOARD = "ml401" | "ml403" | "ml410" | "ml507" | "ml510"
whit this varibales u-boot and the linux kernel gets configured
for a selected board.
Signed-off-by: Adrian Alonso <aalonso00 at gmail.com>
---
classes/xilinx-bsp.bbclass | 109 +++++++++++++++++++++++++++++++++++---------
1 files changed, 87 insertions(+), 22 deletions(-)
diff --git a/classes/xilinx-bsp.bbclass b/classes/xilinx-bsp.bbclass
index d32c60e..35f7108 100644
--- a/classes/xilinx-bsp.bbclass
+++ b/classes/xilinx-bsp.bbclass
@@ -14,6 +14,47 @@
#Xilinx ML403
#Xilinx ML507
#More to come soon ;)
+#oenote "ML403 board setup"
+# Treat this as legacy substitution find when xparatemer was deprecated in favor of dts
+#cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
+#${S}/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
+
+def map_target(a, d):
+ import re
+ board = bb.data.getVar('XILINX_BOARD', d, 1)
+
+ if re.match('powerpc', a):
+ cpu = bb.data.getVar('TARGET_CPU', d, 1)
+ return 'ppc' + cpu + '-' + board
+ else:
+ return 'system'
+
+
+def uboot_machine(a, d):
+ import re
+
+ board = bb.data.getVar('XILINX_BOARD', d, 1)
+
+ if board in ['ml300', 'ml401', 'ml405', 'ml507']:
+ return board + '_config'
+ elif re.match('powerpc', a):
+ return 'xilinx-ppc' + bb.data.getVar('TARGET_CPU', d, 1) + '-generic_config'
+ else:
+ return 'microblaze-generic_config'
+
+def uboot_target(a, d):
+ import re
+
+ board = bb.data.getVar('XILINX_BOARD', d, 1)
+ target = bb.data.getVar('TARGET_CPU', d, 1) + '-generic'
+
+ if board in ['ml300', 'ml401', 'ml405', 'ml507']:
+ return board
+ elif re.match('powerpc', a):
+ return 'ppc' + target
+ else:
+ return target
+
do_configure_prepend() {
@@ -21,27 +62,47 @@ do_configure_prepend() {
#now depending on the board type and arch do what is nessesary
if [ -n "${XILINX_BSP_PATH}" ]; then
- case "${XILINX_BOARD}" in
- ml403 | ML403)
- oenote "ML403 board setup"
- cp -pPR ${XILINX_BSP_PATH}/ppc405_0/libsrc/linux_2_6_v1_00_a/linux/arch/ppc/platforms/4xx/xparameters/xparameters_ml40x.h \
- ${S}/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
- ;;
- ml507 | ML507)
- oenote "Xilinx ML507 board setup"
+ if [ -n "${XILINX_BOARD}" ]; then
+ if [ -d "${S}/arch/${TARGET_ARCH}/boot" ]; then
dts=`find "${XILINX_BSP_PATH}" -name *.dts -print`
- if [ -n "$dts" ]; then
- oenote "Replacing device tree with ${dts}"
- cp -pP ${dts} ${S}/arch/powerpc/boot/dts/virtex440-ml507.dts
+ if [ -e "$dts" ]; then
+ oenote "Replacing device tree to match hardware model"
+ if [ "${TARGET_ARCH}" == "powerpc" ]; then
+ cp -pP ${dts} ${S}/arch/powerpc/boot/dts/virtex${TARGET_BOARD}.dts
+ else
+ cp -pP ${dts} ${S}/arch/microblaze/platform/generic/${TARGET_BOARD}.dts
+ fi
else
- oenote "Device tree not found in project dir"
+ oefatal "No device tree found, missing hardware ref design?"
+ exit 1
fi
- ;;
- *)
- oefatal "! Unknow Xilinx board ! Exit ..."
- exit 1
- ;;
- esac
+ elif [ -d "${S}/board/xilinx" ]; then
+ oenote "Replacing xparameters header to match hardware model"
+ #xparam=`find "${XILINX_BSP_PATH}" -name xparameters.h -print`
+ if [ "${TARGET_ARCH}" == "powerpc" ]; then
+ xparam="${XILINX_BSP_PATH}/ppc${TARGET_CPU}_0/include/xparameters.h"
+ cpu="PPC`echo ${TARGET_CPU} | tr '[:lower:]' '[:upper:]'`"
+ else
+ xparam="${XILINX_BSP_PATH}/${TARGET_CPU}_0/include/xparameters.h"
+ cpu=`echo ${TARGET_CPU} | tr '[:lower:]' '[:upper:]'`
+ fi
+ if [ -e "$xparam" ]; then
+ cp ${xparam} ${S}/board/xilinx/${UBOOT_TARGET}
+ echo "/*** Cannonical definitions ***/
+#define XPAR_PLB_CLOCK_FREQ_HZ XPAR_PROC_BUS_0_FREQ_HZ
+#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_${cpu}_CORE_CLOCK_FREQ_HZ
+#ifndef XPAR_DDR2_SDRAM_MEM_BASEADDR
+# define XPAR_DDR2_SDRAM_MEM_BASEADDR XPAR_DDR_SDRAM_MPMC_BASEADDR
+#endif
+#define XPAR_PCI_0_CLOCK_FREQ_HZ 0" >> ${S}/board/xilinx/${UBOOT_TARGET}/xparameters.h
+ else
+ oefatal "No xparameters header file found, missing hardware ref design?"
+ fi
+ fi
+ else
+ oefatal "XILINX_BOARD not defined ! Exit"
+ exit 1
+ fi
else
oefatal "XILINX_BSP_PATH not defined ! Exit"
exit 1
@@ -49,7 +110,11 @@ fi
}
-
-
-
-
+do_deploy_prepend() {
+# Install u-boot elf image
+if [ -d "${XILINX_BSP_PATH}" ]; then
+ if [ -e "${S}/u-boot" ]; then
+ install ${S}/u-boot ${XILINX_BSP_PATH}
+ fi
+fi
+}
--
1.7.2
More information about the Openembedded-devel
mailing list