[oe] 'swapper' process using 100% cpu when system idle

[Khem Raj]

On Mon, Jun 28, 2010 at 3:35 PM, Chris Tapp <dokuwiki at keylevel.com> wrote:
> I'm using a console-image for angstrom-2008.1 / x86.
>
> It all builds well and runs. However, both on my target hardware (Geode
> LX800) and under Qemu the 'swapper' process is running at 100% cpu when the
> system is doing nothing e.g. after booting).
>
> 'top' shows that the cpu is never idle.
>
> Is this 'as expected', or should I be adding something to the build to
> enable the cpu to idle?
>

try using different kernel version

> Chris
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>