[oe] pointercal ignored?

[Ulf Samuelsson]

Ulf Samuelsson skrev:
> Marcin Juszkiewicz skrev:
>> Dnia wtorek, 9 marca 2010 o 23:25:22 Ulf Samuelsson napisał(a):
>>> I have built a custom variant of x11-gpe-image for the SAM9M10.
>>
>> Which machine in OE covers that board? I have to admit that I did not
>> tried to hack mine.
> 
> I am building the SAM9G45EK, but I am using a 2.6.30 kernel
> patched with maxim.org.za + www.linux4sam.org .exp3 patches
> instead of the 2.6.32 currently in openembedded.
> 
> Also updated bootstrap and u-boot, but that won't affect this.
> 
>>  
>>> When gpe is started, the Y direction seems to be compressed.
>>> When I start the calculator and press at the top of the screen,
>>> the calculator buttons 5 mm below gets pressed.
>>> When I press at the bottom of the screen, the buttons 5 mm above
>>> gets pressed.
>>>
>>> Changing /etc/pointercal manually seems to have no effect
>>>
>>> It's like pointercal gets ignored.
>>>
>>> When others run the same kernel with minor config changes
>>> using the stable branch ans xserver-kdrive, this phenomena
>>> does not happen.
>>
>> Check do you have kdrive or xorg with evdev or tslib driver.
>>
> 
> I will check, when I am back home.


xserver-xorg-2_1.7.4-r0
tslib-1.0-r23.3
xtscal-0.6.3-r7
xf86-input-evdev-1_2.3.2-r10
calibrateproto-2_0.0+r0+gitr1da6fd1e2c7a49648245c98481fabea8b9690a8c-r0
libxcalibrate-2_0.0+r0+gitr209d83af61ed38a002c8096377deac292b3e396c-r0

There is no PREFERRED_PROVIDER_xserver defined.


> Will also send the patches I added.
> 
>> Regards, 
> BR
> /Ulf
> 
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel


-- 
Best Regards
Ulf Samuelsson