[oe] R: Re: S98configure role
l.bolognini at tiscali.it
l.bolognini at tiscali.it
Thu Oct 14 14:45:22 UTC 2010
Thank you Chris et al. for your reply.
Even if I told you in my last
mail I had no chanche to investigate further, I took some time to burn
some SD and tried to understand the topic.
Well, in my build machine, 4
packages remain unpacked:
openssh-sshd
net-snmp-server
udev
update-
modules
But, since openssh-sshd and update-modules are intentionally
left unpacked (if test "x$D" != "x"; then exit 1 - in the .postinst
script), it seems that for udev and net-snmp-server something goes
wrong.
Looking in depth, I saw that in udev_141.bb, inside
pkg_postinst_udev_append(), the usual test
if test "x$D" != "x"; then
OPT="-r $D"
else
OPT="-s"
fi
isn't written before
update-rc.d command:
update-rc.d $OPT udev-cache start 12 S .
Simply,
this piece of code is not available.
Result: update.rc.d fails in the
build machine because OPT is empty.
Then we have not S03udev and
S12udev-cache init links and S98configure can repair the situation but
only from 2nd boot on.
To solve the problem I had to add that usual
test inside pkg_postinst_udev_append() in udev_141.bb, then bitbake
udev again.
Similar thing happens for net-snmp-server, where the
postinst script has the same piece of code written twice, resulting in
an error and then in the flag unpacked for the package.
Commenting out
the first occurrance I got good results.
Here net-snmp configuration
by means of S98configure is less dramatical because net-snmp agent
starts after S98configure and then everything is fine also in 1st boot.
I hope this investigation could help someone involved in the same
problems,
bye,
Luca
----Messaggio originale----
Da: clarson at kergoth.
com
Data: 14/10/2010 16.01
A: <openembedded-devel at lists.openembedded.
org>
Ogg: Re: [oe] S98configure role
On Thu, Oct 14, 2010 at 2:32 AM,
l.bolognini at tiscali.it <
l.bolognini at tiscali.it> wrote:
> I'm
wondering what is the role of this script, placed in /etc/rcS.d.
>
>
What I guess is that, for some reasons, some packages get installed but
> not configured (then unpacked) since their postinstall script returns
> non zero value.
>
Yes, this is correct. Some postinsts do things
which can be done at image
creation time on the build machine, but not
all. Those which must *run* the
binaries in the filesystem, for
example, cannot be run at build time, so
must be run at first boot time
on the target.
--
Christopher Larson
clarson at kergoth dot com
Founder - BitBake, OpenEmbedded, OpenZaurus
Maintainer - Tslib
Senior
Software Engineer, Mentor Graphics
_______________________________________________
Openembedded-devel
mailing list
Openembedded-devel at lists.openembedded.org
http://lists.
linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Supera i limiti: raddoppia la velocità da 10 a 20 Mega! Risparmia con Tutto Incluso: telefono + adsl 20 mega a soli 26,60 € al mese per un anno! SCONTO DI 160 EURO! http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso/?WT.mc_id=01fw
More information about the Openembedded-devel
mailing list