[oe] minimal-image doesn't boot

[Marco Cavallini]

Florian Boor ha scritto, Il 02/09/2010 18:20:
> Hi Marco,
> 
> Marco Cavallini schrieb:
>> I have been trying to run a minimal-image on an ARM system, because I
>> plan to use it on a 16MB NOR Flash.
>>
>> I started wirh a PXA270 based board but I faced to puzzling jffs2
>> errors, then I tried on a more reliable machine (for me) Ronetix-pm9263
>> with same results.
>>
>> Does anybody tested minimal-image recently?
>> Did it work?
>> With which machine?
>>
>> Any hint will be greatly appreciated.
> 
> this looks like either the jffs2 image are completely messed up (not very
> likely) or something went wrong while flashing. Do the bootloader agree with the
> kernels about the partition layout and was the root flash partition erased
> completely?
> 
> I do not have a Ronetix board around which would be useful to verify but I could
> try it with the SimOne I have - I built a minimal image for it recently but
> didn't test it so far.

Dear Florian,
a complete root flash partition clean solved the problem
Thank you

/marco