[oe] [PATCH 5/6] linux-2.6.36: remove ts72xx support because 2.6.38 is now default
Koen Kooi
koen at dominion.thruhere.net
Sat Apr 2 16:08:48 UTC 2011
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Is it really necessary to remove it from .36 instead of DP+1;ing .38?
On 02-04-11 16:18, Petr Štetiar wrote:
> Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ---
> .../linux-2.6.36/ts72xx/0001-ts72xx_base.patch | 450 --
> .../ts72xx/0002-ts72xx_force_machine-id.patch | 49 -
> .../linux-2.6.36/ts72xx/0003-ep93xx_cpuinfo.patch | 36 -
> .../linux-2.6.36/ts72xx/0004-ep93xx_eth.patch | 555 ---
> .../ts72xx/0005-ep93xx-m2m-DMA-support.patch | 886 ----
> .../linux-2.6.36/ts72xx/0006-ts72xx_rs485.patch | 223 -
> .../linux-2.6.36/ts72xx/0007-ts72xx_ts_ser1.patch | 264 --
> .../ts72xx/0008-ts72xx_ts_eth100.patch | 278 --
> .../linux-2.6.36/ts72xx/0009-ts72xx_pata.patch | 437 --
> .../linux-2.6.36/ts72xx/0010-ts72xx_gpio_i2c.patch | 63 -
> .../ts72xx/0011-ts72xx_dio_keypad.patch | 311 --
> .../linux-2.6.36/ts72xx/0012-ts72xx_sbcinfo.patch | 267 --
> .../linux-2.6.36/ts72xx/0013-ts72xx_max197.patch | 356 --
> .../ts72xx/0014-ts7200_nor_flash.patch | 181 -
> .../linux-2.6.36/ts72xx/0015-ts72xx_sdcard.patch | 3298 --------------
> .../ts72xx/0016-ts72xx_spi_tmp124.patch | 305 --
> .../0017-ts72xx-use-CPLD-watchdog-for-reset.patch | 53 -
> .../ts72xx/0018-ethoc-ts7300-fixes.patch | 93 -
> .../ts72xx/0019-ts7300-add-ethernet-support.patch | 87 -
> .../ts72xx/0023-ts72xx-add-lcd-linux-driver.patch | 4569 --------------------
> .../ts72xx/0024-ts72xx-add-GPIO-keys.patch | 100 -
> recipes/linux/linux-2.6.36/ts72xx/defconfig | 2127 ---------
> recipes/linux/linux_2.6.36.bb | 25 -
> 23 files changed, 0 insertions(+), 15013 deletions(-)
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0001-ts72xx_base.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0002-ts72xx_force_machine-id.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0003-ep93xx_cpuinfo.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0004-ep93xx_eth.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0005-ep93xx-m2m-DMA-support.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0006-ts72xx_rs485.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0007-ts72xx_ts_ser1.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0008-ts72xx_ts_eth100.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0009-ts72xx_pata.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0010-ts72xx_gpio_i2c.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0011-ts72xx_dio_keypad.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0012-ts72xx_sbcinfo.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0013-ts72xx_max197.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0014-ts7200_nor_flash.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0015-ts72xx_sdcard.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0016-ts72xx_spi_tmp124.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0017-ts72xx-use-CPLD-watchdog-for-reset.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0018-ethoc-ts7300-fixes.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0019-ts7300-add-ethernet-support.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0023-ts72xx-add-lcd-linux-driver.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/0024-ts72xx-add-GPIO-keys.patch
> delete mode 100644 recipes/linux/linux-2.6.36/ts72xx/defconfig
>
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0001-ts72xx_base.patch b/recipes/linux/linux-2.6.36/ts72xx/0001-ts72xx_base.patch
> deleted file mode 100644
> index 3e04afc..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0001-ts72xx_base.patch
> +++ /dev/null
> @@ -1,450 +0,0 @@
> -From f05911e053a51d9a5aa0c8632b442354a7486f45 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Thu, 10 Jun 2010 10:43:24 +0200
> -Subject: [PATCH 01/24] ts72xx_base
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -- patch: allow to force nF bit in control reg
> -- register pwm1
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/Kconfig | 3 +
> - arch/arm/mach-ep93xx/Kconfig | 9 ++
> - arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 7 +
> - arch/arm/mach-ep93xx/include/mach/memory.h | 28 +++++
> - arch/arm/mach-ep93xx/include/mach/ts72xx.h | 145 +++++++++++++++++++++--
> - arch/arm/mach-ep93xx/ts72xx.c | 41 ++++++-
> - arch/arm/mm/proc-arm920.S | 5 +-
> - scripts/Makefile.fwinst | 2 +-
> - 8 files changed, 223 insertions(+), 17 deletions(-)
> -
> -diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> -index 9c26ba7..8e6c85d 100644
> ---- a/arch/arm/Kconfig
> -+++ b/arch/arm/Kconfig
> -@@ -327,6 +327,9 @@ config ARCH_EP93XX
> - select CPU_ARM920T
> - select ARM_AMBA
> - select ARM_VIC
> -+ select ARCH_SPARSEMEM_ENABLE
> -+ select GENERIC_GPIO
> -+ select HAVE_CLK
> - select COMMON_CLKDEV
> - select ARCH_REQUIRE_GPIOLIB
> - select ARCH_HAS_HOLES_MEMORYMODEL
> -diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> -index 3a08b18..b6be37e 100644
> ---- a/arch/arm/mach-ep93xx/Kconfig
> -+++ b/arch/arm/mach-ep93xx/Kconfig
> -@@ -7,6 +7,15 @@ config CRUNCH
> - help
> - Enable kernel support for MaverickCrunch.
> -
> -+config CR1_NFBIT
> -+ bool "Turn on nF bit in ControlRegister 1"
> -+ help
> -+ Say 'Y' here to force the nF bit on. Usually this is set
> -+ by the bootrom. If it is not set, then the CPU core will
> -+ run from HCLK instead of FCLK, and performance will suffer.
> -+ If you see BogoMIPS of about 1/4 of your CPU clock, try
> -+ turning this on; your performance should double.
> -+
> - comment "EP93xx Platforms"
> -
> - choice
> -diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
> -index c54b3e5..db351cc 100644
> ---- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
> -+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
> -@@ -83,6 +83,7 @@
> -
> - #define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000)
> -
> -+#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000)
> - #define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000)
> -
> - #define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000)
> -@@ -97,12 +98,17 @@
> - #define EP93XX_I2S_BASE EP93XX_APB_IOMEM(0x00020000)
> -
> - #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000)
> -+#define EP93XX_SECURITY_REG(x) (EP93XX_SECURITY_BASE + (x))
> -+#define EP93XX_SECURITY_UNIQID EP93XX_SECURITY_REG(0x2440)
> -
> - #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
> - #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
> - #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
> -+#define EP93XX_GPIO_F_INT_DEBOUNCE EP93XX_GPIO_REG(0x64)
> - #define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
> -+#define EP93XX_GPIO_A_INT_DEBOUNCE EP93XX_GPIO_REG(0xa8)
> - #define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
> -+#define EP93XX_GPIO_B_INT_DEBOUNCE EP93XX_GPIO_REG(0xc4)
> - #define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
> -
> - #define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
> -@@ -220,6 +226,7 @@
> - #define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
> - #define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
> - #define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
> -+#define EP93XX_SYSCON_CHIPID EP93XX_SYSCON_REG(0x94)
> - #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
> -
> - #define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
> -diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
> -index 554064e..78eaacf 100644
> ---- a/arch/arm/mach-ep93xx/include/mach/memory.h
> -+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
> -@@ -19,4 +19,32 @@
> - #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
> - #endif
> -
> -+/*
> -+ * Non-linear mapping like so:
> -+ * phys => virt
> -+ * 0x00000000 => 0xc0000000
> -+ * 0x01000000 => 0xc1000000
> -+ * 0x04000000 => 0xc4000000
> -+ * 0x05000000 => 0xc5000000
> -+ * 0xe0000000 => 0xc8000000
> -+ * 0xe1000000 => 0xc9000000
> -+ * 0xe4000000 => 0xcc000000
> -+ * 0xe5000000 => 0xcd000000
> -+ *
> -+ * As suggested here: http://marc.info/?l=linux-arm&m=122754446724900&w=2
> -+ *
> -+ * Note that static inline functions won't work here because
> -+ * arch/arm/include/asm/memory.h uses "#ifndef __virt_to_phys" to check whether to
> -+ * use generic functions or not.
> -+ */
> -+
> -+#define __phys_to_virt(p) \
> -+ (((p) & 0x07ffffff) | (((p) & 0xe0000000) ? 0x08000000 : 0) | PAGE_OFFSET)
> -+
> -+#define __virt_to_phys(v) \
> -+ (((v) & 0x07ffffff) | (((v) & 0x08000000) ? 0xe0000000 : 0 ))
> -+
> -+#define SECTION_SIZE_BITS 24
> -+#define MAX_PHYSMEM_BITS 32
> -+
> - #endif
> -diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
> -index 0eabec6..1d50dec 100644
> ---- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
> -+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
> -@@ -8,36 +8,41 @@
> - * virt phys size
> - * febff000 22000000 4K model number register
> - * febfe000 22400000 4K options register
> -- * febfd000 22800000 4K options register #2
> -+ * febfd000 22800000 4K options register #2 (JP6 and TS-9420 flags)
> -+ * febfc000 [67]0000000 4K NAND data register
> -+ * febfb000 [67]0400000 4K NAND control register
> -+ * febfa000 [67]0800000 4K NAND busy register
> - * febf9000 10800000 4K TS-5620 RTC index register
> - * febf8000 11700000 4K TS-5620 RTC data register
> -+ * febf7000 23400000 4K PLD version (3 bits)
> -+ * febf6000 22c00000 4K RS-485 control register
> -+ * febf5000 23000000 4K RS-485 mode register
> - */
> -
> - #define TS72XX_MODEL_PHYS_BASE 0x22000000
> - #define TS72XX_MODEL_VIRT_BASE 0xfebff000
> - #define TS72XX_MODEL_SIZE 0x00001000
> -
> --#define TS72XX_MODEL_TS7200 0x00
> --#define TS72XX_MODEL_TS7250 0x01
> --#define TS72XX_MODEL_TS7260 0x02
> -+#define TS7XXX_MODEL_TS7200 0x00
> -+#define TS7XXX_MODEL_TS7250 0x01
> -+#define TS7XXX_MODEL_TS7260 0x02
> -+#define TS7XXX_MODEL_TS7300 0x03
> -+#define TS7XXX_MODEL_TS7400 0x04
> -+#define TS7XXX_MODEL_MASK 0x07
> -
> -
> - #define TS72XX_OPTIONS_PHYS_BASE 0x22400000
> - #define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000
> - #define TS72XX_OPTIONS_SIZE 0x00001000
> --
> - #define TS72XX_OPTIONS_COM2_RS485 0x02
> - #define TS72XX_OPTIONS_MAX197 0x01
> -
> --
> - #define TS72XX_OPTIONS2_PHYS_BASE 0x22800000
> - #define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000
> - #define TS72XX_OPTIONS2_SIZE 0x00001000
> --
> - #define TS72XX_OPTIONS2_TS9420 0x04
> - #define TS72XX_OPTIONS2_TS9420_BOOT 0x02
> -
> --
> - #define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000
> - #define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000
> - #define TS72XX_RTC_INDEX_SIZE 0x00001000
> -@@ -49,32 +54,146 @@
> - #define TS72XX_WDT_CONTROL_PHYS_BASE 0x23800000
> - #define TS72XX_WDT_FEED_PHYS_BASE 0x23c00000
> -
> -+#define TS72XX_PLD_VERSION_VIRT_BASE 0xfebf7000
> -+#define TS72XX_PLD_VERSION_PHYS_BASE 0x23400000
> -+#define TS72XX_PLD_VERSION_SIZE 0x00001000
> -+
> -+#define TS72XX_JUMPERS_MAX197_PHYS_BASE 0x10800000 // jumpers/max197 busy bit/COM1 dcd register (8-bit, read only)
> -+#define TS72XX_MAX197_SAMPLE_PHYS_BASE 0x10f00000 // max197 sample/control register (16-bit read/8-bit write)
> -+
> -+/*
> -+ * RS485 option
> -+ */
> -+#define TS72XX_RS485_CONTROL_VIRT_BASE 0xfebf6000
> -+#define TS72XX_RS485_CONTROL_PHYS_BASE 0x22c00000
> -+#define TS72XX_RS485_CONTROL_SIZE 0x00001000
> -+
> -+#define TS72XX_RS485_MODE_VIRT_BASE 0xfebf5000
> -+#define TS72XX_RS485_MODE_PHYS_BASE 0x23000000
> -+#define TS72XX_RS485_MODE_SIZE 0x00001000
> -+
> -+#define TS72XX_RS485_AUTO485FD 1
> -+#define TS72XX_RS485_AUTO485HD 2
> -+#define TS72XX_RS485_MODE_RS232 0x00
> -+#define TS72XX_RS485_MODE_FD 0x01
> -+#define TS72XX_RS485_MODE_9600_HD 0x04
> -+#define TS72XX_RS485_MODE_19200_HD 0x05
> -+#define TS72XX_RS485_MODE_57600_HD 0x06
> -+#define TS72XX_RS485_MODE_115200_HD 0x07
> -+
> -+/*
> -+ * PC/104 8-bit & 16-bit bus
> -+ *
> -+ * virt phys size
> -+ * febf0000 11e00000 4K PC/104 8-bit I/O
> -+ * febef000 21e00000 4K PC/104 16-bit I/O
> -+ * fea00000 11a00000 1MB PC/104 8-bit memory
> -+ * fe900000 21a00000 1MB PC/104 16-bit memory
> -+ */
> -+#define TS72XX_PC104_8BIT_IO_VIRT_BASE 0xfebf0000
> -+#define TS72XX_PC104_8BIT_IO_PHYS_BASE 0x11e00000
> -+#define TS72XX_PC104_8BIT_IO_SIZE 0x00001000
> -+#define TS72XX_PC104_8BIT_MEM_VIRT_BASE 0xfea00000
> -+#define TS72XX_PC104_8BIT_MEM_PHYS_BASE 0x11a00000
> -+#define TS72XX_PC104_8BIT_MEM_SIZE 0x00100000
> -+
> -+#define TS72XX_PC104_16BIT_IO_VIRT_BASE 0xfebef000
> -+#define TS72XX_PC104_16BIT_IO_PHYS_BASE 0x21e00000
> -+#define TS72XX_PC104_16BIT_IO_SIZE 0x00001000
> -+#define TS72XX_PC104_16BIT_MEM_VIRT_BASE 0xfe900000
> -+#define TS72XX_PC104_16BIT_MEM_PHYS_BASE 0x21a00000
> -+#define TS72XX_PC104_16BIT_MEM_SIZE 0x00100000
> -+
> -+/*
> -+ * TS7200 specific : CompactFlash memory map
> -+ *
> -+ * phys size description
> -+ * 11000000 7 CF registers (8-bit each), starting at 11000001
> -+ * 10400006 2 CF aux registers (8-bit)
> -+ * 21000000 2 CF data register (16-bit)
> -+ */
> -+#define TS7200_CF_CMD_PHYS_BASE 0x11000000
> -+#define TS7200_CF_AUX_PHYS_BASE 0x10400006
> -+#define TS7200_CF_DATA_PHYS_BASE 0x21000000
> -+
> -+/*
> -+ * TS7260 specific : SD card & Power Management
> -+ *
> -+ * phys size description
> -+ * 12000000 4K Power management register (8-bit)
> -+ * 13000000 4K SD card registers (4 x 8-bit)
> -+ */
> -+#define TS7260_POWER_MANAGEMENT_PHYS_BASE 0x12000000
> -+#define TS7260_PM_RS232_LEVEL_CONVERTER 0x01
> -+#define TS7260_PM_USB 0x02
> -+#define TS7260_PM_LCD 0x04
> -+#define TS7260_PM_5V_SWITCHER 0x08
> -+#define TS7260_PM_PC104_CLOCK 0x10
> -+#define TS7260_PM_PC104_FAST_STROBES 0x20
> -+#define TS7260_PM_TTL_UART_ENABLE 0x40
> -+#define TS7260_PM_SCRATCH_BIT 0x80
> -+
> -+#define TS7260_SDCARD_PHYS_BASE 0x13000000
> -+
> - #ifndef __ASSEMBLY__
> -
> - static inline int board_is_ts7200(void)
> - {
> -- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
> -+ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
> -+ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7200;
> - }
> -
> - static inline int board_is_ts7250(void)
> - {
> -- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
> -+ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
> -+ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7250;
> - }
> -
> - static inline int board_is_ts7260(void)
> - {
> -- return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
> -+ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
> -+ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7260;
> -+}
> -+
> -+static inline int board_is_ts7300(void)
> -+{
> -+ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
> -+ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7300;
> -+}
> -+
> -+static inline int board_is_ts7400(void)
> -+{
> -+ return (__raw_readb(TS72XX_MODEL_VIRT_BASE) &
> -+ TS7XXX_MODEL_MASK) == TS7XXX_MODEL_TS7400;
> - }
> -
> - static inline int is_max197_installed(void)
> - {
> - return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
> -- TS72XX_OPTIONS_MAX197);
> -+ TS72XX_OPTIONS_MAX197);
> - }
> -
> - static inline int is_ts9420_installed(void)
> - {
> - return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
> -- TS72XX_OPTIONS2_TS9420);
> -+ TS72XX_OPTIONS2_TS9420);
> - }
> -+
> -+static inline int is_rs485_installed(void)
> -+{
> -+ return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
> -+ TS72XX_OPTIONS_COM2_RS485);
> -+}
> -+
> -+static inline int get_ts72xx_pld_version(void)
> -+{
> -+ return (__raw_readb(TS72XX_PLD_VERSION_VIRT_BASE) & 0x7);
> -+}
> -+
> -+/* User jumper */
> -+static inline int is_jp6_set(void)
> -+{
> -+ return (__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) & 0x1);
> -+}
> -+
> - #endif
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index 93aeab8..345ce18 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -54,7 +54,36 @@ static struct map_desc ts72xx_io_desc[] __initdata = {
> - .pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE),
> - .length = TS72XX_RTC_DATA_SIZE,
> - .type = MT_DEVICE,
> -- }
> -+ },
> -+ /* Use this for debug only. Each device will map its own PC/104 address space */
> -+ ///* PC/104 (8-bit) I/O bus */
> -+ //{
> -+ // .virtual = TS72XX_PC104_8BIT_IO_VIRT_BASE,
> -+ // .pfn = __phys_to_pfn(TS72XX_PC104_8BIT_IO_PHYS_BASE),
> -+ // .length = TS72XX_PC104_8BIT_IO_SIZE,
> -+ // .type = MT_DEVICE,
> -+ //},
> -+ ///* PC/104 (16-bit) I/O bus */
> -+ //{
> -+ // .virtual = TS72XX_PC104_16BIT_IO_VIRT_BASE,
> -+ // .pfn = __phys_to_pfn(TS72XX_PC104_16BIT_IO_PHYS_BASE),
> -+ // .length = TS72XX_PC104_16BIT_IO_SIZE,
> -+ // .type = MT_DEVICE,
> -+ //},
> -+ ///* PC/104 (8-bit) MEM bus */
> -+ //{
> -+ // .virtual = TS72XX_PC104_8BIT_MEM_VIRT_BASE,
> -+ // .pfn = __phys_to_pfn(TS72XX_PC104_8BIT_MEM_PHYS_BASE),
> -+ // .length = TS72XX_PC104_8BIT_MEM_SIZE,
> -+ // .type = MT_DEVICE,
> -+ //},
> -+ ///* PC/104 (16-bit) MEM bus */
> -+ //{
> -+ // .virtual = TS72XX_PC104_16BIT_MEM_VIRT_BASE,
> -+ // .pfn = __phys_to_pfn(TS72XX_PC104_16BIT_MEM_PHYS_BASE),
> -+ // .length = TS72XX_PC104_16BIT_MEM_SIZE,
> -+ // .type = MT_DEVICE,
> -+ //}
> - };
> -
> - static void __init ts72xx_map_io(void)
> -@@ -194,7 +223,9 @@ static void __init ts72xx_register_flash(void)
> - }
> - }
> -
> --
> -+/*************************************************************************
> -+ * RTC
> -+ *************************************************************************/
> - static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
> - {
> - __raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
> -@@ -242,6 +273,9 @@ static struct platform_device ts72xx_wdt_device = {
> - };
> -
> - static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
> -+/*************************************************************************
> -+ * Ethernet
> -+ *************************************************************************/
> - .phy_id = 1,
> - };
> -
> -@@ -253,6 +287,9 @@ static void __init ts72xx_init_machine(void)
> - platform_device_register(&ts72xx_wdt_device);
> -
> - ep93xx_register_eth(&ts72xx_eth_data, 1);
> -+
> -+ /* PWM1 is DIO_6 on TS-72xx header */
> -+ ep93xx_register_pwm(0, 1);
> - }
> -
> - MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
> -diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
> -index 86f80aa..11ea759 100644
> ---- a/arch/arm/mm/proc-arm920.S
> -+++ b/arch/arm/mm/proc-arm920.S
> -@@ -190,7 +190,7 @@ ENTRY(arm920_coherent_kern_range)
> - */
> - ENTRY(arm920_coherent_user_range)
> - bic r0, r0, #CACHE_DLINESIZE - 1
> --1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
> -+1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
> - mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
> - add r0, r0, #CACHE_DLINESIZE
> - cmp r0, r1
> -@@ -390,6 +390,9 @@ __arm920_setup:
> - mrc p15, 0, r0, c1, c0 @ get control register v4
> - bic r0, r0, r5
> - orr r0, r0, r6
> -+#ifdef CONFIG_CR1_NFBIT
> -+ orr r0, r0, #0x40000000 @ set nF
> -+#endif
> - mov pc, lr
> - .size __arm920_setup, . - __arm920_setup
> -
> -diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
> -index 6bf8e87..fb20532 100644
> ---- a/scripts/Makefile.fwinst
> -+++ b/scripts/Makefile.fwinst
> -@@ -37,7 +37,7 @@ install-all-dirs: $(installed-fw-dirs)
> - @true
> -
> - quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@)
> -- cmd_install = $(INSTALL) -m0644 $< $@
> -+ cmd_install = $(INSTALL) -m 0644 $< $@
> -
> - $(installed-fw-dirs):
> - $(call cmd,mkdir)
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0002-ts72xx_force_machine-id.patch b/recipes/linux/linux-2.6.36/ts72xx/0002-ts72xx_force_machine-id.patch
> deleted file mode 100644
> index 4b90ec6..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0002-ts72xx_force_machine-id.patch
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -From 841896f3124d3493f5bb1b98370a1d5fcdcaedb4 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Thu, 10 Jun 2010 10:51:39 +0200
> -Subject: [PATCH 02/24] ts72xx_force_machine-id
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/kernel/head.S | 3 +++
> - arch/arm/mach-ep93xx/Kconfig | 7 +++++++
> - 2 files changed, 10 insertions(+), 0 deletions(-)
> -
> -diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
> -index eb62bf9..543eccf 100644
> ---- a/arch/arm/kernel/head.S
> -+++ b/arch/arm/kernel/head.S
> -@@ -82,6 +82,9 @@ ENTRY(stext)
> - bl __lookup_processor_type @ r5=procinfo r9=cpuid
> - movs r10, r5 @ invalid processor (r5=0)?
> - beq __error_p @ yes, error 'p'
> -+#ifdef CONFIG_MACH_TS72XX_FORCE_MACHINEID
> -+ ldr r1, =0x2a1
> -+#endif
> - bl __lookup_machine_type @ r5=machinfo
> - movs r8, r5 @ invalid machine (r5=0)?
> - beq __error_a @ yes, error 'a'
> -diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> -index b6be37e..bd463a0 100644
> ---- a/arch/arm/mach-ep93xx/Kconfig
> -+++ b/arch/arm/mach-ep93xx/Kconfig
> -@@ -205,6 +205,13 @@ config EP93XX_EARLY_UART3
> -
> - endchoice
> -
> -+config MACH_TS72XX_FORCE_MACHINEID
> -+ bool "Force Machine ID"
> -+ depends on MACH_TS72XX
> -+ help
> -+ Say 'Y' here to force Machine ID to 0x2A1 (MACH_TYPE_TS72XX legacy value)
> -+ In early days Technologic Systems fixed the 0x163 value in redboot.
> -+
> - endmenu
> -
> - endif
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0003-ep93xx_cpuinfo.patch b/recipes/linux/linux-2.6.36/ts72xx/0003-ep93xx_cpuinfo.patch
> deleted file mode 100644
> index 61a9c18..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0003-ep93xx_cpuinfo.patch
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -From 31727a8a72dc85dc4dc0eeeb27f7f9313c74914b Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Thu, 10 Jun 2010 10:59:31 +0200
> -Subject: [PATCH 03/24] ep93xx_cpuinfo
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/kernel/setup.c | 9 +++++++++
> - 1 files changed, 9 insertions(+), 0 deletions(-)
> -
> -diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> -index d5231ae..a47ad88 100644
> ---- a/arch/arm/kernel/setup.c
> -+++ b/arch/arm/kernel/setup.c
> -@@ -953,6 +953,15 @@ static int c_show(struct seq_file *m, void *v)
> - seq_puts(m, "\n");
> -
> - seq_printf(m, "Hardware\t: %s\n", machine_name);
> -+
> -+ #if defined(CONFIG_ARCH_EP93XX)
> -+ #include <mach/io.h>
> -+ #include <mach/ep93xx-regs.h>
> -+ system_rev = *((unsigned int *)EP93XX_SYSCON_CHIPID) >> 28;
> -+ system_serial_low = *((unsigned int *)EP93XX_SECURITY_UNIQID);
> -+ system_serial_high = 0;
> -+ #endif
> -+
> - seq_printf(m, "Revision\t: %04x\n", system_rev);
> - seq_printf(m, "Serial\t\t: %08x%08x\n",
> - system_serial_high, system_serial_low);
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0004-ep93xx_eth.patch b/recipes/linux/linux-2.6.36/ts72xx/0004-ep93xx_eth.patch
> deleted file mode 100644
> index 734fb93..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0004-ep93xx_eth.patch
> +++ /dev/null
> @@ -1,555 +0,0 @@
> -From 802fa6d7ec0d57684912b39f0fb0341698cda4e3 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Thu, 10 Jun 2010 13:34:14 +0200
> -Subject: [PATCH 04/24] ep93xx_eth
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/net/arm/Kconfig | 1 +
> - drivers/net/arm/ep93xx_eth.c | 346 ++++++++++++++++++++++++++++++++++--------
> - 2 files changed, 280 insertions(+), 67 deletions(-)
> -
> -diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
> -index 39e1c0d..55c0dd4 100644
> ---- a/drivers/net/arm/Kconfig
> -+++ b/drivers/net/arm/Kconfig
> -@@ -52,6 +52,7 @@ config EP93XX_ETH
> - tristate "EP93xx Ethernet support"
> - depends on ARM && ARCH_EP93XX
> - select MII
> -+ select PHYLIB
> - help
> - This is a driver for the ethernet hardware included in EP93xx CPUs.
> - Say Y if you are building a kernel for EP93xx based devices.
> -diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c
> -index 4a5ec94..7e60c4d 100644
> ---- a/drivers/net/arm/ep93xx_eth.c
> -+++ b/drivers/net/arm/ep93xx_eth.c
> -@@ -2,6 +2,7 @@
> - * EP93xx ethernet network device driver
> - * Copyright (C) 2006 Lennert Buytenhek <buytenh at wantstofly.org>
> - * Dedicated to Marija Kulikova.
> -+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr at gnu.org>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> -@@ -16,6 +17,7 @@
> - #include <linux/kernel.h>
> - #include <linux/netdevice.h>
> - #include <linux/mii.h>
> -+#include <linux/phy.h>
> - #include <linux/etherdevice.h>
> - #include <linux/ethtool.h>
> - #include <linux/init.h>
> -@@ -27,8 +29,8 @@
> -
> - #include <mach/hardware.h>
> -
> --#define DRV_MODULE_NAME "ep93xx-eth"
> --#define DRV_MODULE_VERSION "0.1"
> -+#define DRV_NAME "ep93xx-eth"
> -+#define DRV_VERSION "0.13"
> -
> - #define RX_QUEUE_ENTRIES 64
> - #define TX_QUEUE_ENTRIES 8
> -@@ -40,6 +42,8 @@
> - #define REG_RXCTL_DEFAULT 0x00073800
> - #define REG_TXCTL 0x0004
> - #define REG_TXCTL_ENABLE 0x00000001
> -+#define REG_TESTCTL 0x0008
> -+#define REG_TESTCTL_MFDX 0x00000040
> - #define REG_MIICMD 0x0010
> - #define REG_MIICMD_READ 0x00008000
> - #define REG_MIICMD_WRITE 0x00004000
> -@@ -48,6 +52,9 @@
> - #define REG_MIISTS_BUSY 0x00000001
> - #define REG_SELFCTL 0x0020
> - #define REG_SELFCTL_RESET 0x00000001
> -+#define REG_SELFCTL_MDCDIV_MSK 0x00007e00
> -+#define REG_SELFCTL_MDCDIV_OFS 9
> -+#define REG_SELFCTL_PSPRS 0x00000100
> - #define REG_INTEN 0x0024
> - #define REG_INTEN_TX 0x00000008
> - #define REG_INTEN_RX 0x00000007
> -@@ -177,8 +184,14 @@ struct ep93xx_priv
> -
> - struct net_device_stats stats;
> -
> -- struct mii_if_info mii;
> - u8 mdc_divisor;
> -+ int phy_supports_mfps:1;
> -+
> -+ struct mii_bus mii_bus;
> -+ struct phy_device *phy_dev;
> -+ int speed;
> -+ int duplex;
> -+ int link;
> - };
> -
> - #define rdb(ep, off) __raw_readb((ep)->base_addr + (off))
> -@@ -188,46 +201,78 @@ struct ep93xx_priv
> - #define wrw(ep, off, val) __raw_writew((val), (ep)->base_addr + (off))
> - #define wrl(ep, off, val) __raw_writel((val), (ep)->base_addr + (off))
> -
> --static int ep93xx_mdio_read(struct net_device *dev, int phy_id, int reg)
> -+/* common MII transactions should take < 100 iterations */
> -+#define EP93XX_PHY_TIMEOUT 2000
> -+
> -+static int ep93xx_mdio_wait(struct mii_bus *bus)
> - {
> -- struct ep93xx_priv *ep = netdev_priv(dev);
> -- int data;
> -- int i;
> -+ struct ep93xx_priv *ep = bus->priv;
> -+ unsigned int timeout = EP93XX_PHY_TIMEOUT;
> -
> -- wrl(ep, REG_MIICMD, REG_MIICMD_READ | (phy_id << 5) | reg);
> -+ while ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY)
> -+ && timeout--)
> -+ cpu_relax();
> -
> -- for (i = 0; i < 10; i++) {
> -- if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
> -- break;
> -- msleep(1);
> -+ if (timeout <= 0) {
> -+ dev_err(&bus->dev, "MII operation timed out\n");
> -+ return -ETIMEDOUT;
> - }
> -
> -- if (i == 10) {
> -- pr_info("mdio read timed out\n");
> -- data = 0xffff;
> -- } else {
> -- data = rdl(ep, REG_MIIDATA);
> -- }
> -+ return 0;
> -+}
> -+
> -+static int ep93xx_mdio_read(struct mii_bus *bus, int mii_id, int reg)
> -+{
> -+ struct ep93xx_priv *ep = bus->priv;
> -+ u32 selfctl;
> -+ u32 data;
> -+
> -+ if (ep93xx_mdio_wait(bus) < 0)
> -+ return -ETIMEDOUT;
> -+
> -+ selfctl = rdl(ep, REG_SELFCTL);
> -
> -- return data;
> -+ if (ep->phy_supports_mfps)
> -+ wrl(ep, REG_SELFCTL, selfctl | REG_SELFCTL_PSPRS);
> -+ else
> -+ wrl(ep, REG_SELFCTL, selfctl & ~REG_SELFCTL_PSPRS);
> -+
> -+ wrl(ep, REG_MIICMD, REG_MIICMD_READ | (mii_id << 5) | reg);
> -+
> -+ if (ep93xx_mdio_wait(bus) < 0)
> -+ return -ETIMEDOUT;
> -+
> -+ data = rdl(ep, REG_MIIDATA);
> -+
> -+ wrl(ep, REG_SELFCTL, selfctl);
> -+
> -+ return data;
> - }
> -
> --static void ep93xx_mdio_write(struct net_device *dev, int phy_id, int reg, int data)
> -+static int ep93xx_mdio_write(struct mii_bus *bus, int mii_id, int reg, u16 data)
> - {
> -- struct ep93xx_priv *ep = netdev_priv(dev);
> -- int i;
> -+ struct ep93xx_priv *ep = bus->priv;
> -+ u32 selfctl;
> -+
> -+ if (ep93xx_mdio_wait(bus) < 0)
> -+ return -ETIMEDOUT;
> -+
> -+ selfctl = rdl(ep, REG_SELFCTL);
> -+
> -+ if (ep->phy_supports_mfps)
> -+ wrl(ep, REG_SELFCTL, selfctl | REG_SELFCTL_PSPRS);
> -+ else
> -+ wrl(ep, REG_SELFCTL, selfctl & ~REG_SELFCTL_PSPRS);
> -
> - wrl(ep, REG_MIIDATA, data);
> -- wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (phy_id << 5) | reg);
> -+ wrl(ep, REG_MIICMD, REG_MIICMD_WRITE | (mii_id << 5) | reg);
> -
> -- for (i = 0; i < 10; i++) {
> -- if ((rdl(ep, REG_MIISTS) & REG_MIISTS_BUSY) == 0)
> -- break;
> -- msleep(1);
> -- }
> -+ if (ep93xx_mdio_wait(bus) < 0)
> -+ return -ETIMEDOUT;
> -
> -- if (i == 10)
> -- pr_info("mdio write timed out\n");
> -+ wrl(ep, REG_SELFCTL, selfctl);
> -+
> -+ return 0;
> - }
> -
> - static struct net_device_stats *ep93xx_get_stats(struct net_device *dev)
> -@@ -557,6 +602,22 @@ err:
> - return 1;
> - }
> -
> -+static int ep93xx_mdio_reset(struct mii_bus *bus)
> -+{
> -+ struct ep93xx_priv *ep = bus->priv;
> -+
> -+ u32 selfctl = rdl(ep, REG_SELFCTL);
> -+
> -+ selfctl &= ~(REG_SELFCTL_MDCDIV_MSK | REG_SELFCTL_PSPRS);
> -+
> -+ selfctl |= (ep->mdc_divisor - 1) << REG_SELFCTL_MDCDIV_OFS;
> -+ selfctl |= REG_SELFCTL_PSPRS;
> -+
> -+ wrl(ep, REG_SELFCTL, selfctl);
> -+
> -+ return 0;
> -+}
> -+
> - static int ep93xx_start_hw(struct net_device *dev)
> - {
> - struct ep93xx_priv *ep = netdev_priv(dev);
> -@@ -575,11 +636,8 @@ static int ep93xx_start_hw(struct net_device *dev)
> - return 1;
> - }
> -
> -- wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9));
> --
> -- /* Does the PHY support preamble suppress? */
> -- if ((ep93xx_mdio_read(dev, ep->mii.phy_id, MII_BMSR) & 0x0040) != 0)
> -- wrl(ep, REG_SELFCTL, ((ep->mdc_divisor - 1) << 9) | (1 << 8));
> -+ /* The reset cleared REG_SELFCTL, so set the MDC divisor again */
> -+ ep93xx_mdio_reset(&ep->mii_bus);
> -
> - /* Receive descriptor ring. */
> - addr = ep->descs_dma_addr + offsetof(struct ep93xx_descs, rdesc);
> -@@ -688,6 +746,8 @@ static int ep93xx_open(struct net_device *dev)
> -
> - wrl(ep, REG_GIINTMSK, REG_GIINTMSK_ENABLE);
> -
> -+ phy_start(ep->phy_dev);
> -+
> - netif_start_queue(dev);
> -
> - return 0;
> -@@ -700,6 +760,9 @@ static int ep93xx_close(struct net_device *dev)
> - napi_disable(&ep->napi);
> - netif_stop_queue(dev);
> -
> -+ if (ep->phy_dev)
> -+ phy_stop(ep->phy_dev);
> -+
> - wrl(ep, REG_GIINTMSK, 0);
> - free_irq(ep->irq, dev);
> - ep93xx_stop_hw(dev);
> -@@ -711,47 +774,44 @@ static int ep93xx_close(struct net_device *dev)
> - static int ep93xx_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
> - {
> - struct ep93xx_priv *ep = netdev_priv(dev);
> -- struct mii_ioctl_data *data = if_mii(ifr);
> -
> -- return generic_mii_ioctl(&ep->mii, data, cmd, NULL);
> -+ return phy_mii_ioctl(ep->phy_dev, ifr, cmd);
> - }
> -
> - static void ep93xx_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
> - {
> -- strcpy(info->driver, DRV_MODULE_NAME);
> -- strcpy(info->version, DRV_MODULE_VERSION);
> -+ strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
> -+ strlcpy(info->version, DRV_VERSION, sizeof(info->version));
> -+ strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
> - }
> -
> - static int ep93xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
> - {
> - struct ep93xx_priv *ep = netdev_priv(dev);
> -- return mii_ethtool_gset(&ep->mii, cmd);
> -+ struct phy_device *phydev = ep->phy_dev;
> -+
> -+ if (!phydev)
> -+ return -ENODEV;
> -+
> -+ return phy_ethtool_gset(phydev, cmd);
> - }
> -
> - static int ep93xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
> - {
> - struct ep93xx_priv *ep = netdev_priv(dev);
> -- return mii_ethtool_sset(&ep->mii, cmd);
> --}
> -+ struct phy_device *phydev = ep->phy_dev;
> -
> --static int ep93xx_nway_reset(struct net_device *dev)
> --{
> -- struct ep93xx_priv *ep = netdev_priv(dev);
> -- return mii_nway_restart(&ep->mii);
> --}
> -+ if (!phydev)
> -+ return -ENODEV;
> -
> --static u32 ep93xx_get_link(struct net_device *dev)
> --{
> -- struct ep93xx_priv *ep = netdev_priv(dev);
> -- return mii_link_ok(&ep->mii);
> -+ return phy_ethtool_sset(phydev, cmd);
> - }
> -
> - static const struct ethtool_ops ep93xx_ethtool_ops = {
> - .get_drvinfo = ep93xx_get_drvinfo,
> - .get_settings = ep93xx_get_settings,
> - .set_settings = ep93xx_set_settings,
> -- .nway_reset = ep93xx_nway_reset,
> -- .get_link = ep93xx_get_link,
> -+ .get_link = ethtool_op_get_link,
> - };
> -
> - static const struct net_device_ops ep93xx_netdev_ops = {
> -@@ -813,6 +873,113 @@ static int ep93xx_eth_remove(struct platform_device *pdev)
> - return 0;
> - }
> -
> -+static void ep93xx_adjust_link(struct net_device *dev)
> -+{
> -+ struct ep93xx_priv *ep = netdev_priv(dev);
> -+ struct phy_device *phydev = ep->phy_dev;
> -+
> -+ int status_change = 0;
> -+
> -+ if (phydev->link) {
> -+ if ((ep->speed != phydev->speed) ||
> -+ (ep->duplex != phydev->duplex)) {
> -+ /* speed and/or duplex state changed */
> -+ u32 testctl = rdl(ep, REG_TESTCTL);
> -+
> -+ if (DUPLEX_FULL == phydev->duplex)
> -+ testctl |= REG_TESTCTL_MFDX;
> -+ else
> -+ testctl &= ~(REG_TESTCTL_MFDX);
> -+
> -+ wrl(ep, REG_TESTCTL, testctl);
> -+
> -+ ep->speed = phydev->speed;
> -+ ep->duplex = phydev->duplex;
> -+ status_change = 1;
> -+ }
> -+ }
> -+
> -+ /* test for online/offline link transition */
> -+ if (phydev->link != ep->link) {
> -+ if (phydev->link) /* link went online */
> -+ netif_tx_schedule_all(dev);
> -+ else { /* link went offline */
> -+ ep->speed = 0;
> -+ ep->duplex = -1;
> -+ }
> -+ ep->link = phydev->link;
> -+
> -+ status_change = 1;
> -+ }
> -+
> -+ if (status_change)
> -+ phy_print_status(phydev);
> -+}
> -+
> -+static int ep93xx_mii_probe(struct net_device *dev, int phy_addr)
> -+{
> -+ struct ep93xx_priv *ep = netdev_priv(dev);
> -+ struct phy_device *phydev = NULL;
> -+ int val;
> -+
> -+ if (phy_addr >= 0 && phy_addr < PHY_MAX_ADDR)
> -+ phydev = ep->mii_bus.phy_map[phy_addr];
> -+
> -+ if (!phydev) {
> -+ pr_info("PHY not found at specified address,"
> -+ " trying autodetection\n");
> -+
> -+ /* find the first phy */
> -+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
> -+ if (ep->mii_bus.phy_map[phy_addr]) {
> -+ phydev = ep->mii_bus.phy_map[phy_addr];
> -+ break;
> -+ }
> -+ }
> -+ }
> -+
> -+ if (!phydev) {
> -+ pr_err("no PHY found\n");
> -+ return -ENODEV;
> -+ }
> -+
> -+ phydev = phy_connect(dev, dev_name(&phydev->dev),
> -+ ep93xx_adjust_link, 0, PHY_INTERFACE_MODE_MII);
> -+
> -+ if (IS_ERR(phydev)) {
> -+ pr_err("Could not attach to PHY\n");
> -+ return PTR_ERR(phydev);
> -+ }
> -+
> -+ ep->phy_supports_mfps = 0;
> -+
> -+ val = phy_read(phydev, MII_BMSR);
> -+ if (val < 0) {
> -+ pr_err("failed to read MII register\n");
> -+ return val;
> -+ }
> -+
> -+ if (val & 0x0040) {
> -+ pr_info("PHY supports MII frame preamble suppression\n");
> -+ ep->phy_supports_mfps = 1;
> -+ }
> -+
> -+ phydev->supported &= PHY_BASIC_FEATURES;
> -+
> -+ phydev->advertising = phydev->supported;
> -+
> -+ ep->link = 0;
> -+ ep->speed = 0;
> -+ ep->duplex = -1;
> -+ ep->phy_dev = phydev;
> -+
> -+ pr_info("attached PHY driver [%s] "
> -+ "(mii_bus:phy_addr=%s, irq=%d)\n",
> -+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
> -+
> -+ return 0;
> -+}
> -+
> - static int ep93xx_eth_probe(struct platform_device *pdev)
> - {
> - struct ep93xx_eth_data *data;
> -@@ -820,7 +987,7 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
> - struct ep93xx_priv *ep;
> - struct resource *mem;
> - int irq;
> -- int err;
> -+ int err, i;
> -
> - if (pdev == NULL)
> - return -ENODEV;
> -@@ -847,24 +1014,43 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
> - if (ep->res == NULL) {
> - dev_err(&pdev->dev, "Could not reserve memory region\n");
> - err = -ENOMEM;
> -- goto err_out;
> -+ goto err_out_request_mem_region;
> - }
> -
> - ep->base_addr = ioremap(mem->start, resource_size(mem));
> - if (ep->base_addr == NULL) {
> - dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
> - err = -EIO;
> -- goto err_out;
> -+ goto err_out_ioremap;
> - }
> - ep->irq = irq;
> -
> -- ep->mii.phy_id = data->phy_id;
> -- ep->mii.phy_id_mask = 0x1f;
> -- ep->mii.reg_num_mask = 0x1f;
> -- ep->mii.dev = dev;
> -- ep->mii.mdio_read = ep93xx_mdio_read;
> -- ep->mii.mdio_write = ep93xx_mdio_write;
> -+ /* mdio/mii bus */
> -+ ep->mii_bus.state = MDIOBUS_ALLOCATED; /* see mdiobus_alloc */
> -+ ep->mii_bus.name = "ep93xx_mii_bus";
> -+ snprintf(ep->mii_bus.id, MII_BUS_ID_SIZE, "0");
> -+
> -+ ep->mii_bus.read = ep93xx_mdio_read;
> -+ ep->mii_bus.write = ep93xx_mdio_write;
> -+ ep->mii_bus.reset = ep93xx_mdio_reset;
> -+
> -+ ep->mii_bus.phy_mask = 0;
> -+
> -+ ep->mii_bus.priv = ep;
> -+ ep->mii_bus.dev = dev->dev;
> -+
> -+ ep->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
> -+ if (NULL == ep->mii_bus.irq) {
> -+ dev_err(&pdev->dev, "Could not allocate memory\n");
> -+ err = -ENOMEM;
> -+ goto err_out_mii_bus_irq_kmalloc;
> -+ }
> -+
> -+ for (i = 0; i < PHY_MAX_ADDR; i++)
> -+ ep->mii_bus.irq[i] = PHY_POLL;
> -+
> - ep->mdc_divisor = 40; /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz. */
> -+ ep->phy_supports_mfps = 0; /* probe without preamble suppression */
> -
> - if (is_zero_ether_addr(dev->dev_addr))
> - random_ether_addr(dev->dev_addr);
> -@@ -872,14 +1058,39 @@ static int ep93xx_eth_probe(struct platform_device *pdev)
> - err = register_netdev(dev);
> - if (err) {
> - dev_err(&pdev->dev, "Failed to register netdev\n");
> -- goto err_out;
> -+ goto err_out_register_netdev;
> -+ }
> -+
> -+ err = mdiobus_register(&ep->mii_bus);
> -+ if (err) {
> -+ dev_err(&dev->dev, "Could not register MII bus\n");
> -+ goto err_out_mdiobus_register;
> -+ }
> -+
> -+ err = ep93xx_mii_probe(dev, data->phy_id);
> -+ if (err) {
> -+ dev_err(&dev->dev, "failed to probe MII bus\n");
> -+ goto err_out_mii_probe;
> - }
> -
> -- printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, %pM\n",
> -- dev->name, ep->irq, dev->dev_addr);
> -+ dev_info(&dev->dev, "ep93xx on-chip ethernet, IRQ %d, %pM\n",
> -+ ep->irq, dev->dev_addr);
> -
> - return 0;
> -
> -+err_out_mii_probe:
> -+ mdiobus_unregister(&ep->mii_bus);
> -+err_out_mdiobus_register:
> -+ unregister_netdev(dev);
> -+err_out_register_netdev:
> -+ kfree(ep->mii_bus.irq);
> -+err_out_mii_bus_irq_kmalloc:
> -+ iounmap(ep->base_addr);
> -+err_out_ioremap:
> -+ release_resource(ep->res);
> -+ kfree(ep->res);
> -+err_out_request_mem_region:
> -+ free_netdev(dev);
> - err_out:
> - ep93xx_eth_remove(pdev);
> - return err;
> -@@ -897,7 +1108,6 @@ static struct platform_driver ep93xx_eth_driver = {
> -
> - static int __init ep93xx_eth_init_module(void)
> - {
> -- printk(KERN_INFO DRV_MODULE_NAME " version " DRV_MODULE_VERSION " loading\n");
> - return platform_driver_register(&ep93xx_eth_driver);
> - }
> -
> -@@ -908,5 +1118,7 @@ static void __exit ep93xx_eth_cleanup_module(void)
> -
> - module_init(ep93xx_eth_init_module);
> - module_exit(ep93xx_eth_cleanup_module);
> -+
> - MODULE_LICENSE("GPL");
> --MODULE_ALIAS("platform:ep93xx-eth");
> -+MODULE_DESCRIPTION("EP93XX Ethernet driver");
> -+MODULE_ALIAS("platform:" DRV_NAME);
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0005-ep93xx-m2m-DMA-support.patch b/recipes/linux/linux-2.6.36/ts72xx/0005-ep93xx-m2m-DMA-support.patch
> deleted file mode 100644
> index 0a81782..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0005-ep93xx-m2m-DMA-support.patch
> +++ /dev/null
> @@ -1,886 +0,0 @@
> -From 619f5711bc905176dc23de3e646686bee36f1601 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Thu, 10 Jun 2010 16:40:16 +0200
> -Subject: [PATCH 05/24] ep93xx: m2m DMA support
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/Makefile | 2 +-
> - arch/arm/mach-ep93xx/dma-m2m.c | 753 +++++++++++++++++++++++++++++++
> - arch/arm/mach-ep93xx/include/mach/dma.h | 65 +++
> - 3 files changed, 819 insertions(+), 1 deletions(-)
> - create mode 100644 arch/arm/mach-ep93xx/dma-m2m.c
> -
> -diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
> -index 33ee2c8..ea652c2 100644
> ---- a/arch/arm/mach-ep93xx/Makefile
> -+++ b/arch/arm/mach-ep93xx/Makefile
> -@@ -1,7 +1,7 @@
> - #
> - # Makefile for the linux kernel.
> - #
> --obj-y := core.o clock.o dma-m2p.o gpio.o
> -+obj-y := core.o clock.o dma-m2p.o dma-m2m.o gpio.o
> - obj-m :=
> - obj-n :=
> - obj- :=
> -diff --git a/arch/arm/mach-ep93xx/dma-m2m.c b/arch/arm/mach-ep93xx/dma-m2m.c
> -new file mode 100644
> -index 0000000..8b0d720
> ---- /dev/null
> -+++ b/arch/arm/mach-ep93xx/dma-m2m.c
> -@@ -0,0 +1,753 @@
> -+/*
> -+ * arch/arm/mach-ep93xx/dma-m2m.c
> -+ * M2M DMA handling for Cirrus EP93xx chips.
> -+ * Copyright (C) 2007 Metasoft <prylowski at xxxxxxxxxxx>
> -+ *
> -+ * Based on dma-m2p.c by:
> -+ * Copyright (C) 2006 Lennert Buytenhek <buytenh at xxxxxxxxxxxxxx>
> -+ * Copyright (C) 2006 Applied Data Systems
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or (at
> -+ * your option) any later version.
> -+ */
> -+
> -+#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/clk.h>
> -+#include <linux/err.h>
> -+#include <linux/interrupt.h>
> -+#include <linux/module.h>
> -+#include <linux/string.h>
> -+#include <linux/io.h>
> -+
> -+#include <mach/dma.h>
> -+#include <mach/hardware.h>
> -+
> -+/* TEMP */
> -+#define DPRINTK(fmt, args...)
> -+
> -+#define M2M_CONTROL 0x00
> -+#define M2M_INTERRUPT 0x04
> -+#define M2M_STATUS 0x0c
> -+#define M2M_BCR0 0x10
> -+#define M2M_BCR1 0x14
> -+#define M2M_SAR_BASE0 0x18
> -+#define M2M_SAR_BASE1 0x1c
> -+#define M2M_SAR_CURR0 0x24
> -+#define M2M_SAR_CURR1 0x28
> -+#define M2M_DAR_BASE0 0x2c
> -+#define M2M_DAR_BASE1 0x30
> -+#define M2M_DAR_CURR0 0x34
> -+#define M2M_DAR_CURR1 0x3c
> -+
> -+
> -+/* control register bits */
> -+#define CTRL_STALL_INT_EN 0x00000001 /* stall interrupt enable */
> -+#define CTRL_SCT 0x00000002 /* source copy transfer
> -+ (1 elem. from source fills
> -+ destination block */
> -+#define CTRL_DONE_INT_EN 0x00000004 /* done interrupt enable */
> -+#define CTRL_ENABLE 0x00000008 /* channel enable / disable,
> -+ should be set after
> -+ write to SAR/DAR/BCR
> -+ registers */
> -+#define CTRL_NFB_INT_EN 0x00200000 /* nfb (next frame buffer)
> -+ interrupt enable */
> -+
> -+
> -+#define CTRL_START 0x00000010 /* software triggered
> -+ dma start, not used
> -+ for M2P/P2M/IDE/SSP */
> -+#define CTRL_BWC_MASK 0x000001e0 /* bandwidth control (number
> -+ of bytes in a block
> -+ transfer, only M2M */
> -+#define CTRL_BWC_SHIFT 5
> -+
> -+#define BWC_FULL 0x0 /* full bandwidth utilized */
> -+#define BWC_16 0x1 /* 16 bytes per block */
> -+#define BWC_32 0x5
> -+#define BWC_64 0x6
> -+#define BWC_128 0x7
> -+#define BWC_256 0x8
> -+#define BWC_512 0x9
> -+#define BWC_1024 0xa
> -+#define BWC_2048 0xb
> -+#define BWC_4096 0xc
> -+#define BWC_8192 0xd
> -+#define BWC_16384 0xe
> -+#define BWC_32768 0xf
> -+
> -+#define CTRL_PW_MASK 0x00000600 /* peripheral width,
> -+ only M2P/P2M */
> -+#define CTRL_PW_SHIFT 9
> -+
> -+#define PW_BYTE 0x0 /* one byte width */
> -+#define PW_HALFWORD 0x1 /* 16 bits */
> -+#define PW_WORD 0x2 /* 32 bits */
> -+#define PW_NOT_USED 0x3
> -+
> -+#define CTRL_DAH 0x00000800 /* destination address
> -+ hold, for M2P */
> -+#define CTRL_SAH 0x00001000 /* source address
> -+ hold, for P2M */
> -+#define CTRL_TM_MASK 0x00006000 /* transfer mode */
> -+#define CTRL_TM_SHIFT 13
> -+
> -+#define TM_M2M 0x0 /* software initiated M2M transfer */
> -+#define TM_M2P 0x1 /* memory to ext. peripheral
> -+ or IDE/SSP */
> -+#define TM_P2M 0x2 /* ext. peripheral or IDE/SSP
> -+ to memory */
> -+#define TM_NOT_USED 0x3
> -+
> -+#define CTRL_ETDP_MASK 0x00018000 /* end of transfer/terminal
> -+ count pin direction
> -+ & polarity */
> -+#define CTRL_ETDP_SHIFT 15
> -+
> -+#define ETDP_ACT_LOW_EOT 0x0 /* pin programmed as active
> -+ * low end-of-transfer input */
> -+#define ETDP_ACT_HIGH_EOT 0x1 /* active high eot input */
> -+#define ETDP_ACT_LOW_TC 0x2 /* active low terminal count output */
> -+#define ETDP_ACT_HIGH_TC 0x3 /* active high tc output */
> -+
> -+#define CTRL_DACKP 0x00020000 /* dma acknowledge pin
> -+ polarity */
> -+#define CTRL_DREQP_MASK 0x00180000 /* dma request pin polarity */
> -+#define CTRL_DREQP_SHIFT 19
> -+
> -+#define DREQP_ACT_LOW_LEVEL 0x0 /* DREQ is active low, level
> -+ sensitive */
> -+#define DREQP_ACT_HIGH_LEVEL 0x1 /* active high, level sensitive */
> -+#define DREQP_ACT_LOW_EDGE 0x2 /* active low, edge sensitive */
> -+#define DREQP_ACT_HIGH_EDGE 0x3 /* active high, edge sensitive */
> -+
> -+
> -+#define CTRL_RSS_MASK 0x00c00000 /* request source selection */
> -+#define CTRL_RSS_SHIFT 22
> -+
> -+#define RSS_EXT 0x0 /* external dma request */
> -+#define RSS_SSP_RX 0x1 /* internal SSPRx */
> -+#define RSS_SSP_TX 0x2 /* internal SSPTx */
> -+#define RSS_IDE 0x3 /* internal IDE */
> -+
> -+#define CTRL_NO_HDSK 0x01000000 /* no handshake, required for
> -+ SSP/IDE, optional for
> -+ ext. M2P/P2M */
> -+
> -+/* interrupt register bits */
> -+#define INTR_STALL 0x1
> -+#define INTR_DONE 0x2
> -+#define INTR_NFB 0x4
> -+#define INTR_ALL 0x7
> -+
> -+/* status register bits */
> -+#define STAT_STALL 0x0001 /* waiting for software start
> -+ or device request */
> -+#define STAT_CTL_STATE_MASK 0x000e /* control fsm state */
> -+#define STAT_CTL_STATE_SHIFT 1
> -+
> -+#define CTL_STATE_IDLE 0x0
> -+#define CTL_STATE_STALL 0x1
> -+#define CTL_STATE_MEM_RD 0x2
> -+#define CTL_STATE_MEM_WR 0x3
> -+#define CTL_STATE_BWC_WAIT 0x4
> -+
> -+#define STAT_BUF_STATE_MASK 0x0030 /* buffer fsm state */
> -+#define STAT_BUF_STATE_SHIFT 4
> -+
> -+#define BUF_STATE_NO_BUF 0x0
> -+#define BUF_STATE_BUF_ON 0x1
> -+#define BUF_STATE_BUF_NEXT 0x2
> -+
> -+#define STAT_DONE 0x0040 /* transfer completed successfully
> -+ (by device or BCR is 0) */
> -+
> -+#define STAT_TCS_MASK 0x0018 /* terminal count status */
> -+#define STAT_TCS_SHIFT 7
> -+
> -+#define TCS_NONE 0x0 /* terminal count not reached
> -+ for buffer0 and buffer1 */
> -+#define TCS_BUF0 0x1 /* terminal count reached
> -+ for buffer0 */
> -+#define TCS_BUF1 0x2
> -+#define TCS_BOTH 0x3 /* terminal count reached
> -+ for both buffers */
> -+
> -+#define STAT_EOTS_MASK 0x0060 /* end of transfer status */
> -+#define STAT_EOTS_SHIFT 9
> -+
> -+#define EOTS_NONE 0x0 /* end of transfer has not been
> -+ requested by ext. periph. for
> -++ any buffer */
> -+#define EOTS_BUF0 0x1 /* eot requested for buffer0 */
> -+#define EOTS_BUF1 0x2
> -+#define EOTS_BOTH 0x3 /* eot requested for both buffers */
> -+
> -+#define STAT_NFB 0x0800 /* next frame buffer interrupt */
> -+#define STAT_NB 0x1000 /* next buffer status, inform which
> -+ buffer is free for update */
> -+#define STAT_DREQS 0x2000 /* status of dma request signal from
> -+ ext. periph or IDE/SSP request */
> -+
> -+/* IDE/SSP support */
> -+#define IDE_UDMA_DATAOUT 0x20
> -+#define IDE_UDMA_DATAIN 0x24
> -+
> -+#ifndef SSPDR
> -+#define SSPDR 0x08
> -+#endif
> -+
> -+struct m2m_channel {
> -+ char *name;
> -+ void __iomem *base;
> -+ int irq;
> -+
> -+ struct clk *clk;
> -+ spinlock_t lock;
> -+
> -+ void *client;
> -+ unsigned next_slot:1;
> -+ struct ep93xx_dma_buffer *buffer_xfer;
> -+ struct ep93xx_dma_buffer *buffer_next;
> -+ struct list_head buffers_pending;
> -+};
> -+
> -+static struct m2m_channel m2m_rxtx[] = {
> -+ {"m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0},
> -+ {"m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1},
> -+ {NULL},
> -+};
> -+
> -+
> -+static void feed_buf(struct m2m_channel *ch, struct ep93xx_dma_buffer *buf)
> -+{
> -+ struct ep93xx_dma_m2m_client *cl = ch->client;
> -+ u32 src_addr, dst_addr;
> -+
> -+ if ((cl->flags & EP93XX_DMA_M2M_DIR_MASK) == EP93XX_DMA_M2M_TX) {
> -+ src_addr = buf->bus_addr;
> -+ switch (cl->flags & EP93XX_DMA_M2M_DEV_MASK) {
> -+ case EP93XX_DMA_M2M_DEV_IDE:
> -+ dst_addr = EP93XX_IDE_PHYS_BASE + IDE_UDMA_DATAOUT;
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_SSP:
> -+ dst_addr = EP93XX_SPI_PHYS_BASE + SSPDR;
> -+ break;
> -+ default:
> -+ dst_addr = buf->bus_addr2;
> -+ break;
> -+ }
> -+ } else {
> -+ switch (cl->flags & EP93XX_DMA_M2M_DEV_MASK) {
> -+ case EP93XX_DMA_M2M_DEV_IDE:
> -+ src_addr = EP93XX_IDE_PHYS_BASE + IDE_UDMA_DATAIN;
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_SSP:
> -+ src_addr = EP93XX_SPI_PHYS_BASE + SSPDR;
> -+ break;
> -+ default:
> -+ src_addr = buf->bus_addr2;
> -+ break;
> -+ }
> -+ dst_addr = buf->bus_addr;
> -+ }
> -+
> -+ if (ch->next_slot == 0) {
> -+ DPRINTK("Writing src_addr: %08x\n", src_addr);
> -+ DPRINTK("Writing dest_addr: %08x\n", dst_addr);
> -+ DPRINTK("Writing size: %08x\n", buf->size);
> -+ writel(src_addr, ch->base + M2M_SAR_BASE0);
> -+ writel(dst_addr, ch->base + M2M_DAR_BASE0);
> -+ writel(buf->size, ch->base + M2M_BCR0);
> -+ } else {
> -+ writel(src_addr, ch->base + M2M_SAR_BASE1);
> -+ writel(dst_addr, ch->base + M2M_DAR_BASE1);
> -+ writel(buf->size, ch->base + M2M_BCR1);
> -+ }
> -+ ch->next_slot ^= 1;
> -+ DPRINTK("data size = %d, slot %d\n", buf->size, ch->next_slot ^ 1);
> -+}
> -+
> -+static void choose_buffer_xfer(struct m2m_channel *ch)
> -+{
> -+ struct ep93xx_dma_buffer *buf;
> -+
> -+ ch->buffer_xfer = NULL;
> -+ if (!list_empty(&ch->buffers_pending)) {
> -+ buf = list_entry(ch->buffers_pending.next,
> -+ struct ep93xx_dma_buffer, list);
> -+ list_del(&buf->list);
> -+ feed_buf(ch, buf);
> -+ ch->buffer_xfer = buf;
> -+ }
> -+}
> -+
> -+static void choose_buffer_next(struct m2m_channel *ch)
> -+{
> -+ struct ep93xx_dma_buffer *buf;
> -+
> -+ ch->buffer_next = NULL;
> -+ if (!list_empty(&ch->buffers_pending)) {
> -+ buf = list_entry(ch->buffers_pending.next,
> -+ struct ep93xx_dma_buffer, list);
> -+ list_del(&buf->list);
> -+ feed_buf(ch, buf);
> -+ ch->buffer_next = buf;
> -+ }
> -+}
> -+
> -+static irqreturn_t m2m_irq(int irq, void *dev_id)
> -+{
> -+ struct m2m_channel *ch = dev_id;
> -+ struct ep93xx_dma_m2m_client *cl;
> -+ u32 irq_status, dma_state, buf_state, ctl_state;
> -+
> -+ spin_lock(&ch->lock);
> -+ irq_status = readl(ch->base + M2M_INTERRUPT);
> -+ /*if ((irq_status & INTR_ALL) == 0) {
> -+ spin_unlock(&ch->lock);
> -+ return IRQ_NONE;
> -+ }*/
> -+ dma_state = readl(ch->base + M2M_STATUS);
> -+ cl = ch->client;
> -+
> -+ //printk("intr status: %08x, dma state: %08x\n", irq_status, dma_state);
> -+
> -+ DPRINTK("intr status %d, dma state %x\n",
> -+ irq_status, dma_state);
> -+
> -+ buf_state = (dma_state & STAT_BUF_STATE_MASK) >> STAT_BUF_STATE_SHIFT;
> -+ ctl_state = (dma_state & STAT_CTL_STATE_MASK) >> STAT_CTL_STATE_SHIFT;
> -+ /*printk("STAT_CTL_STATE: %d, STAT_BUF_STATE: %d\n",
> -+ * ctl_state, buf_state);*/
> -+ if (ctl_state == CTL_STATE_STALL &&
> -+ buf_state == BUF_STATE_NO_BUF &&
> -+ dma_state & STAT_DONE) {
> -+ /* transfer completed successfully (done) */
> -+
> -+
> -+ /* send client the done command */
> -+ if (cl->buffer_finished) {
> -+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, ch->buffer_xfer->size, 0);
> -+ }
> -+
> -+ writel(0, ch->base + M2M_INTERRUPT);
> -+ choose_buffer_xfer(ch);
> -+ choose_buffer_next(ch);
> -+ if (ch->buffer_xfer != NULL) {
> -+ /* retrigger if more buffers exist */
> -+ if ((cl->flags & EP93XX_DMA_M2M_DEV_MASK) ==
> -+ EP93XX_DMA_M2M_DEV_MEM) {
> -+ DPRINTK("Writing start1 to M2M control\n");
> -+ writel(readl(ch->base + M2M_CONTROL) |
> -+ CTRL_START, ch->base + M2M_CONTROL);
> -+ readl(ch->base + M2M_CONTROL);
> -+ }
> -+ } else {
> -+ DPRINTK("DISABLING DMA: dreqs state: %d\n", dma_state & STAT_DREQS);
> -+
> -+ writel(readl(ch->base + M2M_CONTROL)
> -+ & ~CTRL_ENABLE, ch->base + M2M_CONTROL);
> -+ readl(ch->base + M2M_CONTROL);
> -+ }
> -+ } else if (ctl_state == CTL_STATE_MEM_RD &&
> -+ buf_state == BUF_STATE_BUF_ON &&
> -+ dma_state & STAT_NFB) {
> -+ /* next frame buffer */
> -+ if (cl->buffer_finished) {
> -+ cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, 0);
> -+ }
> -+ ch->buffer_xfer = ch->buffer_next;
> -+ choose_buffer_next(ch);
> -+ }
> -+
> -+ if (cl->buffer_started && ch->buffer_xfer != NULL) {
> -+ cl->buffer_started(cl->cookie, ch->buffer_xfer);
> -+ }
> -+
> -+ spin_unlock(&ch->lock);
> -+ return IRQ_HANDLED;
> -+}
> -+
> -+static struct m2m_channel *find_free_channel(struct ep93xx_dma_m2m_client *cl, int channel_spec)
> -+{
> -+ struct m2m_channel *ch = m2m_rxtx;
> -+ int i;
> -+
> -+#if 0
> -+ /* BMS: This code isn't particularly clear; look like it asserts
> -+ * that a requested channel must not share the same data direction
> -+ * as a previously requested channel - which makes sense for the SSP,
> -+ * but not at all for direct hardware transferrs
> -+ */
> -+ for (i = 0; ch[i].base; i++) {
> -+ struct ep93xx_dma_m2m_client *cl2;
> -+
> -+ cl2 = ch[i].client;
> -+ if (cl2 != NULL) {
> -+ int port;
> -+
> -+ /* two the same devices in the same direction
> -+ are not allowed
> -+ (two "memory devices" should be allowed) */
> -+ port = cl2->flags & (EP93XX_DMA_M2M_DEV_MASK |
> -+ EP93XX_DMA_M2M_DIR_MASK);
> -+ if (port == (cl->flags & (EP93XX_DMA_M2M_DEV_MASK |
> -+ EP93XX_DMA_M2M_DIR_MASK)))
> -+ return NULL;
> -+ }
> -+ }
> -+#endif
> -+
> -+ if (channel_spec == EP93XX_DMA_M2M_REQUIRES_CH_ANY) {
> -+ for (i = 0; ch[i].base; i++) {
> -+ if (ch[i].client == NULL)
> -+ return ch + i;
> -+ }
> -+ } else if (channel_spec == EP93XX_DMA_M2M_REQUIRES_CH_0) {
> -+ if (ch[0].client == NULL) {
> -+ return &(ch[0]);
> -+ }
> -+ } else if (channel_spec == EP93XX_DMA_M2M_REQUIRES_CH_1) {
> -+ if (ch[1].client == NULL) {
> -+ return &(ch[1]);
> -+ }
> -+ } else {
> -+ printk(KERN_ERR "ep93xx-m2m dma channel request: unknown channel spec\n");
> -+ }
> -+ return NULL;
> -+}
> -+
> -+static u32 set_direction_reg(u32 outv, u32 flags)
> -+{
> -+ switch (flags & EP93XX_DMA_M2M_DEV_MASK) {
> -+ case EP93XX_DMA_M2M_DEV_EXT:
> -+ outv &= ~(CTRL_SAH | CTRL_DAH | CTRL_TM_MASK);
> -+
> -+ if (flags & EP93XX_DMA_M2M_EXT_FIFO)
> -+ outv |= (flags & EP93XX_DMA_M2M_DIR_MASK) ==
> -+ EP93XX_DMA_M2M_TX ? CTRL_DAH : CTRL_SAH;
> -+
> -+ outv |= (((flags & EP93XX_DMA_M2M_DIR_MASK) ==
> -+ EP93XX_DMA_M2M_TX) ? TM_M2P : TM_P2M) <<
> -+ CTRL_TM_SHIFT;
> -+
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_IDE:
> -+ outv &= ~(CTRL_SAH | CTRL_DAH | CTRL_TM_MASK | CTRL_PWSC_MASK);
> -+ if ((flags & EP93XX_DMA_M2M_DIR_MASK) == EP93XX_DMA_M2M_TX) {
> -+ outv |= (2 << CTRL_PWSC_SHIFT) & CTRL_PWSC_MASK;
> -+ outv |= CTRL_DAH;
> -+ outv |= TM_M2P << CTRL_TM_SHIFT;
> -+ } else {
> -+ outv |= (1 << CTRL_PWSC_SHIFT) & CTRL_PWSC_MASK;
> -+ outv |= CTRL_SAH;
> -+ outv |= TM_P2M << CTRL_TM_SHIFT;
> -+ }
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_SSP:
> -+ outv &= ~(CTRL_SAH | CTRL_DAH | CTRL_TM_MASK | CTRL_RSS_MASK);
> -+ if ((flags & EP93XX_DMA_M2M_DIR_MASK) == EP93XX_DMA_M2M_TX) {
> -+ outv |= TM_M2P << CTRL_TM_SHIFT;
> -+ outv |= CTRL_DAH;
> -+ outv |= RSS_SSP_TX << CTRL_RSS_SHIFT;
> -+ } else {
> -+ outv |= TM_P2M << CTRL_TM_SHIFT;
> -+ outv |= CTRL_SAH;
> -+ outv |= RSS_SSP_RX << CTRL_RSS_SHIFT;
> -+ }
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_MEM:
> -+ break;
> -+ }
> -+ return outv;
> -+}
> -+
> -+static void channel_enable(struct m2m_channel *ch)
> -+{
> -+ struct ep93xx_dma_m2m_client *cl = ch->client;
> -+ u32 outv = 0;
> -+
> -+ clk_enable(ch->clk);
> -+
> -+ /* set peripheral wait state mask - IFF specified in control word */
> -+ outv |= (cl->flags & CTRL_PWSC_MASK);
> -+ outv |= (cl->flags & EP93XX_DREQ_MASK);
> -+
> -+ DPRINTK("Set outv to: %08x\n",outv);
> -+
> -+ switch (cl->flags & EP93XX_DMA_M2M_DEV_MASK) {
> -+ case EP93XX_DMA_M2M_DEV_EXT:
> -+ switch (cl->flags & EP93XX_DMA_M2M_EXT_WIDTH_MASK) {
> -+ case EP93XX_DMA_M2M_EXT_WIDTH_BYTE:
> -+ outv |= PW_BYTE << CTRL_PW_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_EXT_WIDTH_2BYTES:
> -+ outv |= PW_HALFWORD << CTRL_PW_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_EXT_WIDTH_4BYTES:
> -+ outv |= PW_WORD << CTRL_PW_SHIFT;
> -+ break;
> -+ }
> -+ /* if NO_HDSK then PWSC, if not, then DREQ, DACK, TC/DEOT */
> -+ if (cl->flags & EP93XX_DMA_M2M_EXT_NO_HDSK) {
> -+ outv |= CTRL_NO_HDSK;
> -+ /* TODO: wait states */
> -+ } else {
> -+ /* TODO: regular handshaking */
> -+ }
> -+ outv |= RSS_EXT << CTRL_RSS_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_IDE:
> -+ /* NO_HDSK, PWSC, PW, SAH, DAH */
> -+ outv |= CTRL_NO_HDSK;
> -+ outv |= PW_WORD << CTRL_PW_SHIFT;
> -+ /* PWSC = 1 for read, PWSC = 2 for write in UDMA */
> -+ outv |= RSS_IDE << CTRL_RSS_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_SSP:
> -+ outv |= CTRL_NO_HDSK;
> -+ outv |= PW_HALFWORD << CTRL_PW_SHIFT;
> -+ outv |= (8 << CTRL_PWSC_SHIFT) & CTRL_PWSC_MASK;
> -+ break;
> -+ case EP93XX_DMA_M2M_DEV_MEM:
> -+ switch (cl->flags & EP93XX_DMA_M2M_MEM_SPEED_MASK) {
> -+ case EP93XX_DMA_M2M_MEM_SPEED_FULL:
> -+ outv |= BWC_FULL << CTRL_BWC_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_MEM_SPEED_HALF:
> -+ outv |= BWC_32768 << CTRL_BWC_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_MEM_SPEED_QUART:
> -+ outv |= BWC_16384 << CTRL_BWC_SHIFT;
> -+ break;
> -+ case EP93XX_DMA_M2M_MEM_SPEED_SLOW:
> -+ outv |= BWC_16 << CTRL_BWC_SHIFT;
> -+ break;
> -+ }
> -+ outv |= (cl->flags & EP93XX_DMA_M2M_MEM_FILL) ? CTRL_SCT : 0;
> -+ outv |= TM_M2M << CTRL_TM_SHIFT;
> -+ break;
> -+ }
> -+
> -+ // debug code
> -+ DPRINTK("PRE-Enable, status is: %08x\n", readl(ch->base+M2M_STATUS));
> -+
> -+ outv = set_direction_reg(outv, cl->flags);
> -+ /* STALL interrupt must be enabled */
> -+ outv |= CTRL_NFB_INT_EN | CTRL_DONE_INT_EN | CTRL_STALL_INT_EN;
> -+
> -+ writel(outv, ch->base + M2M_CONTROL);
> -+ outv = readl(ch->base + M2M_CONTROL);
> -+ DPRINTK("channel enable, writing control reg = %08x\n", outv);
> -+}
> -+
> -+static void channel_disable(struct m2m_channel *ch)
> -+{
> -+ u32 v;
> -+
> -+ DPRINTK("Disabling channel\n");
> -+ v = readl(ch->base + M2M_CONTROL);
> -+
> -+ writel(v & ~(CTRL_NFB_INT_EN | CTRL_DONE_INT_EN | CTRL_STALL_INT_EN),
> -+ ch->base + M2M_CONTROL);
> -+
> -+ v = readl(ch->base + M2M_CONTROL);
> -+
> -+ while (readl(ch->base + M2M_STATUS) & STAT_NFB) {
> -+ cpu_relax();
> -+ }
> -+
> -+ writel(0, ch->base + M2M_CONTROL);
> -+
> -+ v = readl(ch->base + M2M_CONTROL);
> -+
> -+ while (readl(ch->base + M2M_STATUS) & STAT_STALL) {
> -+ cpu_relax();
> -+ }
> -+
> -+ clk_disable(ch->clk);
> -+}
> -+
> -+void ep93xx_dma_m2m_set_direction(struct ep93xx_dma_m2m_client *cl,
> -+ int direction)
> -+{
> -+ struct m2m_channel *ch = cl->channel;
> -+ u32 outv;
> -+ unsigned long flags;
> -+
> -+ direction &= EP93XX_DMA_M2M_DIR_MASK;
> -+
> -+ spin_lock_irqsave(&ch->lock, flags);
> -+
> -+ cl->flags &= ~EP93XX_DMA_M2M_DIR_MASK;
> -+ cl->flags |= direction;
> -+
> -+ outv = readl(ch->base + M2M_CONTROL);
> -+ outv = set_direction_reg(outv, cl->flags);
> -+ writel(outv, ch->base + M2M_CONTROL);
> -+ outv = readl(ch->base + M2M_CONTROL);
> -+ DPRINTK("set_direction: configured control reg = %08x\n", outv);
> -+
> -+ spin_unlock_irqrestore(&ch->lock, flags);
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_set_direction);
> -+
> -+int ep93xx_dma_m2m_client_register(struct ep93xx_dma_m2m_client *cl, int channel_spec)
> -+{
> -+ struct m2m_channel *ch;
> -+ int err;
> -+
> -+ ch = find_free_channel(cl, channel_spec);
> -+ if (ch == NULL)
> -+ return -1;
> -+
> -+ err = request_irq(ch->irq, m2m_irq, IRQF_DISABLED, cl->name ? : "dma-m2m", ch);
> -+ if (err)
> -+ return err;
> -+
> -+ ch->client = cl;
> -+ ch->next_slot = 0;
> -+ ch->buffer_xfer = NULL;
> -+ ch->buffer_next = NULL;
> -+ INIT_LIST_HEAD(&ch->buffers_pending);
> -+
> -+ cl->channel = ch;
> -+
> -+ channel_enable(ch);
> -+
> -+ return 0;
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_client_register);
> -+
> -+void ep93xx_dma_m2m_client_unregister(struct ep93xx_dma_m2m_client *cl)
> -+{
> -+ struct m2m_channel *ch = cl->channel;
> -+
> -+ channel_disable(ch);
> -+ free_irq(ch->irq, ch);
> -+ ch->client = NULL;
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_client_unregister);
> -+
> -+void ep93xx_dma_m2m_submit(struct ep93xx_dma_m2m_client *cl,
> -+ struct ep93xx_dma_buffer *buf)
> -+{
> -+ struct m2m_channel *ch = cl->channel;
> -+ unsigned long flags;
> -+
> -+ spin_lock_irqsave(&ch->lock, flags);
> -+
> -+ if (ch->buffer_xfer == NULL) {
> -+ ch->buffer_xfer = buf;
> -+ feed_buf(ch, buf);
> -+ if (readl(ch->base + M2M_CONTROL) & CTRL_ENABLE) {
> -+ DPRINTK("CTRL_ENABLE\n");
> -+ if ((cl->flags & EP93XX_DMA_M2M_DEV_MASK) ==
> -+ EP93XX_DMA_M2M_DEV_MEM) {
> -+ DPRINTK("WRITING START2 TO M2M control\n");
> -+ writel(readl(ch->base + M2M_CONTROL) |
> -+ CTRL_START, ch->base + M2M_CONTROL);
> -+ readl(ch->base + M2M_CONTROL);
> -+ }
> -+ }
> -+ } else if (ch->buffer_next == NULL) {
> -+ ch->buffer_next = buf;
> -+ feed_buf(ch, buf);
> -+ } else
> -+ list_add_tail(&buf->list, &ch->buffers_pending);
> -+ spin_unlock_irqrestore(&ch->lock, flags);
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_submit);
> -+
> -+void ep93xx_dma_m2m_start(struct ep93xx_dma_m2m_client *cl)
> -+{
> -+ struct m2m_channel *ch = cl->channel;
> -+ u32 v;
> -+
> -+ unsigned long flags;
> -+
> -+ spin_lock_irqsave(&ch->lock, flags);
> -+
> -+ writel(readl(ch->base + M2M_STATUS), ch->base+M2M_STATUS);
> -+ //printk("At start, status is: %08x\n", readl(ch->base + M2M_STATUS));
> -+
> -+ v = readl(ch->base + M2M_CONTROL) | CTRL_ENABLE;
> -+ writel(v, ch->base + M2M_CONTROL);
> -+ v = readl(ch->base + M2M_CONTROL);
> -+ if (ch->buffer_xfer != NULL) {
> -+ if (((cl->flags & EP93XX_DMA_M2M_DEV_MASK) ==
> -+ EP93XX_DMA_M2M_DEV_MEM)) {
> -+ DPRINTK("WRITING START3 to M2M controller\n");
> -+ v |= CTRL_START;
> -+ writel(v, ch->base + M2M_CONTROL);
> -+ v = readl(ch->base + M2M_CONTROL);
> -+ }
> -+ }
> -+
> -+ spin_unlock_irqrestore(&ch->lock, flags);
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_start);
> -+
> -+void ep93xx_dma_m2m_stop(struct ep93xx_dma_m2m_client *cl)
> -+{
> -+ struct m2m_channel *ch = cl->channel;
> -+ u32 v;
> -+ unsigned long flags;
> -+
> -+ spin_lock_irqsave(&ch->lock, flags);
> -+
> -+ DPRINTK("Stopping DMA by disabling CTRL_ENABLE\n");
> -+ v = readl(ch->base + M2M_CONTROL) & ~CTRL_ENABLE;
> -+ writel(v, ch->base + M2M_CONTROL);
> -+ readl(ch->base + M2M_CONTROL);
> -+ DPRINTK("configured control reg = %08x\n", v);
> -+
> -+ spin_unlock_irqrestore(&ch->lock, flags);
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_stop);
> -+
> -+void ep93xx_dma_m2m_flush(struct ep93xx_dma_m2m_client *cl)
> -+{
> -+ struct m2m_channel *ch = cl->channel;
> -+
> -+ channel_disable(ch);
> -+ ch->next_slot = 0;
> -+ ch->buffer_xfer = NULL;
> -+ ch->buffer_next = NULL;
> -+ INIT_LIST_HEAD(&ch->buffers_pending);
> -+ channel_enable(ch);
> -+}
> -+EXPORT_SYMBOL_GPL(ep93xx_dma_m2m_flush);
> -+
> -+static int init_channel(struct m2m_channel *ch)
> -+{
> -+ ch->clk = clk_get(NULL, ch->name);
> -+ if (IS_ERR(ch->clk))
> -+ return PTR_ERR(ch->clk);
> -+
> -+ spin_lock_init(&ch->lock);
> -+ ch->client = NULL;
> -+
> -+ return 0;
> -+}
> -+
> -+static int __init ep93xx_dma_m2m_init(void)
> -+{
> -+ int i;
> -+ int ret;
> -+
> -+ for (i = 0; m2m_rxtx[i].base; i++) {
> -+ ret = init_channel(m2m_rxtx + i);
> -+ if (ret)
> -+ return ret;
> -+ }
> -+
> -+ pr_info("M2M DMA subsystem initialized\n");
> -+ return 0;
> -+}
> -+arch_initcall(ep93xx_dma_m2m_init);
> -diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
> -index 3a5961d..6a3552b 100644
> ---- a/arch/arm/mach-ep93xx/include/mach/dma.h
> -+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
> -@@ -11,6 +11,7 @@
> - struct ep93xx_dma_buffer {
> - struct list_head list;
> - u32 bus_addr;
> -+ u32 bus_addr2; /* only used by M2M */
> - u16 size;
> - };
> -
> -@@ -28,6 +29,7 @@ struct ep93xx_dma_m2p_client {
> - void *channel;
> - };
> -
> -+/* flags (m2p client) */
> - #define EP93XX_DMA_M2P_PORT_I2S1 0x00
> - #define EP93XX_DMA_M2P_PORT_I2S2 0x01
> - #define EP93XX_DMA_M2P_PORT_AAC1 0x02
> -@@ -45,6 +47,58 @@ struct ep93xx_dma_m2p_client {
> - #define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
> - #define EP93XX_DMA_M2P_ERROR_MASK 0x60
> -
> -+
> -+struct ep93xx_dma_m2m_client {
> -+ char *name;
> -+ u32 flags;
> -+ void *cookie;
> -+ void (*buffer_started)(void *cookie,
> -+ struct ep93xx_dma_buffer *buf);
> -+ void (*buffer_finished)(void *cookie,
> -+ struct ep93xx_dma_buffer *buf,
> -+ int bytes, int error);
> -+
> -+ /* Internal to the DMA code. */
> -+ void *channel;
> -+};
> -+
> -+/* flags (m2m client) */
> -+#define EP93XX_DMA_M2M_RX 0x000 /* read from periph./memory */
> -+#define EP93XX_DMA_M2M_TX 0x004 /* write to periph./memory */
> -+#define EP93XX_DMA_M2M_DIR_MASK 0x004 /* direction mask */
> -+#define EP93XX_DMA_M2M_DEV_EXT 0x000 /* external peripheral */
> -+#define EP93XX_DMA_M2M_DEV_SSP 0x001 /* internal SSP */
> -+#define EP93XX_DMA_M2M_DEV_IDE 0x002 /* internal IDE */
> -+#define EP93XX_DMA_M2M_DEV_MEM 0x003 /* memory to memory transfer */
> -+#define EP93XX_DMA_M2M_DEV_MASK 0x003 /* device mask */
> -+#define EP93XX_DMA_M2M_EXT_FIFO 0x008 /* external peripheral is one location fifo */
> -+#define EP93XX_DMA_M2M_EXT_NO_HDSK 0x010 /* external peripheral doesn't require regular handshaking protocol */
> -+#define EP93XX_DMA_M2M_EXT_WIDTH_MASK 0x300
> -+#define EP93XX_DMA_M2M_EXT_WIDTH_BYTE 0x000 /* external peripheral transfer is one byte width */
> -+#define EP93XX_DMA_M2M_EXT_WIDTH_2BYTES 0x100
> -+#define EP93XX_DMA_M2M_EXT_WIDTH_4BYTES 0x200
> -+#define EP93XX_DMA_M2M_MEM_SPEED_FULL 0x000 /* M2M bandwidth control */
> -+#define EP93XX_DMA_M2M_MEM_SPEED_HALF 0x040 /* half bus bandwidth */
> -+#define EP93XX_DMA_M2M_MEM_SPEED_QUART 0x080 /* quarter bus bandwidth */
> -+#define EP93XX_DMA_M2M_MEM_SPEED_SLOW 0x0c0 /* slowest speed */
> -+#define EP93XX_DMA_M2M_MEM_SPEED_MASK 0x0c0 /* memory speed mask */
> -+#define EP93XX_DMA_M2M_MEM_FILL 0x020 /* M2M is one location to block fill */
> -+
> -+/* FIXME */
> -+#define CTRL_PWSC_MASK 0xfe000000 /* peripheral wait states count */
> -+#define CTRL_PWSC_SHIFT 25
> -+#define EP93XX_DREQ_SHIFT 19
> -+#define EP93XX_DREQ_MASK 0x00180000
> -+#define EP93XX_DMA_M2M_DREQ_LS_L (00 << EP93XX_DREQ_SHIFT)
> -+#define EP93XX_DMA_M2M_DREQ_LS_H (01 << EP93XX_DREQ_SHIFT)
> -+#define EP93XX_DMA_M2M_DREQ_ES_L (10 << EP93XX_DREQ_SHIFT)
> -+#define EP93XX_DMA_M2M_DREQ_ES_H (11 << EP93XX_DREQ_SHIFT)
> -+
> -+/* See ep93xx_dma_m2m_client_register (channel_spec) */
> -+#define EP93XX_DMA_M2M_REQUIRES_CH_ANY 0
> -+#define EP93XX_DMA_M2M_REQUIRES_CH_0 1
> -+#define EP93XX_DMA_M2M_REQUIRES_CH_1 2
> -+
> - int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
> - void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
> - void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
> -@@ -53,4 +107,15 @@ void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
> - struct ep93xx_dma_buffer *buf);
> - void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
> -
> -+int ep93xx_dma_m2m_client_register(struct ep93xx_dma_m2m_client *m2m,
> -+ int channel_spec);
> -+void ep93xx_dma_m2m_client_unregister(struct ep93xx_dma_m2m_client *m2m);
> -+void ep93xx_dma_m2m_submit(struct ep93xx_dma_m2m_client *m2m,
> -+ struct ep93xx_dma_buffer *buf);
> -+void ep93xx_dma_m2m_flush(struct ep93xx_dma_m2m_client *m2m);
> -+void ep93xx_dma_m2m_start(struct ep93xx_dma_m2m_client *m2m);
> -+void ep93xx_dma_m2m_stop(struct ep93xx_dma_m2m_client *m2m);
> -+void ep93xx_dma_m2m_set_direction(struct ep93xx_dma_m2m_client *m2m,
> -+ int direction);
> -+
> - #endif /* __ASM_ARCH_DMA_H */
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0006-ts72xx_rs485.patch b/recipes/linux/linux-2.6.36/ts72xx/0006-ts72xx_rs485.patch
> deleted file mode 100644
> index e7ab169..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0006-ts72xx_rs485.patch
> +++ /dev/null
> @@ -1,223 +0,0 @@
> -From 42019ca5561ebd18d47d8811cf06d3cae77ca982 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Thu, 10 Jun 2010 17:00:12 +0200
> -Subject: [PATCH 06/24] ts72xx_rs485
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Crude hack...
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/include/asm/ioctls.h | 3 +
> - drivers/serial/Kconfig | 8 +++
> - drivers/serial/amba-pl010.c | 124 ++++++++++++++++++++++++++++++++++++++++-
> - 3 files changed, 134 insertions(+), 1 deletions(-)
> -
> -diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
> -index 0b30894..a0d7401 100644
> ---- a/arch/arm/include/asm/ioctls.h
> -+++ b/arch/arm/include/asm/ioctls.h
> -@@ -74,6 +74,9 @@
> - #define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
> - #define FIOQSIZE 0x545E
> -
> -+#define TIOC_SBCC485 0x545F /* TS72xx RTS/485 mode clear */
> -+#define TIOC_SBCS485 0x5460 /* TS72xx RTS/485 mode set */
> -+
> - /* Used for packet mode */
> - #define TIOCPKT_DATA 0
> - #define TIOCPKT_FLUSHREAD 1
> -diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> -index 12900f7..d1bff25 100644
> ---- a/drivers/serial/Kconfig
> -+++ b/drivers/serial/Kconfig
> -@@ -296,6 +296,14 @@ config SERIAL_AMBA_PL010_CONSOLE
> - your boot loader (lilo or loadlin) about how to pass options to the
> - kernel at boot time.)
> -
> -+config SERIAL_AMBA_PL010_TS72XX
> -+ bool "Support for RS-485 on AMBA serial port (for TS-72XX SBC)"
> -+ depends on SERIAL_AMBA_PL010 != n && MACH_TS72XX
> -+ help
> -+ This add support for RS-485 on some Technologic System SBC.
> -+
> -+ If unsure, say N.
> -+
> - config SERIAL_AMBA_PL011
> - tristate "ARM AMBA PL011 serial port support"
> - depends on ARM_AMBA
> -diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
> -index 2904aa0..9135233 100644
> ---- a/drivers/serial/amba-pl010.c
> -+++ b/drivers/serial/amba-pl010.c
> -@@ -51,6 +51,10 @@
> -
> - #include <asm/io.h>
> -
> -+#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
> -+#include <mach/ts72xx.h>
> -+#endif
> -+
> - #define UART_NR 8
> -
> - #define SERIAL_AMBA_MAJOR 204
> -@@ -65,6 +69,11 @@
> - #define UART_DUMMY_RSR_RX 256
> - #define UART_PORT_SIZE 64
> -
> -+#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
> -+static void __iomem *ts_rs485_data9_register;
> -+static void __iomem *ts_rs485_control_register;
> -+#endif
> -+
> - /*
> - * We wrap our port structure around the generic uart_port.
> - */
> -@@ -386,7 +395,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
> - /*
> - * Ask the core to calculate the divisor for us.
> - */
> -- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
> -+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
> - quot = uart_get_divisor(port, baud);
> -
> - switch (termios->c_cflag & CSIZE) {
> -@@ -529,6 +538,105 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
> - return ret;
> - }
> -
> -+
> -+#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
> -+static int ts72xx_rs485_init(void)
> -+{
> -+ ts_rs485_data9_register = ioremap(TS72XX_RS485_MODE_PHYS_BASE, 4096);
> -+ if (ts_rs485_data9_register == NULL) {
> -+ return -1;
> -+ }
> -+
> -+ ts_rs485_control_register = ioremap(TS72XX_RS485_CONTROL_PHYS_BASE, 4096);
> -+ if (ts_rs485_control_register == NULL) {
> -+ iounmap(ts_rs485_data9_register);
> -+ return -1;
> -+ }
> -+
> -+ return 0;
> -+}
> -+
> -+static int ts72xx_auto485(struct uart_port *port, unsigned int cmd, unsigned long *arg)
> -+{
> -+ int baud, cflag, mode;
> -+ int datalength;
> -+
> -+ mode = (int)*arg;
> -+ if (!is_rs485_installed()) {
> -+ printk("amba-pl010.c: this board does not support RS485 auto mode\n");
> -+ return -EINVAL;
> -+ }
> -+
> -+ if (port->line != 1) {
> -+ printk("amba-pl010.c: auto RS485 mode is only supported on second port (/dev/ttyAM1)\n");
> -+ return -EINVAL;
> -+ }
> -+
> -+ datalength = 8;
> -+ cflag = port->state->port.tty->termios->c_cflag;
> -+ if (cflag & PARENB)
> -+ datalength++;
> -+
> -+ if (cflag & CSTOPB)
> -+ datalength++;
> -+
> -+ baud = tty_get_baud_rate(port->state->port.tty);
> -+
> -+ switch (cmd) {
> -+ case TIOC_SBCC485:
> -+ if ((mode & TS72XX_RS485_AUTO485FD) || (mode & TS72XX_RS485_AUTO485HD)) {
> -+ printk("amba-pl010.c: unsetting auto RS485 mode\n");
> -+ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_control_register);
> -+ __raw_writew(TS72XX_RS485_MODE_RS232, ts_rs485_data9_register);
> -+ }
> -+ break;
> -+ case TIOC_SBCS485:
> -+ if (mode & TS72XX_RS485_AUTO485FD) {
> -+ printk ("amba-pl010.c: setting FULL duplex auto RS485 mode\n");
> -+ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_control_register);
> -+ if (datalength > 8)
> -+ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
> -+ } else if (mode & TS72XX_RS485_AUTO485HD) {
> -+ printk("amba-pl010.c: setting HALF DUPLEX auto RS485 mode\n");
> -+ switch (baud) {
> -+ case 9600:
> -+ __raw_writew(TS72XX_RS485_MODE_9600_HD, ts_rs485_control_register);
> -+ break;
> -+ case 19200:
> -+ __raw_writew(TS72XX_RS485_MODE_19200_HD, ts_rs485_control_register);
> -+ break;
> -+ case 57600:
> -+ __raw_writew(TS72XX_RS485_MODE_57600_HD, ts_rs485_control_register);
> -+ break;
> -+ case 115200:
> -+ __raw_writew(TS72XX_RS485_MODE_115200_HD, ts_rs485_control_register);
> -+ break;
> -+ default:
> -+ printk("amba-pl010.c: %d baud rate is not supported for auto RS485 mode\n", baud);
> -+ return -1;
> -+ }
> -+ if (datalength > 8)
> -+ __raw_writew(TS72XX_RS485_MODE_FD, ts_rs485_data9_register);
> -+ }
> -+ break;
> -+ }
> -+
> -+ return 0;
> -+}
> -+
> -+static int pl010_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
> -+{
> -+ switch (cmd) {
> -+ case TIOC_SBCC485:
> -+ case TIOC_SBCS485:
> -+ return ts72xx_auto485(port, cmd, (unsigned long *)arg);
> -+ }
> -+
> -+ return -ENOIOCTLCMD;
> -+}
> -+#endif /* CONFIG_SERIAL_AMBA_PL010_TS72XX */
> -+
> -+
> - static struct uart_ops amba_pl010_pops = {
> - .tx_empty = pl010_tx_empty,
> - .set_mctrl = pl010_set_mctrl,
> -@@ -547,6 +655,9 @@ static struct uart_ops amba_pl010_pops = {
> - .request_port = pl010_request_port,
> - .config_port = pl010_config_port,
> - .verify_port = pl010_verify_port,
> -+#if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
> -+ .ioctl = pl010_ioctl,
> -+#endif
> - };
> -
> - static struct uart_amba_port *amba_ports[UART_NR];
> -@@ -805,6 +916,17 @@ static int __init pl010_init(void)
> - ret = uart_register_driver(&amba_reg);
> - if (ret == 0) {
> - ret = amba_driver_register(&pl010_driver);
> -+
> -+ #if defined(CONFIG_SERIAL_AMBA_PL010_TS72XX)
> -+ if (!ret && is_rs485_installed()) {
> -+ ret = ts72xx_rs485_init();
> -+ if (ret)
> -+ printk("amba-pl010.c: ts72xx_rs485_init() failed\n");
> -+ else
> -+ printk("amba-pl010.c: auto RS485 mode initialized\n");
> -+ }
> -+ #endif
> -+
> - if (ret)
> - uart_unregister_driver(&amba_reg);
> - }
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0007-ts72xx_ts_ser1.patch b/recipes/linux/linux-2.6.36/ts72xx/0007-ts72xx_ts_ser1.patch
> deleted file mode 100644
> index 570009b..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0007-ts72xx_ts_ser1.patch
> +++ /dev/null
> @@ -1,264 +0,0 @@
> -From be2d6dfb434c137187d2572d8bf9264748720ece Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Wed, 16 Jun 2010 14:44:44 +0200
> -Subject: [PATCH 07/24] ts72xx_ts_ser1
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -TS-SER1 - Serial Port PC/104 peripheral
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/serial/8250_ts_ser1.c | 197 +++++++++++++++++++++++++++++++++++++++++
> - drivers/serial/Kconfig | 17 ++++
> - drivers/serial/Makefile | 1 +
> - 3 files changed, 215 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/serial/8250_ts_ser1.c
> -
> -diff --git a/drivers/serial/8250_ts_ser1.c b/drivers/serial/8250_ts_ser1.c
> -new file mode 100644
> -index 0000000..e5fe616
> ---- /dev/null
> -+++ b/drivers/serial/8250_ts_ser1.c
> -@@ -0,0 +1,197 @@
> -+/*
> -+ * linux/drivers/serial/8250_ts_ser1.c
> -+ * Technologic Systems TS-SER1 support.
> -+ *
> -+ * (c) Copyright 2006-2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ * Data taken from include/asm-i386/serial.h
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * Pin Number:
> -+ * 1 DCD
> -+ * 2 Receive data
> -+ * 3 Trasmit data
> -+ * 4 DTR
> -+ * 5 Signal Ground
> -+ * 6 DSR
> -+ * 7 RTS
> -+ * 8 CTS
> -+ * 9 RI
> -+ */
> -+
> -+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> -+
> -+#include <linux/module.h>
> -+#include <linux/init.h>
> -+#include <linux/serial_8250.h>
> -+#include <linux/irq.h>
> -+#include <linux/io.h>
> -+#include <mach/hardware.h>
> -+#include <mach/ts72xx.h>
> -+#include <mach/gpio.h>
> -+
> -+#define TS72XX_SER1_IO_PHYS_BASE (TS72XX_PC104_8BIT_IO_PHYS_BASE)
> -+#define TS72XX_SER1_IO_SIZE (TS72XX_PC104_8BIT_IO_SIZE)
> -+
> -+#define TS_SER1_PORT_COM3 0x3E8
> -+#define TS_SER1_PORT_COM4 0x2E8
> -+#define TS_SER1_PORT_COM5 0x3A8
> -+
> -+/* Value to write in 16550A scratch register */
> -+#define MARKER_BYTE 0xAA /* or 0x55 */
> -+
> -+#define PORT(_base,_irq) \
> -+{ \
> -+ .iobase = _base, \
> -+ .membase = (void __iomem *)0, \
> -+ .irq = _irq, \
> -+ .uartclk = 1843200, \
> -+ .iotype = UPIO_PORT, \
> -+ .flags = UPF_BOOT_AUTOCONF, \
> -+}
> -+/* Note: IRQ can be shared (see CONFIG_SERIAL_8250_SHARE_IRQ) */
> -+
> -+
> -+static struct plat_serial8250_port ts72xx_ser1_data_com3[] = {
> -+ PORT(TS_SER1_PORT_COM3, 0),
> -+ { },
> -+};
> -+
> -+static struct plat_serial8250_port ts72xx_ser1_data_com4[] = {
> -+ PORT(TS_SER1_PORT_COM4, 0),
> -+ { },
> -+};
> -+
> -+static struct plat_serial8250_port ts72xx_ser1_data_com5[] = {
> -+ PORT(TS_SER1_PORT_COM5, 0),
> -+ { },
> -+};
> -+
> -+
> -+static int ts_ser1_irq = CONFIG_SERIAL_8250_TS_SER1_IRQ; // 5, 6 or 7
> -+static struct platform_device *serial8250_ts_ser1_dev;
> -+
> -+
> -+static int __init ts_ser1_init(void)
> -+{
> -+ struct plat_serial8250_port *comX = NULL;
> -+ void __iomem *iomem;
> -+
> -+ int ret = -ENODEV;
> -+ int n = 0; // COM number as printed on TS-SER1 pcb
> -+
> -+ iomem = ioremap(TS72XX_SER1_IO_PHYS_BASE, TS72XX_SER1_IO_SIZE);
> -+
> -+ if (iomem != NULL) {
> -+ __raw_writeb(MARKER_BYTE, iomem + TS_SER1_PORT_COM3 + 7);
> -+ if (__raw_readb(iomem + TS_SER1_PORT_COM3 + 7) == MARKER_BYTE) {
> -+ comX = ts72xx_ser1_data_com3;
> -+ n = 3;
> -+ } else {
> -+ __raw_writeb(MARKER_BYTE, iomem + TS_SER1_PORT_COM4 + 7);
> -+ if (__raw_readb(iomem + TS_SER1_PORT_COM4 + 7) == MARKER_BYTE) {
> -+ comX = ts72xx_ser1_data_com4;
> -+ n = 4;
> -+ } else {
> -+ __raw_writeb(MARKER_BYTE, iomem + TS_SER1_PORT_COM5 + 7);
> -+ if (__raw_readb(iomem + TS_SER1_PORT_COM5 + 7) == MARKER_BYTE) {
> -+ comX = ts72xx_ser1_data_com5;
> -+ n = 5;
> -+ }
> -+ }
> -+ }
> -+
> -+ if (comX) {
> -+ switch (ts_ser1_irq) {
> -+ case 5:
> -+ ret = gpio_request(EP93XX_GPIO_LINE_F(3), "TS-SER1");
> -+ if (ret < 0) {
> -+ pr_err("gpio_request failed, try another irq\n");
> -+ goto init_error;
> -+ }
> -+ gpio_direction_input(EP93XX_GPIO_LINE_F(3));
> -+ comX->irq = gpio_to_irq(EP93XX_GPIO_LINE_F(3));
> -+ set_irq_type(comX->irq, IRQ_TYPE_EDGE_RISING);
> -+ break;
> -+ case 6:
> -+ comX->irq = IRQ_EP93XX_EXT1;
> -+ break;
> -+ case 7:
> -+ comX->irq = IRQ_EP93XX_EXT3;
> -+ break;
> -+ default:
> -+ pr_err("wrong specified irq\n");
> -+ goto init_error;
> -+ }
> -+
> -+ comX->iobase += (unsigned long)iomem; // virtual address
> -+
> -+ } else {
> -+ pr_err("can't detect COM number\n");
> -+ goto init_error;
> -+ }
> -+
> -+ /* create platform_device structure */
> -+ serial8250_ts_ser1_dev = platform_device_alloc("serial8250", n);
> -+ if (!serial8250_ts_ser1_dev) {
> -+ ret = -ENOMEM;
> -+ goto init_error;
> -+ }
> -+
> -+ ret = platform_device_add_data(serial8250_ts_ser1_dev, comX,
> -+ 2 * sizeof(struct plat_serial8250_port));
> -+ if (ret) {
> -+ platform_device_put(serial8250_ts_ser1_dev);
> -+ goto init_error;
> -+ }
> -+
> -+ ret = platform_device_add(serial8250_ts_ser1_dev);
> -+ if (ret) {
> -+ platform_device_put(serial8250_ts_ser1_dev);
> -+ goto init_error;
> -+ }
> -+
> -+ platform_set_drvdata(serial8250_ts_ser1_dev, iomem);
> -+ return 0;
> -+ }
> -+
> -+init_error:
> -+ if (iomem) {
> -+ iounmap(iomem);
> -+ iomem = NULL;
> -+ }
> -+ return ret;
> -+}
> -+
> -+static void __exit ts_ser1_exit(void)
> -+{
> -+ struct platform_device *pdev = serial8250_ts_ser1_dev;
> -+ void __iomem *iomem = platform_get_drvdata(pdev);
> -+
> -+ serial8250_ts_ser1_dev = NULL;
> -+
> -+ platform_device_unregister(pdev);
> -+
> -+ iounmap(iomem);
> -+ if (ts_ser1_irq == 5)
> -+ gpio_free(EP93XX_GPIO_LINE_F(3));
> -+}
> -+
> -+module_init(ts_ser1_init);
> -+module_exit(ts_ser1_exit);
> -+
> -+module_param(ts_ser1_irq, int, 0);
> -+MODULE_PARM_DESC(ts_ser1_irq, "TS-SER1 IRQ, default=" __MODULE_STRING(CONFIG_SERIAL_8250_TS_SER1_IRQ) ")");
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("8250 serial probe module for TS-SER1 (TS-72xx)");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION("0.5");
> -diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> -index d1bff25..5667462 100644
> ---- a/drivers/serial/Kconfig
> -+++ b/drivers/serial/Kconfig
> -@@ -267,6 +267,23 @@ config SERIAL_8250_RM9K
> - port hardware found on MIPS RM9122 and similar processors.
> - If unsure, say N.
> -
> -+config SERIAL_8250_TS_SER1
> -+ tristate "Support TS-SER1 (for TS-72XX SBC)"
> -+ depends on SERIAL_8250 != n && MACH_TS72XX
> -+ help
> -+ Say Y here if you have a TS-SER1 PC/104 peripheral.
> -+ COM number will be configured automaticaly.
> -+
> -+ To compile this driver as a module, choose M here: the module
> -+ will be called 8250_ts_ser1.
> -+
> -+config SERIAL_8250_TS_SER1_IRQ
> -+ int "Selected IRQ (5, 6 or 7)"
> -+ depends on SERIAL_8250_TS_SER1
> -+ default "5"
> -+ help
> -+ Enter jumper IRQ configuration
> -+
> - comment "Non-8250 serial port support"
> -
> - config SERIAL_AMBA_PL010
> -diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> -index 1ca4fd5..e379ab4 100644
> ---- a/drivers/serial/Makefile
> -+++ b/drivers/serial/Makefile
> -@@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o
> - obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o
> - obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o
> - obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o
> -+obj-$(CONFIG_SERIAL_8250_TS_SER1) += 8250_ts_ser1.o
> - obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
> - obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
> - obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0008-ts72xx_ts_eth100.patch b/recipes/linux/linux-2.6.36/ts72xx/0008-ts72xx_ts_eth100.patch
> deleted file mode 100644
> index b2fb7d2..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0008-ts72xx_ts_eth100.patch
> +++ /dev/null
> @@ -1,278 +0,0 @@
> -From 4c63820dec1699305f30a4096a0baa550d273a87 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Fri, 18 Jun 2010 17:39:09 +0200
> -Subject: [PATCH 08/24] ts72xx_ts_eth100
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -TS-ETH100 - 10/100 Ethernet PC/104 peripheral
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/net/Kconfig | 10 ++
> - drivers/net/Makefile | 1 +
> - drivers/net/ax88796.c | 8 ++-
> - drivers/net/ax88796_ts_eth100.c | 190 +++++++++++++++++++++++++++++++++++++++
> - 4 files changed, 208 insertions(+), 1 deletions(-)
> - create mode 100644 drivers/net/ax88796_ts_eth100.c
> -
> -diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> -index 5db667c..448c823 100644
> ---- a/drivers/net/Kconfig
> -+++ b/drivers/net/Kconfig
> -@@ -248,6 +248,16 @@ config AX88796_93CX6
> - help
> - Select this if your platform comes with an external 93CX6 eeprom.
> -
> -+config AX88796_TS_ETH100
> -+ tristate "Support for TS-ETH100 (TS-72XX SBC)"
> -+ depends on AX88796 && MACH_TS72XX
> -+ help
> -+ Say Y here if you have a TS-ETH100 PC/104 peripheral.
> -+ IRQ numbers and I/O address will be configurated automatically.
> -+
> -+ To compile this driver as a module, choose M here: the module
> -+ will be called ax88796_ts_eth100.
> -+
> - config MACE
> - tristate "MACE (Power Mac ethernet) support"
> - depends on PPC_PMAC && PPC32
> -diff --git a/drivers/net/Makefile b/drivers/net/Makefile
> -index 3e8f150..eb4765b 100644
> ---- a/drivers/net/Makefile
> -+++ b/drivers/net/Makefile
> -@@ -143,6 +143,7 @@ obj-$(CONFIG_B44) += b44.o
> - obj-$(CONFIG_FORCEDETH) += forcedeth.o
> - obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
> - obj-$(CONFIG_AX88796) += ax88796.o
> -+obj-$(CONFIG_AX88796_TS_ETH100) += ax88796_ts_eth100.o
> - obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
> -
> - obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
> -diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
> -index 20e946b..33527f7 100644
> ---- a/drivers/net/ax88796.c
> -+++ b/drivers/net/ax88796.c
> -@@ -810,7 +810,9 @@ static int ax_remove(struct platform_device *_dev)
> - ax = to_ax_dev(dev);
> -
> - unregister_netdev(dev);
> -- free_irq(dev->irq, dev);
> -+ if (ax->running) { // already freed in ax_close?
> -+ free_irq(dev->irq, dev);
> -+ }
> -
> - iounmap(ei_status.mem);
> - release_resource(ax->mem);
> -@@ -936,7 +938,11 @@ static int ax_probe(struct platform_device *pdev)
> - goto exit_mem2;
> - }
> -
> -+ #if defined(CONFIG_AX88796_TS_ETH100) || defined(CONFIG_AX88796_TS_ETH100_MODULE)
> -+ ei_status.reg_offset[0x10] = ax->map2 - ei_status.mem + 0x10; /* don't know why, but +0x20 works too */
> -+ #else
> - ei_status.reg_offset[0x1f] = ax->map2 - ei_status.mem;
> -+ #endif
> - }
> -
> - /* got resources, now initialise and register device */
> -diff --git a/drivers/net/ax88796_ts_eth100.c b/drivers/net/ax88796_ts_eth100.c
> -new file mode 100644
> -index 0000000..448b3e3
> ---- /dev/null
> -+++ b/drivers/net/ax88796_ts_eth100.c
> -@@ -0,0 +1,190 @@
> -+/*
> -+ * linux/drivers/net/ax88796_ts_eth100.c
> -+ * Technologic Systems TS-ETH100 support.
> -+ *
> -+ * (c) Copyright 2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/init.h>
> -+#include <linux/platform_device.h>
> -+#include <linux/irq.h>
> -+#include <linux/io.h>
> -+#include <net/ax88796.h>
> -+#include <mach/ts72xx.h>
> -+#include <mach/gpio.h>
> -+
> -+#define TS72XX_ETH100_IO8_PHYS_BASE (TS72XX_PC104_8BIT_IO_PHYS_BASE)
> -+#define TS72XX_ETH100_IO8_SIZE (TS72XX_PC104_8BIT_IO_SIZE)
> -+#define TS72XX_ETH100_IO16_PHYS_BASE (TS72XX_PC104_16BIT_IO_PHYS_BASE)
> -+#define TS72XX_ETH100_IO16_SIZE (TS72XX_PC104_16BIT_IO_SIZE)
> -+
> -+/* Technologic systems I/O space */
> -+#define TS_ETH100_PLD_0 0x100
> -+#define TS_ETH100_PLD_1 0x110
> -+#define TS_ETH100_PLD_2 0x120
> -+#define TS_ETH100_PLD_3 0x130
> -+
> -+/* NE2000 I/O space */
> -+#define TS_ETH100_MAC_0 0x200
> -+#define TS_ETH100_MAC_1 0x240
> -+#define TS_ETH100_MAC_2 0x300
> -+#define TS_ETH100_MAC_3 0x340
> -+
> -+/* Board identifier must be 5 ; PLD revision should be 1 */
> -+#define is_eth100_present(__iomem, __offset) \
> -+ (((__raw_readb(__iomem + __offset) & 0xF) == 0x5) && \
> -+ ((__raw_readb(__iomem + __offset + 4) & 0xF) == 0x1))
> -+
> -+/* Jumpers status (SRAM control register) */
> -+#define read_irq(__iomem, __offset) \
> -+ (__raw_readb(__iomem + __offset + 8) & 0xE)
> -+
> -+
> -+static u32 offsets[0x20] = {
> -+ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
> -+ 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
> -+ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
> -+ 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F
> -+};
> -+
> -+static struct ax_plat_data ts72xx_eth100_asix_data = {
> -+ .flags = AXFLG_HAS_93CX6,
> -+ .wordlength = 2,
> -+ .dcr_val = 0x48,
> -+ .rcr_val = 0x40,
> -+ .reg_offsets = offsets,
> -+};
> -+
> -+static struct resource ts72xx_eth100_resource[] = {
> -+ [0] = {
> -+ .start = TS72XX_ETH100_IO8_PHYS_BASE,
> -+ .end = TS72XX_ETH100_IO8_PHYS_BASE + 0x40 - 1,
> -+ .flags = IORESOURCE_MEM
> -+ },
> -+ [1] = { /* 0x10 is NE_DATAPORT is 16-bit access */
> -+ .start = TS72XX_ETH100_IO16_PHYS_BASE,
> -+ .end = TS72XX_ETH100_IO16_PHYS_BASE + 0x40 - 1,
> -+ .flags = IORESOURCE_MEM
> -+ },
> -+ [2] = {
> -+ .start = IRQ_EP93XX_EXT1,
> -+ .end = IRQ_EP93XX_EXT1,
> -+ .flags = IORESOURCE_IRQ
> -+ }
> -+};
> -+
> -+static int ts_eth100_irq; // 2 [IRQ 5], 4 [IRQ 6] or 8 [IRQ 7] (jumper configuration)
> -+
> -+
> -+static void ts72xx_eth100_release(struct device *dev)
> -+{
> -+ /* nothing to do (no kfree) because we have static struct */
> -+}
> -+
> -+static struct platform_device ts72xx_eth100_device_asix = {
> -+ .name = "ax88796",
> -+ .id = 0,
> -+ .num_resources = ARRAY_SIZE(ts72xx_eth100_resource),
> -+ .resource = ts72xx_eth100_resource,
> -+ .dev = {
> -+ .platform_data = &ts72xx_eth100_asix_data,
> -+ .release = ts72xx_eth100_release,
> -+ }
> -+};
> -+
> -+static int __init ts_eth100_init(void)
> -+{
> -+ void __iomem *iomem;
> -+ struct platform_device *ethX = NULL;
> -+
> -+ iomem = ioremap(TS72XX_ETH100_IO8_PHYS_BASE, TS72XX_ETH100_IO8_SIZE);
> -+ if (iomem != NULL) {
> -+ ethX = &ts72xx_eth100_device_asix;
> -+
> -+ if (is_eth100_present(iomem, TS_ETH100_PLD_0)) {
> -+ ethX->resource[0].start += TS_ETH100_MAC_0;
> -+ ethX->resource[0].end += TS_ETH100_MAC_0;
> -+ ethX->resource[1].start += TS_ETH100_MAC_0;
> -+ ethX->resource[1].end += TS_ETH100_MAC_0;
> -+ ts_eth100_irq = read_irq(iomem, TS_ETH100_PLD_0);
> -+ } else if(is_eth100_present(iomem, TS_ETH100_PLD_1)) {
> -+ ethX->resource[0].start += TS_ETH100_MAC_1;
> -+ ethX->resource[0].end += TS_ETH100_MAC_1;
> -+ ethX->resource[1].start += TS_ETH100_MAC_1;
> -+ ethX->resource[1].end += TS_ETH100_MAC_1;
> -+ ts_eth100_irq = read_irq(iomem, TS_ETH100_PLD_1);
> -+ } else if(is_eth100_present(iomem, TS_ETH100_PLD_2)) {
> -+ ethX->resource[0].start += TS_ETH100_MAC_2;
> -+ ethX->resource[0].end += TS_ETH100_MAC_2;
> -+ ethX->resource[1].start += TS_ETH100_MAC_2;
> -+ ethX->resource[1].end += TS_ETH100_MAC_2;
> -+ ts_eth100_irq = read_irq(iomem, TS_ETH100_PLD_2);
> -+ } else if(is_eth100_present(iomem, TS_ETH100_PLD_3)) {
> -+ ethX->resource[0].start += TS_ETH100_MAC_3;
> -+ ethX->resource[0].end += TS_ETH100_MAC_3;
> -+ ethX->resource[1].start += TS_ETH100_MAC_3;
> -+ ethX->resource[1].end += TS_ETH100_MAC_3;
> -+ ts_eth100_irq = read_irq(iomem, TS_ETH100_PLD_3);
> -+ } else {
> -+ ethX = NULL;
> -+ }
> -+
> -+ /* Translate IRQ number */
> -+ if (ethX != NULL) {
> -+ int ret, irq = 0;
> -+ switch (ts_eth100_irq) {
> -+ case 0x2: /* IRQ5 */
> -+ irq = gpio_to_irq(EP93XX_GPIO_LINE_F(3));
> -+ ret = gpio_request(irq, "TS-ETH100");
> -+ if (ret < 0) {
> -+ ethX = NULL;
> -+ goto init_error;
> -+ } else {
> -+ gpio_direction_input(irq);
> -+ set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
> -+ }
> -+ break;
> -+ case 0x4: /* IRQ6 */
> -+ irq = IRQ_EP93XX_EXT1;
> -+ break;
> -+ case 0x8: /* IRQ7 */
> -+ default:
> -+ irq = IRQ_EP93XX_EXT3;
> -+ }
> -+ ethX->resource[2].start = irq;
> -+ ethX->resource[2].end = irq;
> -+ }
> -+init_error:
> -+ iounmap(iomem);
> -+ }
> -+
> -+ return ((ethX == NULL) ? -ENODEV :
> -+ platform_device_register(&ts72xx_eth100_device_asix));
> -+}
> -+
> -+
> -+static void __exit ts_eth100_exit(void)
> -+{
> -+ platform_device_unregister(&ts72xx_eth100_device_asix);
> -+ if (ts_eth100_irq == 2)
> -+ gpio_free(EP93XX_GPIO_LINE_F(3));
> -+}
> -+
> -+module_init(ts_eth100_init);
> -+module_exit(ts_eth100_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("Asix 88796 ethernet probe module for TS-ETH100 (TS-72xx)");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION("0.21");
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0009-ts72xx_pata.patch b/recipes/linux/linux-2.6.36/ts72xx/0009-ts72xx_pata.patch
> deleted file mode 100644
> index fb891d0..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0009-ts72xx_pata.patch
> +++ /dev/null
> @@ -1,437 +0,0 @@
> -From dca6d3223e20806a2ec22704a6909d72c9ba3ef5 Mon Sep 17 00:00:00 2001
> -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz at true.cz>
> -Date: Sat, 23 Oct 2010 19:08:37 +0200
> -Subject: [PATCH 09/24] ts72xx_pata
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Support:
> -TS-7200 - Compact flash
> -TS-9600 - IDE interface PC/104 peripheral
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/ata/Kconfig | 20 +++++
> - drivers/ata/Makefile | 3 +
> - drivers/ata/pata_ts7200_cf.c | 92 ++++++++++++++++++++++++
> - drivers/ata/pata_ts72xx.c | 161 ++++++++++++++++++++++++++++++++++++++++++
> - drivers/ata/pata_ts9600.c | 95 +++++++++++++++++++++++++
> - 5 files changed, 371 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/ata/pata_ts7200_cf.c
> - create mode 100644 drivers/ata/pata_ts72xx.c
> - create mode 100644 drivers/ata/pata_ts9600.c
> -
> -diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> -index 11ec911..6c84389 100644
> ---- a/drivers/ata/Kconfig
> -+++ b/drivers/ata/Kconfig
> -@@ -862,5 +862,25 @@ config PATA_LEGACY
> -
> - If unsure, say N.
> -
> -+config PATA_TS72XX
> -+ bool "TS72XX ATA support"
> -+ depends on ARCH_EP93XX && MACH_TS72XX
> -+ help
> -+ This option enables support for ATA devices on Technologic Systems SBC.
> -+
> -+config PATA_TS7200_CF
> -+ tristate "TS-7200 Compact Flash support"
> -+ depends on PATA_TS72XX
> -+ help
> -+ This option enables support for the compact flash control on
> -+ Technologic System TS-7200 SBC.
> -+
> -+config PATA_TS9600
> -+ tristate "TS-9600 IDE interface support"
> -+ depends on PATA_TS72XX && BLK_DEV_IDE_TS9600 != y
> -+ help
> -+ This option enables support for Technologic Systems TS-9600 PC/104 IDE interface.
> -+
> - endif # ATA_SFF
> -+
> - endif # ATA
> -diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
> -index d5df04a..eb36415 100644
> ---- a/drivers/ata/Makefile
> -+++ b/drivers/ata/Makefile
> -@@ -91,6 +91,9 @@ obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
> - obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
> -
> - obj-$(CONFIG_PATA_PXA) += pata_pxa.o
> -+obj-$(CONFIG_PATA_TS72XX) += pata_ts72xx.o
> -+obj-$(CONFIG_PATA_TS7200_CF) += pata_ts7200_cf.o
> -+obj-$(CONFIG_PATA_TS9600) += pata_ts9600.o
> -
> - # Should be last but two libata driver
> - obj-$(CONFIG_PATA_ACPI) += pata_acpi.o
> -diff --git a/drivers/ata/pata_ts7200_cf.c b/drivers/ata/pata_ts7200_cf.c
> -new file mode 100644
> -index 0000000..4126682
> ---- /dev/null
> -+++ b/drivers/ata/pata_ts7200_cf.c
> -@@ -0,0 +1,92 @@
> -+/*
> -+ * Technologic Systems TS-7200 Compact Flash PATA device driver.
> -+ *
> -+ * (c) Copyright 2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+#include <linux/libata.h>
> -+#include <scsi/scsi_host.h>
> -+#include <linux/platform_device.h>
> -+#include <linux/dma-mapping.h>
> -+
> -+#include <asm/io.h>
> -+#include <asm/irq.h>
> -+#include <mach/ts72xx.h>
> -+
> -+#define DRV_NAME "pata_ts7200_cf"
> -+#define DRV_VERSION "0.21"
> -+
> -+
> -+static void pata_ts7200_cf_release(struct device *dev)
> -+{
> -+ /* nothing to do (no kfree) because we have static struct */
> -+}
> -+
> -+static struct resource ts7200_cf_resources[] = {
> -+ [0] = {
> -+ .start = TS7200_CF_CMD_PHYS_BASE,
> -+ .end = TS7200_CF_CMD_PHYS_BASE + 8,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [1] = {
> -+ .start = TS7200_CF_AUX_PHYS_BASE,
> -+ .end = TS7200_CF_AUX_PHYS_BASE + 1,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [2] = {
> -+ .start = TS7200_CF_DATA_PHYS_BASE,
> -+ .end = TS7200_CF_DATA_PHYS_BASE + 2,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [3] = {
> -+ .start = IRQ_EP93XX_EXT0, /* pin 103 of EP9301 */
> -+ .end = IRQ_EP93XX_EXT0,
> -+ .flags = IORESOURCE_IRQ,
> -+ }
> -+};
> -+
> -+
> -+static struct platform_device ts7200_cf_device = {
> -+ .name = "ts72xx-ide",
> -+ .id = 0,
> -+ .dev = {
> -+ .dma_mask = &ts7200_cf_device.dev.coherent_dma_mask,
> -+ .coherent_dma_mask = DMA_BIT_MASK(32),
> -+ .release = pata_ts7200_cf_release,
> -+ },
> -+ .num_resources = ARRAY_SIZE(ts7200_cf_resources),
> -+ .resource = ts7200_cf_resources,
> -+};
> -+
> -+
> -+static __init int pata_ts7200_cf_init(void)
> -+{
> -+ return (board_is_ts7200()) ? \
> -+ platform_device_register(&ts7200_cf_device) : -ENODEV;
> -+}
> -+
> -+static __exit void pata_ts7200_cf_exit(void)
> -+{
> -+ platform_device_unregister(&ts7200_cf_device);
> -+}
> -+
> -+module_init(pata_ts7200_cf_init);
> -+module_exit(pata_ts7200_cf_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("TS-7200 CF PATA device driver");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION(DRV_VERSION);
> -diff --git a/drivers/ata/pata_ts72xx.c b/drivers/ata/pata_ts72xx.c
> -new file mode 100644
> -index 0000000..d540029
> ---- /dev/null
> -+++ b/drivers/ata/pata_ts72xx.c
> -@@ -0,0 +1,161 @@
> -+/*
> -+ * TS-72XX PATA driver for Technologic Systems boards.
> -+ *
> -+ * Based on pata_platform.c by Paul Mundt &
> -+ * Alessandro Zummo <a.zummo at towertech.it>
> -+ * and old pata-ts72xx.c by Alessandro Zummo <a.zummo at towertech.it>
> -+ *
> -+ * (c) Copyright 2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+#include <linux/platform_device.h>
> -+#include <linux/interrupt.h>
> -+#include <scsi/scsi_host.h>
> -+#include <linux/ata.h>
> -+#include <linux/libata.h>
> -+
> -+#define DRV_NAME "pata_ts72xx"
> -+#define DRV_VERSION "2.01"
> -+
> -+
> -+/*
> -+ * Provide our own set_mode() as we don't want to change anything that has
> -+ * already been configured..
> -+ */
> -+static int ts72xx_set_mode(struct ata_link *link, struct ata_device **unused)
> -+{
> -+ struct ata_device *dev;
> -+
> -+ ata_for_each_dev(dev, link, ENABLED) {
> -+ if (ata_dev_enabled(dev)) {
> -+ /* We don't really care */
> -+ dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
> -+ dev->xfer_shift = ATA_SHIFT_PIO;
> -+ dev->flags |= ATA_DFLAG_PIO;
> -+ ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
> -+ }
> -+ }
> -+ return 0;
> -+}
> -+
> -+static struct scsi_host_template ts72xx_sht = {
> -+ ATA_PIO_SHT(DRV_NAME),
> -+};
> -+
> -+static struct ata_port_operations ts72xx_port_ops = {
> -+ .inherits = &ata_sff_port_ops,
> -+ .set_mode = ts72xx_set_mode,
> -+};
> -+
> -+static __devinit int ts72xx_pata_probe(struct platform_device *pdev)
> -+{
> -+ struct ata_host *host;
> -+ struct ata_port *ap;
> -+ int irq;
> -+
> -+ struct resource *pata_cmd = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -+ struct resource *pata_aux = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> -+ struct resource *pata_data = platform_get_resource(pdev, IORESOURCE_MEM, 2);
> -+
> -+ if (!pata_cmd || !pata_aux || !pata_data) {
> -+ dev_err(&pdev->dev, "missing resource(s)\n");
> -+ return -EINVAL;
> -+ }
> -+
> -+ irq = platform_get_irq(pdev, 0);
> -+ if (irq < 0)
> -+ irq = 0; /* no irq */
> -+
> -+ /*
> -+ * Now that that's out of the way, wire up the port
> -+ */
> -+ host = ata_host_alloc(&pdev->dev, 1);
> -+ if (!host)
> -+ return -ENOMEM;
> -+ ap = host->ports[0];
> -+
> -+ ap->ops = &ts72xx_port_ops;
> -+ ap->pio_mask = 0x1f; /* PIO0-4 */
> -+ ap->flags |= ATA_FLAG_SLAVE_POSS;
> -+
> -+ /*
> -+ * Use polling mode if there's no IRQ
> -+ */
> -+ if (!irq) {
> -+ ap->flags |= ATA_FLAG_PIO_POLLING;
> -+ ata_port_desc(ap, "no IRQ, using PIO polling");
> -+ }
> -+
> -+ ap->ioaddr.cmd_addr = devm_ioremap(&pdev->dev, pata_cmd->start,
> -+ pata_cmd->end - pata_cmd->start + 1);
> -+ ap->ioaddr.ctl_addr = devm_ioremap(&pdev->dev, pata_aux->start,
> -+ pata_aux->end - pata_aux->start + 1);
> -+
> -+ if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
> -+ dev_err(&pdev->dev, "failed to map IO/CTL base\n");
> -+ return -ENOMEM;
> -+ }
> -+
> -+ ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
> -+
> -+ ata_sff_std_ports(&ap->ioaddr);
> -+ ap->ioaddr.data_addr = devm_ioremap(&pdev->dev, pata_data->start,
> -+ pata_data->end - pata_data->start + 1);
> -+
> -+ ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
> -+ (unsigned long long)pata_cmd->start,
> -+ (unsigned long long)pata_aux->start);
> -+
> -+ return ata_host_activate(host, irq, irq ? ata_sff_interrupt : NULL,
> -+ 0 /* irq flags */, &ts72xx_sht);
> -+}
> -+
> -+static __devexit int ts72xx_pata_remove(struct platform_device *pdev)
> -+{
> -+ struct device *dev = &pdev->dev;
> -+ struct ata_host *host = dev_get_drvdata(dev);
> -+
> -+ ata_host_detach(host);
> -+
> -+ return 0;
> -+}
> -+
> -+static struct platform_driver ts72xx_pata_platform_driver = {
> -+ .probe = ts72xx_pata_probe,
> -+ .remove = __devexit_p(ts72xx_pata_remove),
> -+ .driver = {
> -+ .name = "ts72xx-ide",
> -+ .owner = THIS_MODULE,
> -+ },
> -+};
> -+
> -+static int __init ts72xx_pata_init(void)
> -+{
> -+ return platform_driver_register(&ts72xx_pata_platform_driver);
> -+}
> -+
> -+static void __exit ts72xx_pata_exit(void)
> -+{
> -+ platform_driver_unregister(&ts72xx_pata_platform_driver);
> -+}
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("low-level driver for TS-72xx device PATA");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION(DRV_VERSION);
> -+
> -+module_init(ts72xx_pata_init);
> -+module_exit(ts72xx_pata_exit);
> -diff --git a/drivers/ata/pata_ts9600.c b/drivers/ata/pata_ts9600.c
> -new file mode 100644
> -index 0000000..7a70550
> ---- /dev/null
> -+++ b/drivers/ata/pata_ts9600.c
> -@@ -0,0 +1,95 @@
> -+/*
> -+ * Technologic Systems TS-9600 PATA device driver.
> -+ *
> -+ * (c) Copyright 2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+#include <linux/libata.h>
> -+#include <scsi/scsi_host.h>
> -+#include <linux/platform_device.h>
> -+#include <linux/dma-mapping.h>
> -+
> -+#include <asm/io.h>
> -+#include <asm/irq.h>
> -+#include <mach/ts72xx.h>
> -+
> -+#define DRV_NAME "pata_ts9600"
> -+#define DRV_VERSION "0.21"
> -+
> -+#define TS9600_IDE_IO (TS72XX_PC104_8BIT_IO_PHYS_BASE + 0x1F0)
> -+#define TS9600_IDE_DATA (TS72XX_PC104_16BIT_IO_PHYS_BASE + 0x1F0)
> -+#define TS9600_IDE_IRQ IRQ_EP93XX_EXT3 // IRQ7 (no other possibility for arm)
> -+
> -+
> -+static void pata_ts9600_release(struct device *dev)
> -+{
> -+ /* nothing to do (no kfree) because we have static struct */
> -+}
> -+
> -+static struct resource ts9600_resources[] = {
> -+ [0] = {
> -+ .start = TS9600_IDE_IO,
> -+ .end = TS9600_IDE_IO + 8,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [1] = {
> -+ .start = TS9600_IDE_IO + 0x206,
> -+ .end = TS9600_IDE_IO + 0x206 + 1,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [2] = {
> -+ .start = TS9600_IDE_DATA,
> -+ .end = TS9600_IDE_DATA + 2,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [3] = {
> -+ .start = TS9600_IDE_IRQ,
> -+ .end = TS9600_IDE_IRQ,
> -+ .flags = IORESOURCE_IRQ,
> -+ }
> -+};
> -+
> -+
> -+static struct platform_device ts9600_device = {
> -+ .name = "ts72xx-ide",
> -+ .id = 9600,
> -+ .dev = {
> -+ .dma_mask = &ts9600_device.dev.coherent_dma_mask,
> -+ .coherent_dma_mask = DMA_BIT_MASK(32),
> -+ .release = pata_ts9600_release,
> -+ },
> -+ .num_resources = ARRAY_SIZE(ts9600_resources),
> -+ .resource = ts9600_resources,
> -+};
> -+
> -+
> -+static __init int pata_ts9600_init(void)
> -+{
> -+ return platform_device_register(&ts9600_device);
> -+}
> -+
> -+static __exit void pata_ts9600_exit(void)
> -+{
> -+ platform_device_unregister(&ts9600_device);
> -+}
> -+
> -+module_init(pata_ts9600_init);
> -+module_exit(pata_ts9600_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("TS-9600 PATA device driver");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION(DRV_VERSION);
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0010-ts72xx_gpio_i2c.patch b/recipes/linux/linux-2.6.36/ts72xx/0010-ts72xx_gpio_i2c.patch
> deleted file mode 100644
> index 7dee3af..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0010-ts72xx_gpio_i2c.patch
> +++ /dev/null
> @@ -1,63 +0,0 @@
> -From 675ef8ec55abd042e7d725bb5a7963ac6e715acb Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Sat, 19 Jun 2010 11:45:39 +0200
> -Subject: [PATCH 10/24] ts72xx_gpio_i2c
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/ts72xx.c | 22 ++++++++++++++++++++++
> - 1 files changed, 22 insertions(+), 0 deletions(-)
> -
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index 345ce18..e8a2489 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -19,6 +19,10 @@
> - #include <linux/m48t86.h>
> - #include <linux/mtd/nand.h>
> - #include <linux/mtd/partitions.h>
> -+#include <linux/mtd/physmap.h>
> -+#include <linux/gpio.h>
> -+#include <linux/i2c.h>
> -+#include <linux/i2c-gpio.h>
> -
> - #include <mach/hardware.h>
> - #include <mach/ts72xx.h>
> -@@ -279,6 +283,21 @@ static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
> - .phy_id = 1,
> - };
> -
> -+/*************************************************************************
> -+ * I2C (make access through TS-72XX "DIO" 2x8 header)
> -+ *************************************************************************/
> -+static struct i2c_gpio_platform_data ts72xx_i2c_gpio_data = {
> -+ .sda_pin = EP93XX_GPIO_LINE_EGPIO14, // DIO_6
> -+ .sda_is_open_drain = 0,
> -+ .scl_pin = EP93XX_GPIO_LINE_EGPIO15, // DIO_7
> -+ .scl_is_open_drain = 0,
> -+ .udelay = 0, /* default is 100 kHz */
> -+ .timeout = 0, /* default is 100 ms */
> -+};
> -+
> -+static struct i2c_board_info __initdata ts72xx_i2c_board_info[] = {
> -+};
> -+
> - static void __init ts72xx_init_machine(void)
> - {
> - ep93xx_init_devices();
> -@@ -287,6 +306,9 @@ static void __init ts72xx_init_machine(void)
> - platform_device_register(&ts72xx_wdt_device);
> -
> - ep93xx_register_eth(&ts72xx_eth_data, 1);
> -+ ep93xx_register_i2c(&ts72xx_i2c_gpio_data,
> -+ ts72xx_i2c_board_info,
> -+ ARRAY_SIZE(ts72xx_i2c_board_info));
> -
> - /* PWM1 is DIO_6 on TS-72xx header */
> - ep93xx_register_pwm(0, 1);
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0011-ts72xx_dio_keypad.patch b/recipes/linux/linux-2.6.36/ts72xx/0011-ts72xx_dio_keypad.patch
> deleted file mode 100644
> index df0924e..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0011-ts72xx_dio_keypad.patch
> +++ /dev/null
> @@ -1,311 +0,0 @@
> -From 75385f54792d2ed6dc59005972cf54dbedea9897 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Sat, 19 Jun 2010 14:44:32 +0200
> -Subject: [PATCH 11/24] ts72xx_dio_keypad
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Depends of "matrix-keypad" driver.
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/input/keyboard/Kconfig | 30 ++++++++
> - drivers/input/keyboard/Makefile | 2 +
> - drivers/input/keyboard/ts72xx_dio_3x4.c | 110 +++++++++++++++++++++++++++++
> - drivers/input/keyboard/ts72xx_dio_4x4.c | 115 +++++++++++++++++++++++++++++++
> - 4 files changed, 257 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/input/keyboard/ts72xx_dio_3x4.c
> - create mode 100644 drivers/input/keyboard/ts72xx_dio_4x4.c
> -
> -diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> -index 9cc488d..81860f4 100644
> ---- a/drivers/input/keyboard/Kconfig
> -+++ b/drivers/input/keyboard/Kconfig
> -@@ -204,6 +204,36 @@ config KEYBOARD_MATRIX
> - To compile this driver as a module, choose M here: the
> - module will be called matrix_keypad.
> -
> -+if KEYBOARD_MATRIX
> -+
> -+choice
> -+ prompt "Keypad type"
> -+ default TS72XX_DIO_4X4_KEYPAD
> -+
> -+config TS72XX_DIO_3X4_KEYPAD
> -+ tristate "TS-72xx 3x4 matrix keypad"
> -+ depends on MACH_TS72XX
> -+ help
> -+ This a 12 keys (4 rows, 3 cols using DIO_0-6) keypad with the following layout:
> -+ 1 2 3
> -+ 4 5 6
> -+ 7 8 9
> -+ * 0 #
> -+
> -+config TS72XX_DIO_4X4_KEYPAD
> -+ tristate "TS-72xx 4x4 matrix keypad"
> -+ depends on MACH_TS72XX
> -+ help
> -+ This a 16 keys (4 rows, 4 cols using DIO_0-7) keypad with the following layout:
> -+ 7 8 9 F
> -+ 4 5 6 E
> -+ 1 2 3 D
> -+ A 0 B C
> -+
> -+endchoice
> -+
> -+endif # KEYBOARD_MATRIX
> -+
> - config KEYBOARD_HIL_OLD
> - tristate "HP HIL keyboard support (simple driver)"
> - depends on GSC || HP300
> -diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> -index 504b591..cb18981 100644
> ---- a/drivers/input/keyboard/Makefile
> -+++ b/drivers/input/keyboard/Makefile
> -@@ -41,3 +41,5 @@ obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
> - obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
> - obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
> - obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
> -+obj-$(CONFIG_TS72XX_DIO_3X4_KEYPAD) += ts72xx_dio_3x4.o
> -+obj-$(CONFIG_TS72XX_DIO_4X4_KEYPAD) += ts72xx_dio_4x4.o
> -diff --git a/drivers/input/keyboard/ts72xx_dio_3x4.c b/drivers/input/keyboard/ts72xx_dio_3x4.c
> -new file mode 100644
> -index 0000000..e214335
> ---- /dev/null
> -+++ b/drivers/input/keyboard/ts72xx_dio_3x4.c
> -@@ -0,0 +1,110 @@
> -+/*
> -+ * TS-72xx (3x4) keypad device driver for DIO1 header (DIO_0 thru DIO_6)
> -+ *
> -+ * (c) Copyright 2010 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <linux/platform_device.h>
> -+#include <linux/input/matrix_keypad.h>
> -+#include <mach/gpio.h>
> -+
> -+static const uint32_t ts72xx_kbd_keymap[] = {
> -+ KEY(0, 0, KEY_1),
> -+ KEY(0, 1, KEY_2),
> -+ KEY(0, 2, KEY_3),
> -+
> -+ KEY(1, 0, KEY_4),
> -+ KEY(1, 1, KEY_5),
> -+ KEY(1, 2, KEY_6),
> -+
> -+ KEY(2, 0, KEY_7),
> -+ KEY(2, 1, KEY_8),
> -+ KEY(2, 2, KEY_9),
> -+
> -+ KEY(3, 0, KEY_KPASTERISK),
> -+ KEY(3, 1, KEY_0),
> -+ KEY(3, 2, KEY_ENTER),
> -+};
> -+
> -+static struct matrix_keymap_data ts72xx_kbd_keymap_data = {
> -+ .keymap = ts72xx_kbd_keymap,
> -+ .keymap_size = ARRAY_SIZE(ts72xx_kbd_keymap),
> -+};
> -+
> -+static const int ts72xx_kbd_row_gpios[] = {
> -+ EP93XX_GPIO_LINE_EGPIO14, // DIO_6 (row0)
> -+ EP93XX_GPIO_LINE_EGPIO13,
> -+ EP93XX_GPIO_LINE_EGPIO12,
> -+ EP93XX_GPIO_LINE_EGPIO11,
> -+};
> -+
> -+static const int ts72xx_kbd_col_gpios[] = {
> -+ EP93XX_GPIO_LINE_EGPIO10, // DIO_2 (col0)
> -+ EP93XX_GPIO_LINE_EGPIO9,
> -+ EP93XX_GPIO_LINE_EGPIO8,
> -+};
> -+
> -+static struct matrix_keypad_platform_data ts72xx_kbd_pdata = {
> -+ .keymap_data = &ts72xx_kbd_keymap_data,
> -+ .row_gpios = ts72xx_kbd_row_gpios,
> -+ .col_gpios = ts72xx_kbd_col_gpios,
> -+ .num_row_gpios = ARRAY_SIZE(ts72xx_kbd_row_gpios),
> -+ .num_col_gpios = ARRAY_SIZE(ts72xx_kbd_col_gpios),
> -+ .col_scan_delay_us = 20,
> -+ .debounce_ms = 20,
> -+ .wakeup = 1,
> -+ .active_low = 1,
> -+ //.no_autorep = 1,
> -+};
> -+
> -+static void ts72xx_kbd_release(struct device *dev)
> -+{
> -+}
> -+
> -+static struct platform_device ts72xx_kbd_device = {
> -+ .name = "matrix-keypad",
> -+ .id = -1,
> -+ .dev = {
> -+ .platform_data = &ts72xx_kbd_pdata,
> -+ .release = ts72xx_kbd_release,
> -+ },
> -+};
> -+
> -+static int __init ts72xx_dio_init(void)
> -+{
> -+ int i;
> -+
> -+ for (i = 0; i < ARRAY_SIZE(ts72xx_kbd_row_gpios); i++) {
> -+ int irq = gpio_to_irq(ts72xx_kbd_row_gpios[i]);
> -+
> -+ ep93xx_gpio_int_debounce(irq, 1);
> -+ }
> -+
> -+ return platform_device_register(&ts72xx_kbd_device);
> -+}
> -+
> -+static void __exit ts72xx_dio_exit(void)
> -+{
> -+ platform_device_unregister(&ts72xx_kbd_device);
> -+}
> -+
> -+module_init(ts72xx_dio_init);
> -+module_exit(ts72xx_dio_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("Platform device 3x4 keypad");
> -+MODULE_LICENSE("GPL");
> -diff --git a/drivers/input/keyboard/ts72xx_dio_4x4.c b/drivers/input/keyboard/ts72xx_dio_4x4.c
> -new file mode 100644
> -index 0000000..790abd5
> ---- /dev/null
> -+++ b/drivers/input/keyboard/ts72xx_dio_4x4.c
> -@@ -0,0 +1,115 @@
> -+/*
> -+ * TS-72xx (4x4) keypad device driver for DIO1 header (DIO_0 thru DIO_7)
> -+ *
> -+ * (c) Copyright 2010 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <linux/platform_device.h>
> -+#include <linux/input/matrix_keypad.h>
> -+#include <mach/gpio.h>
> -+
> -+static const uint32_t ts72xx_kbd_keymap[] = {
> -+ KEY(0, 0, KEY_7),
> -+ KEY(0, 1, KEY_8),
> -+ KEY(0, 2, KEY_9),
> -+ KEY(0, 3, KEY_F),
> -+
> -+ KEY(1, 0, KEY_4),
> -+ KEY(1, 1, KEY_5),
> -+ KEY(1, 2, KEY_6),
> -+ KEY(1, 3, KEY_E),
> -+
> -+ KEY(2, 0, KEY_1),
> -+ KEY(2, 1, KEY_2),
> -+ KEY(2, 2, KEY_3),
> -+ KEY(2, 3, KEY_D),
> -+
> -+ KEY(3, 0, KEY_A),
> -+ KEY(3, 1, KEY_0),
> -+ KEY(3, 2, KEY_B),
> -+ KEY(3, 3, KEY_C),
> -+};
> -+
> -+static struct matrix_keymap_data ts72xx_kbd_keymap_data = {
> -+ .keymap = ts72xx_kbd_keymap,
> -+ .keymap_size = ARRAY_SIZE(ts72xx_kbd_keymap),
> -+};
> -+
> -+static const int ts72xx_kbd_row_gpios[] = {
> -+ EP93XX_GPIO_LINE_EGPIO8, // DIO_0 (row0)
> -+ EP93XX_GPIO_LINE_EGPIO9,
> -+ EP93XX_GPIO_LINE_EGPIO12,
> -+ EP93XX_GPIO_LINE_EGPIO14,
> -+};
> -+
> -+static const int ts72xx_kbd_col_gpios[] = {
> -+ EP93XX_GPIO_LINE_EGPIO15, // DIO_7 (col0)
> -+ EP93XX_GPIO_LINE_EGPIO13,
> -+ EP93XX_GPIO_LINE_EGPIO11,
> -+ EP93XX_GPIO_LINE_EGPIO10,
> -+};
> -+
> -+static struct matrix_keypad_platform_data ts72xx_kbd_pdata = {
> -+ .keymap_data = &ts72xx_kbd_keymap_data,
> -+ .row_gpios = ts72xx_kbd_row_gpios,
> -+ .col_gpios = ts72xx_kbd_col_gpios,
> -+ .num_row_gpios = ARRAY_SIZE(ts72xx_kbd_row_gpios),
> -+ .num_col_gpios = ARRAY_SIZE(ts72xx_kbd_col_gpios),
> -+ .col_scan_delay_us = 20,
> -+ .debounce_ms = 20,
> -+ .wakeup = 1,
> -+ .active_low = 1,
> -+ //.no_autorep = 1,
> -+};
> -+
> -+static void ts72xx_kbd_release(struct device *dev)
> -+{
> -+}
> -+
> -+static struct platform_device ts72xx_kbd_device = {
> -+ .name = "matrix-keypad",
> -+ .id = -1,
> -+ .dev = {
> -+ .platform_data = &ts72xx_kbd_pdata,
> -+ .release = ts72xx_kbd_release,
> -+ },
> -+};
> -+
> -+static int __init ts72xx_dio_init(void)
> -+{
> -+ int i;
> -+
> -+ for (i = 0; i < ARRAY_SIZE(ts72xx_kbd_row_gpios); i++) {
> -+ int irq = gpio_to_irq(ts72xx_kbd_row_gpios[i]);
> -+
> -+ ep93xx_gpio_int_debounce(irq, 1);
> -+ }
> -+
> -+ return platform_device_register(&ts72xx_kbd_device);
> -+}
> -+
> -+static void __exit ts72xx_dio_exit(void)
> -+{
> -+ platform_device_unregister(&ts72xx_kbd_device);
> -+}
> -+
> -+module_init(ts72xx_dio_init);
> -+module_exit(ts72xx_dio_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("Platform device 4x4 keypad");
> -+MODULE_LICENSE("GPL");
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0012-ts72xx_sbcinfo.patch b/recipes/linux/linux-2.6.36/ts72xx/0012-ts72xx_sbcinfo.patch
> deleted file mode 100644
> index f744a66..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0012-ts72xx_sbcinfo.patch
> +++ /dev/null
> @@ -1,267 +0,0 @@
> -From c4f068cc743be6e79c333a0de38e1cef91e05786 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Sat, 19 Jun 2010 15:08:58 +0200
> -Subject: [PATCH 12/24] ts72xx_sbcinfo
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/Kconfig | 7 +
> - arch/arm/mach-ep93xx/Makefile | 1 +
> - arch/arm/mach-ep93xx/ts72xx.c | 5 +
> - arch/arm/mach-ep93xx/ts72xx_sbcinfo.c | 198 +++++++++++++++++++++++++++++++++
> - 4 files changed, 211 insertions(+), 0 deletions(-)
> - create mode 100644 arch/arm/mach-ep93xx/ts72xx_sbcinfo.c
> -
> -diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> -index bd463a0..2bfb01e 100644
> ---- a/arch/arm/mach-ep93xx/Kconfig
> -+++ b/arch/arm/mach-ep93xx/Kconfig
> -@@ -212,6 +212,13 @@ config MACH_TS72XX_FORCE_MACHINEID
> - Say 'Y' here to force Machine ID to 0x2A1 (MACH_TYPE_TS72XX legacy value)
> - In early days Technologic Systems fixed the 0x163 value in redboot.
> -
> -+config MACH_TS72XX_SBCINFO
> -+ tristate "Add procfs /proc/driver/sbcinfo"
> -+ depends on MACH_TS72XX
> -+ help
> -+ Say 'Y' to add a procfs entry containing some information
> -+ related to Technologic Systems TS-72xx SBC.
> -+
> - endmenu
> -
> - endif
> -diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
> -index ea652c2..c38d1e2 100644
> ---- a/arch/arm/mach-ep93xx/Makefile
> -+++ b/arch/arm/mach-ep93xx/Makefile
> -@@ -13,3 +13,4 @@ obj-$(CONFIG_MACH_MICRO9) += micro9.o
> - obj-$(CONFIG_MACH_SIM_ONE) += simone.o
> - obj-$(CONFIG_MACH_SNAPPER_CL15) += snappercl15.o
> - obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
> -+obj-$(CONFIG_MACH_TS72XX_SBCINFO) += ts72xx_sbcinfo.o
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index e8a2489..9b707a5 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -39,6 +39,11 @@ static struct map_desc ts72xx_io_desc[] __initdata = {
> - .length = TS72XX_MODEL_SIZE,
> - .type = MT_DEVICE,
> - }, {
> -+ .virtual = TS72XX_PLD_VERSION_VIRT_BASE,
> -+ .pfn = __phys_to_pfn(TS72XX_PLD_VERSION_PHYS_BASE),
> -+ .length = TS72XX_PLD_VERSION_SIZE,
> -+ .type = MT_DEVICE,
> -+ }, {
> - .virtual = TS72XX_OPTIONS_VIRT_BASE,
> - .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
> - .length = TS72XX_OPTIONS_SIZE,
> -diff --git a/arch/arm/mach-ep93xx/ts72xx_sbcinfo.c b/arch/arm/mach-ep93xx/ts72xx_sbcinfo.c
> -new file mode 100644
> -index 0000000..cbb485f
> ---- /dev/null
> -+++ b/arch/arm/mach-ep93xx/ts72xx_sbcinfo.c
> -@@ -0,0 +1,198 @@
> -+/*
> -+ * Technologic Systems TS-72XX sbc /proc/driver/sbcinfo entry.
> -+ *
> -+ * Original idea by Liberty Young (Technologic Systems).
> -+ *
> -+ * (c) Copyright 2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or
> -+ * modify it under the terms of the GNU General Public License
> -+ * as published by the Free Software Foundation; either version
> -+ * 2 of the License, or (at your option) any later version.
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <linux/io.h>
> -+#include <linux/proc_fs.h>
> -+#include <mach/hardware.h>
> -+#include <mach/ts72xx.h>
> -+
> -+struct infos {
> -+ const char *cpu_rev;
> -+ int model, pld, wdt;
> -+ int option_ad;
> -+ int option_rs485;
> -+ unsigned char jumpers[6]; // 0=off,1=on,2=error
> -+
> -+ /* Power management : TS-7260 only */
> -+ int pm;
> -+};
> -+
> -+static const char *revisions[] = { "A", "B", "C", "D0", "D1", "E0", "E1", "E2", "??" };
> -+
> -+
> -+static void get_sbcinfo(struct infos *data)
> -+{
> -+ void __iomem *p;
> -+ short rev;
> -+
> -+ /* CPU revision */
> -+ rev = __raw_readl(EP93XX_SYSCON_CHIPID) >> 28;
> -+ if (rev > ARRAY_SIZE(revisions))
> -+ rev = ARRAY_SIZE(revisions) - 1;
> -+ data->cpu_rev = revisions[rev];
> -+
> -+ /* Board model */
> -+ if (board_is_ts7200())
> -+ data->model = 7200;
> -+ else if (board_is_ts7250())
> -+ data->model = 7250;
> -+ else if (board_is_ts7260())
> -+ data->model = 7260;
> -+ else if (board_is_ts7400())
> -+ data->model = 7400;
> -+ else
> -+ data->model = 0;
> -+
> -+ data->pld = get_ts72xx_pld_version();
> -+
> -+ /* A/D converter (8 x 12-bit channels) */
> -+ if (data->model == 7200 || data->model == 7250) {
> -+ data->option_ad = is_max197_installed();
> -+ } else {
> -+ data->option_ad = 0;
> -+ }
> -+
> -+ /* COM2 RS-485 */
> -+ if (is_rs485_installed()) {
> -+ data->option_rs485 = 1;
> -+ } else {
> -+ data->option_rs485 = 0;
> -+ }
> -+
> -+ /* jumpers */
> -+ p = ioremap(TS72XX_JUMPERS_MAX197_PHYS_BASE, SZ_4K - 1);
> -+ if (p) {
> -+ unsigned char c = __raw_readb(p);
> -+
> -+ data->jumpers[0] = 2; // JP1 (bootstrap)
> -+ data->jumpers[1] = !!(c & 0x01); // JP2 (enable serial console)
> -+ data->jumpers[2] = !!(c & 0x02); // JP3 (flash write enable)
> -+ data->jumpers[3] = !(c & 0x08); // JP4 (console on COM2)
> -+ data->jumpers[4] = !(c & 0x10); // JP5 (test)
> -+ data->jumpers[5] = !!(is_jp6_set()); // JP6 (user jumper)
> -+
> -+ iounmap(p);
> -+ } else {
> -+ data->jumpers[0] = data->jumpers[1] = data->jumpers[2] = 2;
> -+ data->jumpers[3] = data->jumpers[4] = data->jumpers[5] = 2;
> -+ }
> -+
> -+ /* cpld watchdog */
> -+ p = ioremap(TS72XX_WDT_CONTROL_PHYS_BASE, SZ_4K - 1);
> -+ if (p) {
> -+ data->wdt = __raw_readb(p) & 0x7;
> -+ iounmap(p);
> -+ } else {
> -+ data->wdt = 8;
> -+ }
> -+
> -+ /* power management */
> -+ data->pm = -1;
> -+ if (data->model == 7260) {
> -+ p = ioremap(TS7260_POWER_MANAGEMENT_PHYS_BASE, SZ_4K - 1);
> -+ if (p) {
> -+ data->pm = __raw_readb(p);
> -+ iounmap(p);
> -+ }
> -+ }
> -+}
> -+
> -+static char *get_pm_string(int reg, char *buffer, size_t size)
> -+{
> -+ static const char *pm_state = "rs232=%d usb=%d lcd=%d pc104=%d ttl=%d";
> -+
> -+ if (reg < 0) {
> -+ strncpy(buffer, "n/a", size);
> -+ } else {
> -+ /* 1 means on/enabled */
> -+ snprintf(buffer, size, pm_state,
> -+ reg & TS7260_PM_RS232_LEVEL_CONVERTER,
> -+ !!(reg & TS7260_PM_USB),
> -+ !!(reg & TS7260_PM_LCD),
> -+ !(reg & TS7260_PM_PC104_CLOCK),
> -+ !!(reg & TS7260_PM_TTL_UART_ENABLE));
> -+ }
> -+ return buffer;
> -+}
> -+
> -+static int ts72xx_sbcinfo_read_proc(char *buffer, char **start, off_t offset,
> -+ int count, int *eof, void *data)
> -+{
> -+ int len, size = count;
> -+ char *p = buffer;
> -+ char temp[64];
> -+ struct infos nfo;
> -+
> -+ static const char jpc[3] = { 'n', 'y', '?' };
> -+ static const char *wdt[9] = { "disabled", "250ms", "500ms", "1s", "reserved", "2s", "4s", "8s", "n/a" };
> -+
> -+ get_sbcinfo(&nfo);
> -+ len = scnprintf(p, size,
> -+ "Model : TS-%d (CPU rev %s) (PLD rev %c)\n"
> -+ "Option max197 A/D : %s\n"
> -+ "Option RS-485 : %s\n"
> -+ "Jumpers : JP2=%c JP3=%c JP4=%c JP5=%c JP6=%c\n"
> -+ "CPLD Watchdog : %s\n"
> -+ "Power management : %s\n",
> -+ nfo.model, nfo.cpu_rev, nfo.pld + 0x40,
> -+ (nfo.option_ad ? "yes" : "no"),
> -+ (nfo.option_rs485 ? "yes" : "no"),
> -+ jpc[nfo.jumpers[1]], jpc[nfo.jumpers[2]], jpc[nfo.jumpers[3]], jpc[nfo.jumpers[4]],
> -+ jpc[nfo.jumpers[5]], wdt[nfo.wdt],
> -+ get_pm_string(nfo.pm, &temp[0], sizeof(temp)));
> -+
> -+ if (len <= offset + count)
> -+ *eof = 1;
> -+
> -+ *start = buffer + offset;
> -+ len -= offset;
> -+
> -+ if (len > count)
> -+ len = count;
> -+ if (len < 0)
> -+ len = 0;
> -+
> -+ return len;
> -+}
> -+
> -+static int __init ts72xx_sbcinfo_init(void)
> -+{
> -+ struct proc_dir_entry *entry;
> -+ int ret = 0;
> -+
> -+ entry = create_proc_read_entry("driver/sbcinfo", 0,
> -+ NULL, ts72xx_sbcinfo_read_proc, NULL);
> -+
> -+ if (!entry) {
> -+ printk(KERN_ERR "sbcinfo: can't create /proc/driver/sbcinfo\n");
> -+ ret = -ENOMEM;
> -+ }
> -+
> -+ return ret;
> -+}
> -+
> -+static void __exit ts72xx_sbcinfo_exit(void)
> -+{
> -+ remove_proc_entry("driver/sbcinfo", NULL);
> -+}
> -+
> -+module_init(ts72xx_sbcinfo_init);
> -+module_exit(ts72xx_sbcinfo_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("Show information of Technologic Systems TS-72XX sbc");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION("1.04");
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0013-ts72xx_max197.patch b/recipes/linux/linux-2.6.36/ts72xx/0013-ts72xx_max197.patch
> deleted file mode 100644
> index 6837e55..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0013-ts72xx_max197.patch
> +++ /dev/null
> @@ -1,356 +0,0 @@
> -From 4d67c12c77e2095db542e84a78086cb1be02ff71 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Sat, 19 Jun 2010 15:49:34 +0200
> -Subject: [PATCH 13/24] ts72xx_max197
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/ts72xx.c | 32 ++++++-
> - drivers/misc/Kconfig | 21 ++++
> - drivers/misc/Makefile | 1 +
> - drivers/misc/ts72xx_max197.c | 235 +++++++++++++++++++++++++++++++++++++++++
> - 4 files changed, 288 insertions(+), 1 deletions(-)
> - create mode 100644 drivers/misc/ts72xx_max197.c
> -
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index 9b707a5..96a4d54 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -281,10 +281,36 @@ static struct platform_device ts72xx_wdt_device = {
> - .resource = ts72xx_wdt_resources,
> - };
> -
> --static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
> -+/*************************************************************************
> -+ * MAX197 (8 * 12-bit A/D converter) option
> -+ *************************************************************************/
> -+static struct resource ts72xx_max197_resources[] = {
> -+ [0] = { /* sample/control register */
> -+ .start = TS72XX_MAX197_SAMPLE_PHYS_BASE,
> -+ .end = TS72XX_MAX197_SAMPLE_PHYS_BASE + SZ_4K - 1,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [1] = { /* busy bit */
> -+ .start = TS72XX_JUMPERS_MAX197_PHYS_BASE,
> -+ .end = TS72XX_JUMPERS_MAX197_PHYS_BASE + SZ_4K - 1,
> -+ .flags = IORESOURCE_MEM,
> -+ }
> -+};
> -+
> -+static struct platform_device ts72xx_max197_device = {
> -+ .name = "ts72xx-max197",
> -+ .id = -1,
> -+ .dev = {
> -+ .platform_data = NULL,
> -+ },
> -+ .num_resources = ARRAY_SIZE(ts72xx_max197_resources),
> -+ .resource = ts72xx_max197_resources,
> -+};
> -+
> - /*************************************************************************
> - * Ethernet
> - *************************************************************************/
> -+static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
> - .phy_id = 1,
> - };
> -
> -@@ -315,6 +341,10 @@ static void __init ts72xx_init_machine(void)
> - ts72xx_i2c_board_info,
> - ARRAY_SIZE(ts72xx_i2c_board_info));
> -
> -+ if (is_max197_installed()) {
> -+ platform_device_register(&ts72xx_max197_device);
> -+ }
> -+
> - /* PWM1 is DIO_6 on TS-72xx header */
> - ep93xx_register_pwm(0, 1);
> - }
> -diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> -index b743312..89026bf 100644
> ---- a/drivers/misc/Kconfig
> -+++ b/drivers/misc/Kconfig
> -@@ -395,4 +395,25 @@ source "drivers/misc/eeprom/Kconfig"
> - source "drivers/misc/cb710/Kconfig"
> - source "drivers/misc/iwmc3200top/Kconfig"
> -
> -+config TS72XX_MAX197
> -+ tristate "TS-72xx MAX197 support"
> -+ depends on ARCH_EP93XX && MACH_TS72XX && SYSFS
> -+ help
> -+ Say Y here if to include support for the MAX197 A/D converter
> -+ optionally included on Technologic Systems SBCs.
> -+ Default acquisition range is [0..5V].
> -+
> -+ To compile this driver as a module, choose M here: the
> -+ module will be called ts72xx_max197.
> -+
> -+if TS72XX_MAX197
> -+
> -+config TS72XX_MAX197_AVERAGE
> -+ bool "Average measurement"
> -+ help
> -+ Say Y here to enable making average measurement. Default is 1.
> -+ See /sys/module/ts72xx_max197/parameters/average file.
> -+
> -+endif # TS72XX_MAX197
> -+
> - endif # MISC_DEVICES
> -diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> -index 42eab95..431ef19 100644
> ---- a/drivers/misc/Makefile
> -+++ b/drivers/misc/Makefile
> -@@ -26,6 +26,7 @@ obj-$(CONFIG_HP_ILO) += hpilo.o
> - obj-$(CONFIG_ISL29003) += isl29003.o
> - obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
> - obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
> -+obj-$(CONFIG_TS72XX_MAX197) += ts72xx_max197.o
> - obj-$(CONFIG_DS1682) += ds1682.o
> - obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
> - obj-$(CONFIG_C2PORT) += c2port/
> -diff --git a/drivers/misc/ts72xx_max197.c b/drivers/misc/ts72xx_max197.c
> -new file mode 100644
> -index 0000000..4121ae5
> ---- /dev/null
> -+++ b/drivers/misc/ts72xx_max197.c
> -@@ -0,0 +1,235 @@
> -+/*
> -+ * TS-72XX max197 driver for Technologic Systems boards.
> -+ *
> -+ * Voltage conversion is taken from adc_logger from Jim Jackson.
> -+ * (c) Copyright 2008 Matthieu Crapet <mcrapet at gmail.com>
> -+ *
> -+ * This program is free software; you can redistribute it and/or
> -+ * modify it under the terms of the GNU General Public License
> -+ * as published by the Free Software Foundation; either version
> -+ * 2 of the License, or (at your option) any later version.
> -+ */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+#include <linux/platform_device.h>
> -+#include <asm/io.h>
> -+
> -+#define DRV_VERSION "0.2"
> -+#define PFX "ts72xx_max197: "
> -+
> -+#define MAX197_RANGE_5_5 1 // [- 5V + 5V]
> -+#define MAX197_RANGE_10_10 3 // [-10V +10V]
> -+#define MAX197_RANGE_0_5 0 // [ 0V + 5V]
> -+#define MAX197_RANGE_0_10 2 // [ 0V +10V]
> -+
> -+#define MAX197_RESET_CHANNEL_CONF(x) (~(3 << (2*(x))))
> -+#define MAX197_SET_CHANNEL_CONF(x, range) ((range) << (2*(x)))
> -+#define MAX197_GET_CHANNEL_CONF(x, conf) (((conf) >> (2*(x))) & 3)
> -+
> -+struct max197_config
> -+{
> -+ void __iomem *control_and_data_register;
> -+ void __iomem *busy_bit_register;
> -+ unsigned int channels; // two bits per channels
> -+};
> -+
> -+static struct max197_config conf;
> -+#ifdef CONFIG_TS72XX_MAX197_AVERAGE
> -+static ushort average = 1;
> -+#endif
> -+
> -+static ssize_t max197_acquire(struct device *dev,
> -+ struct device_attribute *attr, char *buf)
> -+{
> -+ int range, n;
> -+ signed short val;
> -+#ifdef CONFIG_TS72XX_MAX197_AVERAGE
> -+ int i, total;
> -+#endif
> -+
> -+ n = attr->attr.name[2] - 0x31;
> -+ range = MAX197_GET_CHANNEL_CONF(n, conf.channels);
> -+
> -+#ifdef CONFIG_TS72XX_MAX197_AVERAGE
> -+ val = 0; total = 0;
> -+ for (i = 0; i < average; i++) {
> -+#endif
> -+
> -+ __raw_writeb(((range << 3) | n | 0x40) & 0xFF,
> -+ conf.control_and_data_register);
> -+ while (__raw_readb(conf.busy_bit_register) & 0x80);
> -+ val = __raw_readw(conf.control_and_data_register);
> -+
> -+ //printk(PFX "%hd/%hd: 0x%04X\n", i+1, average, val);
> -+
> -+#ifdef CONFIG_TS72XX_MAX197_AVERAGE
> -+ total += val;
> -+ }
> -+ total /= average;
> -+ val = (signed short)total;
> -+#endif
> -+
> -+ /* We want three digit precision */
> -+ switch (range) {
> -+ case MAX197_RANGE_0_5:
> -+ val = ((val * 50000/4096)+5)/10;
> -+ break;
> -+ case MAX197_RANGE_5_5:
> -+ case MAX197_RANGE_0_10:
> -+ val = ((val * 100000/4096)+5)/10;
> -+ break;
> -+ case MAX197_RANGE_10_10:
> -+ val = ((val * 200000/4096)+5)/10;
> -+ break;
> -+ }
> -+
> -+ return sprintf(buf, "%d.%03ld\n", val/1000, abs(val%1000));
> -+}
> -+
> -+static ssize_t max197_configure(struct device *dev,
> -+ struct device_attribute *attr, const char *buf, size_t len)
> -+{
> -+ int n = attr->attr.name[2] - 0x31;
> -+
> -+ long val = simple_strtol(buf, NULL, 10);
> -+ switch (val) {
> -+ case 10:
> -+ conf.channels &= MAX197_RESET_CHANNEL_CONF(n);
> -+ conf.channels |= MAX197_SET_CHANNEL_CONF(n, MAX197_RANGE_0_10);
> -+ break;
> -+ case 5:
> -+ conf.channels &= MAX197_RESET_CHANNEL_CONF(n);
> -+ conf.channels |= MAX197_SET_CHANNEL_CONF(n, MAX197_RANGE_0_5);
> -+ break;
> -+ case -10:
> -+ conf.channels &= MAX197_RESET_CHANNEL_CONF(n);
> -+ conf.channels |= MAX197_SET_CHANNEL_CONF(n, MAX197_RANGE_10_10);
> -+ break;
> -+ case -5:
> -+ conf.channels &= MAX197_RESET_CHANNEL_CONF(n);
> -+ conf.channels |= MAX197_SET_CHANNEL_CONF(n, MAX197_RANGE_5_5);
> -+ break;
> -+
> -+ default:
> -+ return -EINVAL;
> -+ }
> -+
> -+ return len;
> -+}
> -+
> -+static DEVICE_ATTR(ch1, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch2, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch3, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch4, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch5, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch6, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch7, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+static DEVICE_ATTR(ch8, S_IWUSR | S_IRUGO, max197_acquire, max197_configure);
> -+
> -+static struct attribute *max197_attributes[] = {
> -+ &dev_attr_ch1.attr,
> -+ &dev_attr_ch2.attr,
> -+ &dev_attr_ch3.attr,
> -+ &dev_attr_ch4.attr,
> -+ &dev_attr_ch5.attr,
> -+ &dev_attr_ch6.attr,
> -+ &dev_attr_ch7.attr,
> -+ &dev_attr_ch8.attr,
> -+ NULL
> -+};
> -+
> -+static struct attribute_group max197_group = {
> -+ .attrs = max197_attributes,
> -+ //.name = "channels",
> -+};
> -+
> -+static __devinit int ts72xx_max197_probe(struct platform_device *pdev)
> -+{
> -+ int err = 0;
> -+ struct resource *r_data, *r_busy;
> -+
> -+ r_data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -+ r_busy = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> -+
> -+ if (!r_data || !r_busy) {
> -+ dev_err(&pdev->dev, "missing resource(s)\n");
> -+ return -EINVAL;
> -+ }
> -+
> -+ conf.control_and_data_register = ioremap(r_data->start, r_data->end - r_data->start + 1);
> -+ if (!conf.control_and_data_register) {
> -+ err = -ENODEV;
> -+ goto exit;
> -+ }
> -+
> -+ conf.busy_bit_register = ioremap(r_busy->start, r_busy->end - r_busy->start + 1);
> -+ if (!conf.busy_bit_register) {
> -+ err = -ENODEV;
> -+ goto exit_unmap1;
> -+ }
> -+
> -+ conf.channels =
> -+ MAX197_SET_CHANNEL_CONF(0, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(1, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(2, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(3, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(4, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(5, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(6, MAX197_RANGE_0_5) |
> -+ MAX197_SET_CHANNEL_CONF(7, MAX197_RANGE_0_5);
> -+
> -+ /* Register sysfs hooks */
> -+ if ((err = sysfs_create_group(&pdev->dev.kobj, &max197_group)))
> -+ goto exit_unmap2;
> -+
> -+ printk(PFX "TS-72xx max197 driver, v%s\n", DRV_VERSION);
> -+ return 0;
> -+
> -+exit_unmap2:
> -+ iounmap(conf.busy_bit_register);
> -+exit_unmap1:
> -+ iounmap(conf.control_and_data_register);
> -+exit:
> -+ return err;
> -+}
> -+
> -+static int __devexit ts72xx_max197_remove(struct platform_device *pdev)
> -+{
> -+ sysfs_remove_group(&pdev->dev.kobj, &max197_group);
> -+ iounmap(conf.busy_bit_register);
> -+ iounmap(conf.control_and_data_register);
> -+ return 0;
> -+}
> -+
> -+static struct platform_driver ts72xx_max197_platform_driver = {
> -+ .probe = ts72xx_max197_probe,
> -+ .remove = __devexit_p(ts72xx_max197_remove),
> -+ .driver = {
> -+ .name = "ts72xx-max197",
> -+ .owner = THIS_MODULE,
> -+ },
> -+};
> -+
> -+static int __init ts72xx_max197_init(void)
> -+{
> -+ return platform_driver_register(&ts72xx_max197_platform_driver);
> -+}
> -+
> -+static void __exit ts72xx_max197_exit(void)
> -+{
> -+ platform_driver_unregister(&ts72xx_max197_platform_driver);
> -+}
> -+
> -+#ifdef CONFIG_TS72XX_MAX197_AVERAGE
> -+module_param(average, ushort, S_IWUSR | S_IRUGO);
> -+MODULE_PARM_DESC(average, "Allow average measurement (default=1)");
> -+#endif
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("TS-72xx max197 driver");
> -+MODULE_LICENSE("GPL");
> -+MODULE_VERSION(DRV_VERSION);
> -+
> -+module_init(ts72xx_max197_init);
> -+module_exit(ts72xx_max197_exit);
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0014-ts7200_nor_flash.patch b/recipes/linux/linux-2.6.36/ts72xx/0014-ts7200_nor_flash.patch
> deleted file mode 100644
> index e49e52a..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0014-ts7200_nor_flash.patch
> +++ /dev/null
> @@ -1,181 +0,0 @@
> -From 57271199c60faf7f9b7fab8bd8c34b0936df0bfa Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Sat, 19 Jun 2010 16:56:48 +0200
> -Subject: [PATCH 14/24] ts7200_nor_flash
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Deal with 8mb or 16mb NOR Flash (TS-7200 only)
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/mtd/maps/Kconfig | 15 +++++
> - drivers/mtd/maps/Makefile | 1 +
> - drivers/mtd/maps/ts7200_flash.c | 116 +++++++++++++++++++++++++++++++++++++++
> - 3 files changed, 132 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/mtd/maps/ts7200_flash.c
> -
> -diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
> -index 701d942..c7fd9e7 100644
> ---- a/drivers/mtd/maps/Kconfig
> -+++ b/drivers/mtd/maps/Kconfig
> -@@ -414,6 +414,21 @@ config MTD_H720X
> - This enables access to the flash chips on the Hynix evaluation boards.
> - If you have such a board, say 'Y'.
> -
> -+config MTD_TS7200_NOR
> -+ tristate "CFI Flash device mapped on TS-7200"
> -+ depends on MTD_CFI && MACH_TS72XX
> -+ help
> -+ This provides a map driver for the on-board flash of the Technologic
> -+ System's TS-7200 board. The 8MB (or 16MB) flash is splitted into 3 partitions
> -+ which are accessed as separate MTD devices.
> -+
> -+config MTD_TS7200_NOR_SIZE
> -+ int "Flash size (8 or 16mb)"
> -+ depends on MTD_TS7200_NOR
> -+ default "8"
> -+ help
> -+ Enter the NOR Flash size of your TS-7200 board. Can be 8 or 16.
> -+
> - # This needs CFI or JEDEC, depending on the cards found.
> - config MTD_PCI
> - tristate "PCI MTD driver"
> -diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
> -index f216bb5..21f9bd8 100644
> ---- a/drivers/mtd/maps/Makefile
> -+++ b/drivers/mtd/maps/Makefile
> -@@ -55,6 +55,7 @@ obj-$(CONFIG_MTD_DMV182) += dmv182.o
> - obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
> - obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
> - obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
> -+obj-$(CONFIG_MTD_TS7200_NOR) += ts7200_flash.o
> - obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
> - obj-$(CONFIG_MTD_VMU) += vmu-flash.o
> - obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
> -diff --git a/drivers/mtd/maps/ts7200_flash.c b/drivers/mtd/maps/ts7200_flash.c
> -new file mode 100644
> -index 0000000..94fb4f4
> ---- /dev/null
> -+++ b/drivers/mtd/maps/ts7200_flash.c
> -@@ -0,0 +1,116 @@
> -+/*
> -+ * ts7200_flash.c - mapping for TS-7200 SBCs (8mb NOR flash)
> -+ * No platform_device resource is used here. All is hardcoded.
> -+ *
> -+ * (c) Copyright 2006-2010 Matthieu Crapet <mcrapet at gmail.com>
> -+ * Based on ts5500_flash.c by Sean Young <sean at mess.org>
> -+ *
> -+ * This program is free software; you can redistribute it and/or
> -+ * modify it under the terms of the GNU General Public License
> -+ * as published by the Free Software Foundation; either version
> -+ * 2 of the License, or (at your option) any later version.
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/types.h>
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <asm/io.h>
> -+#include <asm/sizes.h>
> -+#include <linux/mtd/mtd.h>
> -+#include <linux/mtd/map.h>
> -+#include <linux/mtd/partitions.h>
> -+#include <mach/ep93xx-regs.h>
> -+
> -+
> -+static struct mtd_info *mymtd;
> -+
> -+static struct map_info ts7200nor_map = {
> -+ .name = "Full TS-7200 NOR flash",
> -+ .size = 0, /* filled in later */
> -+ .bankwidth = 2,
> -+ .phys = EP93XX_CS6_PHYS_BASE,
> -+};
> -+
> -+/*
> -+ * MTD partitioning stuff
> -+ */
> -+#ifdef CONFIG_MTD_PARTITIONS
> -+
> -+#define TS7200_BOOTROM_PART_SIZE (SZ_128K)
> -+#define TS7200_REDBOOT_PART_SIZE (15*SZ_128K)
> -+
> -+static struct mtd_partition ts7200_nor_parts[] =
> -+{
> -+ {
> -+ .name = "TS-BOOTROM",
> -+ .offset = 0,
> -+ .size = TS7200_BOOTROM_PART_SIZE,
> -+ .mask_flags = MTD_WRITEABLE, /* force read-only */
> -+ },
> -+ {
> -+ .name = "RootFS",
> -+ .offset = MTDPART_OFS_APPEND,
> -+ .size = 0, /* filled in later */
> -+ },
> -+ {
> -+ .name = "Redboot",
> -+ .offset = MTDPART_OFS_APPEND,
> -+ .size = MTDPART_SIZ_FULL, /* up to the end */
> -+ }
> -+};
> -+#endif
> -+
> -+static int __init ts7200_nor_init(void)
> -+{
> -+ if (CONFIG_MTD_TS7200_NOR_SIZE <= 8)
> -+ ts7200nor_map.size = SZ_8M;
> -+ else
> -+ ts7200nor_map.size = SZ_16M;
> -+
> -+ printk(KERN_NOTICE "TS-7200 flash mapping: %ldmo at 0x%x\n",
> -+ ts7200nor_map.size / SZ_1M, ts7200nor_map.phys);
> -+
> -+ ts7200nor_map.virt = ioremap(ts7200nor_map.phys, ts7200nor_map.size - 1);
> -+ if (!ts7200nor_map.virt) {
> -+ printk("ts7200_flash: failed to ioremap\n");
> -+ return -EIO;
> -+ }
> -+
> -+ simple_map_init(&ts7200nor_map);
> -+ mymtd = do_map_probe("cfi_probe", &ts7200nor_map);
> -+ if (mymtd) {
> -+ mymtd->owner = THIS_MODULE;
> -+ add_mtd_device(mymtd);
> -+ #ifdef CONFIG_MTD_PARTITIONS
> -+ ts7200_nor_parts[1].size = ts7200nor_map.size - TS7200_REDBOOT_PART_SIZE;
> -+ return add_mtd_partitions(mymtd, ts7200_nor_parts, ARRAY_SIZE(ts7200_nor_parts));
> -+ #else
> -+ return 0;
> -+ #endif
> -+ }
> -+
> -+ iounmap(ts7200nor_map.virt);
> -+ return -ENXIO;
> -+}
> -+
> -+static void __exit ts7200_nor_exit(void)
> -+{
> -+ if (mymtd) {
> -+ del_mtd_device(mymtd);
> -+ map_destroy(mymtd);
> -+ mymtd = NULL;
> -+ }
> -+ if (ts7200nor_map.virt) {
> -+ iounmap(ts7200nor_map.virt);
> -+ ts7200nor_map.virt = 0;
> -+ }
> -+}
> -+
> -+module_init(ts7200_nor_init);
> -+module_exit(ts7200_nor_exit);
> -+
> -+MODULE_LICENSE("GPL");
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("MTD map driver for TS-7200 board");
> -+MODULE_VERSION("0.1");
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0015-ts72xx_sdcard.patch b/recipes/linux/linux-2.6.36/ts72xx/0015-ts72xx_sdcard.patch
> deleted file mode 100644
> index c290172..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0015-ts72xx_sdcard.patch
> +++ /dev/null
> @@ -1,3298 +0,0 @@
> -From 66c9687c9f4530e301fb8ba14b657b3f4ee3c9c6 Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Sun, 20 Jun 2010 10:46:15 +0200
> -Subject: [PATCH 15/24] ts72xx_sdcard
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -SD Card support for TS-7260. Device name is "tssda".
> -Patch based on work of Breton Saunders:
> -http://tech.groups.yahoo.com/group/ts-7000/message/15787
> -http://tech.groups.yahoo.com/group/ts-7000/message/16028
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/ts72xx.c | 24 +
> - drivers/block/Kconfig | 7 +
> - drivers/block/Makefile | 2 +
> - drivers/block/sdcore2.c | 2391 +++++++++++++++++++++++++++++++++++++++++
> - drivers/block/sdcore2.h | 372 +++++++
> - drivers/block/tssdcard.c | 415 +++++++
> - 6 files changed, 3211 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/block/sdcore2.c
> - create mode 100644 drivers/block/sdcore2.h
> - create mode 100644 drivers/block/tssdcard.c
> -
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index 96a4d54..c99f112 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -233,6 +233,29 @@ static void __init ts72xx_register_flash(void)
> - }
> -
> - /*************************************************************************
> -+ * SD Card (TS-7260 only)
> -+ *************************************************************************/
> -+
> -+static struct resource ts72xx_sdcard_resource = {
> -+ .start = TS7260_SDCARD_PHYS_BASE,
> -+ .end = TS7260_SDCARD_PHYS_BASE + 0x20,
> -+ .flags = IORESOURCE_MEM,
> -+};
> -+
> -+static struct platform_device ts72xx_sdcard = {
> -+ .name = "ts72xx-sdcard",
> -+ .id = 0,
> -+ .num_resources = 1,
> -+ .resource = &ts72xx_sdcard_resource,
> -+};
> -+
> -+static void __init ts72xx_register_sdcard(void)
> -+{
> -+ if (board_is_ts7260() || board_is_ts7400() || board_is_ts7300())
> -+ platform_device_register(&ts72xx_sdcard);
> -+}
> -+
> -+/*************************************************************************
> - * RTC
> - *************************************************************************/
> - static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
> -@@ -333,6 +356,7 @@ static void __init ts72xx_init_machine(void)
> - {
> - ep93xx_init_devices();
> - ts72xx_register_flash();
> -+ ts72xx_register_sdcard();
> - platform_device_register(&ts72xx_rtc_device);
> - platform_device_register(&ts72xx_wdt_device);
> -
> -diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
> -index de27768..80985f8 100644
> ---- a/drivers/block/Kconfig
> -+++ b/drivers/block/Kconfig
> -@@ -488,4 +488,11 @@ config BLK_DEV_HD
> -
> - If unsure, say N.
> -
> -+config BLK_DEV_TS72XX_SDCARD
> -+ tristate "TS-72XX SD Card support"
> -+ depends on ARCH_EP93XX && MACH_TS72XX
> -+ help
> -+ This option enables support SD Card control on Technologic Systems
> -+ TS-7260 SBC.
> -+
> - endif # BLK_DEV
> -diff --git a/drivers/block/Makefile b/drivers/block/Makefile
> -index aff5ac9..a4d0579 100644
> ---- a/drivers/block/Makefile
> -+++ b/drivers/block/Makefile
> -@@ -34,8 +34,10 @@ obj-$(CONFIG_VIODASD) += viodasd.o
> - obj-$(CONFIG_BLK_DEV_SX8) += sx8.o
> - obj-$(CONFIG_BLK_DEV_UB) += ub.o
> - obj-$(CONFIG_BLK_DEV_HD) += hd.o
> -+obj-$(CONFIG_BLK_DEV_TS72XX_SDCARD) += ts72xx_sdcard.o
> -
> - obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o
> - obj-$(CONFIG_BLK_DEV_DRBD) += drbd/
> -
> - swim_mod-objs := swim.o swim_asm.o
> -+ts72xx_sdcard-objs := tssdcard.o sdcore2.o
> -diff --git a/drivers/block/sdcore2.c b/drivers/block/sdcore2.c
> -new file mode 100644
> -index 0000000..6dadee1
> ---- /dev/null
> -+++ b/drivers/block/sdcore2.c
> -@@ -0,0 +1,2391 @@
> -+/*
> -+ * Copyright (c) 2006-2009, Technologic Systems
> -+ * All rights reserved.
> -+ */
> -+
> -+/*
> -+ * This code is 100% operating system/CPU independent-- not a single global
> -+ * reference, external symbol, or #include is required. Centric upon one data
> -+ * structure "struct sdcore". OS-specific callbacks for things like DMA
> -+ * acceleration and sleeping are defined by function pointers to OS-specific
> -+ * code in the struct sdcore. Minimally requires the os_sleep() callback to be
> -+ * implemented for proper SD card initialization and a pointer to start
> -+ * of SD card registers. Auto-determines TS SD core version. All other
> -+ * callback functions may be left NULL-- they are only to allow speed/CPU
> -+ * utilization improvements.
> -+ *
> -+ * 3 main public functions - sdreset(), sdread() and sdwrite(). sdreset()
> -+ * returns card size. OS specific shim is required to turn this
> -+ * simple API into the complicated, constantly changing, hacker "designed"
> -+ * horrible excuses for abstraction, block driver APIs required in other
> -+ * "modern" operating systems.
> -+ *
> -+ * Not all SD cards over the years have followed spec perfectly -- many
> -+ * don't even check CRC's on the CMD or DAT busses and some have problems
> -+ * (lock up) when reading/writing the last sectors with SD read/write multiple
> -+ * commands.
> -+ *
> -+ * The TS SD hardware cores are not much more than GPIO bit-bang cores with
> -+ * a few well-placed hardware optimizations to achieve reasonable
> -+ * performance goals. In the roughly 2000 lines of code that follow, there
> -+ * is support for all distinct TS hardware SD cores on PPC and ARM platforms,
> -+ * a generic (private) SD command layer, sdcmd(), and SD flash card
> -+ * (public) routines for initialization + read/write + some SD security
> -+ * features.
> -+ *
> -+ */
> -+
> -+/* Register offset definitions. TS-SDCORE is 4 regs total. */
> -+#define SDCMD 0
> -+#define SDGPIO 0 /* version 2 register */
> -+#define SDDAT 1
> -+#define SDSTAT2 1
> -+#define SDSTATE 2
> -+#define SDCTRL 3
> -+#define SDDAT2 4
> -+#define SDCMD2 8
> -+#define SDCTRL2 12
> -+#define SDLUN2 2
> -+
> -+struct sdcore {
> -+ /* virtual address of SD block register start, to be filled in
> -+ * by client code before calling any sdcore functions.
> -+ */
> -+ unsigned int sd_regstart;
> -+
> -+ /* public bits for sd_state bitfield, can be read from client code.
> -+ * Do not write! Other bits are used internally.
> -+ */
> -+ #define SDDAT_RX (1<<0)
> -+ #define SDDAT_TX (1<<1)
> -+ #define SDCMD_RX (1<<2)
> -+ #define SDCMD_TX (1<<3)
> -+ unsigned int sd_state;
> -+
> -+ /* Erase hint for subsequent sdwrite() call, used to optimize
> -+ * write throughput on multi-sector writes by pre-erasing this
> -+ * many sectors. XXX: this doesn't have much benefit on most SDs
> -+ */
> -+ unsigned int sd_erasehint;
> -+
> -+ /* Following this comment are 3 function pointer declarations to
> -+ * OS helper functions. The 'os_arg' member is passed as the
> -+ * first argument to the helpers and should be set by
> -+ * client code before issueing sdreset()
> -+ *
> -+ * os_dmastream(os_arg, buf, buflen)
> -+ * This function should look at sd_state and set up and run an
> -+ * appropriate DMA transfer. If buf is NULL, callee doesn't care
> -+ * about the actual data sent/received and helper function
> -+ * can do whatever it wants. Should return 0 when DMA transfer was
> -+ * run and completed successfully. If this function pointer is
> -+ * NULL, PIO methods of transfer will be used instead of DMA.
> -+ *
> -+ * os_dmaprep(os_arg, buf, buflen)
> -+ * This function is used to prepare an area of memory for a possible
> -+ * DMA transfer. This function is called once per distinct buffer
> -+ * passed in. After this function is called, os_dmastream() may be
> -+ * called one or more times (for sequential addresses) on subregions
> -+ * of the address range passed here. Should write-back or invalidate
> -+ * L1 cache lines and possibly look up physical addresses for buf
> -+ * passed in if I/O buffers. If 'os_dmaprep' is set to NULL, function
> -+ * call will not happen. (though os_dmastream() calls may still)
> -+ *
> -+ * os_delay(os_arg, microseconds)
> -+ * This function is supposed to delay or stall the processor for
> -+ * the passed in value number of microseconds.
> -+ */
> -+ void *os_arg;
> -+ int (*os_dmastream)(void *, unsigned char *, unsigned int);
> -+ void (*os_dmaprep)(void *, unsigned char *, unsigned int);
> -+ void (*os_delay)(void *, unsigned int);
> -+ void (*os_irqwait)(void *, unsigned int);
> -+ int (*os_powerok)(void *);
> -+ int (*os_timeout)(void *);
> -+ int (*os_reset_timeout)(void *);
> -+
> -+ /* If the SD card last successfully reset is write protected, this
> -+ * member will be non-zero.
> -+ */
> -+ unsigned int sd_wprot;
> -+
> -+ /* If this card may have been already initialized by TS-SDBOOT, place
> -+ * the magic token it placed in the EP93xx SYSCON ScratchReg1 here
> -+ * to avoid re-initialization.
> -+ */
> -+ unsigned int sdboot_token;
> -+
> -+ /* CRC hint for subsequent sdwrite() call, used to optimize
> -+ * write throughput while using DMA by pre-calculating CRC's for
> -+ * next write
> -+ */
> -+ unsigned char *sd_crchint;
> -+
> -+ /* The block size of the memory device. Normally 512, but can be 1024
> -+ * for larger cards
> -+ */
> -+ unsigned int sd_blocksize;
> -+
> -+ /* Password for auto-unlocking in sdreset()
> -+ */
> -+ unsigned char *sd_pwd;
> -+
> -+ /* If the SD card was password locked, this will be non-zero.
> -+ */
> -+ unsigned int sd_locked;
> -+
> -+ /* Whether or not writes can be parked.
> -+ */
> -+ unsigned int sd_writeparking;
> -+
> -+ /* Logical unit number. Some SD cores will have multiple card slots.
> -+ */
> -+ unsigned int sd_lun;
> -+
> -+ /* The rest of these members are for private internal use and should
> -+ * not be of interest to client code.
> -+ */
> -+ unsigned int sd_rcaarg;
> -+ unsigned int sd_csd[17];
> -+ unsigned int sd_crcseq;
> -+ unsigned short sd_crcs[4];
> -+ unsigned int sd_crctmp[4];
> -+ unsigned int sd_timeout;
> -+ unsigned int parked_sector;
> -+ unsigned int hw_version;
> -+ unsigned char sd_scr[8];
> -+ unsigned int sd_sz;
> -+};
> -+
> -+/* For sdreadv() / sdwritev() */
> -+struct sdiov {
> -+ unsigned char *sdiov_base;
> -+ unsigned int sdiov_nsect;
> -+};
> -+
> -+int sdreset(struct sdcore *);
> -+int sdread(struct sdcore *, unsigned int, unsigned char *, int);
> -+int sdwrite(struct sdcore *, unsigned int, unsigned char *, int);
> -+int sdreadv(struct sdcore *, unsigned int, struct sdiov *, int);
> -+int sdwritev(struct sdcore *, unsigned int, struct sdiov *, int);
> -+int sdsetwprot(struct sdcore *, unsigned int);
> -+#define SDLOCK_UNLOCK 0
> -+#define SDLOCK_SETPWD 1
> -+#define SDLOCK_CLRPWD 2
> -+#define SDLOCK_ERASE 8
> -+#ifndef SD_NOLOCKSUPPORT
> -+int sdlockctl(struct sdcore *, unsigned int, unsigned char *, unsigned char *);
> -+#endif
> -+
> -+/*
> -+ * Everything below here is secret! This code shouldn't have to change
> -+ * even for different OS.
> -+ */
> -+
> -+const static unsigned short crc16tbl[256] = {
> -+ 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
> -+ 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
> -+ 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6,
> -+ 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de,
> -+ 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485,
> -+ 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d,
> -+ 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4,
> -+ 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc,
> -+ 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823,
> -+ 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b,
> -+ 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12,
> -+ 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a,
> -+ 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41,
> -+ 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49,
> -+ 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70,
> -+ 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78,
> -+ 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f,
> -+ 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067,
> -+ 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e,
> -+ 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256,
> -+ 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d,
> -+ 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
> -+ 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c,
> -+ 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634,
> -+ 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab,
> -+ 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3,
> -+ 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a,
> -+ 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92,
> -+ 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9,
> -+ 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1,
> -+ 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8,
> -+ 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0,
> -+};
> -+
> -+const static unsigned char destagger[256] = {
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1, 0, 1,
> -+ 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3, 2, 3,
> -+};
> -+
> -+#ifndef MAX_SDCORES
> -+#define MAX_SDCORES 64
> -+#endif
> -+static struct sdcore *sdcores[MAX_SDCORES];
> -+
> -+static unsigned int crc7(unsigned int, const unsigned int *, unsigned int);
> -+static int sdreset2(struct sdcore *);
> -+static int version(struct sdcore *);
> -+static int sdfastinit(struct sdcore *sd);
> -+static int sdcmd2(struct sdcore *, unsigned short, unsigned int,
> -+ unsigned int *, unsigned char **);
> -+static int sdcmd(struct sdcore *, unsigned short, unsigned int,
> -+ unsigned int *, unsigned char **);
> -+static void mkcommand(unsigned int, unsigned int, unsigned int *);
> -+static int stop(struct sdcore *);
> -+static int stop2(struct sdcore *);
> -+static int sdread2(struct sdcore *, unsigned int, unsigned char *, int)
> -+ __attribute__ ((unused));
> -+static int do_read2(struct sdcore *, unsigned int, struct sdiov *,
> -+ unsigned int);
> -+static int do_read(struct sdcore *, unsigned int, struct sdiov *,
> -+ unsigned int);
> -+static int do_write(struct sdcore *, unsigned int, struct sdiov *,
> -+ unsigned int);
> -+static int do_write2(struct sdcore *, unsigned int, struct sdiov *,
> -+ unsigned int);
> -+static int sdsetwprot2(struct sdcore *, unsigned int);
> -+#ifndef SD_NOLOCKSUPPORT
> -+static int sdlockctl2(struct sdcore *, unsigned int, unsigned char *,
> -+ unsigned char *);
> -+#endif
> -+
> -+#ifndef SDPOKE8
> -+# define SDPOKE8(sd, x, y) \
> -+ *(volatile unsigned char *)((sd)->sd_regstart + (x)) = (y)
> -+#endif
> -+#ifndef SDPOKE32
> -+# define SDPOKE32(sd, x, y) \
> -+ *(volatile unsigned int *)((sd)->sd_regstart + (x)) = (y)
> -+#endif
> -+#ifndef SDPOKE16
> -+# define SDPOKE16(sd, x, y) \
> -+ *(volatile unsigned short *)((sd)->sd_regstart + (x)) = (y)
> -+#endif
> -+#ifndef SDPEEK8
> -+# define SDPEEK8(sd, x) *(volatile unsigned char *)((sd)->sd_regstart + (x))
> -+#endif
> -+#ifndef SDPEEK32
> -+# define SDPEEK32(sd, x) *(volatile unsigned int *)((sd)->sd_regstart + (x))
> -+#endif
> -+#ifndef SDPEEK16
> -+# define SDPEEK16(sd, x) *(volatile unsigned short *)((sd)->sd_regstart + (x))
> -+#endif
> -+
> -+#define S_DUMMY_CLK 0
> -+#define S_SEND_CMD 1
> -+#define S_WAIT_RESP 2
> -+#define S_RX_RESP 3
> -+#define S_WAIT_BUSY 4
> -+#define S_TX_WRITE 5
> -+#define S_CRC_CHECK 6
> -+#define S_OFF 7
> -+
> -+#define TYPE_SHORTRESP 2
> -+#define TYPE_LONGRESP 3
> -+#define TYPE_BSYRESP 4
> -+#define TYPE_NORESP 1
> -+#define TYPE_RXDAT 0
> -+#define TYPE_TXDAT 5
> -+#define TYPE_ABORT 6
> -+#define TYPE_RXDAT_IGNRESP 7
> -+
> -+#define CMD(idx, type) (0x40 | (idx) | ((type)<<8))
> -+
> -+#define CMD_GO_IDLE_STATE CMD(0, TYPE_NORESP)
> -+#define CMD_ALL_SEND_CID CMD(2, TYPE_LONGRESP)
> -+#define CMD_SEND_RELATIVE_ADDR CMD(3, TYPE_SHORTRESP)
> -+#define CMD_SWITCH_FUNC CMD(6, TYPE_RXDAT)
> -+#define CMD_SWITCH_FUNC2 CMD(6, TYPE_RXDAT_IGNRESP)
> -+#define CMD_SELECT_CARD CMD(7, TYPE_BSYRESP)
> -+#define CMD_DESELECT_CARD CMD(7, TYPE_NORESP)
> -+#define CMD_SEND_IF_COND CMD(8, TYPE_SHORTRESP)
> -+#define CMD_SEND_CSD CMD(9, TYPE_LONGRESP)
> -+#define CMD_PROGRAM_CSD CMD(27, TYPE_TXDAT)
> -+#define CMD_SET_BLOCKLEN CMD(16, TYPE_SHORTRESP)
> -+#define CMD_LOCK_UNLOCK CMD(42, TYPE_TXDAT)
> -+#define CMD_APP_CMD CMD(55, TYPE_SHORTRESP)
> -+#define CMD_READ_SINGLE_BLOCK CMD(17, TYPE_RXDAT)
> -+#define CMD_READ_MULTIPLE_BLOCK CMD(18, TYPE_RXDAT)
> -+#define CMD_READ_MULTIPLE_BLOCK2 CMD(18, TYPE_RXDAT_IGNRESP)
> -+#define CMD_STOP_TRANSMISSION CMD(12, TYPE_ABORT)
> -+#define CMD_SEND_STATUS CMD(13, TYPE_SHORTRESP)
> -+#define CMD_WRITE_BLOCK CMD(24, TYPE_TXDAT)
> -+#define CMD_WRITE_MULTIPLE_BLOCK CMD(25, TYPE_TXDAT)
> -+
> -+#define ACMD_SD_SEND_OP_COND CMD(41, TYPE_SHORTRESP)
> -+#define ACMD_SET_CLR_CARD_DETECT CMD(42, TYPE_SHORTRESP)
> -+#define ACMD_SET_BUS_WIDTH CMD(6, TYPE_SHORTRESP)
> -+#define ACMD_SET_WR_BLK_ERASE_COUNT CMD(23, TYPE_SHORTRESP)
> -+#define ACMD_SEND_NUM_WR_BLOCKS CMD(22, TYPE_RXDAT)
> -+#define ACMD_SEND_SCR CMD(51, TYPE_RXDAT)
> -+#define ACMD_SEND_SCR2 CMD(51, TYPE_RXDAT_IGNRESP)
> -+
> -+/* Private bits for struct sdcore, sd_state member */
> -+#define DATSSP_NOCRC (1<<4)
> -+#define DATSSP_4BIT (1<<5)
> -+#define SD_HC (1<<6)
> -+#define SD_HISPEED (1<<7)
> -+#define SD_LOSPEED (1<<8)
> -+#define SD_SELECTED (1<<9)
> -+#define SD_RESET (1<<10)
> -+
> -+#define NULL ((void *)0)
> -+
> -+static void remember_sdcore(struct sdcore *sd) {
> -+ int i, newlun = 0;
> -+
> -+ for (i = 0; i < sizeof(sdcores); i++) {
> -+ if (sdcores[i] == NULL) {
> -+ /* new core, first reset */
> -+ sdcores[i] = sd;
> -+ /* core was almost definitely power-cycled on prev lun
> -+ * sdreset2(), so we don't need to have the sdreset2()
> -+ * do it again.
> -+ */
> -+ if (newlun) sd->sd_state = SD_RESET;
> -+ break;
> -+ } else if (sdcores[i]->sd_regstart == sd->sd_regstart) {
> -+ newlun = 1;
> -+ if (sdcores[i]->sd_lun == sd->sd_lun) {
> -+ sdcores[i] = sd;
> -+ break;
> -+ }
> -+ }
> -+ }
> -+}
> -+
> -+static int activate(struct sdcore *sd) {
> -+ int i;
> -+
> -+ /* Are we already selected? */
> -+ if ((sd->sd_state & (SD_SELECTED|SD_RESET)) == SD_SELECTED)
> -+ return 0;
> -+
> -+ /* Find currently activated SD slot for this HW core */
> -+ for (i = 0; i < sizeof(sdcores); i++) {
> -+ if (sdcores[i] == NULL) break;
> -+ if (sdcores[i]->sd_regstart == sd->sd_regstart &&
> -+ sdcores[i]->sd_state & SD_SELECTED) break;
> -+ }
> -+
> -+ /* Stop whatever parked transfer it has going on. */
> -+ if (sdcores[i]) {
> -+ stop2(sdcores[i]);
> -+ sdcores[i]->sd_state &= ~SD_SELECTED;
> -+ }
> -+
> -+ /* Change clock routing, mark us as selected */
> -+#ifdef BIGENDIAN
> -+ SDPOKE16(sd, SDLUN2, sd->sd_lun << 8);
> -+#else
> -+ SDPOKE16(sd, SDLUN2, sd->sd_lun);
> -+#endif
> -+
> -+ /* Change clock frequency */
> -+ if (sd->sd_state & SD_HISPEED) SDPOKE8(sd, SDSTAT2, 0x38);
> -+ else SDPOKE8(sd, SDSTAT2, 0x18);
> -+
> -+ sd->sd_state |= SD_SELECTED;
> -+ if (sd->sd_state & SD_RESET) return 1;
> -+ else return 0;
> -+
> -+}
> -+
> -+inline static unsigned short
> -+crc16_acc(unsigned short crc, unsigned int b)
> -+{
> -+ return (crc << 8) ^ crc16tbl[(crc >> 8) ^ b];
> -+}
> -+
> -+static void sd_initcrc(struct sdcore *sd)
> -+{
> -+ int i;
> -+
> -+ for (i = 0; i < 4; i++) {
> -+ sd->sd_crctmp[i] = 0;
> -+ sd->sd_crcs[i] = 0;
> -+ }
> -+ sd->sd_crcseq = 6;
> -+}
> -+
> -+static void sd_1bit_feedcrc(struct sdcore *sd, unsigned int dat)
> -+{
> -+ sd->sd_crcs[0] = crc16_acc(sd->sd_crcs[0], dat);
> -+}
> -+
> -+static void sd_4bit_feedcrc(struct sdcore *sd, unsigned int dat)
> -+{
> -+ unsigned int a = 0, b = 0, c = 0, d = 0;
> -+ unsigned int shift = (sd->sd_crcseq & 0x7);
> -+
> -+ a = sd->sd_crctmp[0];
> -+ b = sd->sd_crctmp[1];
> -+ c = sd->sd_crctmp[2];
> -+ d = sd->sd_crctmp[3];
> -+
> -+ a |= destagger[dat] << shift;
> -+ dat >>= 1;
> -+ b |= destagger[dat] << shift;
> -+ dat >>= 1;
> -+ c |= destagger[dat] << shift;
> -+ dat >>= 1;
> -+ d |= destagger[dat] << shift;
> -+
> -+ if (shift == 0) {
> -+ sd->sd_crcs[0] = crc16_acc(sd->sd_crcs[0], a);
> -+ sd->sd_crcs[1] = crc16_acc(sd->sd_crcs[1], b);
> -+ sd->sd_crcs[2] = crc16_acc(sd->sd_crcs[2], c);
> -+ sd->sd_crcs[3] = crc16_acc(sd->sd_crcs[3], d);
> -+ a = b = c = d = 0;
> -+ }
> -+
> -+ sd->sd_crcseq -= 2;
> -+ sd->sd_crctmp[0] = a;
> -+ sd->sd_crctmp[1] = b;
> -+ sd->sd_crctmp[2] = c;
> -+ sd->sd_crctmp[3] = d;
> -+}
> -+
> -+/* This should be called 8 times to get the full 8 bytes of CRC generated */
> -+static unsigned int sd_4bit_getcrc(struct sdcore *sd)
> -+{
> -+ static const unsigned char restaggertbl[4] = { 0x0, 0x1, 0x10, 0x11 };
> -+ static const unsigned char restaggertbl_lsl1[4] =
> -+ { 0x0, 0x2, 0x20, 0x22 };
> -+ static const unsigned char restaggertbl_lsl2[4] =
> -+ { 0x0, 0x4, 0x40, 0x44 };
> -+ static const unsigned char restaggertbl_lsl3[4] =
> -+ { 0x0, 0x8, 0x80, 0x88 };
> -+ unsigned int ret;
> -+
> -+ ret = restaggertbl[sd->sd_crcs[0] >> 14];
> -+ sd->sd_crcs[0] <<= 2;
> -+ ret |= restaggertbl_lsl1[sd->sd_crcs[1] >> 14];
> -+ sd->sd_crcs[1] <<= 2;
> -+ ret |= restaggertbl_lsl2[sd->sd_crcs[2] >> 14];
> -+ sd->sd_crcs[2] <<= 2;
> -+ ret |= restaggertbl_lsl3[sd->sd_crcs[3] >> 14];
> -+ sd->sd_crcs[3] <<= 2;
> -+
> -+ return ret;
> -+}
> -+
> -+/* This should be called 2 times to get the full 2 bytes of CRC generated */
> -+static unsigned int sd_1bit_getcrc(struct sdcore *sd)
> -+{
> -+ unsigned int ret;
> -+
> -+ ret = sd->sd_crcs[0] >> 8;
> -+ sd->sd_crcs[0] = (sd->sd_crcs[0] & 0xff) << 8;
> -+ return ret;
> -+}
> -+
> -+static inline void datssp_feedcrc(struct sdcore *sd, unsigned int dat)
> -+{
> -+ if (!(sd->sd_state & DATSSP_NOCRC)) {
> -+ if (sd->sd_state & DATSSP_4BIT) sd_4bit_feedcrc(sd, dat);
> -+ else sd_1bit_feedcrc(sd, dat);
> -+ }
> -+}
> -+
> -+static inline unsigned int datssp_getcrc(struct sdcore *sd)
> -+{
> -+ unsigned int ret = 0;
> -+
> -+ if (!(sd->sd_state & DATSSP_NOCRC)) {
> -+ if (sd->sd_state & DATSSP_4BIT) ret = sd_4bit_getcrc(sd);
> -+ else ret = sd_1bit_getcrc(sd);
> -+ }
> -+ return ret;
> -+}
> -+
> -+static inline unsigned int
> -+crc7(unsigned int crc, const unsigned int *pc, unsigned int len)
> -+{
> -+ unsigned int i;
> -+ unsigned char ibit;
> -+ unsigned char c;
> -+
> -+ for (i = 0; i < len; i++, pc++) {
> -+ c = *pc;
> -+ for (ibit = 0; ibit < 8; ibit++) {
> -+ crc <<= 1;
> -+ if ((c ^ crc) & 0x80) crc ^= 0x09;
> -+
> -+ c <<= 1;
> -+ }
> -+
> -+ crc &= 0x7F;
> -+ }
> -+
> -+ return crc;
> -+}
> -+
> -+static inline void
> -+mkcommand(unsigned int cmdidx, unsigned int arg, unsigned int *retcmd)
> -+{
> -+ retcmd[0] = cmdidx;
> -+ retcmd[1] = arg >> 24;
> -+ retcmd[2] = arg >> 16;
> -+ retcmd[3] = arg >> 8;
> -+ retcmd[4] = arg;
> -+ retcmd[5] = (0x1 | (crc7(0, retcmd, 5) << 1));
> -+}
> -+
> -+static inline void reset_timeout(struct sdcore *sd) {
> -+ sd->sd_timeout = 0;
> -+ if (sd->os_reset_timeout) sd->os_reset_timeout(sd);
> -+}
> -+
> -+static inline int timeout(struct sdcore *sd) {
> -+ if (sd->sd_timeout > 1000000) return 1;
> -+ else if (sd->os_timeout) return sd->os_timeout(sd);
> -+ else sd->sd_timeout++;
> -+ return 0;
> -+}
> -+
> -+static
> -+unsigned int sdsize(struct sdcore *sd)
> -+{
> -+ unsigned int csize, csize_mult, rd_bl_len;
> -+
> -+ if (sd->sd_sz != 0) return sd->sd_sz;
> -+
> -+ if (sd->sd_csd[1] & 0xc0) {
> -+ csize = (sd->sd_csd[10] | (sd->sd_csd[9] << 8));
> -+ sd->sd_sz = (csize + 1) * 1024;
> -+ } else {
> -+ rd_bl_len = 1 << ((sd->sd_csd[6] & 0xf) - 9);
> -+ csize = ((sd->sd_csd[7] & 0x03) << 10) |
> -+ ((sd->sd_csd[8] << 2) | ((sd->sd_csd[9] & 0xc0) >> 6));
> -+ csize_mult = ((sd->sd_csd[10] & 0x03) << 1) |
> -+ ((sd->sd_csd[11] & 0x80) >> 7);
> -+ sd->sd_sz = (csize + 1) * (1 << (csize_mult + 2)) * rd_bl_len;
> -+ }
> -+ return sd->sd_sz;
> -+}
> -+
> -+static unsigned int tend_ssp(struct sdcore *sd, unsigned int **cmdresp,
> -+ unsigned char **dat) {
> -+ unsigned int d;
> -+ unsigned int s = SDPEEK8(sd, SDSTATE);
> -+
> -+ if (s & 0x8) {
> -+ if (sd->sd_state & SDCMD_RX) {
> -+ d = SDPEEK8(sd, SDCMD);
> -+ if (cmdresp) {
> -+ **cmdresp = d;
> -+ *cmdresp = *cmdresp + 1;
> -+ reset_timeout(sd);
> -+ }
> -+ } else if (sd->sd_state & SDCMD_TX) {
> -+ SDPOKE8(sd, SDCMD, **cmdresp);
> -+ *cmdresp = *cmdresp + 1;
> -+ reset_timeout(sd);
> -+ }
> -+ }
> -+
> -+ if (s & 0x10) {
> -+ if (sd->sd_state & SDDAT_RX) {
> -+ d = SDPEEK8(sd, SDDAT);
> -+ if (dat) {
> -+ **dat = d;
> -+ *dat = *dat + 1;
> -+ reset_timeout(sd);
> -+ }
> -+ } else if (sd->sd_state & SDDAT_TX) {
> -+ reset_timeout(sd);
> -+ if (dat) {
> -+ d = **dat;
> -+ *dat = *dat + 1;
> -+ SDPOKE8(sd, SDDAT, d);
> -+ datssp_feedcrc(sd, d);
> -+ } else {
> -+ d = datssp_getcrc(sd);
> -+ SDPOKE8(sd, SDDAT, d);
> -+ }
> -+ }
> -+ }
> -+
> -+ return s;
> -+}
> -+
> -+static int
> -+error(unsigned int *resp, unsigned short req)
> -+{
> -+ unsigned int crc, status;
> -+
> -+ if ((req & 0x3f) != resp[0]) return 1;
> -+
> -+ crc = (0x1 | (crc7(0, resp, 5) << 1));
> -+ if (crc != resp[5]) return 1;
> -+
> -+ status = resp[1] << 24;
> -+ status |= resp[2] << 16;
> -+ status |= resp[3] << 8;
> -+ status |= resp[4];
> -+
> -+ return status & 0xfdf90008;
> -+}
> -+
> -+static int
> -+sdcmd2(struct sdcore *sd, unsigned short req, unsigned int arg,
> -+ unsigned int *resp, unsigned char **dat)
> -+{
> -+ unsigned int i, j, s, cmdresp[17];
> -+ unsigned int resplen;
> -+ unsigned int type = (req >> 8);
> -+ unsigned int cmdidx = req;
> -+ unsigned int *cmdptr = cmdresp;
> -+ unsigned int *respptr;
> -+ unsigned int dly;
> -+ int ok32 = (sd->hw_version == 2);
> -+ int ok16 = (ok32 || (sd->hw_version == 3));
> -+ int sddat2_8;
> -+
> -+ // If no space for response provided by caller, use local buffer
> -+ if (resp == NULL) resp = cmdresp;
> -+ respptr = resp;
> -+
> -+ if (activate(sd)) return 1;
> -+
> -+ dly = sd->sd_state & SD_LOSPEED;
> -+
> -+ if (!dly) {
> -+ unsigned int x;
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+#ifdef BIGENDIAN
> -+ x = (cmdidx & 0xff);
> -+ x |= ((arg >> 24) & 0xff) << 8;
> -+ x |= ((arg >> 16) & 0xff) << 16;
> -+ x |= ((arg >> 8) & 0xff) << 24;
> -+ if (ok32) SDPOKE32(sd, SDCMD2, x);
> -+ else if (ok16) {
> -+ SDPOKE16(sd, SDCMD2, x);
> -+ SDPOKE16(sd, SDCMD2, x >> 16);
> -+ } else {
> -+ SDPOKE8(sd, SDCMD2, x);
> -+ SDPOKE8(sd, SDCMD2, x >> 8);
> -+ SDPOKE8(sd, SDCMD2, x >> 16);
> -+ SDPOKE8(sd, SDCMD2, x >> 24);
> -+ }
> -+#else
> -+ x = (cmdidx & 0xff) << 24;
> -+ x |= ((arg >> 24) & 0xff) << 16;
> -+ x |= ((arg >> 16) & 0xff) << 8;
> -+ x |= ((arg >> 8) & 0xff);
> -+ if (ok32) SDPOKE32(sd, SDCMD2, x);
> -+ else if (ok16) {
> -+ SDPOKE16(sd, SDCMD2, x >> 16);
> -+ SDPOKE16(sd, SDCMD2, x);
> -+ } else {
> -+ SDPOKE8(sd, SDCMD2, x >> 24);
> -+ SDPOKE8(sd, SDCMD2, x >> 16);
> -+ SDPOKE8(sd, SDCMD2, x >> 8);
> -+ SDPOKE8(sd, SDCMD2, x);
> -+ }
> -+#endif
> -+ SDPOKE8(sd, SDCMD2, arg);
> -+ } else {
> -+ // Build command packet
> -+ mkcommand(cmdidx, arg, cmdptr);
> -+
> -+ // Send command
> -+ for (i = 0; i < 6; i++) {
> -+ unsigned int b = *cmdptr++;
> -+ unsigned int x;
> -+
> -+ if (timeout(sd)) break;
> -+ for (j = 0; j < 8; j++) {
> -+ x = 0x8f | ((b & 0x80) >> 3);
> -+ b = b << 1;
> -+ SDPOKE8(sd, SDGPIO, x); // clk negedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ x |= 0x20;
> -+ SDPOKE8(sd, SDGPIO, x); // clk posedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ }
> -+ }
> -+ }
> -+
> -+ if (type == TYPE_NORESP) goto done;
> -+ else if (type == TYPE_RXDAT_IGNRESP) goto ignresp;
> -+ else if (type == TYPE_LONGRESP) resplen = 17;
> -+ else resplen = 6;
> -+
> -+ // clock until start bit on CMD pin
> -+ while(1) {
> -+ if (timeout(sd)) {
> -+ goto done;
> -+ }
> -+ if (req == CMD_SEND_IF_COND) sd->sd_timeout += 100000;
> -+ SDPOKE8(sd, SDGPIO, 0xdf); // clk negedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ s = SDPEEK8(sd, SDGPIO); // sample
> -+ if ((s & 0x10) == 0x0) break;
> -+ SDPOKE8(sd, SDGPIO, 0xff); // clk posedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ }
> -+ reset_timeout(sd);
> -+
> -+ // Next we receive the response.
> -+ if (ok16 && !ok32) sddat2_8 = SDDAT2 + 1;
> -+ else sddat2_8 = SDDAT2;
> -+ if (dly) for (i = 0; i < resplen; i++) {
> -+ unsigned int r = 0;
> -+
> -+ for (j = 0; j < 8; j++) {
> -+ SDPOKE8(sd, SDGPIO, 0xdf); // clk negedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ s = SDPEEK8(sd, SDGPIO); // sample
> -+ SDPOKE8(sd, SDGPIO, 0xff); // clk posedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ r = r << 1;
> -+ r |= ((s & 0x10) >> 4);
> -+ }
> -+
> -+ *respptr++ = r;
> -+ } else while (resplen > 0) {
> -+ unsigned int r;
> -+
> -+#ifdef BIGENDIAN
> -+ if (ok32 && resplen >= 4) {
> -+ r = SDPEEK32(sd, SDCMD2);
> -+ *respptr++ = r & 0xff;
> -+ *respptr++ = (r >> 8) & 0xff;
> -+ *respptr++ = (r >> 16) & 0xff;
> -+ *respptr++ = (r >> 24);
> -+ resplen -= 4;
> -+ } else if (ok16 && resplen >= 2) {
> -+ r = SDPEEK16(sd, SDCMD2);
> -+ *respptr++ = r & 0xff;
> -+ *respptr++ = (r >> 8) & 0xff;
> -+
> -+ resplen -= 2;
> -+ } else {
> -+ *respptr++ = SDPEEK8(sd, sddat2_8);
> -+ resplen--;
> -+ }
> -+#else
> -+ if (ok32 && resplen >= 4) {
> -+ r = SDPEEK32(sd, SDCMD2);
> -+ *respptr++ = (r >> 24);
> -+ *respptr++ = (r >> 16) & 0xff;
> -+ *respptr++ = (r >> 8) & 0xff;
> -+ *respptr++ = r & 0xff;
> -+ resplen -= 4;
> -+ } else if (ok16 && resplen >= 2) {
> -+ r = SDPEEK16(sd, SDCMD2);
> -+ *respptr++ = (r >> 8) & 0xff;
> -+ *respptr++ = r & 0xff;
> -+ resplen -= 2;
> -+ } else {
> -+ *respptr++ = SDPEEK8(sd, sddat2_8);
> -+ resplen--;
> -+ }
> -+#endif
> -+ }
> -+ if (type == TYPE_BSYRESP) {
> -+ s = 0;
> -+ while ((s & 0x7) != 0x7) {
> -+ if (timeout(sd)) break;
> -+ SDPOKE8(sd, SDGPIO, 0x9f); // clk negedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ s = s << 1;
> -+ s |= SDPEEK8(sd, SDGPIO) & 0x1;
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+ if (dly) SDPEEK8(sd, SDGPIO);
> -+ }
> -+ }
> -+
> -+ignresp:
> -+
> -+ if (type == TYPE_ABORT)
> -+ sd->sd_state &= ~(SDDAT_RX|SDDAT_TX);
> -+
> -+#ifndef SD_READONLYDMA
> -+ if (type == TYPE_TXDAT) {
> -+ sd->sd_state |= SDDAT_TX;
> -+ /* 2 clocks for nWR */
> -+ SDPOKE8(sd, SDGPIO, 0xdf); // clk negedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ SDPOKE8(sd, SDGPIO, 0xff); // clk posedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ SDPOKE8(sd, SDGPIO, 0xdf); // clk negedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ SDPOKE8(sd, SDGPIO, 0xff); // clk posedge
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (sd->sd_state & DATSSP_4BIT)
> -+ SDPOKE8(sd, SDGPIO, 0x10); // assert start, clk negedge
> -+ else
> -+ SDPOKE8(sd, SDGPIO, 0x1e);
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (sd->sd_state & DATSSP_4BIT)
> -+ SDPOKE8(sd, SDGPIO, 0x30); // clk posedge
> -+ else
> -+ SDPOKE8(sd, SDGPIO, 0x3e);
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ if (dly) SDPEEK8(sd, SDGPIO); // delay
> -+ }
> -+#endif
> -+
> -+ if (type == TYPE_RXDAT || type == TYPE_RXDAT_IGNRESP)
> -+ sd->sd_state |= SDDAT_RX;
> -+
> -+done:
> -+ // 8 clocks before stopping
> -+ if (!(sd->sd_state & (SDDAT_TX|SDDAT_RX))) {
> -+ if (dly) for (i = 0; i < 8; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ } else {
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPOKE8(sd, SDCMD2, 0xff);
> -+ }
> -+ }
> -+ if (timeout(sd)) return 1;
> -+ else return 0;
> -+
> -+}
> -+
> -+
> -+static int
> -+sdcmd(struct sdcore *sd, unsigned short req, unsigned int arg,
> -+ unsigned int *resp, unsigned char **dat)
> -+{
> -+ unsigned int s, cmdresp[17];
> -+ unsigned int resplen;
> -+ unsigned int type = (req >> 8);
> -+ unsigned int cmdidx = req;
> -+ unsigned int *cmdptr = cmdresp;
> -+ unsigned int *cmd = cmdresp;
> -+ unsigned int *respptr;
> -+ unsigned int ndat;
> -+
> -+ if (sd->hw_version != 0) return sdcmd2(sd, req, arg, resp, dat);
> -+
> -+ // If no space for response provided by caller, use local buffer
> -+ if (resp == NULL) resp = cmdresp;
> -+ respptr = resp;
> -+
> -+ // Before continuing, we must wait for the FSM to get to the
> -+ // S_SEND_CMD state. After a previous command, we may still be
> -+ // in S_DUMMY_CLK or in case of an ABORT, we may be in the middle of
> -+ // clocking a byte for TX or RX.
> -+ s = SDPEEK8(sd, SDSTATE);
> -+ while ((s & 0x7) != S_SEND_CMD) {
> -+ if (timeout(sd)) break;
> -+ s = SDPEEK8(sd, SDSTATE);
> -+ }
> -+
> -+ // We know we're in S_SEND_CMD, but we may need to change the
> -+ // command type. This won't cause a state change.
> -+ if ((s & 0xe7) != (S_SEND_CMD | (type << 5)))
> -+ SDPOKE8(sd, SDSTATE, S_SEND_CMD | (type << 5));
> -+
> -+ // Build command packet
> -+ mkcommand(cmdidx, arg, cmdptr);
> -+
> -+ // Next, we loop while tending the SSPs until we get our last
> -+ // byte of command data out. We may get a few bytes from the DAT
> -+ // SSP if we are aborting a previous data transfer command. If we do
> -+ // those get placed in a buffer or thrown away based on the callers
> -+ // "dat" parameter.
> -+ sd->sd_state |= SDCMD_TX;
> -+ while ((cmdptr - cmd) != 6) {
> -+ if (timeout(sd)) break;
> -+ s = tend_ssp(sd, &cmdptr, dat);
> -+ }
> -+ sd->sd_state &= ~SDCMD_TX;
> -+
> -+ // If we got out of sync with the hardware, that would be bad.
> -+ // The hardware should still be in S_SEND_CMD for the last CMDSSP
> -+ // byte.
> -+ if ((s & 0x7) != S_SEND_CMD) {
> -+ SDPOKE8(sd, SDSTATE, S_OFF);
> -+ return 1;
> -+ }
> -+
> -+ if (type == TYPE_NORESP) goto done;
> -+ else if (type == TYPE_LONGRESP) resplen = 17;
> -+ else resplen = 6;
> -+
> -+ // Next state should be S_WAIT_RESP or S_RX_RESP. We may get
> -+ // more bytes from the DATSSP while shifting out our last bits of cmd
> -+ while (((s & 0x7) != S_WAIT_RESP) && ((s & 0x7) != S_RX_RESP)) {
> -+ if (timeout(sd)) break;
> -+ if (req == CMD_SEND_IF_COND) sd->sd_timeout += 1000;
> -+ s = tend_ssp(sd, NULL, dat);
> -+ }
> -+
> -+ // Once we're in S_WAIT_RESP or S_RX_RESP though, the DATSSP is only
> -+ // active for 2 more clocks at the beginning of the S_WAIT_RESP state.
> -+ // This is enough for one more byte in 4-bit mode, though we may have
> -+ // 2 bytes already in our DATSSP.
> -+ if (sd->sd_state & (SDDAT_RX|SDDAT_TX)) {
> -+ do {
> -+ if (timeout(sd)) break;
> -+ s = tend_ssp(sd, NULL, dat);
> -+ } while (!(s & 0x18));
> -+
> -+ // We've now read/wrote one more byte to the DATSSP
> -+ // which should allow our FSM to advance to the RX_RESP state.
> -+ // If we pick up more than 2 more DATSSP bytes, something is
> -+ // wrong.
> -+ ndat = 0;
> -+ while ((s & 0x7) != S_RX_RESP) {
> -+ if (timeout(sd) || ndat > 2) break;
> -+ s = tend_ssp(sd, NULL, dat);
> -+ if (s & 0x10) ndat++;
> -+ }
> -+
> -+ if (ndat > 2) {
> -+ SDPOKE8(sd, SDSTATE, S_OFF);
> -+ return 1;
> -+ }
> -+ }
> -+
> -+ // We're now done with whatever business we had remaining with the
> -+ // previous command's DATSSP transfer since we've either just got our
> -+ // first byte of response or our last byte of data
> -+ sd->sd_state &= ~(SDDAT_RX|SDDAT_TX);
> -+ if (type == TYPE_RXDAT) sd->sd_state |= SDDAT_RX;
> -+
> -+ // Next we receive the response. If this is TYPE_RXDAT command,
> -+ // or an abortion of a previous TYPE_RXDAT command, we may get a
> -+ // few bytes from the DAT SSP also.
> -+ sd->sd_state |= SDCMD_RX;
> -+ while ((respptr - resp) != resplen) {
> -+ if (timeout(sd)) break;
> -+ s = tend_ssp(sd, &respptr, dat);
> -+ if ((s & 0x10) && (resp == respptr)) {
> -+ SDPOKE8(sd, SDSTATE, S_OFF);
> -+ sd->sd_state &= ~(SDCMD_RX|SDDAT_RX);
> -+ return 1;
> -+ }
> -+ }
> -+ sd->sd_state &= ~SDCMD_RX;
> -+
> -+ if (type == TYPE_ABORT)
> -+ sd->sd_state &= ~(SDDAT_RX|SDDAT_TX);
> -+
> -+ if (type == TYPE_TXDAT) sd->sd_state |= SDDAT_TX;
> -+
> -+done:
> -+ if (timeout(sd)) return 1;
> -+ else return 0;
> -+
> -+}
> -+
> -+static int datssp_stream2(struct sdcore *sd, unsigned char **dat,
> -+ unsigned int buflen)
> -+{
> -+ unsigned char *d;
> -+ int ret;
> -+#ifndef SD_READONLYDMA
> -+ int ok32;
> -+ int ok16;
> -+ int sddat2_8;
> -+ unsigned int x;
> -+#endif
> -+
> -+ if (sd->os_dmastream /* && (sd->sd_state & SDDAT_RX) */) {
> -+ d = dat ? *dat : NULL;
> -+ ret = sd->os_dmastream(sd->os_arg, d, buflen);
> -+ if (!ret && d) *dat += buflen;
> -+ return ret;
> -+ }
> -+
> -+#ifndef SD_READONLYDMA
> -+ d = *dat;
> -+
> -+ while (buflen > 512) {
> -+ datssp_stream2(sd, dat, 512);
> -+ if (sd->os_irqwait) sd->os_irqwait(sd->os_arg, 1);
> -+ buflen -= 512;
> -+ d = *dat;
> -+ }
> -+
> -+ ok32 = (sd->hw_version == 2);
> -+ ok16 = (ok32 || (sd->hw_version == 3));
> -+ if (ok16 && !ok32) sddat2_8 = SDDAT2 + 1;
> -+ else sddat2_8 = SDDAT2;
> -+
> -+ if (sd->sd_state & SDDAT_RX) {
> -+
> -+ while (((int)d & 0x1) || buflen == 1) {
> -+ *d++ = SDPEEK8(sd, sddat2_8);
> -+ buflen--;
> -+ }
> -+
> -+ if (((int)d & 0x2) && buflen >= 2) {
> -+ if (ok16) *(unsigned short *)(d) = SDPEEK16(sd, SDDAT2);
> -+ else {
> -+#ifdef BIGENDIAN
> -+ x = SDPEEK8(sd, sddat2_8) << 8;
> -+ x |= SDPEEK8(sd, sddat2_8);
> -+#else
> -+ x = SDPEEK8(sd, sddat2_8);
> -+ x |= SDPEEK8(sd, sddat2_8) << 8;
> -+#endif
> -+ *(unsigned short *)(d) = x;
> -+ }
> -+ buflen -= 2;
> -+ d += 2;
> -+ }
> -+
> -+ if (ok32) while (buflen >= 4) {
> -+ *(unsigned int *)(d) = SDPEEK32(sd, SDDAT2);
> -+ buflen -= 4;
> -+ d += 4;
> -+ } else if (ok16) while (buflen >= 4) {
> -+#ifdef BIGENDIAN
> -+ x = SDPEEK16(sd, SDDAT2) << 16;
> -+ x |= SDPEEK16(sd, SDDAT2);
> -+#else
> -+ x = SDPEEK16(sd, SDDAT2);
> -+ x |= SDPEEK16(sd, SDDAT2) << 16;
> -+#endif
> -+ buflen -= 4;
> -+ *(unsigned int *)(d) = x;
> -+ d += 4;
> -+ } else while (buflen >= 4) {
> -+#ifdef BIGENDIAN
> -+ x = SDPEEK8(sd, sddat2_8) << 24;
> -+ x |= SDPEEK8(sd, sddat2_8) << 16;
> -+ x |= SDPEEK8(sd, sddat2_8) << 8;
> -+ x |= SDPEEK8(sd, sddat2_8);
> -+#else
> -+ x = SDPEEK8(sd, sddat2_8);
> -+ x |= SDPEEK8(sd, sddat2_8) << 8;
> -+ x |= SDPEEK8(sd, sddat2_8) << 16;
> -+ x |= SDPEEK8(sd, sddat2_8) << 24;
> -+#endif
> -+ buflen -= 4;
> -+ *(unsigned int *)(d) = x;
> -+ d += 4;
> -+ }
> -+ } else {
> -+ while (((int)d & 0x1) || buflen == 1) {
> -+ SDPOKE8(sd, SDDAT2, *d++);
> -+ buflen--;
> -+ }
> -+
> -+ if (((int)d & 0x2) && buflen >= 2) {
> -+ if (ok16) SDPOKE16(sd, SDDAT2, *(unsigned short *)(d));
> -+ else {
> -+ x = *(unsigned short *)(d);
> -+#ifdef BIGENDIAN
> -+ SDPOKE8(sd, SDDAT2, x >> 8);
> -+ SDPOKE8(sd, SDDAT2, x);
> -+#else
> -+ SDPOKE8(sd, SDDAT2, x);
> -+ SDPOKE8(sd, SDDAT2, x >> 8);
> -+#endif
> -+ }
> -+ buflen -= 2;
> -+ d += 2;
> -+ }
> -+
> -+ if (ok32) while (buflen >= 4) {
> -+ SDPOKE32(sd, SDDAT2, *(unsigned int *)(d));
> -+ buflen -= 4;
> -+ d += 4;
> -+ } else if (ok16) while (buflen >= 4) {
> -+ x = *(unsigned int *)(d);
> -+ buflen -= 4;
> -+ d += 4;
> -+#ifdef BIGENDIAN
> -+ SDPOKE16(sd, SDDAT2, x >> 16);
> -+ SDPOKE16(sd, SDDAT2, x);
> -+#else
> -+ SDPOKE16(sd, SDDAT2, x);
> -+ SDPOKE16(sd, SDDAT2, x >> 16);
> -+#endif
> -+ } else while (buflen >= 4) {
> -+ x = *(unsigned int *)(d);
> -+ buflen -= 4;
> -+ d += 4;
> -+#ifdef BIGENDIAN
> -+ SDPOKE8(sd, SDDAT2, x >> 24);
> -+ SDPOKE8(sd, SDDAT2, x >> 16);
> -+ SDPOKE8(sd, SDDAT2, x >> 8);
> -+ SDPOKE8(sd, SDDAT2, x);
> -+#else
> -+ SDPOKE8(sd, SDDAT2, x);
> -+ SDPOKE8(sd, SDDAT2, x >> 8);
> -+ SDPOKE8(sd, SDDAT2, x >> 16);
> -+ SDPOKE8(sd, SDDAT2, x >> 24);
> -+#endif
> -+ }
> -+ }
> -+
> -+ *dat = d;
> -+
> -+ if (buflen > 0) return datssp_stream2(sd, dat, buflen);
> -+ else return 0;
> -+#else
> -+ return 0;
> -+#endif
> -+}
> -+
> -+static int datssp_stream(struct sdcore *sd, unsigned char **dat,
> -+ unsigned int buflen)
> -+{
> -+ unsigned int s, t, byte = 0;
> -+ unsigned char *d;
> -+
> -+ if (((sd->sd_state & SDDAT_RX) && sd->os_dmastream) /* ||
> -+ ((sd->sd_state & SDDAT_TX) && sd->os_dmastream && dat) */ ) {
> -+ unsigned char *d = dat ? *dat : NULL;
> -+ int ret = sd->os_dmastream(sd->os_arg, d, buflen);
> -+ if (!ret && d) *dat += buflen;
> -+ return ret;
> -+ }
> -+
> -+ if (sd->hw_version > 0) return datssp_stream2(sd, dat, buflen);
> -+
> -+ while (buflen) {
> -+ if (timeout(sd)) return 1;
> -+ s = tend_ssp(sd, NULL, dat);
> -+ if (s & 0x10) {
> -+ buflen--;
> -+ if (byte++ > 7) {
> -+ if (sd->sd_state & SDDAT_RX)
> -+ goto fastrx;
> -+ else goto fasttx;
> -+ }
> -+ }
> -+ }
> -+
> -+ // Now we can go faster (PIO)
> -+fastrx:
> -+ if (dat) {
> -+ d = *dat;
> -+ while (buflen) {
> -+ s = SDPEEK8(sd, SDDAT);
> -+ *d = s;
> -+ buflen--;
> -+ d++;
> -+ }
> -+ *dat = d;
> -+ } else {
> -+ while (buflen--) SDPEEK8(sd, SDDAT);
> -+ }
> -+ return 0;
> -+
> -+fasttx:
> -+ if (dat) {
> -+ d = *dat;
> -+ while (buflen) {
> -+ t = *d;
> -+ SDPOKE8(sd, SDDAT, t);
> -+ buflen--;
> -+ d++;
> -+ datssp_feedcrc(sd, t);
> -+ }
> -+ *dat = d;
> -+ } else {
> -+ while (buflen--) SDPOKE8(sd, SDDAT, datssp_getcrc(sd));
> -+ }
> -+ return 0;
> -+}
> -+
> -+static int stop(struct sdcore *sd)
> -+{
> -+ int ret;
> -+ unsigned int resp[6];
> -+
> -+ if (sd->hw_version) return stop2(sd);
> -+
> -+ if (sd->parked_sector) {
> -+ if (sd->sd_state & SDDAT_TX) {
> -+ /* wait to get out of S_WAIT_BUSY */
> -+ while ((SDPEEK8(sd, SDSTATE) & 0x7) != S_TX_WRITE)
> -+ if (timeout(sd)) break;
> -+
> -+ /* abort parked write */
> -+ SDPOKE8(sd, SDSTATE, S_SEND_CMD | (TYPE_ABORT << 5));
> -+ sd->sd_state &= ~SDDAT_TX;
> -+ sd->sd_state |= SDDAT_RX;
> -+ ret = sdcmd(sd, CMD_STOP_TRANSMISSION, 0, resp, NULL);
> -+ sd->sd_state &= ~SDDAT_RX;
> -+ SDPOKE8(sd, SDSTATE, S_WAIT_BUSY | (TYPE_BSYRESP << 5));
> -+ } else {
> -+ /* abort parked read */
> -+ SDPOKE8(sd, SDSTATE, S_SEND_CMD | (TYPE_ABORT << 5));
> -+ ret = sdcmd(sd, CMD_STOP_TRANSMISSION, 0, resp, NULL);
> -+ }
> -+ sd->parked_sector = 0;
> -+ if (ret || error(resp, CMD_STOP_TRANSMISSION) || timeout(sd))
> -+ return 1;
> -+ }
> -+ return 0;
> -+}
> -+
> -+static int stop2(struct sdcore *sd)
> -+{
> -+ int ret;
> -+ unsigned int resp[6];
> -+
> -+ if (sd->parked_sector) {
> -+ if (sd->os_irqwait) sd->os_irqwait(sd->os_arg, 0);
> -+ if (sd->sd_state & SDDAT_TX) {
> -+ /* abort parked write */
> -+ ret = sdcmd2(sd, CMD_STOP_TRANSMISSION, 0, resp, NULL);
> -+ SDPOKE8(sd, SDCTRL2, 0x0);
> -+ if (sd->os_irqwait) sd->os_irqwait(sd->os_arg, 5);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+
> -+ /*
> -+ while ((SDPEEK8(sd, SDGPIO) & 0xf) != 0xf) {
> -+ sd->os_delay(sd->os_arg, 1);
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ if (timeout(sd)) return 1;
> -+ }
> -+ */
> -+ reset_timeout(sd);
> -+ } else {
> -+ /* abort parked read */
> -+ ret = sdcmd2(sd, CMD_STOP_TRANSMISSION, 0, resp, NULL);
> -+ }
> -+ sd->parked_sector = 0;
> -+ if (ret || error(resp, CMD_STOP_TRANSMISSION) || timeout(sd)) {
> -+ return 1;
> -+ }
> -+ }
> -+ return 0;
> -+}
> -+
> -+static int do_read2(struct sdcore *sd, unsigned int sector, struct sdiov *iov,
> -+ unsigned int iovcnt)
> -+{
> -+ unsigned int ret, n, s, sz;
> -+ unsigned char *datptr, *dat;
> -+
> -+ if (iovcnt == 0) return 0;
> -+
> -+ if (activate(sd)) return 1;
> -+
> -+ n = iov->sdiov_nsect;
> -+ datptr = dat = iov->sdiov_base;
> -+ sz = sdsize(sd);
> -+ if (sector >= sz) return 0;
> -+
> -+ if (sd->parked_sector) {
> -+ if (!(sd->sd_state & SDDAT_TX) && sd->parked_sector == sector) {
> -+ if (sd->os_irqwait && !sd->os_dmastream)
> -+ sd->os_irqwait(sd->os_arg, 3);
> -+ goto receive;
> -+ }
> -+
> -+ stop2(sd);
> -+ }
> -+
> -+ if (sd->sd_state & SD_HC)
> -+ ret = sdcmd2(sd, CMD_READ_MULTIPLE_BLOCK2, sector, NULL, NULL);
> -+ else
> -+ ret = sdcmd2(sd, CMD_READ_MULTIPLE_BLOCK2, sector * 512, NULL, NULL);
> -+
> -+ do {
> -+ if (timeout(sd)) return 1;;
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ s = SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ } while ((s & 0xf) != 0x0);
> -+ reset_timeout(sd);
> -+
> -+receive:
> -+ if (sd->os_dmaprep && sd->os_dmastream)
> -+ sd->os_dmaprep(sd->os_arg, datptr, n * 512);
> -+
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ sd->parked_sector = sector + n;
> -+
> -+nextiov:
> -+ if (sd->parked_sector > sz) {
> -+ n -= sd->parked_sector - sz;
> -+ sd->parked_sector = sz;
> -+ }
> -+ datssp_stream2(sd, &datptr, n * 512);
> -+
> -+ if (--iovcnt) {
> -+ ++iov;
> -+ n = iov->sdiov_nsect;
> -+ datptr = iov->sdiov_base;
> -+ sd->parked_sector += n;
> -+ if (sd->os_dmaprep && sd->os_dmastream)
> -+ sd->os_dmaprep(sd->os_arg, datptr, n * 512);
> -+ goto nextiov;
> -+ }
> -+
> -+ /* s = SDPEEK8(sd, SDSTAT2);
> -+ if (s & 0x44) {
> -+ sd->sd_timeout = 1000001;
> -+ return 1;
> -+ }
> -+ else */ return 0;
> -+}
> -+
> -+static int do_read(struct sdcore *sd, unsigned int sector, struct sdiov *iov,
> -+ unsigned int iovcnt)
> -+{
> -+ unsigned int resp[6], ret, n, sz;
> -+ unsigned char *datptr, *dat;
> -+
> -+ if (iovcnt == 0) return 0;
> -+
> -+ n = iov->sdiov_nsect;
> -+ datptr = dat = iov->sdiov_base;
> -+ sz = sdsize(sd);
> -+ if (sector >= sz) return 0;
> -+
> -+ if (sd->parked_sector) {
> -+ if (!(sd->sd_state & SDDAT_TX) && sd->parked_sector == sector)
> -+ goto receive;
> -+
> -+ stop(sd);
> -+ }
> -+
> -+ if (sd->sd_state & SD_HC)
> -+ ret = sdcmd(sd, CMD_READ_MULTIPLE_BLOCK, sector, resp, &datptr);
> -+ else
> -+ ret = sdcmd(sd, CMD_READ_MULTIPLE_BLOCK, sector * 512, resp, &datptr);
> -+ if (ret || error(resp, CMD_READ_MULTIPLE_BLOCK)) return 1;
> -+
> -+receive:
> -+ if (sd->os_dmaprep && sd->os_dmastream)
> -+ sd->os_dmaprep(sd->os_arg, datptr, n * 512 - (datptr - dat));
> -+
> -+ datssp_stream(sd, &datptr, 512 - (datptr - dat));
> -+ datssp_stream(sd, NULL, 6);
> -+
> -+ sd->parked_sector = sector + n;
> -+ if (sd->parked_sector > sz) {
> -+ n -= sd->parked_sector - sz;
> -+ sd->parked_sector = sz;
> -+ }
> -+ n--;
> -+
> -+nextiov:
> -+ while (n--) {
> -+ SDPOKE8(sd, SDSTATE, S_WAIT_RESP | (TYPE_RXDAT << 5));
> -+ datssp_stream(sd, NULL, 2); // last part of prev CRC
> -+ datssp_stream(sd, &datptr, 512);
> -+ datssp_stream(sd, NULL, 6); // first part of CRC
> -+ }
> -+
> -+ if (--iovcnt) {
> -+ ++iov;
> -+ n = iov->sdiov_nsect;
> -+ datptr = iov->sdiov_base;
> -+ sd->parked_sector += n;
> -+ if (sd->parked_sector > sz) {
> -+ n -= sd->parked_sector - sz;
> -+ sd->parked_sector = sz;
> -+ }
> -+ if (sd->os_dmaprep && sd->os_dmastream && n > 0)
> -+ sd->os_dmaprep(sd->os_arg, datptr, n * 512);
> -+ goto nextiov;
> -+ }
> -+
> -+ SDPOKE8(sd, SDSTATE, S_WAIT_RESP | (TYPE_RXDAT << 5));
> -+ datssp_stream(sd, NULL, 2); // last part of prev CRC
> -+ return 0;
> -+}
> -+
> -+static int do_write2(struct sdcore *sd, unsigned int sector, struct sdiov *iov,
> -+ unsigned int iovcnt)
> -+{
> -+ unsigned char *datptr;
> -+ unsigned int resp[6], ret, n, s, sz, ss;
> -+
> -+ if (sd->sd_wprot) return 1;
> -+
> -+ if (iovcnt == 0) return 0;
> -+
> -+ if (activate(sd)) return 1;
> -+
> -+ sz = sdsize(sd);
> -+ if (sector >= sz) return 0;
> -+
> -+ if (sd->os_powerok) {
> -+ int ok = sd->os_powerok(sd);
> -+ if (!ok && sd->parked_sector) {
> -+ stop2(sd);
> -+ return 1;
> -+ } else if (!ok) return 1;
> -+ }
> -+
> -+ if (sd->parked_sector) {
> -+ if ((sd->sd_state & SDDAT_TX) && sd->parked_sector == sector)
> -+ goto transmit;
> -+
> -+ stop2(sd);
> -+ }
> -+
> -+ if (sd->sd_erasehint) {
> -+ sdcmd2(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SET_WR_BLK_ERASE_COUNT, sd->sd_erasehint,
> -+ NULL, NULL);
> -+ sd->sd_erasehint = 0;
> -+ }
> -+
> -+ if (sd->sd_state & SD_HC)
> -+ ret = sdcmd2(sd, CMD_WRITE_MULTIPLE_BLOCK, sector, resp, NULL);
> -+ else
> -+ ret = sdcmd2(sd, CMD_WRITE_MULTIPLE_BLOCK, sector * 512, resp, NULL);
> -+ if (ret || error(resp, CMD_WRITE_MULTIPLE_BLOCK)) {
> -+ return 1;
> -+ }
> -+ sd->parked_sector = sector;
> -+ ss = SDPEEK8(sd, SDSTAT2);
> -+
> -+transmit:
> -+ while (iovcnt--) {
> -+ datptr = iov->sdiov_base;
> -+ n = iov->sdiov_nsect;
> -+ sd->parked_sector += n;
> -+ if (sd->parked_sector > sz) {
> -+ n -= sd->parked_sector - sz;
> -+ sd->parked_sector = sz;
> -+ }
> -+ datssp_stream2(sd, &datptr, n * 512);
> -+ iov++;
> -+ }
> -+
> -+ if (!sd->sd_writeparking) {
> -+ ret = stop2(sd);
> -+ if (ret) return ret;
> -+ }
> -+
> -+ if (sd->os_irqwait) sd->os_irqwait(sd->os_arg, 2);
> -+
> -+ s = SDPEEK8(sd, SDSTAT2);
> -+ if (s & 0x44) {
> -+ sd->sd_timeout = 1000001;
> -+ return 1;
> -+ } else {
> -+ reset_timeout(sd);
> -+ return 0;
> -+ }
> -+}
> -+
> -+static int do_write(struct sdcore *sd, unsigned int sector, struct sdiov *iov,
> -+ unsigned int iovcnt)
> -+{
> -+ unsigned char *datptr, *crcptr, **crcptrptr;
> -+ unsigned int resp[6], ret, n, sz;
> -+
> -+ if (sd->sd_wprot) return 1;
> -+
> -+ if (iovcnt == 0) return 0;
> -+
> -+ sz = sdsize(sd);
> -+ if (sector >= sz) return 0;
> -+
> -+ if (0 /* sd->sd_crchint */) {
> -+ // CRC is pre-calculated so don't recalculate
> -+ crcptr = sd->sd_crchint;
> -+ crcptrptr = &crcptr;
> -+ sd->sd_state |= DATSSP_NOCRC;
> -+ sd->sd_crchint = NULL;
> -+ } else {
> -+ crcptrptr = NULL;
> -+ sd->sd_state &= ~DATSSP_NOCRC;
> -+ }
> -+
> -+ if (sd->parked_sector) {
> -+ if ((sd->sd_state & SDDAT_TX) && sd->parked_sector == sector)
> -+ goto transmit;
> -+
> -+ stop(sd);
> -+ }
> -+
> -+ if (sd->sd_erasehint) {
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SET_WR_BLK_ERASE_COUNT, sd->sd_erasehint,
> -+ NULL, NULL);
> -+ sd->sd_erasehint = 0;
> -+ }
> -+
> -+ if (sd->sd_state & SD_HC)
> -+ ret = sdcmd(sd, CMD_WRITE_MULTIPLE_BLOCK, sector, resp, NULL);
> -+ else
> -+ ret = sdcmd(sd, CMD_WRITE_MULTIPLE_BLOCK, sector * 512, resp, NULL);
> -+ if (ret || error(resp, CMD_WRITE_MULTIPLE_BLOCK)) {
> -+ return 1;
> -+ }
> -+ sd->parked_sector = sector;
> -+
> -+transmit:
> -+ while (iovcnt--) {
> -+ datptr = iov->sdiov_base;
> -+ n = iov->sdiov_nsect;
> -+ sd->parked_sector += n;
> -+ if (sd->parked_sector > sz) {
> -+ n -= sd->parked_sector - sz;
> -+ sd->parked_sector = sz;
> -+ }
> -+ while (n--) {
> -+ datssp_stream(sd, &datptr, 512);
> -+ datssp_stream(sd, crcptrptr, 8); // CRC bytes
> -+ SDPOKE8(sd, SDSTATE, S_CRC_CHECK | (TYPE_TXDAT << 5));
> -+ }
> -+ iov++;
> -+ }
> -+
> -+ if (!sd->sd_writeparking) {
> -+ stop(sd);
> -+ }
> -+
> -+ return 0;
> -+}
> -+
> -+static
> -+int sdfastinit(struct sdcore *sd)
> -+{
> -+ SDPOKE8(sd, SDCTRL, 0x40);
> -+ sd->sd_state = DATSSP_4BIT;
> -+
> -+ sd->sd_rcaarg = ~sd->sdboot_token;
> -+ sdcmd(sd, CMD_DESELECT_CARD, ~sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, CMD_SEND_CSD, sd->sd_rcaarg, sd->sd_csd, NULL);
> -+ sdcmd(sd, CMD_SELECT_CARD, sd->sd_rcaarg, NULL, NULL);
> -+
> -+ if (sd->os_dmastream) SDPOKE8(sd, SDCTRL, 0x42);
> -+ if ((SDPEEK8(sd, SDCTRL) & 0x80) || (sd->sd_csd[15] & 0x30))
> -+ sd->sd_wprot = 1;
> -+ sd->sd_blocksize = 1 << ((sd->sd_csd[6] & 0xf));
> -+ if (timeout(sd)) return 0;
> -+ else return sdsize(sd);
> -+}
> -+
> -+static
> -+int sdreset2(struct sdcore *sd)
> -+{
> -+ unsigned int rca, s, i, x;
> -+ unsigned int resp[17];
> -+
> -+ reset_timeout(sd);
> -+ sd_initcrc(sd);
> -+ sd->parked_sector = 0;
> -+ sd->sd_wprot = 0;
> -+ sd->sd_blocksize = 0;
> -+ sd->sd_sz = 0;
> -+ if (sd->hw_version == 0) sd->hw_version = version(sd);
> -+ if (sd->hw_version == 0) return 0;
> -+ sd->sd_state &= SD_RESET;
> -+ remember_sdcore(sd);
> -+ activate(sd);
> -+ sd->sd_state |= SD_LOSPEED;
> -+
> -+ if (!(sd->sd_state & SD_RESET) && (SDPEEK8(sd, SDGPIO) != 0x0)) {
> -+ SDPOKE8(sd, SDGPIO, 0x0);
> -+#ifdef BIGENDIAN
> -+ for (i = 0; i < 8; i++) SDPOKE16(sd, SDLUN2, i << 8);
> -+#else
> -+ for (i = 0; i < 8; i++) SDPOKE16(sd, SDLUN2, i);
> -+#endif
> -+ sd->os_delay(sd->os_arg, 100000);
> -+
> -+ /* this was a global reset, so let the other luns know */
> -+ for (i = 0; i < sizeof(sdcores); i++) {
> -+ if (sdcores[i] == NULL) break;
> -+ if (sdcores[i]->sd_regstart == sd->sd_regstart)
> -+ sdcores[i]->sd_state |= SD_RESET;
> -+ }
> -+#ifdef BIGENDIAN
> -+ SDPOKE16(sd, SDLUN2, sd->sd_lun << 8);
> -+#else
> -+ SDPOKE16(sd, SDLUN2, sd->sd_lun);
> -+#endif
> -+ }
> -+ sd->sd_state &= ~SD_RESET;
> -+
> -+ // gratuitous clocks
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ sd->os_delay(sd->os_arg, 5000);
> -+ for (i = 0; i < 750; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO); /* delay */
> -+ SDPEEK8(sd, SDGPIO); /* delay */
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO); /* delay */
> -+ SDPEEK8(sd, SDGPIO); /* delay */
> -+ }
> -+
> -+ SDPEEK8(sd, SDSTAT2); /* reset any timeout/crc conditions */
> -+ SDPOKE8(sd, SDSTAT2, 0x18);
> -+ s = sdcmd2(sd, CMD_SEND_IF_COND, 0x1aa, resp, NULL);
> -+ if (s) {
> -+ reset_timeout(sd);
> -+ x = 0x00ff0000;
> -+ } else {
> -+ x = 0x40ff0000;
> -+ }
> -+
> -+ do {
> -+ sdcmd2(sd, CMD_APP_CMD, 0, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SD_SEND_OP_COND, x, resp, NULL);
> -+ if (timeout(sd)) break;
> -+ // TODO: check for valid result or limit # of loops,
> -+ // otherwise we may loop forever on malfunctioning cards.
> -+ } while (((resp[1] & 0x80) == 0x0));
> -+
> -+ if ((x & 0x40000000) && (resp[1] & 0x40)) {
> -+ sd->sd_state |= SD_HC;
> -+ }
> -+
> -+ sdcmd2(sd, CMD_ALL_SEND_CID, 0, resp, NULL);
> -+ sdcmd2(sd, CMD_SEND_RELATIVE_ADDR, 0, resp, NULL);
> -+ rca = resp[1] << 8 | resp[2];
> -+ sd->sd_rcaarg = (rca & 0xff00) << 16 | (rca & 0xff) << 16;
> -+ sd->sdboot_token = ~sd->sd_rcaarg;
> -+
> -+ sdcmd2(sd, CMD_SEND_CSD, sd->sd_rcaarg, sd->sd_csd, NULL);
> -+ sdcmd2(sd, CMD_SELECT_CARD, sd->sd_rcaarg, resp, NULL);
> -+
> -+ if ((resp[1] & 0x2)) {
> -+ unsigned int ret = 1;
> -+ sd->sd_locked = 1;
> -+#ifndef SD_NOLOCKSUPPORT
> -+ if (sd->sd_pwd)
> -+ ret = sdlockctl2(sd, SDLOCK_UNLOCK, sd->sd_pwd, NULL);
> -+#endif
> -+ if (ret != 0) return 0;
> -+ } else sd->sd_locked = 0;
> -+
> -+ sdcmd2(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SET_CLR_CARD_DETECT, 0, NULL, NULL);
> -+ sdcmd2(sd, CMD_SET_BLOCKLEN, 512, NULL, NULL);
> -+ sdcmd2(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SET_BUS_WIDTH, 2, resp, NULL);
> -+ sd->sd_state |= DATSSP_4BIT;
> -+ sd->sd_state &= ~SD_LOSPEED;
> -+
> -+ sdcmd2(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SEND_SCR2, 0, NULL, NULL);
> -+ do {
> -+ if (timeout(sd)) break;
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ s = SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ } while ((s & 0xf) != 0x0);
> -+ for (i = 0; i < 16; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ s = (SDPEEK8(sd, SDGPIO) & 0xf) << 4;
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ s |= (SDPEEK8(sd, SDGPIO) & 0xf);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ if (i < 8) sd->sd_scr[i] = s;
> -+ }
> -+ for (i = 0; i < 8; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ sd->sd_state &= ~SDDAT_RX;
> -+
> -+#ifndef SD_NOHIGHSPEED
> -+ if ((sd->sd_scr[0] & 0xf) >= 1) { // SD version >= 1.10
> -+ unsigned char dat[64];
> -+ sdcmd2(sd, CMD_SWITCH_FUNC2, 0x80fffff1, NULL, NULL);
> -+ do {
> -+ if (timeout(sd)) break;
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ s = SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ } while ((s & 0xf) != 0x0);
> -+ for (i = 0; i < 72; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ s = (SDPEEK8(sd, SDGPIO) & 0xf) << 4;
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ s |= (SDPEEK8(sd, SDGPIO) & 0xf);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ if (i < 64) dat[i] = s;
> -+ }
> -+ for (i = 0; i < 8; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0xdf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xff);
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ sd->sd_state &= ~SDDAT_RX;
> -+ if (dat[0] | dat[1]) {
> -+ SDPOKE8(sd, SDSTAT2, 0x38);
> -+ sd->sd_state |= SD_HISPEED;
> -+ }
> -+ }
> -+#endif
> -+
> -+#ifdef BIGENDIAN
> -+ if ((sd->sd_csd[15] & 0x30) || (SDPEEK16(sd, SDGPIO) & 0x2))
> -+#else
> -+ if ((sd->sd_csd[15] & 0x30) || (SDPEEK16(sd, SDGPIO) & 0x200))
> -+#endif
> -+ sd->sd_wprot = 1;
> -+ sd->sd_blocksize = 1 << ((sd->sd_csd[6] & 0xf));
> -+ if (timeout(sd)) return 0;
> -+ else {
> -+ reset_timeout(sd);
> -+ return sdsize(sd);
> -+ }
> -+}
> -+
> -+/*
> -+ * return 0 : 8 bit TS-SDCORE v1
> -+ * return 1 : 8 bit 4x8 TS-SDCORE v2
> -+ * return 2 : 32 bit 4x32 TS-SDCORE v2
> -+ * return 3 : 16 bit 4x32 TS-SDCORE v2
> -+ * return 4 : 8 bit 4x32 TS-SDCORE v2
> -+ */
> -+static int version(struct sdcore *sd)
> -+{
> -+ int a, b, i;
> -+
> -+
> -+#ifdef SD_FORCEVERSION
> -+ return SD_FORCEVERSION;
> -+#endif
> -+ for (i = 0; i < sizeof(sdcores); i++) {
> -+ if (sdcores[i] == NULL) break;
> -+ if (sdcores[i]->sd_regstart == sd->sd_regstart)
> -+ return sdcores[i]->hw_version;
> -+ }
> -+
> -+ a = SDPEEK8(sd, 3);
> -+ SDPOKE8(sd, 3, (a ^ 0x40));
> -+ b = SDPEEK8(sd, 3);
> -+ SDPOKE8(sd, 3, a);
> -+ if ((a & 0x40) ^ (b & 0x40)) return 0;
> -+ else if (a & 0x40) return 1;
> -+ /* either 2, 3, or 4 */
> -+ a = SDPEEK32(sd, 12);
> -+ b = SDPEEK16(sd, 12);
> -+#ifdef BIGENDIAN
> -+ if ((a & 0x40000000) && (b & 0x4000)) return 2;
> -+#else
> -+ if ((a & 0x40) && (b & 0x40)) return 2;
> -+#endif
> -+ a = SDPEEK8(sd, 12);
> -+ if (a & 0x40) return 3;
> -+ else return 4;
> -+}
> -+
> -+int sdreset(struct sdcore *sd)
> -+{
> -+ unsigned int rca, s, x;
> -+ unsigned int resp[17];
> -+
> -+ reset_timeout(sd);
> -+ sd_initcrc(sd);
> -+ sd->parked_sector = 0;
> -+ sd->sd_wprot = 0;
> -+ sd->sd_blocksize = 0;
> -+ sd->sd_sz = 0;
> -+
> -+ sd->hw_version = version(sd);
> -+ if (sd->hw_version >= 2) return sdreset2(sd);
> -+
> -+ // check for no SD card present
> -+ if (SDPEEK8(sd, SDCTRL) & 0x8) return 0;
> -+
> -+ if (sd->sdboot_token) {
> -+ int ret = sdfastinit(sd);
> -+ sd->sdboot_token = 0;
> -+ if (ret) return ret;
> -+ }
> -+
> -+ // set controller for 1-bit mode, slow clock
> -+ SDPOKE8(sd, SDCTRL, 0x20);
> -+
> -+ SDPOKE8(sd, SDSTATE, S_DUMMY_CLK);
> -+ sd->sd_state = SDCMD_RX|SDDAT_RX;
> -+ s = SDPEEK8(sd, SDSTATE);
> -+ while ((s & 0x7) != S_SEND_CMD) {
> -+ // If we timeout here, it would be VERY BAD as we have no
> -+ // further recourse to set things right if we can't turn
> -+ // the SD off.
> -+ if (timeout(sd)) return 0;
> -+ sd->os_delay(sd->os_arg, 10000);
> -+ sd->sd_timeout += 10000;
> -+
> -+ // We won't be able to change state until both SSPs are empty
> -+ s = tend_ssp(sd, NULL, NULL);
> -+ }
> -+ SDPOKE8(sd, SDSTATE, S_OFF);
> -+ sd->sd_state = 0;
> -+
> -+ sd->os_delay(sd->os_arg, 50000);
> -+
> -+ SDPOKE8(sd, SDSTATE, S_DUMMY_CLK);
> -+ sd->os_delay(sd->os_arg, 100000);
> -+ if ((SDPEEK8(sd, SDSTATE) & 0x7) == S_OFF) {
> -+ // No card present
> -+ return 0;
> -+ }
> -+
> -+ SDPOKE8(sd, SDSTATE, S_WAIT_RESP);
> -+ // clock will freerun waiting for a response that will never come
> -+ sd->os_delay(sd->os_arg, 50000);
> -+
> -+ SDPOKE8(sd, SDSTATE, S_DUMMY_CLK);
> -+
> -+ s = sdcmd(sd, CMD_SEND_IF_COND, 0x1aa, resp, NULL);
> -+ if (s) {
> -+ reset_timeout(sd);
> -+ SDPOKE8(sd, SDSTATE, S_DUMMY_CLK);
> -+ x = 0x00ff0000;
> -+ } else {
> -+ x = 0x40ff0000;
> -+ }
> -+
> -+ do {
> -+ sdcmd(sd, CMD_APP_CMD, 0, NULL, NULL);
> -+ sdcmd(sd, ACMD_SD_SEND_OP_COND, x, resp, NULL);
> -+ if (timeout(sd)) break;
> -+ } while (((resp[1] & 0x80) == 0x0));
> -+
> -+ if ((x & 0x40000000) && (resp[1] & 0x40)) sd->sd_state |= SD_HC;
> -+
> -+ sdcmd(sd, CMD_ALL_SEND_CID, 0, resp, NULL);
> -+ sdcmd(sd, CMD_SEND_RELATIVE_ADDR, 0, resp, NULL);
> -+ rca = resp[1] << 8 | resp[2];
> -+ sd->sd_rcaarg = (rca & 0xff00) << 16 | (rca & 0xff) << 16;
> -+ sd->sdboot_token = ~sd->sd_rcaarg;
> -+
> -+ sdcmd(sd, CMD_SEND_CSD, sd->sd_rcaarg, sd->sd_csd, NULL);
> -+ sdcmd(sd, CMD_SELECT_CARD, sd->sd_rcaarg, resp, NULL);
> -+
> -+ if ((resp[1] & 0x2)) {
> -+ unsigned int ret = 1;
> -+ sd->sd_locked = 1;
> -+#ifndef SD_NOLOCKSUPPORT
> -+ if (sd->sd_pwd)
> -+ ret = sdlockctl(sd, SDLOCK_UNLOCK, sd->sd_pwd, NULL);
> -+#endif
> -+ if (ret != 0) return 0;
> -+ } else sd->sd_locked = 0;
> -+
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SET_CLR_CARD_DETECT, 0, NULL, NULL);
> -+ /*
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SEND_SCR, 0, NULL, &datptr);
> -+ while ((datptr - sd->sd_scr) != 8) {
> -+ if (timeout(sd)) return 1;
> -+ tend_ssp(sd, NULL, &datptr);
> -+ }
> -+ datssp_stream(sd, NULL, 3);
> -+ SDPOKE8(sd, SDSTATE, (TYPE_ABORT << 5) | S_SEND_CMD);
> -+ sd->sd_state |= SDCMD_RX|SDDAT_RX;
> -+ while ((SDPEEK8(sd, SDSTATE) & 0x17) != S_SEND_CMD) {
> -+ if (timeout(sd)) break;
> -+ tend_ssp(sd, NULL, NULL);
> -+ }
> -+ sd->sd_state &= ~(SDCMD_RX|SDDAT_RX);
> -+ if ((sd->sd_scr[0] & 0xf) >= 1) { // SD version >= 1.10
> -+ unsigned char dat[64];
> -+ datptr = dat;
> -+ sdcmd(sd, CMD_SWITCH_FUNC, 0x80fffff1, NULL, &datptr);
> -+ while ((datptr - dat) != 64) {
> -+ if (timeout(sd)) break;
> -+ tend_ssp(sd, NULL, &datptr);
> -+ }
> -+ datssp_stream(sd, NULL, 3);
> -+ SDPOKE8(sd, SDSTATE, (TYPE_ABORT << 5) | S_SEND_CMD);
> -+ sd->sd_state |= SDCMD_RX|SDDAT_RX;
> -+ while ((SDPEEK8(sd, SDSTATE) & 0x7) != S_SEND_CMD) {
> -+ if (timeout(sd)) break;
> -+ tend_ssp(sd, NULL, NULL);
> -+ }
> -+ sd->sd_state &= ~(SDCMD_RX|SDDAT_RX);
> -+ }
> -+ */
> -+
> -+ sdcmd(sd, CMD_SET_BLOCKLEN, 512, NULL, NULL);
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SET_BUS_WIDTH, 2, resp, NULL);
> -+
> -+ // set controller for 4-bit mode, fast clock
> -+ SDPOKE8(sd, SDCTRL, (0x40 | (sd->os_dmastream ? 0x2 : 0x0)));
> -+ sd->sd_state |= DATSSP_4BIT;
> -+
> -+ /*
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SEND_SCR, 0, NULL, &datptr);
> -+ while ((datptr - sd->sd_scr) != 8) {
> -+ if (timeout(sd)) break;
> -+ tend_ssp(sd, NULL, &datptr);
> -+ }
> -+ datssp_stream(sd, NULL, 6);
> -+ SDPOKE8(sd, SDSTATE, S_DUMMY_CLK | (TYPE_SHORTRESP << 5));
> -+ bzero(resp, 6 * 4);
> -+ sdcmd(sd, CMD_SEND_STATUS, 0, resp, NULL);
> -+ */
> -+
> -+ if ((SDPEEK8(sd, SDCTRL) & 0x80) || (sd->sd_csd[15] & 0x30))
> -+ sd->sd_wprot = 1;
> -+ sd->sd_blocksize = 1 << ((sd->sd_csd[6] & 0xf));
> -+ if (timeout(sd) || error(resp, ACMD_SET_BUS_WIDTH)) return 0;
> -+ else return sdsize(sd);
> -+}
> -+
> -+static
> -+int sdread2(struct sdcore *sd, unsigned int sector, unsigned char *dat,
> -+ int nsectors)
> -+{
> -+ struct sdiov iov;
> -+ int ret;
> -+
> -+ iov.sdiov_base = dat;
> -+ iov.sdiov_nsect = nsectors;
> -+ ret = do_read2(sd, sector, &iov, 1);
> -+ return ret;
> -+}
> -+
> -+int sdread(struct sdcore *sd, unsigned int sector, unsigned char *dat,
> -+ int nsectors)
> -+{
> -+ struct sdiov iov;
> -+ int ret;
> -+
> -+ iov.sdiov_base = dat;
> -+ iov.sdiov_nsect = nsectors;
> -+ if (sd->hw_version == 0) ret = do_read(sd, sector, &iov, 1);
> -+ else ret = do_read2(sd, sector, &iov, 1);
> -+ return ret;
> -+}
> -+
> -+int sdwrite(struct sdcore *sd, unsigned int sector, unsigned char *dat,
> -+ int nsectors)
> -+{
> -+ struct sdiov iov;
> -+ unsigned int ret;
> -+
> -+ iov.sdiov_base = dat;
> -+ iov.sdiov_nsect = nsectors;
> -+ if (sd->hw_version == 0) ret = do_write(sd, sector, &iov, 1);
> -+ else ret = do_write2(sd, sector, &iov, 1);
> -+ return ret;
> -+
> -+}
> -+
> -+int sdreadv(struct sdcore *sd, unsigned int sector, struct sdiov *iov,
> -+ int niov)
> -+{
> -+ if (sd->hw_version == 0) return do_read(sd, sector, iov, niov);
> -+ else return do_read2(sd, sector, iov, niov);
> -+}
> -+
> -+int sdwritev(struct sdcore *sd, unsigned int sector, struct sdiov *iov,
> -+ int niov)
> -+{
> -+ if (sd->hw_version == 0) return do_write(sd, sector, iov, niov);
> -+ else return do_write2(sd, sector, iov, niov);
> -+}
> -+
> -+static
> -+int sdsetwprot2(struct sdcore *sd, unsigned int perm)
> -+{
> -+ int i, ret, s;
> -+ unsigned int csd[16], resp[6];
> -+ unsigned char csdchars[16];
> -+ unsigned char *csdptr = csdchars;
> -+
> -+ stop2(sd);
> -+
> -+ perm = perm ? 0x3 : 0x1;
> -+ for (i = 0; i < 16; i++) csd[i] = sd->sd_csd[i + 1];
> -+ csd[14] &= ~(0x3 << 4);
> -+ csd[14] |= (perm << 4);
> -+ csd[15] = 0x1 | crc7(0, csd, 15) << 1;
> -+ for (i = 0; i < 16; i++) csdchars[i] = csd[i];
> -+
> -+ ret = sdcmd2(sd, CMD_PROGRAM_CSD, 0, resp, NULL);
> -+ if (ret || error(resp, CMD_PROGRAM_CSD)) return 1;
> -+ for (i = 0; i < 16; i++) {
> -+ s = *csdptr++;
> -+ sd_4bit_feedcrc(sd, s);
> -+ SDPOKE8(sd, SDGPIO, (0x10|((s & 0xf0) >> 4)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, (0x30|((s & 0xf0) >> 4)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, (0x10|(s & 0xf)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, (0x30|(s & 0xf)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ for (i = 0; i < 8; i++) {
> -+ s = sd_4bit_getcrc(sd);
> -+ SDPOKE8(sd, SDGPIO, (0x10|((s & 0xf0) >> 4)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, (0x30|((s & 0xf0) >> 4)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, (0x10|(s & 0xf)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, (0x30|(s & 0xf)));
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ // End bit
> -+ SDPOKE8(sd, SDGPIO, 0x1f);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0x3f);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xbf); // tristate dat
> -+ // CRC ack
> -+ s = 0;
> -+ for (i = 0; i < 7; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0x9f); // clk negedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ s = s << 1;
> -+ s |= (SDPEEK8(sd, SDGPIO) & 0x1);
> -+ SDPOKE8(sd, SDGPIO, 0xbf); // clk posedge
> -+ }
> -+ if ((s & 0xf) != 0x5) return 1;
> -+ // wait for unbusy
> -+ s = 0;
> -+ while ((s & 0x7) != 0x7) {
> -+ if (timeout(sd)) break;
> -+ SDPOKE8(sd, SDGPIO, 0x9f); // clk negedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ s = s << 1;
> -+ s |= SDPEEK8(sd, SDGPIO) & 0x1;
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+ }
> -+ for (i = 0; i < 8; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0x9f);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ sd->sd_state &= ~SDDAT_TX;
> -+
> -+ sdcmd2(sd, CMD_DESELECT_CARD, ~sd->sd_rcaarg, NULL, NULL);
> -+ ret = sdcmd2(sd, CMD_SEND_CSD, sd->sd_rcaarg, sd->sd_csd, NULL);
> -+ if (ret || sd->sd_csd[15] != csd[14]) {
> -+ return 1;
> -+ }
> -+ sdcmd2(sd, CMD_SELECT_CARD, sd->sd_rcaarg, resp, NULL);
> -+
> -+ sd->sd_wprot = 1;
> -+ return 0;
> -+}
> -+
> -+int sdsetwprot(struct sdcore *sd, unsigned int perm)
> -+{
> -+ int i, ret;
> -+ unsigned int csd[16], resp[6];
> -+ unsigned char csdchars[16];
> -+ unsigned char *csdptr = csdchars;
> -+
> -+ if (sd->hw_version) return sdsetwprot2(sd, perm);
> -+
> -+ if (stop(sd)) return 1;
> -+
> -+ perm = perm ? 0x3 : 0x1;
> -+ for (i = 0; i < 16; i++) csd[i] = sd->sd_csd[i + 1];
> -+ csd[14] &= ~(0x3 << 4);
> -+ csd[14] |= (perm << 4);
> -+ csd[15] = 0x1 | crc7(0, csd, 15) << 1;
> -+ for (i = 0; i < 16; i++) csdchars[i] = csd[i];
> -+
> -+ ret = sdcmd(sd, CMD_PROGRAM_CSD, 0, resp, NULL);
> -+ if (ret || error(resp, CMD_PROGRAM_CSD)) return 1;
> -+ datssp_stream(sd, &csdptr, 16);
> -+ datssp_stream(sd, NULL, 8);
> -+ SDPOKE8(sd, SDSTATE, S_CRC_CHECK | (TYPE_BSYRESP << 5));
> -+ sd->sd_state &= ~SDDAT_TX;
> -+
> -+ sdcmd(sd, CMD_DESELECT_CARD, ~sd->sd_rcaarg, NULL, NULL);
> -+ ret = sdcmd(sd, CMD_SEND_CSD, sd->sd_rcaarg, sd->sd_csd, NULL);
> -+ if (ret || sd->sd_csd[15] != csd[14]) {
> -+ return 1;
> -+ }
> -+ sdcmd(sd, CMD_SELECT_CARD, sd->sd_rcaarg, resp, NULL);
> -+
> -+ sd->sd_wprot = 1;
> -+ return 0;
> -+}
> -+
> -+#ifndef SD_NOLOCKSUPPORT
> -+int sdlockctl(struct sdcore *sd, unsigned int cmd, unsigned char *pwd,
> -+ unsigned char *sdbootdat)
> -+{
> -+ unsigned char pwddat[18];
> -+ unsigned char *pwdptr = pwddat;
> -+ unsigned int resp[6];
> -+ int ret, i, len;
> -+ int ccc = (sd->sd_csd[5] << 4) | (sd->sd_csd[6] >> 4);
> -+
> -+ if (sd->hw_version) return sdlockctl2(sd, cmd, pwd, sdbootdat);
> -+
> -+ if (!(ccc & 0x80)) return 1; // Class 7 is lock-unlock commands
> -+
> -+ if (pwd == NULL && cmd != SDLOCK_ERASE) return 1;
> -+
> -+ if (stop(sd)) return 1;
> -+
> -+ if (sd->sd_state & DATSSP_4BIT) {
> -+ int oldctrl = SDPEEK8(sd, SDCTRL);
> -+ int ret;
> -+
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SET_BUS_WIDTH, 0, NULL, NULL);
> -+ SDPOKE8(sd, SDCTRL, 0x20);
> -+ sd->sd_state &= ~DATSSP_4BIT;
> -+ ret = sdlockctl(sd, cmd, pwd, sdbootdat);
> -+ sdcmd(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd(sd, ACMD_SET_BUS_WIDTH, 2, NULL, NULL);
> -+ sd->sd_state |= DATSSP_4BIT;
> -+ SDPOKE8(sd, SDCTRL, oldctrl);
> -+ return ret;
> -+ }
> -+
> -+ pwddat[0] = cmd;
> -+ if (cmd != SDLOCK_ERASE) {
> -+ pwddat[1] = 16; // length
> -+ for (i = 0; i < 16; i++) {
> -+ pwddat[2 + i] = pwd[i];
> -+ }
> -+ }
> -+
> -+ if (cmd == SDLOCK_ERASE) len = 1; else len = 18;
> -+ ret = sdcmd(sd, CMD_SET_BLOCKLEN, len, resp, NULL);
> -+ if (ret || error(resp, CMD_SET_BLOCKLEN)) return 1;
> -+ ret = sdcmd(sd, CMD_LOCK_UNLOCK, 0, resp, NULL);
> -+ if (ret || error(resp, CMD_LOCK_UNLOCK)) return 1;
> -+
> -+ while ((pwdptr - pwddat) != len) {
> -+ if (timeout(sd)) return 1;
> -+ tend_ssp(sd, NULL, &pwdptr);
> -+ }
> -+
> -+ if (sd->sd_state & DATSSP_4BIT) datssp_stream(sd, NULL, 8);
> -+ else datssp_stream(sd, NULL, 2);
> -+
> -+ SDPOKE8(sd, SDSTATE, S_CRC_CHECK | (TYPE_BSYRESP << 5));
> -+ sd->sd_state &= ~SDDAT_TX;
> -+ ret = sdcmd(sd, CMD_SET_BLOCKLEN, 512, resp, NULL);
> -+ if (ret || error(resp, CMD_SET_BLOCKLEN)) return 1;
> -+ ret = sdcmd(sd, CMD_SEND_STATUS, sd->sd_rcaarg, resp, NULL);
> -+ if (ret || error(resp, CMD_SEND_STATUS)) return 1;
> -+
> -+ if ((cmd == SDLOCK_ERASE || cmd == SDLOCK_UNLOCK ||
> -+ cmd == SDLOCK_CLRPWD) && (resp[1] & 0x2)) {
> -+ return 1;
> -+ }
> -+
> -+ if (sdbootdat) {
> -+ sdbootdat[0] = SDLOCK_UNLOCK;
> -+ for (i = 1; i < 18; i++) {
> -+ sdbootdat[i] = pwddat[i];
> -+ sd_1bit_feedcrc(sd, pwddat[i]);
> -+ }
> -+ sdbootdat[18] = sd_1bit_getcrc(sd);
> -+ sdbootdat[19] = sd_1bit_getcrc(sd);
> -+ }
> -+
> -+ return 0;
> -+}
> -+
> -+static
> -+int sdlockctl2(struct sdcore *sd, unsigned int cmd, unsigned char *pwd,
> -+ unsigned char *sdbootdat)
> -+{
> -+ unsigned char pwddat[18];
> -+ unsigned char *pwdptr = pwddat;
> -+ unsigned int resp[6];
> -+ int ret, i, j, len, s;
> -+ int ccc = (sd->sd_csd[5] << 4) | (sd->sd_csd[6] >> 4);
> -+
> -+ if (!(ccc & 0x80)) return 1; // Class 7 is lock-unlock commands
> -+
> -+ if (pwd == NULL && cmd != SDLOCK_ERASE) return 1;
> -+
> -+ stop2(sd);
> -+
> -+ if (sd->sd_state & DATSSP_4BIT) {
> -+ int ret;
> -+
> -+ sdcmd2(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SET_BUS_WIDTH, 0, NULL, NULL);
> -+ sd->sd_state &= ~DATSSP_4BIT;
> -+ ret = sdlockctl2(sd, cmd, pwd, sdbootdat);
> -+ sdcmd2(sd, CMD_APP_CMD, sd->sd_rcaarg, NULL, NULL);
> -+ sdcmd2(sd, ACMD_SET_BUS_WIDTH, 2, NULL, NULL);
> -+ sd->sd_state |= DATSSP_4BIT;
> -+ return ret;
> -+ }
> -+
> -+ pwddat[0] = cmd;
> -+ if (cmd != SDLOCK_ERASE) {
> -+ pwddat[1] = 16; // length
> -+ for (i = 0; i < 16; i++) {
> -+ pwddat[2 + i] = pwd[i];
> -+ }
> -+ }
> -+
> -+ if (cmd == SDLOCK_ERASE) len = 1; else len = 18;
> -+ ret = sdcmd2(sd, CMD_SET_BLOCKLEN, len, resp, NULL);
> -+ if (ret || error(resp, CMD_SET_BLOCKLEN)) return 1;
> -+ ret = sdcmd2(sd, CMD_LOCK_UNLOCK, 0, resp, NULL);
> -+ if (ret || error(resp, CMD_LOCK_UNLOCK)) return 1;
> -+
> -+ for (i = 0; i < len; i++) {
> -+ unsigned int b = *pwdptr++;
> -+ unsigned int x;
> -+
> -+ sd_1bit_feedcrc(sd, b);
> -+ for (j = 0; j < 8; j++) {
> -+ x = 0x1e | ((b >> 7) & 0x1);
> -+ b = b << 1;
> -+ SDPOKE8(sd, SDGPIO, x); // clk negedge
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ x |= 0x20;
> -+ SDPOKE8(sd, SDGPIO, x); // clk posedge
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ }
> -+ for (i = 0; i < 2; i++) {
> -+ unsigned int b = sd_1bit_getcrc(sd);
> -+ unsigned int x;
> -+
> -+ for (j = 0; j < 8; j++) {
> -+ x = 0x1e | ((b >> 7) & 0x1);
> -+ b = b << 1;
> -+ SDPOKE8(sd, SDGPIO, x); // clk negedge
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ x |= 0x20;
> -+ SDPOKE8(sd, SDGPIO, x); // clk posedge
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ }
> -+ // End bit
> -+ SDPOKE8(sd, SDGPIO, 0x1f); // clk negedge
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xbf); // clk posedge, tristate dat
> -+ // CRC ack
> -+ s = 0;
> -+ for (i = 0; i < 7; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0x9f); // clk negedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ s = s << 1;
> -+ s |= SDPEEK8(sd, SDGPIO) & 0x1;
> -+ SDPOKE8(sd, SDGPIO, 0xbf); // clk posedge
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ if ((s & 0xf) != 0x5) return 1;
> -+
> -+ // wait for unbusy
> -+ s = 0;
> -+ while ((s & 0x7) != 0x7) {
> -+ if (timeout(sd)) break;
> -+ SDPOKE8(sd, SDGPIO, 0x9f); // clk negedge
> -+ SDPEEK8(sd, SDGPIO); // delay
> -+ s = s << 1;
> -+ s |= SDPEEK8(sd, SDGPIO) & 0x1;
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ for (i = 0; i < 8; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0x9f);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+
> -+ sd->sd_state &= ~SDDAT_TX;
> -+ ret = sdcmd2(sd, CMD_SET_BLOCKLEN, 512, resp, NULL);
> -+ if (ret || error(resp, CMD_SET_BLOCKLEN)) {
> -+ return 1;
> -+ }
> -+ ret = sdcmd2(sd, CMD_SEND_STATUS, sd->sd_rcaarg, resp, NULL);
> -+ if (ret || error(resp, CMD_SEND_STATUS)) {
> -+ return 1;
> -+ }
> -+
> -+ if ((cmd == SDLOCK_ERASE || cmd == SDLOCK_UNLOCK ||
> -+ cmd == SDLOCK_CLRPWD) && (resp[1] & 0x2)) {
> -+ return 1;
> -+ }
> -+
> -+ if (sdbootdat) {
> -+ sdbootdat[0] = SDLOCK_UNLOCK;
> -+ for (i = 1; i < 18; i++) {
> -+ sdbootdat[i] = pwddat[i];
> -+ sd_1bit_feedcrc(sd, pwddat[i]);
> -+ }
> -+ sdbootdat[18] = sd_1bit_getcrc(sd);
> -+ sdbootdat[19] = sd_1bit_getcrc(sd);
> -+ }
> -+
> -+ for (i = 0; i < 8; i++) {
> -+ SDPOKE8(sd, SDGPIO, 0x9f);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPEEK8(sd, SDGPIO);
> -+ SDPOKE8(sd, SDGPIO, 0xbf);
> -+ SDPEEK8(sd, SDGPIO);
> -+ }
> -+ return 0;
> -+}
> -+#endif
> -diff --git a/drivers/block/sdcore2.h b/drivers/block/sdcore2.h
> -new file mode 100644
> -index 0000000..38d5b96
> ---- /dev/null
> -+++ b/drivers/block/sdcore2.h
> -@@ -0,0 +1,372 @@
> -+/*
> -+ * Copyright (c) 2006-2008, Technologic Systems
> -+ * All rights reserved.
> -+ */
> -+
> -+#ifndef _SDCORE_H_
> -+#define _SDCORE_H_
> -+
> -+// Additional missing defs
> -+#define SDCMD 0 // cmd register
> -+#define SDDAT 1 // data register
> -+#define SDSTATE 2 // state register
> -+#define SDCTRL 3 // ctrl register
> -+
> -+
> -+// this bit is set when no card inserted
> -+#define SDCTRL_CARD_ABSENT 0x08
> -+
> -+
> -+
> -+/* public bits for sd_state bitfield, can be read from client code.
> -+ * Do not write! Other bits are used internally.
> -+ */
> -+#define SDDAT_RX (1<<0)
> -+#define SDDAT_TX (1<<1)
> -+#define SDCMD_RX (1<<2)
> -+#define SDCMD_TX (1<<3)
> -+
> -+// used to disable CRC calculations in write mode
> -+#define SDCRC_DISABLE (1 << 4)
> -+
> -+
> -+
> -+// used to choose between 4 bit crc mode and 1 bit crc mode
> -+
> -+// note - likely set in sdreset when configuring interface bit width
> -+#define SDSSP_4BIT_MODE (1 << 5)
> -+
> -+// SD_ADDRESSING_DIRECT means that sd card addresses
> -+// will be communicated in read/write mode using
> -+// full offsets, not 512 byte block offsets.
> -+// the core will mulitply the address by 512 if this
> -+// bit is cleared
> -+#define SD_ADDRESSING_DIRECT (1 << 6)
> -+
> -+
> -+/* These structs should start intialized to all 0's (bzero()'ed). Proper
> -+ * operation can be assured by setting sd_regstart, and the os_delay
> -+ * callback. sdreset() should be called to initialize the core, then
> -+ * sdread() and sdwrite() can be used.
> -+ */
> -+struct sdcore {
> -+ /* virtual address of SD block register start, to be filled in
> -+ * by client code before calling any sdcore functions.
> -+ */
> -+ // 0-3
> -+ unsigned char* sd_regstart;
> -+
> -+
> -+
> -+ // 4-7
> -+ unsigned int sd_state;
> -+
> -+ /* Erase hint for subsequent sdwrite() call, used to optimize
> -+ * write throughput on multi-sector writes by pre-erasing this
> -+ * many sectors.
> -+ */
> -+ // 8-11
> -+ unsigned int sd_erasehint;
> -+
> -+ /* Following this comment are 5 function pointer declarations to
> -+ * OS helper functions. The 'os_arg' member is passed as the
> -+ * first argument to the helpers and should be set by
> -+ * client code before issueing sdreset()
> -+ *
> -+ * os_dmastream(os_arg, buf, buflen)
> -+ * This function should look at sd_state and set up and run an
> -+ * appropriate DMA transfer. If buf is NULL, callee doesn't care
> -+ * about the actual data sent/received and helper function
> -+ * can do whatever it wants. Should return 0 when DMA transfer was
> -+ * run and completed successfully. If this function pointer is
> -+ * NULL, PIO methods of transfer will be used instead of DMA.
> -+ *
> -+ * os_dmaprep(os_arg, buf, buflen)
> -+ * This function is used to prepare an area of memory for a possible
> -+ * DMA transfer. This function is called once per distinct buffer
> -+ * passed in. After this function is called, os_dmastream() may be
> -+ * called one or more times (for sequential addresses) on subregions
> -+ * of the address range passed here. Should write-back or invalidate
> -+ * L1 cache lines and possibly look up physical addresses for buf
> -+ * passed in if I/O buffers. If 'os_dmaprep' is set to NULL, function
> -+ * call will not happen. (though os_dmastream() calls may still)
> -+ *
> -+ * os_delay(os_arg, microseconds)
> -+ * This function is supposed to delay or stall the processor for
> -+ * the passed in value number of microseconds.
> -+ *
> -+ * os_irqwait(os_arg, type)
> -+ * Called at certain times to request to be put to sleep/block until
> -+ * an SD interrupt occurs. It is not critical to set this function.
> -+ * When NULL, the sdcore routines simply busy-wait.
> -+ *
> -+ * os_powerok(os_arg)
> -+ * Experimental callback function -- set to NULL for now.
> -+ */
> -+ // 12-15
> -+ void *os_arg;
> -+ // 16-19
> -+ int (*os_dmastream)(void *, unsigned char *, unsigned int);
> -+ // 20-23
> -+ void (*os_dmaprep)(void *, unsigned char *, unsigned int);
> -+ // 24-27
> -+ void (*os_delay)(void *, unsigned int);
> -+ // 28-31
> -+ void (*os_irqwait)(void *, unsigned int);
> -+ // 32-35
> -+ int (*os_powerok)(void *);
> -+
> -+ int (*os_timeout)(void *);
> -+ int (*os_reset_timeout)(void *);
> -+
> -+ /* If the SD card last successfully reset is write protected, this
> -+ * member will be non-zero.
> -+ */
> -+ // 36-39
> -+ unsigned int sd_wprot;
> -+
> -+ /* If this card may have been already initialized by TS-SDBOOT, place
> -+ * the magic token it placed in the EP93xx SYSCON ScratchReg1 here
> -+ * before calling sdreset() to avoid re-initialization.
> -+ */
> -+ // 40-43
> -+ unsigned int sdboot_token;
> -+
> -+ /* CRC hint for subsequent sdwrite() call, used to optimize
> -+ * write throughput while using DMA by pre-calculating CRC's for
> -+ * next write. NULL means no hint supplied.
> -+ */
> -+ // 44-47
> -+ unsigned char *sd_crchint;
> -+
> -+ /* The block size of the memory device. Normally 512, but can be 1024
> -+ * for larger cards. Read-only member and actually not very useful.
> -+ */
> -+ // 48-51
> -+ unsigned int sd_blocksize;
> -+
> -+ /* Password for auto-unlocking in sdreset()
> -+ */
> -+ // 52-55
> -+ unsigned char *sd_pwd;
> -+
> -+ /* If the SD card was password locked, this will be non-zero after
> -+ * unsuccessful sdreset().
> -+ */
> -+ // 56-59
> -+ unsigned int sd_locked;
> -+
> -+ /* Whether or not writes can be parked. Definitely should be set to 1
> -+ * as writes are very slow without it.
> -+ */
> -+ // 60-63
> -+ unsigned int sd_writeparking;
> -+
> -+ /* Logical unit number. Some SD cores will have multiple card slots.
> -+ * LUN #0 is the first.
> -+ */
> -+ // 64-67
> -+ unsigned int sd_lun;
> -+
> -+ /* The rest of these members are for private internal use and should
> -+ * not be of interest to client code.
> -+ */
> -+
> -+
> -+ // 68-71
> -+ unsigned int rca; // relative card address
> -+
> -+
> -+ unsigned int sd_csd[17];
> -+ /*
> -+
> -+
> -+ // 72 -75 0
> -+ unsigned int unknown72; // one of the csds?
> -+
> -+ // 76 -79 1
> -+ unsigned int unknown76; // csd 0x00
> -+ // 80 -83 2
> -+ unsigned int unknown04; // csd 0x01
> -+ // 84 - 87 3
> -+ unsigned int unknown05; // csd 0x02
> -+ // 88 - 91 4
> -+ unsigned int unknown06; // csd 0x03
> -+ // 92 - 95 5
> -+ unsigned int unknown92; // csd 0x04
> -+ // 96 - 100 6
> -+ unsigned int unknown96; // csd 0x05
> -+ // 100 - 103 7
> -+ unsigned int unknown100; // csd 0x06
> -+ // 104 - 107 8
> -+ unsigned int unknown104; // csd 0x07
> -+ // 108 - 111 9
> -+ unsigned int unknown108; // csd 0x08
> -+ // 112 - 115 10
> -+ unsigned int unknown112; // csd 0x09
> -+ // 116 - 119 11
> -+ unsigned int unknown116; // csd 0x0a
> -+ // 120 12
> -+ unsigned int unknown24; // csd 0x0b
> -+ // 124 13
> -+ unsigned int unknown25; // csd 0x0c
> -+ // 128 14
> -+ unsigned int unknown26; // csd 0x0d
> -+ // 132 15
> -+ unsigned int unknown132; // csd 0x0e
> -+ // 136 16
> -+ unsigned int unknown28; // csd 0x0f
> -+ */
> -+
> -+
> -+ // 140
> -+ unsigned int sd_crc_shift;
> -+
> -+ // 144 + 4 + 4
> -+ unsigned short s_crc_table[4]; // 4 shorts
> -+ // 152 + 4 + 4 + 4 + 4
> -+ unsigned int l_crc_table[4]; // 4 longs
> -+
> -+ // 168
> -+ unsigned int sd_timeout; // used to busy wait
> -+
> -+ // 172
> -+ unsigned int sd_cur_sector; // stop indicator - if zero , then stop procedure will be skipped
> -+
> -+ // 176
> -+ unsigned int sdcore_version; // hardware version
> -+ // 180
> -+ unsigned int unknown39;
> -+ // 184
> -+ unsigned int unknown40;
> -+ // 188
> -+ unsigned int sdcore_sdsize;
> -+
> -+
> -+
> -+ unsigned int unknown42;
> -+ unsigned int unknown43;
> -+ unsigned int unknown44;
> -+ unsigned int unknown45;
> -+ unsigned int unknown46;
> -+ unsigned int unknown47;
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+
> -+};
> -+
> -+/* I believe sdcores is a table mapping
> -+ id -> sdcore struct. The table is
> -+ 64 long, meaning that one could build a ts device with
> -+ 64 sdcores on it.
> -+*/
> -+//extern unsigned char sdcores[256];
> -+
> -+
> -+
> -+
> -+/* For sdreadv() / sdwritev() */
> -+struct sdiov {
> -+ unsigned char *sdiov_base;
> -+ unsigned int sdiov_nsect;
> -+};
> -+
> -+
> -+
> -+
> -+int sdreset(struct sdcore *);
> -+
> -+int sdsize(struct sdcore* sdcore);
> -+
> -+
> -+int sdread(struct sdcore* sdcore,
> -+ unsigned int sector,
> -+ unsigned char* buffer,
> -+ int nsect);
> -+
> -+int sdwrite(struct sdcore *, unsigned int, unsigned char *, int);
> -+
> -+
> -+// same signature as do_read
> -+int do_read(struct sdcore*, unsigned int, struct sdiov*, int);
> -+int sdreadv(struct sdcore * sdcore,
> -+ unsigned int sector,
> -+ struct sdiov * sdiov,
> -+ int nsdiov);
> -+
> -+// same signature as do_write
> -+int do_write(struct sdcore* sdcore,
> -+ unsigned int sector,
> -+ struct sdiov* sdiov,
> -+ int nsdiov);
> -+
> -+int sdwritev(struct sdcore *, unsigned int, struct sdiov *, int);
> -+
> -+
> -+void sd_1bit_feedcrc(struct sdcore*, unsigned int);
> -+void sd_4bit_feedcrc(struct sdcore*, unsigned int);
> -+
> -+unsigned char sd_1bit_getcrc(struct sdcore*);
> -+unsigned char sd_4bit_getcrc(struct sdcore*);
> -+
> -+/** stop takes only sdcore parameters */
> -+int stop(struct sdcore*);
> -+
> -+
> -+int tend_ssp(struct sdcore* sdcore,
> -+ unsigned int** unknown_r1, // r1
> -+ unsigned char** unknown_r2);
> -+
> -+
> -+int datssp_stream(struct sdcore* sdcore,
> -+ unsigned char** data,
> -+ int count);
> -+
> -+/*
> -+ * @param cmd is the command - I believe that the lower byte is the command, and
> -+ * the upper one is the crc
> -+ *
> -+ * @param data is a character buffer for data received in the ssp dat register, as
> -+ * a result of a command execution.
> -+ */
> -+
> -+int sdcmd(struct sdcore* sdcore,
> -+ unsigned short cmd,
> -+ unsigned int sdargs,
> -+ unsigned int* response,
> -+ unsigned char** data); // command response buffer?
> -+
> -+
> -+/**
> -+ * Error tests if a sdcommand error has been received.
> -+ * It does this by checking that the command was
> -+ * correctly returned by the card (the first byte in buffer),
> -+ * and that a CRC error has not occurred. IF one has occurred
> -+ * it will attempt a 1bit fix. (suspected)
> -+ */
> -+int error(unsigned int* buffer, unsigned int cmd);
> -+
> -+
> -+
> -+int sdsetwprot(struct sdcore *, unsigned int);
> -+#define SDLOCK_UNLOCK 0
> -+#define SDLOCK_SETPWD 1
> -+#define SDLOCK_CLRPWD 2
> -+#define SDLOCK_ERASE 8
> -+
> -+int sdlockctl(struct sdcore *,
> -+ unsigned int, // op code
> -+ unsigned char *,
> -+ unsigned char *);
> -+
> -+#endif
> -diff --git a/drivers/block/tssdcard.c b/drivers/block/tssdcard.c
> -new file mode 100644
> -index 0000000..c76d9a7
> ---- /dev/null
> -+++ b/drivers/block/tssdcard.c
> -@@ -0,0 +1,415 @@
> -+/*
> -+ * TS SD Card device driver
> -+ *
> -+ * (c) Copyright 2010 Matthieu Crapet <mcrapet at gmail.com>
> -+ * Based on Technologic Systems & Breton M. Saunders work
> -+ *
> -+ * This program is free software; you can redistribute it and/or
> -+ * modify it under the terms of the GNU General Public License
> -+ * as published by the Free Software Foundation; either version
> -+ * 2 of the License, or (at your option) any later version.
> -+ *
> -+ * Notes:
> -+ * - request processing method is: no request queue
> -+ * - no M2M DMA is used
> -+ */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <linux/module.h>
> -+#include <linux/moduleparam.h>
> -+#include <linux/major.h>
> -+#include <linux/blkdev.h>
> -+#include <linux/bio.h>
> -+#include <linux/delay.h>
> -+#include <linux/hdreg.h>
> -+#include <linux/slab.h>
> -+#include <linux/platform_device.h>
> -+
> -+#include "sdcore2.h"
> -+
> -+#define SDCARD_DEV_NAME "tssd" /* will appear in /proc/partitions & /sys/class/block */
> -+#define SD_SHIFT 4 /* max 16 partitions = 1 << 4 */
> -+
> -+#define KERN_SECTOR_SIZE 512 /* in bytes */
> -+#define HARD_SECTOR_SIZE 512 /* in bytes */
> -+#define HARD_2_KERN_SECTOR_RATIO 1 /* 1 kernel sector = 1 hardware sector */
> -+
> -+
> -+struct ts72xx_sdcard_device {
> -+ struct sdcore tssdcore; /* Physical core layer */
> -+ void __iomem *mmio_base;
> -+ long size; /* Device size in (hardware) sectors */
> -+ int id;
> -+ int media_change;
> -+ int users;
> -+
> -+ spinlock_t lock;
> -+ struct device *dev;
> -+ struct request_queue *queue;
> -+ struct gendisk *disk;
> -+};
> -+
> -+
> -+/*
> -+ * Low level function to handle an I/O request
> -+ */
> -+static inline int sdcard_ll_transfer(struct ts72xx_sdcard_device *dev,
> -+ unsigned long sector, unsigned long nsect, char *buffer, int rw)
> -+{
> -+ int ret;
> -+
> -+ //spin_unlock(&dev->lock); // ???
> -+
> -+ if ((sector + nsect) > (dev->size * HARD_2_KERN_SECTOR_RATIO)) {
> -+ dev_err(dev->dev, "tranfer: beyond-end write (%ld %ld)\n", sector, nsect);
> -+ //spin_lock(&dev->lock); // ???
> -+ return -1;
> -+ }
> -+
> -+ switch (rw) {
> -+ case WRITE:
> -+ ret = sdwrite(&dev->tssdcore, sector, buffer, nsect);
> -+ if (ret && !dev->tssdcore.sd_wprot) {
> -+ sdreset(&dev->tssdcore);
> -+ ret = sdwrite(&dev->tssdcore, sector, buffer, nsect);
> -+ }
> -+ break;
> -+
> -+ case READ:
> -+ case READA:
> -+ ret = sdread(&dev->tssdcore, sector, buffer, nsect);
> -+ if (ret) {
> -+ // SDCARD RESET may be printed when the core determines that the SD card has
> -+ // f*ed up.this is not handled correctly yet; and should likely be inside a while loop
> -+ dev_err(dev->dev, "transfer: SDCARD RESET\n");
> -+ sdreset(&dev->tssdcore);
> -+ ret = sdread(&dev->tssdcore, sector, buffer, nsect);
> -+ }
> -+ break;
> -+ }
> -+
> -+ //spin_lock(&dev->lock); // ???
> -+ return 0;
> -+}
> -+
> -+/*
> -+ * The direct make request version.
> -+ */
> -+static int sdcard_make_request(struct request_queue *q, struct bio *bio)
> -+{
> -+ struct ts72xx_sdcard_device *dev = q->queuedata;
> -+
> -+ struct bio_vec *bvec;
> -+ sector_t sector;
> -+ int i, rw;
> -+ int err = -EIO;
> -+
> -+ /* handle bio */
> -+ sector = bio->bi_sector;
> -+ rw = bio_rw(bio);
> -+
> -+ bio_for_each_segment(bvec, bio, i) {
> -+ char *buffer = __bio_kmap_atomic(bio, i, KM_USER0);
> -+ unsigned int len = bvec->bv_len / HARD_SECTOR_SIZE;
> -+
> -+ //printk("bvec: len=%d offt=%d page=%p\n", bvec->bv_len, bvec->bv_offset, bvec->bv_page);
> -+
> -+ err = sdcard_ll_transfer(dev, sector, len, buffer, rw);
> -+ if (err)
> -+ break;
> -+
> -+ sector += len;
> -+ __bio_kunmap_atomic(bio, KM_USER0);
> -+ }
> -+ bio_endio(bio, err);
> -+
> -+ return 0;
> -+}
> -+
> -+static void sdcard_delay(void *arg, unsigned int us)
> -+{
> -+ udelay(us);
> -+}
> -+
> -+static int sdcard_open(struct block_device *bdev, fmode_t mode)
> -+{
> -+ struct ts72xx_sdcard_device *dev = bdev->bd_disk->private_data;
> -+ unsigned long flags;
> -+
> -+ dev_dbg(dev->dev, "open() users=%i\n", dev->users + 1);
> -+
> -+ spin_lock_irqsave(&dev->lock, flags);
> -+ dev->users++;
> -+ spin_unlock_irqrestore(&dev->lock, flags);
> -+
> -+ check_disk_change(bdev);
> -+ return 0;
> -+};
> -+
> -+static int sdcard_release(struct gendisk *disk, fmode_t mode)
> -+{
> -+ struct ts72xx_sdcard_device *dev = disk->private_data;
> -+ unsigned long flags;
> -+
> -+ dev_dbg(dev->dev, "release() users=%i\n", dev->users - 1);
> -+
> -+ spin_lock_irqsave(&dev->lock, flags);
> -+ dev->users--;
> -+ spin_unlock_irqrestore(&dev->lock, flags);
> -+
> -+ return 0;
> -+}
> -+
> -+static int sdcard_media_changed(struct gendisk *disk)
> -+{
> -+ struct ts72xx_sdcard_device *dev = disk->private_data;
> -+
> -+ char buf[HARD_SECTOR_SIZE];
> -+ dev->media_change = sdread(&dev->tssdcore, 1, buf, 1);
> -+
> -+ dev_dbg(dev->dev, "media_changed() %i\n", dev->media_change);
> -+ return dev->media_change;
> -+}
> -+
> -+static int sdcard_revalidate(struct gendisk *disk)
> -+{
> -+ struct ts72xx_sdcard_device *dev = disk->private_data;
> -+ int ret = 0;
> -+
> -+ dev_dbg(dev->dev, "revalidate() %i\n", dev->media_change);
> -+ if (dev->media_change) {
> -+ dev->size = sdreset(&dev->tssdcore);
> -+ set_disk_ro(dev->disk, !!(dev->tssdcore.sd_wprot));
> -+ if (dev->size > 0) {
> -+ set_capacity(dev->disk, dev->size * HARD_2_KERN_SECTOR_RATIO);
> -+ dev->media_change = 0;
> -+ } else {
> -+ dev_err(dev->dev, "revalidate() no card found\n");
> -+ ret = -1;
> -+ }
> -+ }
> -+ return ret;
> -+}
> -+
> -+static int sdcard_getgeo(struct block_device *bdev, struct hd_geometry *geo)
> -+{
> -+ struct gendisk *disk = bdev->bd_disk;
> -+ struct ts72xx_sdcard_device *dev = disk->private_data;
> -+
> -+ /* We don't have real geometry info, but let's at least return
> -+ * values consistent with the size of the device */
> -+ geo->heads = 16;
> -+ geo->sectors = 32;
> -+ geo->cylinders = get_capacity(disk) / (16 * 32);
> -+
> -+ dev_dbg(dev->dev, "getgeo() %d heads, %d sectors, %d cylinders\n",
> -+ geo->heads, geo->sectors, geo->cylinders);
> -+ return 0;
> -+}
> -+
> -+/*
> -+ * The device operations structure.
> -+ */
> -+static struct block_device_operations ts72xx_sdcard_ops = {
> -+ .owner = THIS_MODULE,
> -+ .open = sdcard_open,
> -+ .release = sdcard_release,
> -+ .media_changed = sdcard_media_changed,
> -+ .revalidate_disk = sdcard_revalidate,
> -+ .getgeo = sdcard_getgeo
> -+};
> -+
> -+static int sdcard_major;
> -+
> -+/* ---------------------------------------------------------------------
> -+ * Device setup
> -+ */
> -+
> -+static int ts72xx_sdcard_setup(const char *name, struct ts72xx_sdcard_device *dev)
> -+{
> -+ int rc;
> -+
> -+ spin_lock_init(&dev->lock);
> -+
> -+ /*
> -+ * Initialize the request queue
> -+ */
> -+ dev->queue = blk_alloc_queue(GFP_KERNEL);
> -+ if (!dev->queue)
> -+ goto err_alloc_queue;
> -+
> -+ dev->queue->queuedata = dev;
> -+ blk_queue_make_request(dev->queue, sdcard_make_request);
> -+ blk_queue_logical_block_size(dev->queue, HARD_SECTOR_SIZE);
> -+
> -+ dev->tssdcore.sd_regstart = (unsigned char *)dev->mmio_base;
> -+ dev->tssdcore.os_arg = dev;
> -+ dev->tssdcore.os_delay = sdcard_delay;
> -+ dev->tssdcore.os_dmastream = NULL;
> -+ dev->tssdcore.os_dmaprep = NULL;
> -+
> -+ // don't want to write park
> -+ dev->tssdcore.sd_writeparking = 1;
> -+ // I do want to pre-erase blocks - 8 blocks pre-erase
> -+ dev->tssdcore.sd_erasehint = 8;
> -+ dev->tssdcore.sdboot_token = 0;
> -+
> -+ dev->disk = alloc_disk(1 << SD_SHIFT);
> -+ if (!dev->disk) {
> -+ goto err_alloc_disk;
> -+ }
> -+
> -+ dev->disk->major = sdcard_major;
> -+ dev->disk->first_minor = dev->id << SD_SHIFT;
> -+ dev->disk->flags = GENHD_FL_REMOVABLE;
> -+ dev->disk->fops = &ts72xx_sdcard_ops;
> -+ dev->disk->queue = dev->queue;
> -+ dev->disk->private_data = dev;
> -+ snprintf(dev->disk->disk_name, 32, SDCARD_DEV_NAME "%c", dev->id + 'a');
> -+
> -+ /* SD Card size and Reset
> -+ * (set_disk_ro, set_capacity will be called) */
> -+ dev->media_change = 1;
> -+ rc = sdcard_revalidate(dev->disk);
> -+ if (rc) {
> -+ dev_info(dev->dev, "No SD card detected!\n");
> -+ goto err_alloc_disk;
> -+ }
> -+
> -+ dev_info(dev->dev, "SD card hardware revision: %08x\n",
> -+ dev->tssdcore.sdcore_version);
> -+ dev_info(dev->dev, "block device major number = %d\n",
> -+ sdcard_major);
> -+ dev_info(dev->dev, "New SD card detected, name=%s size=%ld (sectors)\n",
> -+ dev->disk->disk_name, dev->size);
> -+
> -+ /* Make the sysace device 'live' */
> -+ add_disk(dev->disk);
> -+
> -+ return 0;
> -+
> -+err_alloc_disk:
> -+ blk_cleanup_queue(dev->queue);
> -+err_alloc_queue:
> -+ return -ENOMEM;
> -+}
> -+
> -+
> -+/* ---------------------------------------------------------------------
> -+ * Platform drivers functons
> -+ */
> -+
> -+static int __init ts72xx_sdcard_probe(struct platform_device *pdev)
> -+{
> -+ struct ts72xx_sdcard_device *dev;
> -+ struct resource *res;
> -+ int rc;
> -+
> -+ dev = kzalloc(sizeof(struct ts72xx_sdcard_device), GFP_KERNEL);
> -+ if (!dev) {
> -+ rc = -ENOMEM;
> -+ goto fail_no_mem;
> -+ }
> -+
> -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -+ if (res == NULL) {
> -+ rc = -ENXIO;
> -+ goto fail_no_mem_resource;
> -+ }
> -+
> -+ res = request_mem_region(res->start, resource_size(res), pdev->name);
> -+ if (res == NULL) {
> -+ rc = -EBUSY;
> -+ goto fail_no_mem_resource;
> -+ }
> -+
> -+ dev->mmio_base = ioremap(res->start, resource_size(res));
> -+ if (dev->mmio_base == NULL) {
> -+ rc = -ENXIO;
> -+ goto fail_no_ioremap;
> -+ }
> -+
> -+ dev->dev = &pdev->dev;
> -+ dev->id = pdev->id;
> -+ platform_set_drvdata(pdev, dev);
> -+
> -+ rc = ts72xx_sdcard_setup(SDCARD_DEV_NAME, dev);
> -+ if (rc) {
> -+ dev_err(dev->dev, "ts72xx_sdcard_setup failed\n");
> -+ goto fail_sdcard_setup;
> -+ }
> -+
> -+ return 0;
> -+
> -+fail_sdcard_setup:
> -+ iounmap(dev->mmio_base);
> -+fail_no_ioremap:
> -+ release_mem_region(res->start, resource_size(res));
> -+fail_no_mem_resource:
> -+ kfree(dev);
> -+fail_no_mem:
> -+ return rc;
> -+}
> -+
> -+static int __exit ts72xx_sdcard_remove(struct platform_device *pdev)
> -+{
> -+ struct ts72xx_sdcard_device *dev = platform_get_drvdata(pdev);
> -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -+
> -+ platform_set_drvdata(pdev, NULL);
> -+ iounmap(dev->mmio_base);
> -+ release_mem_region(res->start, resource_size(res));
> -+ blk_cleanup_queue(dev->queue);
> -+ del_gendisk(dev->disk);
> -+ put_disk(dev->disk);
> -+ kfree(dev);
> -+
> -+ return 0;
> -+}
> -+
> -+static struct platform_driver ts72xx_sdcard_driver = {
> -+ .driver = {
> -+ .name = "ts72xx-sdcard",
> -+ .owner = THIS_MODULE,
> -+ },
> -+ .remove = __exit_p(ts72xx_sdcard_remove),
> -+};
> -+
> -+
> -+/* ---------------------------------------------------------------------
> -+ * Module init/exit routines
> -+ */
> -+
> -+static int __init ts72xx_sdcard_init(void)
> -+{
> -+ int rc;
> -+
> -+ sdcard_major = rc = register_blkdev(sdcard_major, SDCARD_DEV_NAME);
> -+ if (rc <= 0) {
> -+ printk(KERN_ERR "%s:%u: register_blkdev failed %d\n", __func__,
> -+ __LINE__, rc);
> -+ return rc;
> -+ }
> -+
> -+ rc = platform_driver_probe(&ts72xx_sdcard_driver, ts72xx_sdcard_probe);
> -+ if (rc)
> -+ unregister_blkdev(sdcard_major, SDCARD_DEV_NAME);
> -+
> -+ return rc;
> -+}
> -+
> -+static void __exit ts72xx_sdcard_exit(void)
> -+{
> -+ unregister_blkdev(sdcard_major, SDCARD_DEV_NAME);
> -+ platform_driver_unregister(&ts72xx_sdcard_driver);
> -+}
> -+
> -+module_init(ts72xx_sdcard_init);
> -+module_exit(ts72xx_sdcard_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("TS72xx SD Card block driver");
> -+MODULE_LICENSE("GPL");
> -+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
> -+MODULE_ALIAS("tssd");
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0016-ts72xx_spi_tmp124.patch b/recipes/linux/linux-2.6.36/ts72xx/0016-ts72xx_spi_tmp124.patch
> deleted file mode 100644
> index 0099c91..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0016-ts72xx_spi_tmp124.patch
> +++ /dev/null
> @@ -1,305 +0,0 @@
> -From 6e1298e3647a7eea65fe323ee0181ab2373fd78d Mon Sep 17 00:00:00 2001
> -From: Matthieu Crapet <mcrapet at gmail.com>
> -Date: Tue, 22 Jun 2010 15:48:27 +0200
> -Subject: [PATCH 16/24] ts72xx_spi_tmp124
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -It's an option. A 3-wire spi temperature sensor can be populated on TS-72XX sbc.
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/ts72xx.c | 63 ++++++++++++++++
> - drivers/spi/Kconfig | 7 ++
> - drivers/spi/Makefile | 1 +
> - drivers/spi/tmp124.c | 158 +++++++++++++++++++++++++++++++++++++++++
> - 4 files changed, 229 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/spi/tmp124.c
> -
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index c99f112..941eeac 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -23,7 +23,11 @@
> - #include <linux/gpio.h>
> - #include <linux/i2c.h>
> - #include <linux/i2c-gpio.h>
> -+#include <linux/mtd/nand.h>
> -+#include <linux/mtd/partitions.h>
> -+#include <linux/spi/spi.h>
> -
> -+#include <mach/ep93xx_spi.h>
> - #include <mach/hardware.h>
> - #include <mach/ts72xx.h>
> -
> -@@ -352,6 +356,60 @@ static struct i2c_gpio_platform_data ts72xx_i2c_gpio_data = {
> - static struct i2c_board_info __initdata ts72xx_i2c_board_info[] = {
> - };
> -
> -+/*************************************************************************
> -+ * SPI
> -+ *************************************************************************/
> -+#if defined(CONFIG_SPI_TMP124) || defined(CONFIG_SPI_TMP124_MODULE)
> -+
> -+/* this is our GPIO line used for chip select */
> -+#define TMP124_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_MCCD2
> -+
> -+static int ts72xx_tmp124_setup(struct spi_device *spi)
> -+{
> -+ int err;
> -+
> -+ err = gpio_request(TMP124_CHIP_SELECT_GPIO, spi->modalias);
> -+ if (err)
> -+ return err;
> -+
> -+ gpio_direction_output(TMP124_CHIP_SELECT_GPIO, 1);
> -+
> -+ return 0;
> -+}
> -+
> -+static void ts72xx_tmp124_cleanup(struct spi_device *spi)
> -+{
> -+ gpio_set_value(TMP124_CHIP_SELECT_GPIO, 1);
> -+ gpio_direction_input(TMP124_CHIP_SELECT_GPIO);
> -+ gpio_free(TMP124_CHIP_SELECT_GPIO);
> -+}
> -+
> -+static void ts72xx_tmp124_cs_control(struct spi_device *spi, int value)
> -+{
> -+ gpio_set_value(TMP124_CHIP_SELECT_GPIO, value);
> -+}
> -+
> -+static struct ep93xx_spi_chip_ops ts72xx_tmp124_ops = {
> -+ .setup = ts72xx_tmp124_setup,
> -+ .cleanup = ts72xx_tmp124_cleanup,
> -+ .cs_control = ts72xx_tmp124_cs_control,
> -+};
> -+
> -+static struct spi_board_info ts72xx_spi_devices[] = {
> -+ {
> -+ .modalias = "tmp124",
> -+ .max_speed_hz = 2 * 1000 * 1000,
> -+ .bus_num = 0,
> -+ .chip_select = 0,
> -+ .controller_data = &ts72xx_tmp124_ops,
> -+ },
> -+};
> -+
> -+static struct ep93xx_spi_info ts72xx_spi_info = {
> -+ .num_chipselect = ARRAY_SIZE(ts72xx_spi_devices),
> -+};
> -+#endif
> -+
> - static void __init ts72xx_init_machine(void)
> - {
> - ep93xx_init_devices();
> -@@ -365,6 +423,11 @@ static void __init ts72xx_init_machine(void)
> - ts72xx_i2c_board_info,
> - ARRAY_SIZE(ts72xx_i2c_board_info));
> -
> -+ #if defined(CONFIG_SPI_TMP124) || defined(CONFIG_SPI_TMP124_MODULE)
> -+ ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
> -+ ARRAY_SIZE(ts72xx_spi_devices));
> -+ #endif
> -+
> - if (is_max197_installed()) {
> - platform_device_register(&ts72xx_max197_device);
> - }
> -diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> -index 91c2f4f..05b78ca 100644
> ---- a/drivers/spi/Kconfig
> -+++ b/drivers/spi/Kconfig
> -@@ -379,6 +379,13 @@ config SPI_TLE62X0
> - sysfs interface, with each line presented as a kind of GPIO
> - exposing both switch control and diagnostic feedback.
> -
> -+config SPI_TMP124
> -+ tristate "Texas Instruments TMP1224, TMP124"
> -+ depends on SPI_MASTER && SYSFS
> -+ help
> -+ SPI driver for TMP12X temperature sensor chips.
> -+ This provides a sysfs entry for temperature reading (2�C accurate).
> -+
> - #
> - # Add new SPI protocol masters in alphabetical order above this line
> - #
> -diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> -index e9cbd18..c8f85ea 100644
> ---- a/drivers/spi/Makefile
> -+++ b/drivers/spi/Makefile
> -@@ -57,6 +57,7 @@ spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o
> - # SPI protocol drivers (device/link on bus)
> - obj-$(CONFIG_SPI_SPIDEV) += spidev.o
> - obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o
> -+obj-$(CONFIG_SPI_TMP124) += tmp124.o
> - # ... add above this line ...
> -
> - # SPI slave controller drivers (upstream link)
> -diff --git a/drivers/spi/tmp124.c b/drivers/spi/tmp124.c
> -new file mode 100644
> -index 0000000..e41ec8c
> ---- /dev/null
> -+++ b/drivers/spi/tmp124.c
> -@@ -0,0 +1,158 @@
> -+/*
> -+ * TMP124 SPI protocol driver
> -+ *
> -+ * (c) Copyright 2008-2010 Matthieu Crapet <mcrapet at gmail.com>
> -+ * Based on tle62x0.c by Ben Dooks, <ben at simtec.co.uk>
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * Note: The chip uses a '3-wire SPI' (miso and mosi are the same pin).
> -+ */
> -+
> -+#include <linux/module.h>
> -+#include <linux/kernel.h>
> -+#include <linux/init.h>
> -+#include <linux/spi/spi.h>
> -+#include <linux/slab.h>
> -+#include <linux/sched.h>
> -+
> -+struct tmp124_state {
> -+ struct spi_device *bus;
> -+ u8 tx_buff[2];
> -+ u8 rx_buff[2];
> -+};
> -+
> -+static inline int tmp124_write_then_read(struct tmp124_state *st)
> -+{
> -+ struct spi_message msg;
> -+ struct spi_transfer xfer[2] = {
> -+ {
> -+ .tx_buf = st->tx_buff,
> -+ .rx_buf = NULL,
> -+ .len = 2,
> -+ }, {
> -+ .tx_buf = NULL,
> -+ .rx_buf = st->rx_buff,
> -+ .len = 2,
> -+ }
> -+ };
> -+
> -+ spi_message_init(&msg);
> -+ spi_message_add_tail(&xfer[0], &msg);
> -+ spi_sync(st->bus, &msg);
> -+
> -+ /* SPI_3WIRE is not handled by ep93xx_spi, the 2 messages must be
> -+ * splitted. We must wait to not confuse driver with read/write. */
> -+ schedule_timeout(usecs_to_jiffies(1000));
> -+
> -+ spi_message_init(&msg);
> -+ spi_message_add_tail(&xfer[1], &msg);
> -+ return spi_sync(st->bus, &msg);
> -+}
> -+
> -+static ssize_t tmp124_temperature_show(struct device *dev,
> -+ struct device_attribute *attr, char *buf)
> -+{
> -+ struct tmp124_state *st = dev_get_drvdata(dev);
> -+ int ret;
> -+
> -+ ((short *)st->tx_buff)[0] = 0x8000;
> -+
> -+ ret = tmp124_write_then_read(st);
> -+ if (ret < 0) {
> -+ dev_err(&st->bus->dev, "tmp124_write_then_read\n");
> -+ ret = 0;
> -+ } else {
> -+ signed long val = ((short *)st->rx_buff)[0];
> -+
> -+ val = val >> 3;
> -+
> -+ /* 2 digit precision (0.0625*100) */
> -+ val = (val * 50) / 8;
> -+ ret = snprintf(buf, PAGE_SIZE, "%ld.%02ld\n", val/100, abs(val%100));
> -+ }
> -+ return ret;
> -+}
> -+
> -+static DEVICE_ATTR(temperature, S_IRUGO, tmp124_temperature_show, NULL);
> -+
> -+static int __devinit tmp124_probe(struct spi_device *spi)
> -+{
> -+ struct tmp124_state *st;
> -+ int ret;
> -+
> -+ st = kzalloc(sizeof(struct tmp124_state), GFP_KERNEL);
> -+ if (st == NULL) {
> -+ dev_err(&spi->dev, "no memory for device state\n");
> -+ return -ENOMEM;
> -+ }
> -+
> -+ /* required config */
> -+ spi->bits_per_word = 16;
> -+ spi->mode = SPI_MODE_0;
> -+
> -+ ret = spi_setup(spi);
> -+ if (ret) {
> -+ dev_err(&spi->dev, "setup device\n");
> -+ goto err;
> -+ }
> -+
> -+ ret = device_create_file(&spi->dev, &dev_attr_temperature);
> -+ if (ret) {
> -+ dev_err(&spi->dev, "cannot create temperature attribute\n");
> -+ goto err;
> -+ }
> -+
> -+ st->bus = spi;
> -+ spi_set_drvdata(spi, st);
> -+ return 0;
> -+
> -+err:
> -+ kfree(st);
> -+ return ret;
> -+}
> -+
> -+static int __devexit tmp124_remove(struct spi_device *spi)
> -+{
> -+ struct tmp124_state *st = spi_get_drvdata(spi);
> -+
> -+ device_remove_file(&spi->dev, &dev_attr_temperature);
> -+ kfree(st);
> -+ return 0;
> -+}
> -+
> -+static struct spi_driver tmp124_driver = {
> -+ .driver = {
> -+ .name = "tmp124",
> -+ .owner = THIS_MODULE,
> -+ },
> -+ .probe = tmp124_probe,
> -+ .remove = __devexit_p(tmp124_remove),
> -+};
> -+
> -+static __init int tmp124_init(void)
> -+{
> -+ return spi_register_driver(&tmp124_driver);
> -+}
> -+
> -+static __exit void tmp124_exit(void)
> -+{
> -+ spi_unregister_driver(&tmp124_driver);
> -+}
> -+
> -+module_init(tmp124_init);
> -+module_exit(tmp124_exit);
> -+
> -+MODULE_AUTHOR("Matthieu Crapet <mcrapet at gmail.com>");
> -+MODULE_DESCRIPTION("TMP124 SPI Protocol Driver");
> -+MODULE_LICENSE("GPL");
> -+MODULE_ALIAS("spi:tmp124");
> -+MODULE_VERSION("0.2");
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0017-ts72xx-use-CPLD-watchdog-for-reset.patch b/recipes/linux/linux-2.6.36/ts72xx/0017-ts72xx-use-CPLD-watchdog-for-reset.patch
> deleted file mode 100644
> index 0d844bf..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0017-ts72xx-use-CPLD-watchdog-for-reset.patch
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -From dc31543df131eeeadf4f36fbca25b89eeda1de53 Mon Sep 17 00:00:00 2001
> -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz at true.cz>
> -Date: Thu, 21 Oct 2010 20:00:49 +0200
> -Subject: [PATCH 17/24] ts72xx: use CPLD watchdog for reset
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/include/mach/system.h | 13 +++++++++++++
> - 1 files changed, 13 insertions(+), 0 deletions(-)
> -
> -diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
> -index 6d661fe..b657a9a 100644
> ---- a/arch/arm/mach-ep93xx/include/mach/system.h
> -+++ b/arch/arm/mach-ep93xx/include/mach/system.h
> -@@ -3,6 +3,10 @@
> - */
> -
> - #include <mach/hardware.h>
> -+#ifdef CONFIG_MACH_TS72XX
> -+#include <linux/io.h>
> -+#include <mach/ts72xx.h>
> -+#endif
> -
> - static inline void arch_idle(void)
> - {
> -@@ -13,11 +17,20 @@ static inline void arch_reset(char mode, const char *cmd)
> - {
> - local_irq_disable();
> -
> -+#ifdef CONFIG_MACH_TS72XX
> -+ /* It's more reliable to use CPLD watchdog to perform reset */
> -+ if (board_is_ts7200() || board_is_ts7250() || board_is_ts7260() ||
> -+ board_is_ts7300() || board_is_ts7400()) {
> -+ __raw_writeb(0x5, TS72XX_WDT_FEED_PHYS_BASE);
> -+ __raw_writeb(0x1, TS72XX_WDT_CONTROL_PHYS_BASE);
> -+ }
> -+#else
> - /*
> - * Set then clear the SWRST bit to initiate a software reset
> - */
> - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
> - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
> -+#endif
> -
> - while (1)
> - ;
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0018-ethoc-ts7300-fixes.patch b/recipes/linux/linux-2.6.36/ts72xx/0018-ethoc-ts7300-fixes.patch
> deleted file mode 100644
> index 3d5fd84..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0018-ethoc-ts7300-fixes.patch
> +++ /dev/null
> @@ -1,93 +0,0 @@
> -From 65cd401ec17f4a9791297e413e5954f25c71b2b0 Mon Sep 17 00:00:00 2001
> -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz at true.cz>
> -Date: Sat, 23 Oct 2010 19:49:21 +0200
> -Subject: [PATCH 18/24] ethoc: ts7300 fixes
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Ian Thompson <ian.thompson at pgs.com>
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - drivers/net/ethoc.c | 27 ++++++++++++++++++++-------
> - 1 files changed, 20 insertions(+), 7 deletions(-)
> -
> -diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
> -index 6d653c4..a0f62eb 100644
> ---- a/drivers/net/ethoc.c
> -+++ b/drivers/net/ethoc.c
> -@@ -21,7 +21,11 @@
> - #include <linux/slab.h>
> - #include <net/ethoc.h>
> -
> -+#ifndef CONFIG_MACH_TS72XX
> - static int buffer_size = 0x8000; /* 32 KBytes */
> -+#else
> -+static int buffer_size = 0x2000; /* 8 KBytes */
> -+#endif
> - module_param(buffer_size, int, 0);
> - MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
> -
> -@@ -525,11 +529,6 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
> -
> - ethoc_ack_irq(priv, pending);
> -
> -- if (pending & INT_MASK_BUSY) {
> -- dev_err(&dev->dev, "packet dropped\n");
> -- dev->stats.rx_dropped++;
> -- }
> --
> - if (pending & INT_MASK_RX) {
> - if (napi_schedule_prep(&priv->napi))
> - __napi_schedule(&priv->napi);
> -@@ -834,10 +833,10 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
> - bd.stat &= ~TX_BD_PAD;
> -
> - dest = priv->vma[entry];
> -- memcpy_toio(dest, skb->data, skb->len);
> -+ memcpy_toio(dest, skb->data, skb->len + 2);
> -
> - bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
> -- bd.stat |= TX_BD_LEN(skb->len);
> -+ bd.stat |= TX_BD_LEN(skb->len + 2);
> - ethoc_write_bd(priv, entry, &bd);
> -
> - bd.stat |= TX_BD_READY;
> -@@ -992,6 +991,8 @@ static int __devinit ethoc_probe(struct platform_device *pdev)
> - (struct ethoc_platform_data *)pdev->dev.platform_data;
> - memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN);
> - priv->phy_id = pdata->phy_id;
> -+ } else {
> -+ priv->phy_id = 1;
> - }
> -
> - /* Check that the given MAC address is valid. If it isn't, read the
> -@@ -1004,6 +1005,17 @@ static int __devinit ethoc_probe(struct platform_device *pdev)
> - if (!is_valid_ether_addr(netdev->dev_addr))
> - random_ether_addr(netdev->dev_addr);
> -
> -+ /* take this out for more general usage */
> -+ netdev->dev_addr[0] = 0x00;
> -+ netdev->dev_addr[1] = 0x88;
> -+ netdev->dev_addr[2] = 0x88;
> -+ netdev->dev_addr[3] = 0x88;
> -+ netdev->dev_addr[4] = 0x88;
> -+ netdev->dev_addr[5] = 0x01;
> -+
> -+ printk("ethoc: setting MAC address to %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",netdev->dev_addr[0],
> -+ netdev->dev_addr[1],netdev->dev_addr[2],netdev->dev_addr[3],netdev->dev_addr[4],
> -+ netdev->dev_addr[5]);
> - ethoc_set_mac_address(netdev, netdev->dev_addr);
> -
> - /* register MII bus */
> -@@ -1131,6 +1143,7 @@ static struct platform_driver ethoc_driver = {
> -
> - static int __init ethoc_init(void)
> - {
> -+ printk("ethoc driver with ts73xx fixes initialized\n");
> - return platform_driver_register(ðoc_driver);
> - }
> -
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0019-ts7300-add-ethernet-support.patch b/recipes/linux/linux-2.6.36/ts72xx/0019-ts7300-add-ethernet-support.patch
> deleted file mode 100644
> index 3895966..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0019-ts7300-add-ethernet-support.patch
> +++ /dev/null
> @@ -1,87 +0,0 @@
> -From 0945e8b61f170da6b5d249863f46eda5fdce3a7c Mon Sep 17 00:00:00 2001
> -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz at true.cz>
> -Date: Thu, 21 Oct 2010 11:51:44 +0200
> -Subject: [PATCH 19/24] ts7300: add ethernet support
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Ian Thompson <ian.thompson at pgs.com>
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/include/mach/ts72xx.h | 3 ++
> - arch/arm/mach-ep93xx/ts72xx.c | 30 ++++++++++++++++++++++++++++
> - 2 files changed, 33 insertions(+), 0 deletions(-)
> -
> -diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
> -index 1d50dec..beb3e3c 100644
> ---- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
> -+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
> -@@ -135,6 +135,9 @@
> -
> - #define TS7260_SDCARD_PHYS_BASE 0x13000000
> -
> -+#define TS7300_ETHOC_PHYS_BASE 0x72100000
> -+#define TS7300_ETHOC_IO_BASE 0x72102000
> -+
> - #ifndef __ASSEMBLY__
> -
> - static inline int board_is_ts7200(void)
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index 941eeac..0c07bd8 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -30,6 +30,7 @@
> - #include <mach/ep93xx_spi.h>
> - #include <mach/hardware.h>
> - #include <mach/ts72xx.h>
> -+#include <mach/irqs.h>
> -
> - #include <asm/mach-types.h>
> - #include <asm/mach/map.h>
> -@@ -341,6 +342,32 @@ static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
> - .phy_id = 1,
> - };
> -
> -+static struct resource ts7300_ethoc_resources[] = {
> -+ [0] = {
> -+ .start = TS7300_ETHOC_IO_BASE,
> -+ .end = TS7300_ETHOC_IO_BASE + 0x3FF,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [1] = {
> -+ .start = TS7300_ETHOC_PHYS_BASE,
> -+ .end = TS7300_ETHOC_PHYS_BASE + 0x1FFF,
> -+ .flags = IORESOURCE_MEM,
> -+ },
> -+ [2] = {
> -+ .start = IRQ_EP93XX_EXT3,
> -+ .end = IRQ_EP93XX_EXT3,
> -+ .flags = IORESOURCE_IRQ,
> -+ },
> -+};
> -+
> -+static struct platform_device ts7300_ethoc_device = {
> -+ .name = "ethoc",
> -+ .id = 0,
> -+ .num_resources = 3,
> -+ .resource = ts7300_ethoc_resources,
> -+};
> -+
> -+
> - /*************************************************************************
> - * I2C (make access through TS-72XX "DIO" 2x8 header)
> - *************************************************************************/
> -@@ -432,6 +459,9 @@ static void __init ts72xx_init_machine(void)
> - platform_device_register(&ts72xx_max197_device);
> - }
> -
> -+ if (board_is_ts7300())
> -+ platform_device_register(&ts7300_ethoc_device);
> -+
> - /* PWM1 is DIO_6 on TS-72xx header */
> - ep93xx_register_pwm(0, 1);
> - }
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0023-ts72xx-add-lcd-linux-driver.patch b/recipes/linux/linux-2.6.36/ts72xx/0023-ts72xx-add-lcd-linux-driver.patch
> deleted file mode 100644
> index 5fb3b01..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0023-ts72xx-add-lcd-linux-driver.patch
> +++ /dev/null
> @@ -1,4569 +0,0 @@
> -From 0e934482ba53c9d73dcbd3727da8f39da5dfa5ce Mon Sep 17 00:00:00 2001
> -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz at true.cz>
> -Date: Sun, 7 Nov 2010 14:41:41 +0100
> -Subject: [PATCH 23/24] ts72xx: add lcd-linux driver
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -- based on LCD-Linux v0.13.9 (latest stable release)
> -- supports only hd44780 compatible display
> -- LCD in 8-bit mode operation only (D0-D7) connected to LCD connector
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/Kconfig | 2 +
> - drivers/Makefile | 1 +
> - drivers/lcd-linux/Config.in | 8 +
> - drivers/lcd-linux/Kconfig | 33 +
> - drivers/lcd-linux/Makefile | 8 +
> - drivers/lcd-linux/cgram/default.h | 37 +
> - drivers/lcd-linux/cgram/swedish.h | 33 +
> - drivers/lcd-linux/charmap.h | 79 +
> - drivers/lcd-linux/commands.h | 77 +
> - drivers/lcd-linux/config.h | 73 +
> - drivers/lcd-linux/hd44780.c | 854 +++++++++++
> - drivers/lcd-linux/lcd-linux.c | 3023 +++++++++++++++++++++++++++++++++++++
> - include/linux/hd44780.h | 47 +
> - include/linux/lcd-linux.h | 158 ++
> - 14 files changed, 4433 insertions(+), 0 deletions(-)
> - create mode 100644 drivers/lcd-linux/Config.in
> - create mode 100644 drivers/lcd-linux/Kconfig
> - create mode 100644 drivers/lcd-linux/Makefile
> - create mode 100644 drivers/lcd-linux/cgram/default.h
> - create mode 100644 drivers/lcd-linux/cgram/swedish.h
> - create mode 100644 drivers/lcd-linux/charmap.h
> - create mode 100644 drivers/lcd-linux/commands.h
> - create mode 100644 drivers/lcd-linux/config.h
> - create mode 100644 drivers/lcd-linux/hd44780.c
> - create mode 100644 drivers/lcd-linux/lcd-linux.c
> - create mode 100644 include/linux/hd44780.h
> - create mode 100644 include/linux/lcd-linux.h
> -
> -diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> -index 8e6c85d..f1e0c4a 100644
> ---- a/arch/arm/Kconfig
> -+++ b/arch/arm/Kconfig
> -@@ -1802,6 +1802,8 @@ source "net/Kconfig"
> -
> - source "drivers/Kconfig"
> -
> -+source "drivers/lcd-linux/Kconfig"
> -+
> - source "fs/Kconfig"
> -
> - source "arch/arm/Kconfig.debug"
> -diff --git a/drivers/Makefile b/drivers/Makefile
> -index a2aea53..848a6f2 100644
> ---- a/drivers/Makefile
> -+++ b/drivers/Makefile
> -@@ -115,3 +115,4 @@ obj-$(CONFIG_VLYNQ) += vlynq/
> - obj-$(CONFIG_STAGING) += staging/
> - obj-y += platform/
> - obj-y += ieee802154/
> -+obj-$(CONFIG_LCD_LINUX) += lcd-linux/
> -diff --git a/drivers/lcd-linux/Config.in b/drivers/lcd-linux/Config.in
> -new file mode 100644
> -index 0000000..4a38801
> ---- /dev/null
> -+++ b/drivers/lcd-linux/Config.in
> -@@ -0,0 +1,8 @@
> -+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
> -+ mainmenu_option next_comment
> -+ comment 'LCD support'
> -+
> -+ tristate 'LCD-Linux layer' CONFIG_LCD_LINUX
> -+ dep_tristate ' HD44780 controller' CONFIG_LCD_HD44780 $CONFIG_LCD_LINUX
> -+ endmenu
> -+fi
> -diff --git a/drivers/lcd-linux/Kconfig b/drivers/lcd-linux/Kconfig
> -new file mode 100644
> -index 0000000..a102fc5
> ---- /dev/null
> -+++ b/drivers/lcd-linux/Kconfig
> -@@ -0,0 +1,33 @@
> -+menu "LCD support"
> -+ depends on EXPERIMENTAL
> -+
> -+config LCD_LINUX
> -+ tristate "LCD-Linux layer"
> -+ default n
> -+ help
> -+ LCD-Linux provides an easy way to drive LCD displays under
> -+ Linux by creating a character which can be read or written.
> -+ It features complete VT102 emulation and recognizes
> -+ many escape sequences. If you want to use it you must also
> -+ choose an appropriate driver, otherwise it will not be
> -+ very useful. For more information see
> -+ http://lcd-linux.sourceforge.net/
> -+
> -+ To compile LCD-Linux as a module, choose M here:
> -+ the module will be called lcd-linux.
> -+
> -+config LCD_HD44780
> -+ tristate "HD44780 controller"
> -+ depends on LCD_LINUX && MACH_TS72XX
> -+ default n
> -+ help
> -+ This is a LCD-Linux driver for LCD displays based on the
> -+ Hitachi HD44780 (and compatible) controllers connected
> -+ to LCD port on the TS72xx boards.
> -+
> -+ To compile this driver as a module, choose M here:
> -+ the module will be called hd44780.
> -+
> -+ If unsure, say N.
> -+
> -+endmenu
> -diff --git a/drivers/lcd-linux/Makefile b/drivers/lcd-linux/Makefile
> -new file mode 100644
> -index 0000000..079aa79
> ---- /dev/null
> -+++ b/drivers/lcd-linux/Makefile
> -@@ -0,0 +1,8 @@
> -+# $Id: Makefile-2.6,v 1.3 2006/12/13 15:53:00 mjona Exp $
> -+#
> -+# Standard Makefile to statically compile LCD-Linux into the kernel
> -+# Linux 2.6
> -+
> -+obj-$(CONFIG_LCD_LINUX) += lcd-linux.o
> -+obj-$(CONFIG_LCD_HD44780) += hd44780.o
> -+
> -diff --git a/drivers/lcd-linux/cgram/default.h b/drivers/lcd-linux/cgram/default.h
> -new file mode 100644
> -index 0000000..635146a
> ---- /dev/null
> -+++ b/drivers/lcd-linux/cgram/default.h
> -@@ -0,0 +1,37 @@
> -+/* default.h
> -+ *
> -+ * $Id: default.h,v 1.1.1.1 2005/08/23 13:30:14 mjona Exp $
> -+ *
> -+ * Default user defined characters for lcdmod.
> -+ *
> -+ * Copyright (C) by Michael McLellan (mikey at cs.auckland.ac.nz)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ *
> -+ */
> -+
> -+static void init_charmap(void)
> -+{
> -+}
> -+
> -+static unsigned char cg0[] = { 0x1f, 0x1f, 0x11, 0x0f, 0x11, 0x1e, 0x01, 0x1f };
> -+static unsigned char cg1[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f };
> -+static unsigned char cg2[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x1f };
> -+static unsigned char cg3[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x1f, 0x1f };
> -+static unsigned char cg4[] = { 0x00, 0x00, 0x00, 0x00, 0x1f, 0x1f, 0x1f, 0x1f };
> -+static unsigned char cg5[] = { 0x00, 0x00, 0x00, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f };
> -+static unsigned char cg6[] = { 0x00, 0x00, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f };
> -+static unsigned char cg7[] = { 0x00, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f };
> -diff --git a/drivers/lcd-linux/cgram/swedish.h b/drivers/lcd-linux/cgram/swedish.h
> -new file mode 100644
> -index 0000000..a92c31c
> ---- /dev/null
> -+++ b/drivers/lcd-linux/cgram/swedish.h
> -@@ -0,0 +1,33 @@
> -+/* swedish.h
> -+ *
> -+ * $Id: swedish.h,v 1.2 2006/12/12 16:04:03 mjona Exp $
> -+ *
> -+ * Swedish characters for lcdmod
> -+ *
> -+ * Thanks to Erik Zetterberg <mr.z at linux.se>
> -+ *
> -+ * Description: Adds support for the last three last letters in the
> -+ * swedish alphabet (a/A with ring above, a/A with diaeresis and o/O
> -+ * with diaeresis). And maps the location of where they should be
> -+ * according to the ISO-8859-1 character set to their location in CGRAM.
> -+ *
> -+ */
> -+
> -+static void init_charmap(void)
> -+{
> -+ charmap[ 0xe5 ] = 0;
> -+ charmap[ 0xe4 ] = 1;
> -+ charmap[ 0xf6 ] = 2;
> -+ charmap[ 0xc5 ] = 3;
> -+ charmap[ 0xc4 ] = 4;
> -+ charmap[ 0xd6 ] = 5;
> -+}
> -+
> -+static unsigned char cg0[] = { 0x04, 0x00, 0x0e, 0x01, 0x0f, 0x11, 0x0f, 0x00 };
> -+static unsigned char cg1[] = { 0x0a, 0x00, 0x0e, 0x01, 0x0f, 0x11, 0x0f, 0x00 };
> -+static unsigned char cg2[] = { 0x0a, 0x00, 0x0e, 0x11, 0x11, 0x11, 0x0e, 0x00 };
> -+static unsigned char cg3[] = { 0x04, 0x00, 0x0e, 0x11, 0x1f, 0x11, 0x11, 0x00 };
> -+static unsigned char cg4[] = { 0x0a, 0x00, 0x0e, 0x11, 0x1f, 0x11, 0x11, 0x00 };
> -+static unsigned char cg5[] = { 0x0a, 0x00, 0x0e, 0x11, 0x11, 0x11, 0x0e, 0x00 };
> -+static unsigned char cg6[] = { 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f };
> -+static unsigned char cg7[] = { 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f };
> -diff --git a/drivers/lcd-linux/charmap.h b/drivers/lcd-linux/charmap.h
> -new file mode 100644
> -index 0000000..376b04d
> ---- /dev/null
> -+++ b/drivers/lcd-linux/charmap.h
> -@@ -0,0 +1,79 @@
> -+/* charmap.h
> -+ *
> -+ * $Id: charmap.h,v 1.1.1.1 2005/08/23 13:30:14 mjona Exp $
> -+ *
> -+ * Character mapping for HD44780 devices by Mark Haemmerling <mail at markh.de>.
> -+ *
> -+ * Translates ISO 8859-1 to HD44780 charset.
> -+ * HD44780 charset reference: http://markh.de/hd44780-charset.png
> -+ *
> -+ * Initial table taken from lcd.o Linux kernel driver by
> -+ * Nils Faerber <nilsf at users.sourceforge.net>. Thanks!
> -+ *
> -+ * This file is released under the GNU General Public License. Refer to the
> -+ * COPYING file distributed with this package.
> -+ *
> -+ * Following translations are being performed:
> -+ * - maps umlaut accent characters to the corresponding umlaut characters
> -+ * - maps other accent characters to the characters without accents
> -+ * - maps beta (=ringel-S), micro and Yen
> -+ *
> -+ * Alternative mappings:
> -+ * - #112 ("p") -> #240 (large "p"), orig. mapped -> #112
> -+ * - #113 ("q") -> #241 (large "q"), orig. mapped -> #113
> -+ *
> -+ * HD44780 misses backslash
> -+ *
> -+ */
> -+
> -+static unsigned char charmap[] = {
> -+
> -+/* 0 - 31 */
> -+ 0, 1, 2, 3, 4, 5, 6, 7,
> -+ 8, 9, 10, 11, 12, 13, 14, 15,
> -+ 16, 17, 18, 19, 20, 21, 22, 23,
> -+ 24, 25, 26, 27, 28, 29, 30, 31,
> -+
> -+/* 32 - 63 */
> -+ 32, 33, 34, 35, 36, 37, 38, 39,
> -+ 40, 41, 42, 43, 44, 45, 46, 47,
> -+ 48, 49, 50, 51, 52, 53, 54, 55,
> -+ 56, 57, 58, 59, 60, 61, 62, 63,
> -+
> -+/* 64 - 95 */
> -+ 64, 65, 66, 67, 68, 69, 70, 71,
> -+ 72, 73, 74, 75, 76, 77, 78, 79,
> -+ 80, 81, 82, 83, 84, 85, 86, 87,
> -+ 88, 89, 90, 91, 47, 93, 94, 95,
> -+
> -+/* 96 - 127 */
> -+ 96, 97, 98, 99, 100, 101, 102, 103,
> -+104, 105, 106, 107, 108, 109, 110, 111,
> -+112, 113, 114, 115, 116, 117, 118, 119,
> -+120, 121, 122, 123, 124, 125, 126, 127,
> -+
> -+/* 128 - 159 */
> -+128, 129, 130, 131, 132, 133, 134, 135,
> -+136, 137, 138, 139, 140, 141, 142, 143,
> -+144, 145, 146, 147, 148, 149, 150, 151,
> -+152, 153, 154, 155, 156, 157, 158, 159,
> -+
> -+/* 160 - 191 */
> -+160, 33, 236, 237, 164, 92, 124, 167,
> -+ 34, 169, 170, 171, 172, 173, 174, 175,
> -+223, 177, 178, 179, 39, 249, 247, 165,
> -+ 44, 185, 186, 187, 188, 189, 190, 63,
> -+
> -+/* 192 - 223 */
> -+ 65, 65, 65, 65, 225, 65, 65, 67,
> -+ 69, 69, 69, 69, 73, 73, 73, 73,
> -+ 68, 78, 79, 79, 79, 79, 239, 120,
> -+ 48, 85, 85, 85, 245, 89, 240, 226,
> -+
> -+/* 224 - 255 */
> -+ 97, 97, 97, 97, 225, 97, 97, 99,
> -+101, 101, 101, 101, 105, 105, 105, 105,
> -+111, 110, 111, 111, 111, 111, 239, 253,
> -+ 48, 117, 117, 117, 245, 121, 240, 255
> -+
> -+};
> -diff --git a/drivers/lcd-linux/commands.h b/drivers/lcd-linux/commands.h
> -new file mode 100644
> -index 0000000..6567836
> ---- /dev/null
> -+++ b/drivers/lcd-linux/commands.h
> -@@ -0,0 +1,77 @@
> -+/* commands.h
> -+ *
> -+ * $Id: commands.h,v 1.2 2009/03/09 17:59:22 mjona Exp $
> -+ *
> -+ * LCD-Linux:
> -+ * Driver for HD44780 compatible displays connected to the parallel port.
> -+ *
> -+ * HD44780 commands.
> -+ *
> -+ * Copyright (C) 2004 - 2009 Mattia Jona-Lasinio (mjona at users.sourceforge.net)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ */
> -+
> -+#ifndef HD44780_COMMANDS_H
> -+#define HD44780_COMMANDS_H
> -+
> -+/*** HD44780 Command Set ***/
> -+
> -+/* Clear Display*/
> -+#define CLR_DISP 0x01 /* Clear entire display; cursor at row 0, column 0 */
> -+
> -+/* Return Home */
> -+#define RET_HOME 0x02 /* Cursor at row 0, column 0; display content doesn't change */
> -+
> -+/* Entry Mode Set */
> -+#define ENTRY_MODE_SET 0x04
> -+#define DISP_SHIFT_ON (ENTRY_MODE_SET | 0x01) /* Shift display, not cursor after data write */
> -+#define DISP_SHIFT_OFF (ENTRY_MODE_SET | 0x00) /* Shift cursor, not display after data write */
> -+#define CURS_INC (ENTRY_MODE_SET | 0x02) /* Shift on the right after data read/write */
> -+#define CURS_DEC (ENTRY_MODE_SET | 0x00) /* Shift on the left after data read/write */
> -+
> -+/* Display on/off Control */
> -+#define DISP_ONOFF_CNTR 0x08
> -+#define BLINK_ON (DISP_ONOFF_CNTR | 0x01) /* Cursor blinking on */
> -+#define BLINK_OFF (DISP_ONOFF_CNTR | 0x00) /* Cursor blinking off */
> -+#define CURS_ON (DISP_ONOFF_CNTR | 0x02) /* Display Cursor */
> -+#define CURS_OFF (DISP_ONOFF_CNTR | 0x00) /* Hide Cursor */
> -+#define DISP_ON (DISP_ONOFF_CNTR | 0x04) /* Turn on display updating */
> -+#define DISP_OFF (DISP_ONOFF_CNTR | 0x00) /* Freeze display content */
> -+
> -+/* Cursor or Display Shift */
> -+#define CURS_DISP_SHIFT 0x10
> -+#define SHIFT_RIGHT (CURS_DISP_SHIFT | 0x04) /* Shift on the right */
> -+#define SHIFT_LEFT (CURS_DISP_SHIFT | 0x00) /* Shift on the left */
> -+#define SHIFT_DISP (CURS_DISP_SHIFT | 0x08) /* Shift display */
> -+#define SHIFT_CURS (CURS_DISP_SHIFT | 0x00) /* Shift cursor */
> -+
> -+/* Function Set */
> -+#define FUNC_SET 0x20
> -+#define FONT_5X10 (FUNC_SET | 0x04) /* Select 5x10 dots font */
> -+#define FONT_5X8 (FUNC_SET | 0x00) /* Select 5x8 dots font */
> -+#define DISP_2_LINES (FUNC_SET | 0x08) /* Select 2 lines display (only 5x8 font allowed) */
> -+#define DISP_1_LINE (FUNC_SET | 0x00) /* Select 1 line display */
> -+#define BUS_8_BITS (FUNC_SET | 0x10) /* Set 8 data bits */
> -+#define BUS_4_BITS (FUNC_SET | 0x00) /* Set 4 data bits */
> -+
> -+/* Set CGRAM Address */
> -+#define CGRAM_IO 0x40 /* Base CGRAM address */
> -+
> -+/* Set DDRAM Address */
> -+#define DDRAM_IO 0x80 /* Base DDRAM address */
> -+
> -+#endif /* commands included */
> -diff --git a/drivers/lcd-linux/config.h b/drivers/lcd-linux/config.h
> -new file mode 100644
> -index 0000000..face191
> ---- /dev/null
> -+++ b/drivers/lcd-linux/config.h
> -@@ -0,0 +1,73 @@
> -+/* config.h
> -+ *
> -+ * $Id: config.h,v 1.16 2009/09/27 21:27:03 mjona Exp $
> -+ *
> -+ * Configure file for LCD-Linux. Here you must specify your hardware setup and
> -+ * timings constants. The default values will probably be right for you.
> -+ *
> -+ * Copyright (C) 2005 - 2009 Mattia Jona-Lasinio (mjona at users.sourceforge.net)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ *
> -+ */
> -+
> -+/* Setup the default user defined characters in CGRAM */
> -+#include "cgram/default.h"
> -+/* #include "cgram/swedish.h" */
> -+/* #include "cgram/cgram.h" */
> -+
> -+/* Don't modify the default timing constants
> -+ * unless you know what you are doing.
> -+ */
> -+
> -+/* In case of a 4 bit bus, indicate your
> -+ * wiring configuration for the data bits
> -+ *
> -+ * 0 -> D3, D2, D1, D0
> -+ * 1 -> D4, D3, D2, D1
> -+ * 2 -> D5, D4, D3, D2
> -+ * 3 -> D6, D5, D4, D3
> -+ * 4 -> D7, D6, D5, D4
> -+ */
> -+#define SETUP 4
> -+
> -+#define HIGH_NIBBLE_WRITE(x) (((x) >> (4-SETUP)) & (0x0f << SETUP))
> -+#define LOW_NIBBLE_WRITE(x) (((x) << SETUP) & (0x0f << SETUP))
> -+#define HIGH_NIBBLE_READ(x) (((x) & (0x0f << SETUP)) << (4-SETUP))
> -+#define LOW_NIBBLE_READ(x) (((x) & (0x0f << SETUP)) >> SETUP)
> -+
> -+/* Execution times (in microseconds) */
> -+#define T_READ 60 /* Read execution time (min 43 us) */
> -+#define T_WRITE 60 /* Write execution time (min 43 us) */
> -+#define T_BF 4 /* Busy flag polling time (min 1 us) */
> -+
> -+/* Timings in nanoseconds */
> -+#define T_AS 200 /* Address set-up time (min 140 ns) */
> -+#define T_EH 500 /* Enable high time (min 450 ns) */
> -+#define T_EL 800 /* Enable low time (min 500 ns) */
> -+
> -+/* Various constants */
> -+#define DFLT_NUM_CNTR 1 /* Default number of controllers the display has */
> -+#define DFLT_CNTR_ROWS 4 /* Default number of rows per controller */
> -+#define DFLT_CNTR_COLS 20 /* Default number of columns the display has */
> -+#define DFLT_VS_ROWS 25 /* Default number of rows for the virtual screen */
> -+#define DFLT_VS_COLS 80 /* Default number of columns for the virtual screen */
> -+#define DFLT_TABSTOP 4 /* Default length of tabs */
> -+#define DFLT_FLAGS HD44780_CHECK_BF /* Default flags: check BF and 8 bit bus */
> -+
> -+#define MAX_NUM_CNTR 7 /* We support up to 7 controllers */
> -+#define MAX_CNTR_ROWS 4 /* The HD44780 supports up to 4 lines as a fake 2 lines mode */
> -+#define MAX_CNTR_COLS 80 /* The HD44780 supports up to 80 characters (1*80; 2*40; etc) */
> -diff --git a/drivers/lcd-linux/hd44780.c b/drivers/lcd-linux/hd44780.c
> -new file mode 100644
> -index 0000000..0b1af6b
> ---- /dev/null
> -+++ b/drivers/lcd-linux/hd44780.c
> -@@ -0,0 +1,854 @@
> -+/* hd44780.c
> -+ *
> -+ * $Id: hd44780.c,v 1.181 2010/03/03 14:56:22 mjona Exp $
> -+ *
> -+ * LCD-Linux:
> -+ * Driver for HD44780 compatible displays connected to the parallel port.
> -+ *
> -+ * Copyright (C) 2005 - 2009 Mattia Jona-Lasinio (mjona at users.sourceforge.net)
> -+ * Based on the code for Sim.One Hardware by Nuccio Raciti (raciti.nuccio at gmail.com)
> -+ * Modified for ts72xx hardware by Petr Stetiar (ynezz at true.cz)
> -+ * (Only 8-bit mode supported for now.)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ */
> -+
> -+#ifdef CONFIG_PROC_FS
> -+#define USE_PROC
> -+#else
> -+#undef USE_PROC
> -+#endif
> -+
> -+#include <linux/bitops.h>
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+
> -+#include <linux/delay.h>
> -+#include <linux/fs.h>
> -+
> -+#include <asm/uaccess.h>
> -+#include <asm/gpio.h>
> -+#include <asm/io.h>
> -+#include <linux/init.h>
> -+#include <linux/ioport.h>
> -+
> -+#ifdef USE_PROC
> -+#include <linux/proc_fs.h>
> -+#endif
> -+
> -+#define LCD_LINUX_MAIN
> -+#include <linux/hd44780.h>
> -+
> -+#include "charmap.h"
> -+#include "commands.h"
> -+#include "config.h"
> -+
> -+#define LCD_EN EP93XX_GPIO_LINE_H(3)
> -+#define LCD_RS EP93XX_GPIO_LINE_H(4)
> -+#define LCD_WR EP93XX_GPIO_LINE_H(5)
> -+#define LCD_DATA0 EP93XX_GPIO_LINE_A(0)
> -+#define LCD_DATA1 EP93XX_GPIO_LINE_A(1)
> -+#define LCD_DATA2 EP93XX_GPIO_LINE_A(2)
> -+#define LCD_DATA3 EP93XX_GPIO_LINE_A(3)
> -+#define LCD_DATA4 EP93XX_GPIO_LINE_A(4)
> -+#define LCD_DATA5 EP93XX_GPIO_LINE_A(5)
> -+#define LCD_DATA6 EP93XX_GPIO_LINE_A(6)
> -+#define LCD_DATA7 EP93XX_GPIO_LINE_A(7)
> -+
> -+static struct gpio lcd_gpios[] = {
> -+ { LCD_EN, GPIOF_OUT_INIT_LOW, "LCD enable" },
> -+ { LCD_RS, GPIOF_OUT_INIT_LOW, "LCD data" },
> -+ { LCD_WR, GPIOF_OUT_INIT_LOW, "LCD r/w" },
> -+ { LCD_DATA0, GPIOF_OUT_INIT_LOW, "LCD data0" },
> -+ { LCD_DATA1, GPIOF_OUT_INIT_LOW, "LCD data1" },
> -+ { LCD_DATA2, GPIOF_OUT_INIT_LOW, "LCD data2" },
> -+ { LCD_DATA3, GPIOF_OUT_INIT_LOW, "LCD data3" },
> -+ { LCD_DATA4, GPIOF_OUT_INIT_LOW, "LCD data4" },
> -+ { LCD_DATA5, GPIOF_OUT_INIT_LOW, "LCD data5" },
> -+ { LCD_DATA6, GPIOF_OUT_INIT_LOW, "LCD data6" },
> -+ { LCD_DATA7, GPIOF_OUT_INIT_LOW, "LCD data7" },
> -+};
> -+
> -+/** Function prototypes **/
> -+static void read_display(unsigned char *byte, unsigned char bitmask);
> -+static void write_display(unsigned char byte, unsigned char bitmask);
> -+
> -+/* Initialization */
> -+static int hd44780_validate_driver(void);
> -+static int hd44780_init_port(void);
> -+static int hd44780_cleanup_port(void);
> -+static int hd44780_init_display(void);
> -+static int hd44780_cleanup_display(void);
> -+
> -+/* Write */
> -+static void hd44780_address_mode(int);
> -+static void hd44780_clear_display(void);
> -+static void hd44780_write_char(unsigned int, unsigned short);
> -+static void hd44780_write_cgram_char(unsigned char, unsigned char *);
> -+
> -+/* Read */
> -+static void check_bf(unsigned char);
> -+static void hd44780_read_char(unsigned int, unsigned short *);
> -+static void hd44780_read_cgram_char(unsigned char, unsigned char *);
> -+
> -+/* Input handling */
> -+static int hd44780_handle_custom_char(unsigned int);
> -+static int hd44780_handle_custom_ioctl(unsigned int, unsigned long, unsigned int);
> -+
> -+/* Proc operations */
> -+#ifdef USE_PROC
> -+static void create_proc_entries(void);
> -+static void remove_proc_entries(void);
> -+#endif
> -+
> -+/* hd44780_flags */
> -+#define _CHECK_BF 0 /* Do busy-flag checking */
> -+#define _4BITS_BUS 1 /* The bus is 4 bits long */
> -+#define _5X10_FONT 2 /* Use 5x10 font */
> -+#define CURSOR_BLINK 3 /* Make the cursor blinking */
> -+#define SHOW_CURSOR 4 /* Make the cursor visible */
> -+#define DISPLAY_ON 5 /* Display status: on or off */
> -+#define INC_ADDR 6 /* Increment address after data read/write */
> -+#define BACKLIGHT 7 /* Display backlight: on or off */
> -+#define CGRAM_STATE 9 /* Controller status bitmask (bits 9->15): DDRAM or CGRAM access */
> -+
> -+/* hd44780 access */
> -+#define ACCESS_TO_READ 0
> -+#define ACCESS_TO_WRITE 1
> -+#define ACCESS_TO_DATA 2
> -+
> -+#define ESC_MASK 0x00ff0000
> -+#define PROC_MASK 0x0f000000
> -+
> -+#define SET_STATE(state, mask) (hd44780_flags = (hd44780_flags & ~(mask)) | ((state) & (mask)))
> -+#define SET_ESC_STATE(state) SET_STATE((state) << 16, ESC_MASK)
> -+#define SET_PROC_LEVEL(level) SET_STATE((level) << 24, PROC_MASK)
> -+#define ESC_STATE ((hd44780_flags & ESC_MASK) >> 16)
> -+#define PROC_LEVEL ((hd44780_flags & PROC_MASK) >> 24)
> -+
> -+/* globals */
> -+static unsigned int disp_size; /* Display size (rows*columns) */
> -+static unsigned int disp_offset[1]; /* Physical cursor position on the display */
> -+static unsigned long hd44780_flags; /* Driver flags for internal use only */
> -+
> -+static struct lcd_parameters par = {
> -+ .name = HD44780_STRING,
> -+ .minor = HD44780_MINOR,
> -+ .flags = DFLT_FLAGS,
> -+ .tabstop = DFLT_TABSTOP,
> -+ .num_cntr = 1,
> -+ .cntr_rows = DFLT_CNTR_ROWS,
> -+ .cntr_cols = DFLT_CNTR_COLS,
> -+ .vs_rows = DFLT_VS_ROWS,
> -+ .vs_cols = DFLT_VS_COLS,
> -+ .cgram_chars = 8,
> -+ .cgram_bytes = 8,
> -+ .cgram_char0 = 0,
> -+};
> -+/* End of globals */
> -+
> -+#ifdef MODULE
> -+#include <linux/device.h>
> -+MODULE_ALIAS_CHARDEV(LCD_MAJOR, HD44780_MINOR);
> -+#include <linux/kmod.h>
> -+
> -+static unsigned short flags = DFLT_FLAGS;
> -+static unsigned short tabstop = DFLT_TABSTOP;
> -+static unsigned short cntr_rows = DFLT_CNTR_ROWS;
> -+static unsigned short cntr_cols = DFLT_CNTR_COLS;
> -+static unsigned short vs_rows = DFLT_VS_ROWS;
> -+static unsigned short vs_cols = DFLT_VS_COLS;
> -+static unsigned short minor = HD44780_MINOR;
> -+
> -+MODULE_DESCRIPTION("LCD ts72xx driver for HD44780 compatible controllers.");
> -+MODULE_AUTHOR("Petr Stetiar <ynezz at true.cz>");
> -+#ifdef MODULE_LICENSE
> -+MODULE_LICENSE("GPL");
> -+#endif
> -+module_param(flags, ushort, 0444);
> -+module_param(cntr_rows, ushort, 0444);
> -+module_param(cntr_cols, ushort, 0444);
> -+module_param(vs_rows, ushort, 0444);
> -+module_param(vs_cols, ushort, 0444);
> -+module_param(tabstop, ushort, 0444);
> -+module_param(minor, ushort, 0444);
> -+MODULE_PARM_DESC(flags, "Various flags (see Documentation)");
> -+MODULE_PARM_DESC(cntr_rows, "Number of rows per controller on the LCD: 1, 2, 4 (default: " string(DFLT_CNTR_ROWS) ")");
> -+MODULE_PARM_DESC(cntr_cols, "Number of columns on the LCD (default: " string(DFLT_CNTR_COLS) ", max: " string(MAX_CNTR_COLS) ")");
> -+MODULE_PARM_DESC(vs_rows, "Number of rows of the virtual screen (default: " string(DFLT_VS_ROWS) ")");
> -+MODULE_PARM_DESC(vs_cols, "Number of columns of the virtual screen (default: " string(DFLT_VS_COLS) ")");
> -+MODULE_PARM_DESC(tabstop, "Tab character length (default: " string(DFLT_TABSTOP) ")");
> -+MODULE_PARM_DESC(minor, "Assigned minor number (default: " string(HD44780_MINOR) ")");
> -+#else
> -+
> -+/*
> -+ * Parse boot command line
> -+ *
> -+ * hd44780=cntr_rows,cntr_cols,vs_rows,vs_cols,flags,minor,tabstop
> -+ */
> -+static int __init hd44780_boot_init(char *cmdline)
> -+{
> -+ char *str = cmdline;
> -+ int idx = 0;
> -+ unsigned short *args[] = {
> -+ &par.cntr_rows,
> -+ &par.cntr_cols,
> -+ &par.vs_rows,
> -+ &par.vs_cols,
> -+ (ushort *) &par.flags,
> -+ &par.num_cntr,
> -+ &par.minor,
> -+ &par.tabstop,
> -+ };
> -+
> -+ while (*cmdline && idx < (sizeof(args)/sizeof(unsigned short *))) {
> -+ switch (*str) {
> -+ case ',':
> -+ *str++ = 0;
> -+ case 0:
> -+ if (strlen(cmdline))
> -+ *args[idx] = simple_strtoul(cmdline, NULL, 0);
> -+ ++idx;
> -+ cmdline = str;
> -+ break;
> -+ default:
> -+ ++str;
> -+ break;
> -+ }
> -+ }
> -+
> -+ return (1);
> -+}
> -+
> -+__setup("hd44780=", hd44780_boot_init);
> -+#endif /* MODULE */
> -+
> -+/* Macros for iterator handling */
> -+static inline unsigned int iterator_inc_(unsigned int iterator, const unsigned int module)
> -+{
> -+ return ((++iterator)%module);
> -+}
> -+
> -+static inline unsigned int iterator_dec_(unsigned int iterator, const unsigned int module)
> -+{
> -+ return (iterator ? --iterator : module-1);
> -+}
> -+
> -+#define iterator_inc(iterator, module) (iterator = iterator_inc_(iterator, module))
> -+#define iterator_dec(iterator, module) (iterator = iterator_dec_(iterator, module))
> -+
> -+static inline void set_lines(unsigned char bitmask)
> -+{
> -+ gpio_set_value(LCD_EN, 0); /* Disable */
> -+
> -+ if (bitmask & ACCESS_TO_WRITE ) {
> -+ gpio_direction_output(LCD_DATA0, 0);
> -+ gpio_direction_output(LCD_DATA1, 0);
> -+ gpio_direction_output(LCD_DATA2, 0);
> -+ gpio_direction_output(LCD_DATA3, 0);
> -+ gpio_direction_output(LCD_DATA4, 0);
> -+ gpio_direction_output(LCD_DATA5, 0);
> -+ gpio_direction_output(LCD_DATA6, 0);
> -+ gpio_direction_output(LCD_DATA7, 0);
> -+ gpio_set_value(LCD_WR, 0); /* Write */
> -+ } else {
> -+ gpio_direction_input(LCD_DATA0);
> -+ gpio_direction_input(LCD_DATA1);
> -+ gpio_direction_input(LCD_DATA2);
> -+ gpio_direction_input(LCD_DATA3);
> -+ gpio_direction_input(LCD_DATA4);
> -+ gpio_direction_input(LCD_DATA5);
> -+ gpio_direction_input(LCD_DATA6);
> -+ gpio_direction_input(LCD_DATA7);
> -+ gpio_set_value(LCD_WR, 1); /* Read */
> -+ }
> -+
> -+ if (bitmask & ACCESS_TO_DATA )
> -+ gpio_set_value(LCD_RS, 1); /* Data */
> -+ else
> -+ gpio_set_value(LCD_RS, 0); /* Cmds*/
> -+}
> -+
> -+static inline void read_display(unsigned char *byte, unsigned char bitmask)
> -+{
> -+ unsigned char ret;
> -+ if (bitmask)
> -+ check_bf(bitmask);
> -+
> -+ set_lines(bitmask);
> -+
> -+ ndelay(T_AS); /* Address set-up time */
> -+ gpio_set_value(LCD_EN, 1); /* Enable */
> -+ ndelay(T_EH); /* Enable high time */
> -+
> -+ ret = (gpio_get_value(LCD_DATA0) << 0);
> -+ ret |= (gpio_get_value(LCD_DATA1) << 1);
> -+ ret |= (gpio_get_value(LCD_DATA2) << 2);
> -+ ret |= (gpio_get_value(LCD_DATA3) << 3);
> -+ ret |= (gpio_get_value(LCD_DATA4) << 4);
> -+ ret |= (gpio_get_value(LCD_DATA5) << 5);
> -+ ret |= (gpio_get_value(LCD_DATA6) << 6);
> -+ ret |= (gpio_get_value(LCD_DATA7) << 7);
> -+
> -+ gpio_set_value(LCD_EN, 0); /* Disable */
> -+ ndelay(T_EL); /* Enable low time */
> -+ *byte = ret;
> -+}
> -+
> -+/* Low level write to the display */
> -+static inline void write_display(unsigned char data, unsigned char bitmask)
> -+{
> -+ check_bf(bitmask);
> -+ set_lines(bitmask);
> -+
> -+ gpio_set_value(LCD_DATA0, (data >> 0) & 1);
> -+ gpio_set_value(LCD_DATA1, (data >> 1) & 1);
> -+ gpio_set_value(LCD_DATA2, (data >> 2) & 1);
> -+ gpio_set_value(LCD_DATA3, (data >> 3) & 1);
> -+ gpio_set_value(LCD_DATA4, (data >> 4) & 1);
> -+ gpio_set_value(LCD_DATA5, (data >> 5) & 1);
> -+ gpio_set_value(LCD_DATA6, (data >> 6) & 1);
> -+ gpio_set_value(LCD_DATA7, (data >> 7) & 1);
> -+
> -+ ndelay(T_AS); /* Address set-up time */
> -+ gpio_set_value(LCD_EN, 1);
> -+ ndelay(T_EH); /* Enable high time */
> -+
> -+ gpio_set_value(LCD_EN, 0); /* Disable */
> -+ ndelay(T_EL); /* Enable low time */
> -+}
> -+
> -+/* Read Address Counter AC from the display */
> -+static unsigned char read_ac(unsigned char bitmask)
> -+{
> -+ unsigned char byte;
> -+
> -+ read_display(&byte, bitmask);
> -+
> -+ return (byte);
> -+}
> -+
> -+static void check_bf(unsigned char bitmask)
> -+{
> -+ unsigned int timeout = 20;
> -+ static unsigned char do_check_bf = 5;
> -+
> -+ gpio_set_value(LCD_EN, 0); /* Disable */
> -+
> -+ gpio_direction_input(LCD_DATA0);
> -+ gpio_direction_input(LCD_DATA1);
> -+ gpio_direction_input(LCD_DATA2);
> -+ gpio_direction_input(LCD_DATA3);
> -+ gpio_direction_input(LCD_DATA4);
> -+ gpio_direction_input(LCD_DATA5);
> -+ gpio_direction_input(LCD_DATA6);
> -+ gpio_direction_input(LCD_DATA7);
> -+
> -+ gpio_set_value(LCD_WR, 1); /* Read */
> -+ gpio_set_value(LCD_RS, 0); /* Instru */
> -+
> -+ ndelay(T_AS); /* Address set-up time */
> -+ gpio_set_value(LCD_EN, 1); /* Enable */
> -+ ndelay(T_EH); /* Enable high time */
> -+
> -+ do {
> -+ udelay(T_BF);
> -+ } while (gpio_get_value(LCD_DATA7) && --timeout);
> -+
> -+ if (!timeout) {
> -+ if (!--do_check_bf) {
> -+ printk(KERN_NOTICE "hd44780 error: is LCD connected?\n");
> -+ }
> -+ }
> -+
> -+ gpio_set_value(LCD_EN, 0); /* Disable */
> -+ ndelay(T_EL); /* Enable low time */
> -+}
> -+
> -+/* Send commands to the display */
> -+static void write_command(unsigned char command)
> -+{
> -+ write_display(command, ACCESS_TO_WRITE);
> -+
> -+ if (command <= 0x03)
> -+ mdelay(2);
> -+}
> -+
> -+static inline void set_cursor(unsigned int offset)
> -+{
> -+ unsigned int disp_number = offset/disp_size;
> -+ unsigned int local_offset = offset%disp_size;
> -+
> -+ if (disp_offset[disp_number] != local_offset || test_bit(CGRAM_STATE+disp_number, &hd44780_flags)) {
> -+ unsigned int disp_row = local_offset/par.cntr_cols;
> -+ unsigned int disp_column = local_offset%par.cntr_cols;
> -+
> -+ write_command(DDRAM_IO | ((disp_row%2)*0x40) | (((disp_row >= 2)*par.cntr_cols)+disp_column));
> -+ clear_bit(CGRAM_STATE+disp_number, &hd44780_flags);
> -+ disp_offset[disp_number] = local_offset;
> -+ }
> -+}
> -+
> -+/* HD44780 DDRAM addresses are consecutive only when
> -+ * the cursor moves on the same row of the display.
> -+ * Every time the row of the cursor changes we invalidate
> -+ * the cursor position to force hardware cursor repositioning.
> -+ */
> -+static inline void mov_cursor(unsigned int disp_number)
> -+{
> -+ if (test_bit(INC_ADDR, &hd44780_flags)) {
> -+ iterator_inc(disp_offset[disp_number], disp_size);
> -+ if (disp_offset[disp_number]%par.cntr_cols == 0)
> -+ disp_offset[disp_number] = disp_size;
> -+ } else {
> -+ iterator_dec(disp_offset[disp_number], disp_size);
> -+ if (disp_offset[disp_number]%par.cntr_cols == par.cntr_cols-1)
> -+ disp_offset[disp_number] = disp_size;
> -+ }
> -+}
> -+
> -+static struct lcd_driver hd44780 = {
> -+ .read_char = hd44780_read_char,
> -+ .read_cgram_char = hd44780_read_cgram_char,
> -+ .write_char = hd44780_write_char,
> -+ .write_cgram_char = hd44780_write_cgram_char,
> -+ .address_mode = hd44780_address_mode,
> -+ .clear_display = hd44780_clear_display,
> -+ .validate_driver = hd44780_validate_driver,
> -+ .init_display = hd44780_init_display,
> -+ .cleanup_display = hd44780_cleanup_display,
> -+ .init_port = hd44780_init_port,
> -+ .cleanup_port = hd44780_cleanup_port,
> -+ .handle_custom_char = hd44780_handle_custom_char,
> -+ .handle_custom_ioctl = hd44780_handle_custom_ioctl,
> -+
> -+ .charmap = charmap,
> -+};
> -+
> -+static void hd44780_read_char(unsigned int offset, unsigned short *data)
> -+{
> -+ unsigned int disp_number = offset/disp_size;
> -+ unsigned char tmp;
> -+
> -+ set_cursor(offset);
> -+ read_display(&tmp, ACCESS_TO_DATA);
> -+ *data = tmp;
> -+ mov_cursor(disp_number);
> -+}
> -+
> -+static void hd44780_read_cgram_char(unsigned char index, unsigned char *pixels)
> -+{
> -+ unsigned int i;
> -+
> -+ write_command(CGRAM_IO | (index << 3));
> -+ set_bit(CGRAM_STATE+0, &hd44780_flags);
> -+
> -+ for (i = 0; i < 8; ++i) {
> -+ read_display(pixels+i, ACCESS_TO_DATA);
> -+ pixels[i] &= 0x1f;
> -+ }
> -+
> -+}
> -+
> -+static void hd44780_write_char(unsigned int offset, unsigned short data)
> -+{
> -+ unsigned int disp_number = offset/disp_size;
> -+
> -+ set_cursor(offset);
> -+ write_display(data & 0xff, ACCESS_TO_WRITE | ACCESS_TO_DATA);
> -+ mov_cursor(disp_number);
> -+}
> -+
> -+static void hd44780_write_cgram_char(unsigned char index, unsigned char *pixels)
> -+{
> -+ unsigned int i;
> -+
> -+ /* Move address pointer to index in CGRAM */
> -+ write_command(CGRAM_IO | (index << 3));
> -+ set_bit(CGRAM_STATE+0, &hd44780_flags);
> -+
> -+ for (i = 0; i < 8; ++i) {
> -+ pixels[i] &= 0x1f;
> -+ write_display(pixels[i], ACCESS_TO_WRITE | ACCESS_TO_DATA );
> -+ }
> -+}
> -+
> -+/* Increment/decrement address mode after a data read/write */
> -+static void hd44780_address_mode(int mode)
> -+{
> -+ if (mode > 0 && ! test_bit(INC_ADDR, &hd44780_flags)) {
> -+ write_command(CURS_INC | DISP_SHIFT_OFF);
> -+ set_bit(INC_ADDR, &hd44780_flags);
> -+ } else if (mode < 0 && test_bit(INC_ADDR, &hd44780_flags)) {
> -+ write_command(CURS_DEC | DISP_SHIFT_OFF);
> -+ clear_bit(INC_ADDR, &hd44780_flags);
> -+ }
> -+}
> -+
> -+static void hd44780_clear_display(void)
> -+{
> -+ write_command(CLR_DISP);
> -+ if (! test_bit(INC_ADDR, &hd44780_flags))
> -+ write_command(CURS_DEC | DISP_SHIFT_OFF);
> -+ memset(disp_offset, 0, sizeof(disp_offset));
> -+}
> -+
> -+static int hd44780_validate_driver(void)
> -+{
> -+ if (par.cntr_rows != 1 && par.cntr_rows != 2 && par.cntr_rows != 4)
> -+ par.cntr_rows = DFLT_CNTR_ROWS;
> -+
> -+ if (par.cntr_rows != 1)
> -+ par.flags &= ~HD44780_5X10_FONT;
> -+
> -+ if (! par.cntr_cols || par.cntr_cols > MAX_CNTR_COLS/par.cntr_rows)
> -+ par.cntr_cols = MAX_CNTR_COLS/par.cntr_rows;
> -+
> -+ disp_size = par.cntr_rows*par.cntr_cols;
> -+
> -+ /* These parameters depend on the hardware and cannot be changed */
> -+ par.cgram_chars = 8;
> -+ par.cgram_bytes = 8;
> -+ par.cgram_char0 = 0;
> -+
> -+ return (0);
> -+}
> -+
> -+/* Send init commands to the display */
> -+static void write_init_command(void)
> -+{
> -+ unsigned char command;
> -+ command = BUS_8_BITS;
> -+ command |= ((par.cntr_rows == 1) ? DISP_1_LINE : DISP_2_LINES);
> -+ command |= (test_bit(_5X10_FONT, &hd44780_flags) ? FONT_5X10 : FONT_5X8);
> -+
> -+ write_display(command, ACCESS_TO_WRITE);
> -+ mdelay(20); /* Wait more than 4.1 ms */
> -+
> -+ write_display(command, ACCESS_TO_WRITE);
> -+ udelay(200); /* Wait more than 100 us */
> -+
> -+ write_display(command, ACCESS_TO_WRITE);
> -+ udelay(200); /* Wait more than 100 us */
> -+
> -+ write_command(command);
> -+}
> -+
> -+static int hd44780_init_display(void)
> -+{
> -+ if (par.flags & HD44780_CHECK_BF)
> -+ set_bit(_CHECK_BF, &hd44780_flags);
> -+ else
> -+ clear_bit(_CHECK_BF, &hd44780_flags);
> -+
> -+ if (par.flags & HD44780_4BITS_BUS)
> -+ set_bit(_4BITS_BUS, &hd44780_flags);
> -+ else
> -+ clear_bit(_4BITS_BUS, &hd44780_flags);
> -+
> -+ if (par.flags & HD44780_5X10_FONT)
> -+ set_bit(_5X10_FONT, &hd44780_flags);
> -+ else
> -+ clear_bit(_5X10_FONT, &hd44780_flags);
> -+
> -+ write_init_command();
> -+ hd44780_address_mode(1);
> -+ hd44780_clear_display();
> -+ write_command(DISP_ON | CURS_OFF | BLINK_OFF);
> -+ set_bit(DISPLAY_ON, &hd44780_flags);
> -+ clear_bit(SHOW_CURSOR, &hd44780_flags);
> -+ clear_bit(CURSOR_BLINK, &hd44780_flags);
> -+
> -+ /* Set the CGRAM to default values */
> -+ hd44780_write_cgram_char(0, cg0);
> -+ hd44780_write_cgram_char(1, cg1);
> -+ hd44780_write_cgram_char(2, cg2);
> -+ hd44780_write_cgram_char(3, cg3);
> -+ hd44780_write_cgram_char(4, cg4);
> -+ hd44780_write_cgram_char(5, cg5);
> -+ hd44780_write_cgram_char(6, cg6);
> -+ hd44780_write_cgram_char(7, cg7);
> -+ init_charmap();
> -+
> -+ return (0);
> -+}
> -+
> -+static int hd44780_cleanup_display(void)
> -+{
> -+ hd44780_clear_display();
> -+
> -+ return (0);
> -+}
> -+
> -+static int hd44780_init_port(void)
> -+{
> -+ int err = gpio_request_array(lcd_gpios, ARRAY_SIZE(lcd_gpios));
> -+ if (err) {
> -+ printk(KERN_ERR "hd44780: error while requesting GPIO pins\n");
> -+ return 1;
> -+ }
> -+
> -+ return 0;
> -+}
> -+
> -+static int hd44780_cleanup_port(void)
> -+{
> -+ gpio_direction_input(LCD_RS);
> -+ gpio_direction_input(LCD_EN);
> -+ gpio_direction_input(LCD_DATA0);
> -+ gpio_direction_input(LCD_DATA1);
> -+ gpio_direction_input(LCD_DATA2);
> -+ gpio_direction_input(LCD_DATA3);
> -+ gpio_direction_input(LCD_DATA4);
> -+ gpio_direction_input(LCD_DATA5);
> -+ gpio_direction_input(LCD_DATA6);
> -+ gpio_direction_input(LCD_DATA7);
> -+
> -+ gpio_free_array(lcd_gpios, ARRAY_SIZE(lcd_gpios));
> -+
> -+ return 0;
> -+}
> -+
> -+static void display_attr(unsigned char input)
> -+{
> -+ unsigned char command;
> -+
> -+ switch (ESC_STATE) {
> -+ case 'a': /* Turn on/off the display cursor */
> -+ if (input == '1')
> -+ set_bit(SHOW_CURSOR, &hd44780_flags);
> -+ else if (input == '0')
> -+ clear_bit(SHOW_CURSOR, &hd44780_flags);
> -+ break;
> -+ case 'b': /* Turn on/off the display cursor blinking */
> -+ if (input == '1')
> -+ set_bit(CURSOR_BLINK, &hd44780_flags);
> -+ else if (input == '0')
> -+ clear_bit(CURSOR_BLINK, &hd44780_flags);
> -+ break;
> -+ case 'h': /* Turn on/off the display */
> -+ if (input == '1')
> -+ set_bit(DISPLAY_ON, &hd44780_flags);
> -+ else if (input == '0')
> -+ clear_bit(DISPLAY_ON, &hd44780_flags);
> -+ break;
> -+ }
> -+
> -+ command = (test_bit(DISPLAY_ON, &hd44780_flags) ? DISP_ON : DISP_OFF);
> -+ command |= (test_bit(SHOW_CURSOR, &hd44780_flags) ? CURS_ON : CURS_OFF);
> -+ command |= (test_bit(CURSOR_BLINK, &hd44780_flags) ? BLINK_ON : BLINK_OFF);
> -+
> -+ if (ESC_STATE == 'h')
> -+ write_command(command);
> -+}
> -+
> -+static int hd44780_handle_custom_char(unsigned int _input)
> -+{
> -+ unsigned char input = _input & 0xff;
> -+
> -+ if (_input & (~0xff)) {
> -+ switch (ESC_STATE) {
> -+ case 'a': /* Turn on/off the display cursor */
> -+ case 'b': /* Turn on/off the display cursor blinking */
> -+ case 'h': /* Turn on/off the the display */
> -+ display_attr(input);
> -+ return (0);
> -+ case 'l': /* Turn on/off the backlight */
> -+ if (input == '1')
> -+ set_bit(BACKLIGHT, &hd44780_flags);
> -+ else if (input == '0')
> -+ clear_bit(BACKLIGHT, &hd44780_flags);
> -+ read_ac(ACCESS_TO_READ);
> -+ return (0);
> -+ }
> -+ }
> -+
> -+ switch (input) {
> -+ case 'a': /* Turn on/off the display cursor */
> -+ case 'b': /* Turn on/off the display cursor blinking */
> -+ case 'h': /* Turn on/off the display */
> -+ case 'l': /* Turn on/off the backlight */
> -+ SET_ESC_STATE(input);
> -+ return (1);
> -+ case 'd': /* Shift display cursor Right */
> -+ write_command(SHIFT_CURS | SHIFT_RIGHT);
> -+ return (0);
> -+ case 'e': /* Shift display cursor Left */
> -+ write_command(SHIFT_CURS | SHIFT_LEFT);
> -+ return (0);
> -+ case 'f': /* Shift display Right */
> -+ write_command(SHIFT_DISP | SHIFT_RIGHT);
> -+ return (0);
> -+ case 'g': /* Shift display Left */
> -+ write_command(SHIFT_DISP | SHIFT_LEFT);
> -+ return (0);
> -+ }
> -+
> -+ return (-1);
> -+}
> -+
> -+static int hd44780_handle_custom_ioctl(unsigned int num, unsigned long arg, unsigned int user_space)
> -+{
> -+ unsigned char *buffer = (unsigned char *)arg;
> -+
> -+ if (num != HD44780_READ_AC)
> -+ return (-ENOIOCTLCMD);
> -+
> -+ if (user_space)
> -+ put_user(read_ac(ACCESS_TO_READ), buffer);
> -+ else
> -+ buffer[0] = read_ac(ACCESS_TO_READ);
> -+
> -+ return (0);
> -+}
> -+
> -+#ifdef USE_PROC
> -+static int hd44780_proc_status(char *buffer, char **start, off_t offset, int size, int *eof, void *data)
> -+{
> -+ char *temp = buffer;
> -+
> -+ /* Print display configuration */
> -+ temp += sprintf(temp,
> -+ "Interface:\t%u bits\n"
> -+ "Display rows:\t%d\n"
> -+ "Display cols:\t%d\n"
> -+ "Screen rows:\t%d\n"
> -+ "Screen cols:\t%d\n"
> -+ "Read:\t\t%sabled\n"
> -+ "Busy flag chk:\t%sabled\n"
> -+ "Assigned minor:\t%u\n",
> -+ (test_bit(_4BITS_BUS, &hd44780_flags) ? 4 : 8),
> -+ par.cntr_rows, par.cntr_cols,
> -+ par.vs_rows, par.vs_cols,
> -+ (hd44780.read_char ? "En" : "Dis"),
> -+ (test_bit(_CHECK_BF, &hd44780_flags) ? "En" : "Dis"),
> -+ par.minor);
> -+
> -+ return (temp-buffer);
> -+}
> -+
> -+static int hd44780_proc_cgram(char *buffer, char **start, off_t offset, int size, int *eof, void *data)
> -+{
> -+ char *temp = buffer;
> -+ unsigned int i;
> -+
> -+ temp += sprintf(temp, "static void init_charmap(void)\n{\n"
> -+ "\t/*\n"
> -+ "\t * charmap[char mapped to cg0] = 0;\n"
> -+ "\t * charmap[char mapped to cg1] = 1;\n"
> -+ "\t * charmap[char mapped to cg2] = 2;\n"
> -+ "\t * charmap[char mapped to cg3] = 3;\n"
> -+ "\t * charmap[char mapped to cg4] = 4;\n"
> -+ "\t * charmap[char mapped to cg5] = 5;\n"
> -+ "\t * charmap[char mapped to cg6] = 6;\n"
> -+ "\t * charmap[char mapped to cg7] = 7;\n"
> -+ "\t */\n"
> -+ "}\n\n");
> -+
> -+ for (i = 0; i < 8; ++i) {
> -+ unsigned int j;
> -+ unsigned char cgram_buffer[8];
> -+
> -+ temp += sprintf(temp, "static unsigned char cg%u[] = { ", i);
> -+ hd44780_read_cgram_char(i, cgram_buffer);
> -+ for (j = 0; j < 8; ++j)
> -+ temp += sprintf(temp, "0x%.2x%s", cgram_buffer[j], (j == 7 ? " };\n" : ", "));
> -+ }
> -+
> -+ return (temp-buffer);
> -+}
> -+
> -+static void create_proc_entries(void)
> -+{
> -+ SET_PROC_LEVEL(0);
> -+ if (create_proc_read_entry("status", 0, hd44780.driver_proc_root, hd44780_proc_status, NULL) == NULL) {
> -+ printk(KERN_ERR "hd44780: cannot create /proc/lcd/%s/status\n", par.name);
> -+ return;
> -+ }
> -+ SET_PROC_LEVEL(1);
> -+ if (create_proc_read_entry("cgram.h", 0, hd44780.driver_proc_root, hd44780_proc_cgram, NULL) == NULL) {
> -+ printk(KERN_ERR "hd44780: cannot create /proc/lcd/%s/cgram.h\n", par.name);
> -+ return;
> -+ }
> -+ SET_PROC_LEVEL(2);
> -+}
> -+
> -+static void remove_proc_entries(void)
> -+{
> -+ switch (PROC_LEVEL) {
> -+ case 2:
> -+ remove_proc_entry("cgram.h", hd44780.driver_proc_root);
> -+ case 1:
> -+ remove_proc_entry("status", hd44780.driver_proc_root);
> -+ }
> -+ SET_PROC_LEVEL(0);
> -+}
> -+#endif
> -+
> -+/* Initialization */
> -+static int __init hd44780_init_module(void)
> -+{
> -+ int ret;
> -+
> -+#ifdef MODULE
> -+ if ((ret = request_module("lcd-linux"))) {
> -+ printk(KERN_ERR "hd44780: request_module() returned %d\n", ret);
> -+ if (ret < 0) {
> -+ if (ret != -ENOSYS) {
> -+ printk(KERN_ERR "hd44780: failure while loading module lcd-linux\n");
> -+ return (ret);
> -+ }
> -+ printk(KERN_ERR "hd44780: your kernel does not have kmod or kerneld support;\n");
> -+ printk(KERN_ERR "hd44780: remember to load the lcd-linux module before\n");
> -+ printk(KERN_ERR "hd44780: loading the hd44780 module\n");
> -+ }
> -+ }
> -+
> -+ if (flags != DFLT_FLAGS) par.flags = flags;
> -+ if (tabstop != DFLT_TABSTOP) par.tabstop = tabstop;
> -+ if (cntr_rows != DFLT_CNTR_ROWS) par.cntr_rows = cntr_rows;
> -+ if (cntr_cols != DFLT_CNTR_COLS) par.cntr_cols = cntr_cols;
> -+ if (vs_rows != DFLT_VS_ROWS) par.vs_rows = vs_rows;
> -+ if (vs_cols != DFLT_VS_COLS) par.vs_cols = vs_cols;
> -+ if (minor != HD44780_MINOR) par.minor = minor;
> -+#endif
> -+
> -+ lcd_driver_setup(&hd44780);
> -+ if ((ret = lcd_register_driver(&hd44780, &par)))
> -+ return (ret);
> -+
> -+#ifdef USE_PROC
> -+ if (hd44780.driver_proc_root)
> -+ create_proc_entries();
> -+#endif
> -+
> -+ printk(KERN_INFO "hd44780: ts72xx driver loaded\n" );
> -+
> -+ return (0);
> -+}
> -+
> -+static void __exit hd44780_cleanup_module(void)
> -+{
> -+#ifdef USE_PROC
> -+ if (hd44780.driver_proc_root)
> -+ remove_proc_entries();
> -+#endif
> -+
> -+ lcd_unregister_driver(&hd44780, &par);
> -+}
> -+
> -+module_init(hd44780_init_module)
> -+module_exit(hd44780_cleanup_module)
> -diff --git a/drivers/lcd-linux/lcd-linux.c b/drivers/lcd-linux/lcd-linux.c
> -new file mode 100644
> -index 0000000..8f9bc38
> ---- /dev/null
> -+++ b/drivers/lcd-linux/lcd-linux.c
> -@@ -0,0 +1,3023 @@
> -+/* lcd-linux.c
> -+ *
> -+ * $Id: lcd-linux.c,v 1.308 2010/03/03 14:56:22 mjona Exp $
> -+ *
> -+ * Software layer to drive LCD displays under Linux.
> -+ *
> -+ * Copyright (C) 2005 - 2009 Mattia Jona-Lasinio (mjona at users.sourceforge.net)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ */
> -+
> -+#include <linux/version.h>
> -+
> -+#ifndef KERNEL_VERSION
> -+#define KERNEL_VERSION(a, b, c) (((a) << 16) + ((b) << 8) + (c))
> -+#endif
> -+
> -+#ifndef LINUX_VERSION_CODE
> -+#error - LINUX_VERSION_CODE undefined in 'linux/version.h'
> -+#endif
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 33)
> -+#include <generated/autoconf.h>
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+#include <linux/autoconf.h>
> -+#else
> -+#include <linux/config.h>
> -+#endif
> -+
> -+#ifdef CONFIG_PROC_FS
> -+#define USE_PROC
> -+#else
> -+#undef USE_PROC
> -+#endif
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
> -+#include <linux/semaphore.h>
> -+#else
> -+#include <asm/semaphore.h>
> -+#endif
> -+
> -+#include <linux/bitops.h>
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+#include <linux/sched.h>
> -+
> -+#include <linux/fs.h>
> -+
> -+#include <asm/uaccess.h>
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+#include <linux/device.h>
> -+#endif
> -+#include <linux/init.h>
> -+#include <linux/list.h>
> -+#include <linux/slab.h>
> -+#include <linux/selection.h>
> -+#include <linux/vmalloc.h>
> -+
> -+#ifdef USE_PROC
> -+#include <linux/proc_fs.h>
> -+#endif
> -+
> -+#define LCD_LINUX_MAIN
> -+#include <linux/lcd-linux.h>
> -+
> -+static inline void __set_br(unsigned long *x, unsigned long val, unsigned long start, unsigned long len)
> -+{
> -+ unsigned long mask = (1 << len)-1;
> -+
> -+ if (val <= mask) {
> -+ mask <<= start;
> -+ val <<= start;
> -+ *x = (*x & ~mask) | val;
> -+ }
> -+}
> -+
> -+static inline unsigned long __get_br(unsigned long x, unsigned long start, unsigned long len)
> -+{
> -+ return ((x >> start) & ((1 << len)-1));
> -+}
> -+
> -+/*** struct_flags ***/
> -+
> -+/* internal flags: bits [0:15] of struct_flags (16 flags allowed) */
> -+#define NEED_WRAP 0 /* Next char will trigger a newline */
> -+#define DECIM 1 /* Insert mode */
> -+#define DECOM 2 /* Row origin of cursor: absolute or relative to scrolling region */
> -+#define DECAWM 3 /* Autowrap */
> -+#define DECSCNM 4 /* Inverted screen */
> -+#define CRLF 5 /* Follow lf, vt, ff, with a cr */
> -+#define INC_CURS_POS 6 /* Increment cursor position after data read/write */
> -+#define QUES 7 /* CSI Esc sequence contains a question mark */
> -+#define USER_SPACE 8 /* If set, the buffer pointed by arg in do_lcd_ioctl() is
> -+ * assumed to be in user space otherwise it is in kernel space */
> -+#define NULL_CHARMAP 9 /* The driver doesn't provide a charmap so the
> -+ * lcd-linux layer provides one*/
> -+#define CAN_DO_COLOR 10 /* The display is color capable */
> -+#define WITH_ATTR 11 /* If set, the void * buffer in do_lcd_read/write() contains
> -+ * attributes and therefore is an unsigned short * otherwise it
> -+ * is an unsigned char *
> -+ */
> -+
> -+/* input states: bits [24:27] of struct_flags (16 states allowed) */
> -+#define NORMAL 0 /* Normal mode */
> -+#define RAW 1 /* Raw mode (console emulation disabled) */
> -+#define SYN 2 /* Synchronous Idle mode */
> -+#define ESC 3 /* Escape mode */
> -+#define CSI 4 /* CSI escape mode */
> -+#define ESC_G0 5 /* G0 character set */
> -+#define ESC_G1 6 /* G1 character set */
> -+#define ESC_HASH 7 /* ESC # escape sequence */
> -+#define ESC_PERCENT 8 /* ESC % escape sequence */
> -+#define ARG 9 /* Waiting for arguments for the lcd-linux layer */
> -+#define ARG_DRIVER 10 /* Waiting for arguments for the display driver */
> -+
> -+#define SET_ESC_STATE(p, x) __set_br(&(p)->struct_flags, x, 16, 8)
> -+#define SET_INPUT_STATE(p, x) __set_br(&(p)->struct_flags, x, 24, 4)
> -+#define SET_INIT_LEVEL(p, x) __set_br(&(p)->struct_flags, x, 28, 2)
> -+#define SET_PROC_LEVEL(p, x) __set_br(&(p)->struct_flags, x, 30, 2)
> -+#define ESC_STATE(p) __get_br((p)->struct_flags, 16, 8)
> -+#define INPUT_STATE(p) __get_br((p)->struct_flags, 24, 4)
> -+#define INIT_LEVEL(p) __get_br((p)->struct_flags, 28, 2)
> -+#define PROC_LEVEL(p) __get_br((p)->struct_flags, 30, 2)
> -+
> -+/*** attributes ***/
> -+#define I_MASK 0x03 /* Intensity (0 = low, 1 = normal, 2 = bright) */
> -+#define ULINE 0x04 /* Underlined text */
> -+#define REVERSE 0x08 /* Reversed video text */
> -+#define BLINK 0x80 /* Blinking text */
> -+
> -+/*** Color attributes ***/
> -+#define FG_COLOR 0x07 /* Foreground color mask */
> -+#define FG_BRIGHT 0x08 /* Foreground bright color */
> -+#define FG_MASK (FG_BRIGHT | FG_COLOR) /* Foreground mask */
> -+#define BG_COLOR 0x70 /* Background color mask */
> -+#define BG_BRIGHT 0x80 /* Background bright color */
> -+#define BG_MASK (BG_BRIGHT | BG_COLOR) /* Background mask */
> -+
> -+#define NPAR 16 /* Max number of parameters in CSI escape sequence */
> -+#define FLIP_BUF_SIZE (1 << 6) /* Flip buffer size (64 bytes) MUST be a power of 2 */
> -+
> -+struct lcd_struct {
> -+ struct list_head lcd_list; /* Doubly linked list */
> -+ struct semaphore lcd_sem; /* Locks this structure */
> -+ struct lcd_driver *driver; /* The driver associated to this struct */
> -+ struct lcd_parameters *par; /* The parameters associated to this struct */
> -+ unsigned long struct_flags; /* Flags for internal use only */
> -+ unsigned int refcount; /* Number of references to this struct */
> -+
> -+ unsigned short *display; /* The display buffer */
> -+
> -+ unsigned short *fb; /* The virtual screen framebuffer */
> -+ unsigned int fb_size; /* Size of the framebuffer */
> -+ unsigned int frame_base; /* Offset of row 0, column 0 of a frame in fb */
> -+ unsigned int frame_size; /* Size of the frame */
> -+
> -+ unsigned int row; /* Current row in virtual screen */
> -+ unsigned int col; /* Current column in virtual screen */
> -+ unsigned int s_offset; /* Saved cursor position in virtual screen */
> -+
> -+ unsigned int top; /* Top scroll row in virtual screen */
> -+ unsigned int bot; /* Bottom scroll row in virtual screen */
> -+
> -+ int esc_args; /* Number of arguments for a normal escape sequence */
> -+ unsigned int csi_args[NPAR]; /* CSI parameters */
> -+ unsigned int index; /* Index in csi_args and counter for cgram characters generation */
> -+ unsigned char cgram_index; /* Index of the cgram character to be created */
> -+ unsigned char *cgram_buffer; /* Buffer for cgram operations in this driver */
> -+
> -+ unsigned short erase_char; /* Character to be used when erasing */
> -+ unsigned char attr; /* Current attributes */
> -+ unsigned char color; /* Color for normal intensity mode */
> -+ unsigned char s_color; /* Saved color for normal intensity mode */
> -+ unsigned char defcolor; /* Default color for normal intensity mode */
> -+ unsigned char ulcolor; /* Color for underline mode */
> -+ unsigned char halfcolor; /* Color for low intensity mode */
> -+ unsigned char attributes; /* Packed attributes */
> -+ unsigned char s_attributes; /* Saved packed attributes */
> -+
> -+ unsigned char *s_charmap; /* Saved character map for this driver */
> -+ unsigned char *flip_buf; /* High speed flip buffer */
> -+};
> -+
> -+/** Function prototypes **/
> -+
> -+/* Init/Cleanup the driver */
> -+static int init_driver(struct lcd_struct *);
> -+static int cleanup_driver(struct lcd_struct *);
> -+
> -+/* Read from/Write to the driver */
> -+static void read_data(struct lcd_struct *, unsigned short *);
> -+static void read_cgram(struct lcd_struct *, unsigned char, unsigned char *);
> -+static void write_data(struct lcd_struct *, unsigned short);
> -+static void write_cgram(struct lcd_struct *, unsigned char, unsigned char *);
> -+
> -+/* Input handlers */
> -+static void cr(struct lcd_struct *);
> -+static void lf(struct lcd_struct *);
> -+static void control_char(struct lcd_struct *, unsigned char);
> -+static void handle_csi(struct lcd_struct *, unsigned char);
> -+static int handle_custom_esc(struct lcd_struct *, unsigned int);
> -+static int handle_esc(struct lcd_struct *, unsigned char);
> -+static void handle_input(struct lcd_struct *, unsigned short);
> -+
> -+/* Low level file operations */
> -+static ssize_t do_lcd_read(struct lcd_struct *, void *, size_t);
> -+static ssize_t do_lcd_write(struct lcd_struct *, const void *, size_t);
> -+static int do_lcd_open(struct lcd_struct *);
> -+static int do_lcd_release(struct lcd_struct *);
> -+static int do_lcd_ioctl(struct lcd_struct *, unsigned int, unsigned long);
> -+
> -+/* Proc functions */
> -+#ifdef USE_PROC
> -+static void create_driver_proc_entries(struct lcd_struct *);
> -+static void remove_driver_proc_entries(struct lcd_struct *);
> -+#endif
> -+
> -+/* globals */
> -+static unsigned int major = LCD_MAJOR; /* Major number for LCD-Linux device */
> -+static unsigned short minors = LCD_MINORS; /* Minor numbers allocated for LCD-Linux */
> -+static LIST_HEAD(lcd_drivers); /* Registered lcd drivers */
> -+static struct semaphore drivers_sem; /* Locks the lcd_drivers list */
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+static struct class *lcd_linux_class;
> -+#endif
> -+#ifdef USE_PROC
> -+static struct proc_dir_entry *lcd_proc_root;
> -+#endif
> -+/* End of globals */
> -+
> -+#ifdef MODULE
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+#include <linux/device.h>
> -+MODULE_ALIAS_CHARDEV_MAJOR(LCD_MAJOR);
> -+#endif
> -+MODULE_DESCRIPTION("Software layer to drive LCD displays under Linux.");
> -+MODULE_AUTHOR("Mattia Jona-Lasinio <mjona at users.sourceforge.net>");
> -+#ifdef MODULE_LICENSE
> -+MODULE_LICENSE("GPL");
> -+#endif
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+module_param(minors, ushort, 0444);
> -+#else
> -+MODULE_PARM(minors, "h");
> -+#endif
> -+MODULE_PARM_DESC(minors, "Minor numbers allocated for LCD-Linux (default: " string(LCD_MINORS) ")");
> -+#else
> -+
> -+/*
> -+ * Parse boot command line
> -+ *
> -+ * lcd=minors
> -+ */
> -+static int __init lcd_linux_boot_init(char *cmdline)
> -+{
> -+ unsigned short args;
> -+
> -+ if ((args = simple_strtoul(cmdline, NULL, 0)))
> -+ minors = args;
> -+
> -+ return (1);
> -+}
> -+
> -+__setup("lcd=", lcd_linux_boot_init);
> -+#endif /* MODULE */
> -+
> -+/* Macros for iterator handling */
> -+static inline unsigned int iterator_inc_(unsigned int iterator, const unsigned int module)
> -+{
> -+ return ((++iterator)%module);
> -+}
> -+
> -+static inline unsigned int iterator_dec_(unsigned int iterator, const unsigned int module)
> -+{
> -+ return (iterator ? --iterator : module-1);
> -+}
> -+
> -+#define iterator_inc(iterator, module) (iterator = iterator_inc_(iterator, module))
> -+#define iterator_dec(iterator, module) (iterator = iterator_dec_(iterator, module))
> -+
> -+/* Uncomment the following two lines
> -+ * for non-atomic set_bit and clear_bit
> -+ */
> -+//#define set_bit __set_bit
> -+//#define clear_bit __clear_bit
> -+
> -+/************************************
> -+ * Low level routines and utilities *
> -+ ************************************/
> -+/*
> -+ * Set whether the address counter should be incremented
> -+ * or decremented after a Read/Write
> -+ */
> -+static void address_mode(struct lcd_struct *p, int mode)
> -+{
> -+ struct lcd_driver *driver = p->driver;
> -+
> -+ if (mode > 0 && ! test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (driver->address_mode)
> -+ driver->address_mode(mode);
> -+ set_bit(INC_CURS_POS, &p->struct_flags);
> -+ } else if (mode < 0 && test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (driver->address_mode)
> -+ driver->address_mode(mode);
> -+ clear_bit(INC_CURS_POS, &p->struct_flags);
> -+ }
> -+}
> -+
> -+/* WARNING!! This function returns an int because if iterator is not
> -+ * within the visible area of the frame it returns -1
> -+ */
> -+static inline int vs_to_frame_(struct lcd_struct *p, unsigned int iterator)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int row = iterator/vs_cols;
> -+ unsigned int col = iterator%vs_cols;
> -+ unsigned int frame_base_row = p->frame_base/vs_cols;
> -+ unsigned int frame_base_col = p->frame_base%vs_cols;
> -+ unsigned int frame_rows = p->par->cntr_rows*p->par->num_cntr;
> -+ unsigned int frame_cols = p->par->cntr_cols;
> -+
> -+ if (vs_rows == frame_rows && vs_cols == frame_cols)
> -+ return (iterator);
> -+
> -+ if (row < frame_base_row || row >= frame_base_row+frame_rows)
> -+ return (-1);
> -+ if (col < frame_base_col || col >= frame_base_col+frame_cols)
> -+ return (-1);
> -+
> -+ return ((row-frame_base_row)*frame_cols+(col-frame_base_col));
> -+}
> -+
> -+/* Given 'iterator' in vs, returns the offset in vs corresponding to the nearest
> -+ * visible offset in vs, or returns 'iterator' if it is already visible.
> -+ */
> -+static unsigned int round_vs_(struct lcd_struct *p, unsigned int iterator)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int row = iterator/vs_cols;
> -+ unsigned int col = iterator%vs_cols;
> -+ unsigned int frame_base_row = p->frame_base/vs_cols;
> -+ unsigned int frame_base_col = p->frame_base%vs_cols;
> -+ unsigned int frame_rows = p->par->cntr_rows*p->par->num_cntr;
> -+ unsigned int frame_cols = p->par->cntr_cols;
> -+
> -+ if (vs_rows == frame_rows && vs_cols == frame_cols)
> -+ return (iterator);
> -+
> -+ if (row < frame_base_row)
> -+ row = frame_base_row;
> -+ else if (row >= frame_base_row+frame_rows)
> -+ row = frame_base_row+(frame_rows-1);
> -+
> -+ if (col < frame_base_col)
> -+ col = frame_base_col;
> -+ else if (col >= frame_base_col+frame_cols)
> -+ col = frame_base_col+(frame_cols-1);
> -+
> -+ return ((row*vs_cols)+col);
> -+}
> -+
> -+#define round_vs(p, iterator) (iterator = round_vs_(p, iterator))
> -+
> -+/*
> -+ * Sync the frame area starting at offset s, ending at offset e with fb content.
> -+ */
> -+static void redraw_screen(struct lcd_struct *p, unsigned int s, unsigned int e)
> -+{
> -+ unsigned int len;
> -+ unsigned int row = p->row, col = p->col;
> -+ unsigned int inc_set = test_bit(INC_CURS_POS, &p->struct_flags);
> -+ unsigned int frame_cols = p->par->cntr_cols;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned long flags;
> -+
> -+ if (s >= p->fb_size || e >= p->fb_size || e < s || e < p->frame_base)
> -+ return;
> -+
> -+ round_vs(p, s);
> -+ round_vs(p, e);
> -+
> -+ len = 1+e-s;
> -+
> -+ if (! inc_set)
> -+ s = e;
> -+
> -+ p->row = s/vs_cols;
> -+ p->col = s%vs_cols;
> -+
> -+ flags = p->struct_flags;
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ clear_bit(DECIM, &p->struct_flags);
> -+ set_bit(DECAWM, &p->struct_flags);
> -+ SET_INPUT_STATE(p, RAW);
> -+ if (inc_set)
> -+ while (len--)
> -+ if (vs_to_frame_(p, (p->row*vs_cols)+p->col) < 0) {
> -+ s += vs_cols-frame_cols;
> -+ len -= vs_cols-frame_cols-1;
> -+ p->row = s/vs_cols;
> -+ p->col = s%vs_cols;
> -+ } else {
> -+ write_data(p, p->fb[s++]);
> -+ if (test_bit(NEED_WRAP, &p->struct_flags)) {
> -+ cr(p);
> -+ lf(p);
> -+ }
> -+ }
> -+ else
> -+ while (len--)
> -+ if (vs_to_frame_(p, (p->row*vs_cols)+p->col) < 0) {
> -+ s -= vs_cols-frame_cols;
> -+ len -= vs_cols-frame_cols-1;
> -+ p->row = s/vs_cols;
> -+ p->col = s%vs_cols;
> -+ } else {
> -+ write_data(p, p->fb[s--]);
> -+ if (test_bit(NEED_WRAP, &p->struct_flags)) {
> -+ cr(p);
> -+ lf(p);
> -+ }
> -+ }
> -+ p->struct_flags = flags;
> -+
> -+ p->row = row; p->col = col;
> -+}
> -+
> -+static int show_cursor(struct lcd_struct *p)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int frame_base, frame_base_row, frame_base_col;
> -+ unsigned int frame_rows = p->par->cntr_rows*p->par->num_cntr;
> -+ unsigned int frame_cols = p->par->cntr_cols;
> -+ unsigned int tmp = frame_cols/2;
> -+
> -+ if (vs_rows == frame_rows && vs_cols == frame_cols)
> -+ return (0);
> -+
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ /* cursor always on the lowest row of the display */
> -+ frame_base_row = 0;
> -+ frame_base_col = 0;
> -+ if (p->row >= frame_rows)
> -+ frame_base_row = p->row-(frame_rows-1);
> -+ if (p->col >= frame_cols) {
> -+ frame_base_col = p->col-(frame_cols-1);
> -+ if (tmp) {
> -+ tmp = (tmp-(frame_base_col%tmp))%tmp;
> -+ if (frame_base_col+tmp <= vs_cols-frame_cols)
> -+ frame_base_col += tmp;
> -+ }
> -+ }
> -+ } else {
> -+ /* cursor always on the uppermost row of the display */
> -+ frame_base_row = vs_rows-frame_rows;
> -+ frame_base_col = vs_cols-frame_cols;
> -+ if (p->row < vs_rows-frame_rows)
> -+ frame_base_row = p->row;
> -+ if (p->col < vs_cols-frame_cols) {
> -+ frame_base_col = p->col;
> -+ if (tmp) {
> -+ tmp = frame_base_col%tmp;
> -+ if (frame_base_col >= tmp)
> -+ frame_base_col -= tmp;
> -+ }
> -+ }
> -+ }
> -+
> -+ frame_base = p->frame_base;
> -+ p->frame_base = (frame_base_row*vs_cols)+frame_base_col;
> -+
> -+ return (frame_base != p->frame_base);
> -+}
> -+
> -+/*
> -+ * Move the visible screen area at user's wish
> -+ */
> -+static void browse_screen(struct lcd_struct *p, unsigned char dir)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int frame_base_row = p->frame_base/vs_cols;
> -+ unsigned int frame_base_col = p->frame_base%vs_cols;
> -+ unsigned int frame_rows = p->par->cntr_rows*p->par->num_cntr;
> -+ unsigned int frame_cols = p->par->cntr_cols;
> -+
> -+ switch (dir) {
> -+ case '1': /* Up */
> -+ if (! frame_base_row)
> -+ return;
> -+ --frame_base_row;
> -+ break;
> -+ case '2': /* Down */
> -+ if (frame_base_row >= vs_rows-frame_rows)
> -+ return;
> -+ ++frame_base_row;
> -+ break;
> -+ case '3': /* Left */
> -+ if (! frame_base_col)
> -+ return;
> -+ --frame_base_col;
> -+ break;
> -+ case '4': /* Right */
> -+ if (frame_base_col >= vs_cols-frame_cols)
> -+ return;
> -+ ++frame_base_col;
> -+ break;
> -+ default:
> -+ return;
> -+ }
> -+
> -+ p->frame_base = (frame_base_row*vs_cols)+frame_base_col;
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+}
> -+
> -+static inline void __memset_short(unsigned short *buf, unsigned short c, unsigned int len)
> -+{
> -+ while (len--)
> -+ *buf++ = c;
> -+}
> -+
> -+/*
> -+ * A memset implementation writing to LCD instead of memory locations.
> -+ */
> -+static void lcd_memset(struct lcd_struct *p, unsigned int d, unsigned short c, unsigned int len)
> -+{
> -+ unsigned int inc_set = test_bit(INC_CURS_POS, &p->struct_flags);
> -+
> -+ if (! len || d >= p->fb_size)
> -+ return;
> -+
> -+ if (inc_set && d+len > p->fb_size)
> -+ len = p->fb_size-d;
> -+ else if (! inc_set && len > d+1)
> -+ len = d+1;
> -+
> -+ if (! inc_set)
> -+ d -= len-1;
> -+ __memset_short(p->fb+d, c, len);
> -+
> -+ if (show_cursor(p))
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+ else
> -+ redraw_screen(p, d, d+(len-1));
> -+}
> -+
> -+static inline void __memcpy_short(unsigned short *d, unsigned short *s, unsigned int len, int dir)
> -+{
> -+ if (dir > 0)
> -+ while (len--)
> -+ *d++ = *s++;
> -+ else
> -+ while (len--)
> -+ *d-- = *s--;
> -+}
> -+
> -+/*
> -+ * A memmove implementation writing to LCD instead of memory locations.
> -+ * Copy is done in a non destructive way. Display regions may overlap.
> -+ */
> -+static void lcd_memmove(struct lcd_struct *p, unsigned int d, unsigned int s, unsigned int len)
> -+{
> -+ if (! len || d == s || d >= p->fb_size || s >= p->fb_size)
> -+ return;
> -+
> -+ if (d < s) {
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (s+len > p->fb_size)
> -+ len = p->fb_size-s;
> -+ } else {
> -+ if (len > d+1)
> -+ len = d+1;
> -+ d -= len-1;
> -+ s -= len-1;
> -+ }
> -+ __memcpy_short(p->fb+d, p->fb+s, len, 1);
> -+ if (show_cursor(p))
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+ else
> -+ redraw_screen(p, d, d+(len-1));
> -+ } else {
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (d+len > p->fb_size)
> -+ len = p->fb_size-d;
> -+ d += len-1;
> -+ s += len-1;
> -+ } else {
> -+ if (len > s+1)
> -+ len = s+1;
> -+ }
> -+ __memcpy_short(p->fb+d, p->fb+s, len, -1);
> -+ if (show_cursor(p))
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+ else
> -+ redraw_screen(p, d-(len-1), d);
> -+ }
> -+}
> -+
> -+static void scrup(struct lcd_struct *p, unsigned int t, unsigned int b, unsigned int nr)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int d, s;
> -+
> -+ if (t+nr >= b)
> -+ nr = b-t-1;
> -+ if (b > vs_rows || t >= b || nr < 1)
> -+ return;
> -+ d = t*vs_cols;
> -+ s = (t+nr)*vs_cols;
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ lcd_memmove(p, d, s, (b-t-nr)*vs_cols);
> -+ lcd_memset(p, d+(b-t-nr)*vs_cols, p->erase_char, nr*vs_cols);
> -+ } else {
> -+ lcd_memmove(p, d+(b-t-nr)*vs_cols-1, s+(b-t-nr)*vs_cols-1, (b-t-nr)*vs_cols);
> -+ lcd_memset(p, d+(b-t)*vs_cols-1, p->erase_char, nr*vs_cols);
> -+ }
> -+}
> -+
> -+static void scrdown(struct lcd_struct *p, unsigned int t, unsigned int b, unsigned int nr)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int d, s;
> -+
> -+ if (t+nr >= b)
> -+ nr = b-t-1;
> -+ if (b > vs_rows || t >= b || nr < 1)
> -+ return;
> -+ s = t*vs_cols;
> -+ d = (t+nr)*vs_cols;
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ lcd_memmove(p, d, s, (b-t-nr)*vs_cols);
> -+ lcd_memset(p, s, p->erase_char, nr*vs_cols);
> -+ } else {
> -+ lcd_memmove(p, d+(b-t-nr)*vs_cols-1, s+(b-t-nr)*vs_cols-1, (b-t-nr)*vs_cols);
> -+ lcd_memset(p, s+nr*vs_cols-1, p->erase_char, nr*vs_cols);
> -+ }
> -+}
> -+
> -+static void lcd_insert_char(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int pos = (p->row*vs_cols)+p->col;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags))
> -+ lcd_memmove(p, pos+nr, pos, vs_cols-p->col-nr);
> -+ else
> -+ lcd_memmove(p, pos-nr, pos, p->col-(nr-1));
> -+ lcd_memset(p, pos, p->erase_char, nr);
> -+}
> -+
> -+static void lcd_delete_char(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int pos = (p->row*vs_cols)+p->col;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ lcd_memmove(p, pos, pos+nr, vs_cols-(p->col+nr));
> -+ lcd_memset(p, (p->row+1)*vs_cols-nr, p->erase_char, nr);
> -+ } else {
> -+ lcd_memmove(p, pos, pos-nr, p->col-(nr-1));
> -+ lcd_memset(p, (p->row*vs_cols)+(nr-1), p->erase_char, nr);
> -+ }
> -+}
> -+
> -+
> -+
> -+
> -+
> -+/******************************************************************************
> -+ ************************* VT 102 Emulation *************************
> -+ ******************************************************************************/
> -+
> -+/**********************
> -+ * Control characters *
> -+ **********************/
> -+static void bs(struct lcd_struct *p)
> -+{
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (p->col)
> -+ --p->col;
> -+ } else {
> -+ if (p->col+1 < p->par->vs_cols)
> -+ ++p->col;
> -+ }
> -+}
> -+
> -+static void cr(struct lcd_struct *p)
> -+{
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ p->col = (test_bit(INC_CURS_POS, &p->struct_flags) ? 0 : p->par->vs_cols-1);
> -+}
> -+
> -+static void lf(struct lcd_struct *p)
> -+{
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (p->row+1 < p->bot)
> -+ ++p->row;
> -+ else if (INPUT_STATE(p) != RAW) {
> -+ show_cursor(p);
> -+ scrup(p, p->top, p->bot, 1);
> -+ }
> -+ } else {
> -+ if (p->row > p->top)
> -+ --p->row;
> -+ else if (INPUT_STATE(p) != RAW) {
> -+ show_cursor(p);
> -+ scrdown(p, p->top, p->bot, 1);
> -+ }
> -+ }
> -+}
> -+
> -+static void ri(struct lcd_struct *p)
> -+{
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (p->row > p->top)
> -+ --p->row;
> -+ else {
> -+ show_cursor(p);
> -+ scrdown(p, p->top, p->bot, 1);
> -+ }
> -+ } else {
> -+ if (p->row+1 < p->bot)
> -+ ++p->row;
> -+ else {
> -+ show_cursor(p);
> -+ scrup(p, p->top, p->bot, 1);
> -+ }
> -+ }
> -+}
> -+
> -+static void ff(struct lcd_struct *p)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (p->driver->clear_display) {
> -+ p->driver->clear_display();
> -+ __memset_short(p->fb, p->erase_char, p->fb_size);
> -+ __memset_short(p->display, p->erase_char, p->frame_size);
> -+ p->frame_base = 0;
> -+ } else if (test_bit(INC_CURS_POS, &p->struct_flags))
> -+ lcd_memset(p, 0, p->erase_char, p->fb_size);
> -+ else
> -+ lcd_memset(p, p->fb_size-1, p->erase_char, p->fb_size);
> -+
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags))
> -+ p->row = p->col = 0;
> -+ else {
> -+ p->row = vs_rows-1;
> -+ p->col = vs_cols-1;
> -+ }
> -+}
> -+
> -+static void tab(struct lcd_struct *p)
> -+{
> -+ struct lcd_parameters *par = p->par;
> -+ unsigned int i, vs_cols = par->vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+
> -+ if (! par->tabstop)
> -+ return;
> -+
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ i = par->tabstop-(p->col%par->tabstop);
> -+ if (p->col+i < vs_cols)
> -+ p->col += i;
> -+ } else {
> -+ i = p->col%par->tabstop;
> -+ i = (i == 0 ? par->tabstop : i);
> -+ if (p->col >= i)
> -+ p->col -= i;
> -+ }
> -+}
> -+
> -+/*
> -+ * Control character handler.
> -+ */
> -+static void control_char(struct lcd_struct *p, unsigned char val)
> -+{
> -+ switch (val) {
> -+ case 0x08: /* BS: Back Space (^H) */
> -+ case 0x7f: /* DEL: Delete */
> -+ bs(p);
> -+ return;
> -+
> -+ case 0x09: /* HT: Horizontal Tab (^I) */
> -+ tab(p);
> -+ return;
> -+
> -+ case 0x0c: /* FF: Form Feed (^L) */
> -+ ff(p);
> -+ return;
> -+
> -+ case 0x0a: /* LF: Line Feed (^J) */
> -+ case 0x0b: /* VT: Vertical Tab (^K) */
> -+ lf(p);
> -+ if (! test_bit(CRLF, &p->struct_flags))
> -+ return;
> -+
> -+ case 0x0d: /* CR: Carriage Return (^M) */
> -+ cr(p);
> -+ return;
> -+
> -+ case 0x16: /* SYN: Synchronous Idle (^V) */
> -+ SET_INPUT_STATE(p, SYN);
> -+ return;
> -+
> -+ case 0x1b: /* ESC: Start of escape sequence */
> -+ SET_INPUT_STATE(p, ESC);
> -+ return;
> -+
> -+ case 0x9b: /* CSI: Start of CSI escape sequence */
> -+ memset(p->csi_args, 0, sizeof(p->csi_args));
> -+ p->index = 0;
> -+ SET_INPUT_STATE(p, CSI);
> -+ return;
> -+ }
> -+}
> -+
> -+static void gotoxy(struct lcd_struct *p, int new_col, int new_row)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ int min_row, max_row;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (test_bit(DECOM, &p->struct_flags)) {
> -+ min_row = p->top;
> -+ max_row = p->bot;
> -+ } else {
> -+ min_row = 0;
> -+ max_row = vs_rows;
> -+ }
> -+
> -+ if (new_row < min_row)
> -+ p->row = min_row;
> -+ else if (new_row >= max_row)
> -+ p->row = max_row-1;
> -+ else
> -+ p->row = new_row;
> -+
> -+ if (new_col < 0)
> -+ p->col = 0;
> -+ else if (new_col >= vs_cols)
> -+ p->col = vs_cols-1;
> -+ else
> -+ p->col = new_col;
> -+
> -+ if (show_cursor(p))
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+}
> -+
> -+static void gotoxay(struct lcd_struct *p, int new_col, int new_row)
> -+{
> -+ gotoxy(p, new_col, test_bit(DECOM, &p->struct_flags) ? (p->top+new_row) : new_row);
> -+}
> -+
> -+
> -+/******************************
> -+ * ECMA-48 CSI ESC- sequences *
> -+ ******************************/
> -+static void csi_at(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ if (p->col+nr > vs_cols)
> -+ nr = vs_cols-p->col;
> -+ else if (! nr)
> -+ ++nr;
> -+ lcd_insert_char(p, nr);
> -+}
> -+
> -+static void csi_J(struct lcd_struct *p, unsigned int action)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int pos = (p->row*vs_cols)+p->col;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ switch (action) {
> -+ case 0: /* From cursor to end of display */
> -+ lcd_memset(p, pos, p->erase_char, p->fb_size-pos);
> -+ return;
> -+
> -+ case 1: /* From start of display to cursor */
> -+ lcd_memset(p, 0, p->erase_char, pos+1);
> -+ return;
> -+
> -+ case 2: /* Whole display */
> -+ lcd_memset(p, 0, p->erase_char, p->fb_size);
> -+ return;
> -+ }
> -+}
> -+
> -+static void csi_K(struct lcd_struct *p, unsigned int action)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int row_start = p->row*vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ switch (action) {
> -+ case 0: /* From cursor to end of line */
> -+ lcd_memset(p, row_start+p->col, p->erase_char, vs_cols-p->col);
> -+ return;
> -+
> -+ case 1: /* From start of line to cursor */
> -+ lcd_memset(p, row_start, p->erase_char, p->col+1);
> -+ return;
> -+
> -+ case 2: /* Whole line */
> -+ lcd_memset(p, row_start, p->erase_char, vs_cols);
> -+ return;
> -+ }
> -+}
> -+
> -+static void csi_L(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (p->row+nr > vs_rows)
> -+ nr = vs_rows-p->row;
> -+ else if (! nr)
> -+ ++nr;;
> -+ lcd_memmove(p, (p->row+nr)*vs_cols, p->row*vs_cols, (vs_rows-p->row-nr)*vs_cols);
> -+ lcd_memset(p, p->row*vs_cols, p->erase_char, nr*vs_cols);
> -+}
> -+
> -+static void csi_M(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (p->row+nr > vs_rows)
> -+ nr = vs_rows-p->row;
> -+ else if (! nr)
> -+ ++nr;;
> -+ lcd_memmove(p, p->row*vs_cols, (p->row+nr)*vs_cols, (vs_rows-p->row-nr)*vs_cols);
> -+ lcd_memset(p, (vs_rows-nr)*vs_cols, p->erase_char, nr*vs_cols);
> -+}
> -+
> -+static void csi_P(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ if (p->col+nr > vs_cols)
> -+ nr = vs_cols-p->col;
> -+ else if (! nr)
> -+ ++nr;
> -+ lcd_delete_char(p, nr);
> -+}
> -+
> -+static void csi_X(struct lcd_struct *p, unsigned int nr)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (p->col+nr > vs_cols)
> -+ nr = vs_cols-p->col;
> -+ else if (! nr)
> -+ ++nr;
> -+ lcd_memset(p, (p->row*vs_cols)+p->col, p->erase_char, nr);
> -+}
> -+
> -+static void csi_su(struct lcd_struct *p, unsigned char input)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ if (input == 'u') {
> -+ p->row = p->s_offset/vs_cols;
> -+ p->col = p->s_offset%vs_cols;
> -+ p->color = p->s_color;
> -+ p->attributes = p->s_attributes;
> -+ return;
> -+ }
> -+ p->s_offset = (p->row*vs_cols)+p->col;
> -+ p->s_color = p->color;
> -+ p->s_attributes = p->attributes;
> -+}
> -+
> -+static inline unsigned char reverse_color_attr(unsigned char attr)
> -+{
> -+ return ((attr & (BG_BRIGHT | FG_BRIGHT)) | ((attr & BG_COLOR) >> 4) | ((attr & FG_COLOR) << 4));
> -+}
> -+
> -+static unsigned char build_attr(struct lcd_struct *p, unsigned char color, unsigned char intensity,
> -+ unsigned char blink, unsigned char underline, unsigned char reverse)
> -+{
> -+ unsigned char attr;
> -+
> -+ if (test_bit(CAN_DO_COLOR, &p->struct_flags)) {
> -+ attr = color;
> -+ if (underline)
> -+ attr = (attr & BG_MASK) | p->ulcolor;
> -+ else if (intensity == 0)
> -+ attr = (attr & BG_MASK) | p->halfcolor;
> -+ if (reverse)
> -+ attr = reverse_color_attr(attr);
> -+ if (blink)
> -+ attr ^= BG_BRIGHT;
> -+ if (intensity == 2)
> -+ attr ^= FG_BRIGHT;
> -+ } else {
> -+ attr = intensity;
> -+ attr |= (underline ? ULINE : 0x00);
> -+ attr |= (reverse ? REVERSE : 0x00);
> -+ attr |= (blink ? BLINK : 0x00);
> -+ }
> -+
> -+ return (attr);
> -+}
> -+
> -+static void update_attr(struct lcd_struct *p)
> -+{
> -+ unsigned char intensity = p->attributes & I_MASK;
> -+ unsigned char underline = (p->attributes & ULINE) ? 0x01 : 0x00;
> -+ unsigned char reverse = (p->attributes & REVERSE) ? 0x01 : 0x00;
> -+ unsigned char blink = (p->attributes & BLINK) ? 0x01 : 0x00;
> -+ unsigned char decscnm = test_bit(DECSCNM, &p->struct_flags) ? 0x01 : 0x00;
> -+
> -+ p->attr = build_attr(p, p->color, intensity, blink, underline, reverse ^ decscnm);
> -+ p->erase_char = (build_attr(p, p->color, 1, blink, 0, decscnm) << 8) | ' ';
> -+}
> -+
> -+static void default_attr(struct lcd_struct *p)
> -+{
> -+ p->attributes = 0x01;
> -+ p->color = p->defcolor;
> -+}
> -+
> -+static void lcd_invert_screen(struct lcd_struct *p, unsigned int s, unsigned int len)
> -+{
> -+ unsigned int l, inc_set = test_bit(INC_CURS_POS, &p->struct_flags);
> -+
> -+ if (! len || s >= p->fb_size)
> -+ return;
> -+ if (inc_set && s+len > p->fb_size)
> -+ len = p->fb_size-s;
> -+ else if (! inc_set && len > s+1)
> -+ len = s+1;
> -+
> -+ l = len;
> -+ if (test_bit(CAN_DO_COLOR, &p->struct_flags))
> -+ while (l--) {
> -+ p->fb[s] = (reverse_color_attr(p->fb[s] >> 8) << 8) | (p->fb[s] & 0xff);
> -+ ++s;
> -+ }
> -+ else
> -+ while (l--) {
> -+ p->fb[s] ^= REVERSE << 8;
> -+ ++s;
> -+ }
> -+
> -+ if (show_cursor(p))
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+ else
> -+ redraw_screen(p, s, s+(len-1));
> -+}
> -+
> -+static void csi_m(struct lcd_struct *p, unsigned int n)
> -+{
> -+ int i, arg;
> -+
> -+ for (i = 0; i <= n; ++i)
> -+ switch ((arg = p->csi_args[i]))
> -+ {
> -+ case 0:
> -+ default_attr(p);
> -+ break;
> -+
> -+ case 1:
> -+ p->attributes = (p->attributes & ~I_MASK) | 2;
> -+ break;
> -+
> -+ case 2:
> -+ p->attributes = (p->attributes & ~I_MASK) | 0;
> -+ break;
> -+
> -+ case 4:
> -+ p->attributes |= ULINE;
> -+ break;
> -+
> -+ case 5:
> -+ p->attributes |= BLINK;
> -+ break;
> -+
> -+ case 7:
> -+ p->attributes |= REVERSE;
> -+ break;
> -+
> -+ case 21: case 22:
> -+ p->attributes = (p->attributes & ~I_MASK) | 1;
> -+ break;
> -+
> -+ case 24:
> -+ p->attributes &= ~ULINE;
> -+ break;
> -+
> -+ case 25:
> -+ p->attributes &= ~BLINK;
> -+ break;
> -+
> -+ case 27:
> -+ p->attributes &= ~REVERSE;
> -+ break;
> -+
> -+ case 38:
> -+ p->attributes |= ULINE;
> -+ p->color = (p->color & BG_MASK) | (p->defcolor & FG_MASK);
> -+ break;
> -+
> -+ case 39:
> -+ p->attributes &= ~ULINE;
> -+ p->color = (p->color & BG_MASK) | (p->defcolor & FG_MASK);
> -+ break;
> -+
> -+ case 49:
> -+ p->color = (p->defcolor & BG_MASK) | (p->color & FG_MASK);
> -+ break;
> -+
> -+ default:
> -+ if (arg >= 30 && arg <= 37)
> -+ p->color = (p->color & BG_MASK) | color_table[arg-30];
> -+ else if (arg >= 40 && arg <= 47)
> -+ p->color = (p->color & FG_MASK) | (color_table[arg-40] << 4);
> -+ break;
> -+ }
> -+
> -+ update_attr(p);
> -+}
> -+
> -+static void csi_h(struct lcd_struct *p, unsigned char n)
> -+{
> -+ switch (n) {
> -+ case 4: /* Set insert mode */
> -+ set_bit(DECIM, &p->struct_flags);
> -+ return;
> -+
> -+ case 5: /* Inverted screen mode */
> -+ if (test_bit(QUES, &p->struct_flags) && ! test_bit(DECSCNM, &p->struct_flags)) {
> -+ lcd_invert_screen(p, 0, p->fb_size);
> -+ set_bit(DECSCNM, &p->struct_flags);
> -+ update_attr(p);
> -+ }
> -+ return;
> -+
> -+ case 6: /* Cursor addressing origin: relative to scrolling region */
> -+ if (test_bit(QUES, &p->struct_flags)) {
> -+ set_bit(DECOM, &p->struct_flags);
> -+ gotoxay(p, 0, 0);
> -+ }
> -+ return;
> -+
> -+ case 7: /* Set autowrap */
> -+ if (test_bit(QUES, &p->struct_flags))
> -+ set_bit(DECAWM, &p->struct_flags);
> -+ return;
> -+
> -+ case 20: /* Set cr lf */
> -+ set_bit(CRLF, &p->struct_flags);
> -+ return;
> -+ }
> -+}
> -+
> -+static void csi_l(struct lcd_struct *p, unsigned char n)
> -+{
> -+ switch (n) {
> -+ case 4: /* Reset insert mode */
> -+ clear_bit(DECIM, &p->struct_flags);
> -+ return;
> -+
> -+ case 5: /* Normal screen mode */
> -+ if (test_bit(QUES, &p->struct_flags) && test_bit(DECSCNM, &p->struct_flags)) {
> -+ lcd_invert_screen(p, 0, p->fb_size);
> -+ clear_bit(DECSCNM, &p->struct_flags);
> -+ update_attr(p);
> -+ }
> -+ return;
> -+
> -+ case 6: /* Cursor addressing origin: absolute origin */
> -+ if (test_bit(QUES, &p->struct_flags)) {
> -+ clear_bit(DECOM, &p->struct_flags);
> -+ gotoxay(p, 0, 0);
> -+ }
> -+ return;
> -+
> -+ case 7: /* Reset autowrap */
> -+ if (test_bit(QUES, &p->struct_flags))
> -+ clear_bit(DECAWM, &p->struct_flags);
> -+ return;
> -+
> -+ case 20: /* Reset cr lf */
> -+ clear_bit(CRLF, &p->struct_flags);
> -+ return;
> -+ }
> -+}
> -+
> -+static void csi_linux(struct lcd_struct *p)
> -+{
> -+ switch (p->csi_args[0]) {
> -+ case 1:
> -+ if (test_bit(CAN_DO_COLOR, &p->struct_flags) && p->csi_args[1] < 16) {
> -+ p->ulcolor = color_table[p->csi_args[1]];
> -+ if (p->attributes & ULINE)
> -+ update_attr(p);
> -+ }
> -+ return;
> -+
> -+ case 2:
> -+ if (test_bit(CAN_DO_COLOR, &p->struct_flags) && p->csi_args[1] < 16) {
> -+ p->halfcolor = color_table[p->csi_args[1]];
> -+ if ((p->attributes & I_MASK) == 0)
> -+ update_attr(p);
> -+ }
> -+ return;
> -+
> -+ case 8:
> -+ p->defcolor = p->color;
> -+ default_attr(p);
> -+ update_attr(p);
> -+ return;
> -+ }
> -+}
> -+
> -+static void csi_r(struct lcd_struct *p, unsigned int top, unsigned int bot)
> -+{
> -+ /* Minimum allowed region is 2 lines */
> -+ if (top < bot) {
> -+ p->top = top-1;
> -+ p->bot = bot;
> -+ gotoxay(p, 0, 0);
> -+ }
> -+}
> -+
> -+/*
> -+ * ECMA-48 CSI ESC- sequence handler.
> -+ */
> -+static void handle_csi(struct lcd_struct *p, unsigned char input)
> -+{
> -+ if (p->index >= NPAR) {
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ printk(KERN_NOTICE "LCD: too many parameters in CSI escape sequence\n");
> -+ } else if (input == '?') {
> -+ set_bit(QUES, &p->struct_flags);
> -+ } else if (input == ';') {
> -+ ++p->index;
> -+ } else if (input >= '0' && input <= '9') {
> -+ p->csi_args[p->index] = (p->csi_args[p->index]*10)+(input-'0');
> -+ } else {
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ if (! test_bit(INC_CURS_POS, &p->struct_flags))
> -+ return;
> -+ switch (input) {
> -+ case 'h': /* DECSET sequences and mode switches */
> -+ csi_h(p, p->csi_args[0]);
> -+ clear_bit(QUES, &p->struct_flags);
> -+ return;
> -+
> -+ case 'l': /* DECRST sequences and mode switches */
> -+ csi_l(p, p->csi_args[0]);
> -+ clear_bit(QUES, &p->struct_flags);
> -+ return;
> -+ }
> -+ clear_bit(QUES, &p->struct_flags);
> -+ switch (input) {
> -+ case '@': /* Insert # Blank character */
> -+ csi_at(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'G': case '`': /* Cursor to indicated column in current row */
> -+ if (p->csi_args[0])
> -+ --p->csi_args[0];
> -+ gotoxy(p, p->csi_args[0], p->row);
> -+ return;
> -+
> -+ case 'A': /* Cursor # rows Up */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ gotoxy(p, p->col, p->row-p->csi_args[0]);
> -+ return;
> -+
> -+ case 'B': case 'e': /* Cursor # rows Down */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ gotoxy(p, p->col, p->row+p->csi_args[0]);
> -+ return;
> -+
> -+ case 'C': case 'a': /* Cursor # columns Right */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ gotoxy(p, p->col+p->csi_args[0], p->row);
> -+ return;
> -+
> -+ case 'D': /* Cursor # columns Left */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ gotoxy(p, p->col-p->csi_args[0], p->row);
> -+ return;
> -+
> -+ case 'E': /* Cursor # rows Down, column 1 */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ gotoxy(p, 0, p->row+p->csi_args[0]);
> -+ return;
> -+
> -+ case 'F': /* Cursor # rows Up, column 1 */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ gotoxy(p, 0, p->row-p->csi_args[0]);
> -+ return;
> -+
> -+ case 'd': /* Cursor to indicated row in current column */
> -+ if (p->csi_args[0])
> -+ --p->csi_args[0];
> -+ gotoxay(p, p->col, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'H': case 'f': /* Cursor to indicated row, column (origin 1, 1) */
> -+ if (p->csi_args[0])
> -+ --p->csi_args[0];
> -+ if (p->csi_args[1])
> -+ --p->csi_args[1];
> -+ gotoxay(p, p->csi_args[1], p->csi_args[0]);
> -+ return;
> -+
> -+ case 'J': /* Erase display */
> -+ csi_J(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'K': /* Erase line */
> -+ csi_K(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'L': /* Insert # blank lines */
> -+ csi_L(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'M': /* Delete # blank lines */
> -+ csi_M(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'P': /* Delete # characters on the current line */
> -+ csi_P(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'X': /* Erase # characters on the current line */
> -+ csi_X(p, p->csi_args[0]);
> -+ return;
> -+
> -+ case 'm': /* Set video attributes */
> -+ csi_m(p, p->index);
> -+ return;
> -+
> -+ case 's': /* Save cursor position */
> -+ case 'u': /* Restore cursor position */
> -+ csi_su(p, input);
> -+ return;
> -+
> -+ case ']': /* Linux private ESC [ ] sequence */
> -+ csi_linux(p);
> -+ return;
> -+
> -+ case 'r': /* Set the scrolling region */
> -+ if (! p->csi_args[0])
> -+ ++p->csi_args[0];
> -+ if (! p->csi_args[1] || p->csi_args[1] > p->par->vs_rows)
> -+ p->csi_args[1] = p->par->vs_rows;
> -+ csi_r(p, p->csi_args[0], p->csi_args[1]);
> -+ return;
> -+
> -+ /* Ignored escape sequences */
> -+ case 'c':
> -+ case 'g':
> -+ case 'n':
> -+ case 'q':
> -+ return;
> -+
> -+ default:
> -+ printk(KERN_NOTICE "LCD: unrecognized CSI escape sequence: ESC [ %u\n", input);
> -+ return;
> -+ }
> -+ }
> -+}
> -+
> -+/*
> -+ * Custom ESC- sequence handler.
> -+ */
> -+static int handle_custom_esc(struct lcd_struct *p, unsigned int _input)
> -+{
> -+ unsigned char input = _input & 0xff;
> -+ struct lcd_parameters *par = p->par;
> -+
> -+ if (_input & (~0xff)) {
> -+ switch (ESC_STATE(p)) {
> -+ case 's':
> -+ if (p->index++) {
> -+ unsigned char *cgbuf = p->cgram_buffer-par->cgram_bytes;
> -+
> -+ cgbuf[p->index-2] = input;
> -+ if (p->index == par->cgram_bytes+1)
> -+ write_cgram(p, p->cgram_index, cgbuf);
> -+ } else {
> -+ if (! p->driver->write_cgram_char) {
> -+ printk(KERN_ERR "LCD: %s: missing function to write to CGRAM\n", p->par->name);
> -+ return (-1);
> -+ }
> -+ if (input >= par->cgram_char0 && input < par->cgram_char0+par->cgram_chars)
> -+ p->cgram_index = input;
> -+ else {
> -+ printk(KERN_NOTICE "LCD: bad CGRAM index\n");
> -+ return (-1);
> -+ }
> -+ }
> -+ return (0);
> -+
> -+ case 'G':
> -+ if (input >= par->cgram_char0 && input < par->cgram_char0+par->cgram_chars)
> -+ write_data(p, (p->attr << 8) | p->driver->charmap[input]);
> -+ else {
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ handle_input(p, (p->attr << 8) | input);
> -+ }
> -+ return (0);
> -+
> -+ case 'r':
> -+ if (input == '1')
> -+ address_mode(p, -1);
> -+ else if (input == '0')
> -+ address_mode(p, 1);
> -+ return (0);
> -+
> -+ case 'A':
> -+ scrup(p, p->top, p->bot, input);
> -+ return (0);
> -+
> -+ case 'B':
> -+ scrdown(p, p->top, p->bot, input);
> -+ return (0);
> -+
> -+ case 'C':
> -+ browse_screen(p, input);
> -+ return (0);
> -+ }
> -+ }
> -+
> -+ /* These are the custom ESC- sequences */
> -+ switch (input) {
> -+ case 's': /* CGRAM select */
> -+ if (p->cgram_buffer) {
> -+ SET_ESC_STATE(p, input);
> -+ p->index = 0;
> -+ return (par->cgram_bytes+1);
> -+ } else {
> -+ printk(KERN_NOTICE "LCD: driver %s does not support CGRAM chars\n", par->name);
> -+ return (0);
> -+ }
> -+
> -+ case 'A': /* Scroll up */
> -+ case 'B': /* Scroll down */
> -+ case 'C': /* Browse screen */
> -+ case 'G': /* Enter cgram mode */
> -+ case 'r': /* Decrement counter after data read/write */
> -+ SET_ESC_STATE(p, input);
> -+ return (1);
> -+ }
> -+
> -+ return (-1);
> -+}
> -+
> -+/*
> -+ * ESC- but not CSI sequence handler.
> -+ */
> -+static int handle_esc(struct lcd_struct *p, unsigned char input)
> -+{
> -+ int ret;
> -+
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ switch (input) {
> -+ case 'c': /* Reset */
> -+ set_bit(DECAWM, &p->struct_flags);
> -+ set_bit(INC_CURS_POS, &p->struct_flags);
> -+ ff(p);
> -+ return (0);
> -+
> -+ case 'D': /* Line Feed */
> -+ lf(p);
> -+ return (0);
> -+
> -+ case 'E': /* New Line */
> -+ cr(p);
> -+ lf(p);
> -+ return (0);
> -+
> -+ case 'M': /* Reverse Line Feed */
> -+ ri(p);
> -+ return (0);
> -+
> -+ case '7':
> -+ case '8':
> -+ csi_su(p, (input == '7' ? 's' : 'u'));
> -+ return (0);
> -+
> -+ /* CSI: Start of CSI escape sequence */
> -+ case '[':
> -+ memset(p->csi_args, 0, sizeof(p->csi_args));
> -+ p->index = 0;
> -+ SET_INPUT_STATE(p, CSI);
> -+ return (0);
> -+
> -+ /* Ignored escape sequences */
> -+ case '(':
> -+ SET_INPUT_STATE(p, ESC_G0);
> -+ return (1);
> -+
> -+ case ')':
> -+ SET_INPUT_STATE(p, ESC_G1);
> -+ return (1);
> -+
> -+ case '#':
> -+ SET_INPUT_STATE(p, ESC_HASH);
> -+ return (1);
> -+
> -+ case '%':
> -+ SET_INPUT_STATE(p, ESC_PERCENT);
> -+ return (1);
> -+
> -+ case 'H':
> -+ case 'Z':
> -+ case '>':
> -+ case '=':
> -+ case ']':
> -+ return (0);
> -+ }
> -+
> -+ /* These are the custom ESC- sequences */
> -+ if ((ret = handle_custom_esc(p, input)) > 0) {
> -+ SET_INPUT_STATE(p, ARG);
> -+ return (ret);
> -+ }
> -+
> -+ if (ret < 0 && p->driver->handle_custom_char)
> -+ if ((ret = p->driver->handle_custom_char(input)) > 0) {
> -+ SET_INPUT_STATE(p, ARG_DRIVER);
> -+ return (ret);
> -+ }
> -+
> -+ if (ret < 0)
> -+ printk(KERN_NOTICE "LCD: unrecognized escape sequence: ESC %u\n", input);
> -+
> -+ return (0);
> -+}
> -+
> -+/*
> -+ * Main input handler.
> -+ */
> -+static void handle_input(struct lcd_struct *p, unsigned short _input)
> -+{
> -+ unsigned char input = _input & 0xff;
> -+ struct lcd_driver *driver = p->driver;
> -+
> -+ switch (INPUT_STATE(p)) {
> -+ case NORMAL:
> -+ if (input < 0x20 || input == 0x9b)
> -+ control_char(p, input);
> -+ else
> -+ write_data(p, (_input & 0xff00) | driver->charmap[input]);
> -+ return;
> -+
> -+ case RAW:
> -+ write_data(p, (_input & 0xff00) | driver->charmap[input]);
> -+ return;
> -+
> -+ case SYN:
> -+ write_data(p, _input);
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ return;
> -+
> -+ case ESC:
> -+ p->esc_args = handle_esc(p, input);
> -+ return;
> -+
> -+ case ESC_G0:
> -+ case ESC_G1:
> -+ case ESC_HASH:
> -+ case ESC_PERCENT:
> -+ if (! --p->esc_args)
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ return;
> -+
> -+ case CSI:
> -+ handle_csi(p, input);
> -+ return;
> -+
> -+ case ARG:
> -+ if (handle_custom_esc(p, 0x100 | input) || ! --p->esc_args)
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ return;
> -+
> -+ case ARG_DRIVER:
> -+ if (driver->handle_custom_char(0x100 | input) || ! --p->esc_args)
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ return;
> -+ }
> -+}
> -+
> -+
> -+
> -+
> -+
> -+/***************************************
> -+ * Read from/Write to display routines *
> -+ ***************************************/
> -+
> -+/*
> -+ * Write character data to the display.
> -+ */
> -+static void write_data(struct lcd_struct *p, unsigned short data)
> -+{
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int pos;
> -+ int frame_pos;
> -+
> -+ if (test_bit(NEED_WRAP, &p->struct_flags)) {
> -+ cr(p);
> -+ lf(p);
> -+ }
> -+
> -+ if (test_bit(DECIM, &p->struct_flags))
> -+ lcd_insert_char(p, 1);
> -+
> -+ pos = (p->row*vs_cols)+p->col;
> -+ if ((frame_pos = vs_to_frame_(p, pos)) < 0) {
> -+ show_cursor(p);
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+ frame_pos = vs_to_frame_(p, pos);
> -+ }
> -+
> -+ if (p->display[frame_pos] != data) {
> -+ p->driver->write_char(frame_pos, data);
> -+ p->display[frame_pos] = data;
> -+ }
> -+
> -+ p->fb[pos] = data;
> -+
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ if (p->col+1 < vs_cols)
> -+ iterator_inc(p->col, vs_cols);
> -+ else if (test_bit(DECAWM, &p->struct_flags))
> -+ set_bit(NEED_WRAP, &p->struct_flags);
> -+ } else {
> -+ if (p->col)
> -+ iterator_dec(p->col, vs_cols);
> -+ else if (test_bit(DECAWM, &p->struct_flags))
> -+ set_bit(NEED_WRAP, &p->struct_flags);
> -+ }
> -+}
> -+
> -+/*
> -+ * Write an entire CGRAM character to the display.
> -+ */
> -+static void write_cgram(struct lcd_struct *p, unsigned char index, unsigned char *pixels)
> -+{
> -+ struct lcd_parameters *par = p->par;
> -+ unsigned int inc_set = test_bit(INC_CURS_POS, &p->struct_flags);
> -+ unsigned char *cgbuf = p->cgram_buffer+(index-par->cgram_char0)*par->cgram_bytes;
> -+
> -+ if (! strncmp(cgbuf, pixels, par->cgram_bytes))
> -+ return;
> -+
> -+ if (! inc_set)
> -+ address_mode(p, 1);
> -+
> -+ p->driver->write_cgram_char(index, pixels);
> -+ memcpy(cgbuf, pixels, par->cgram_bytes);
> -+
> -+ if (! inc_set)
> -+ address_mode(p, -1);
> -+}
> -+
> -+/*
> -+ * Read character data from the display.
> -+ */
> -+static void read_data(struct lcd_struct *p, unsigned short *data)
> -+{
> -+ unsigned int vs_rows = p->par->vs_rows;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+ unsigned int pos = (p->row*vs_cols)+p->col;
> -+ int frame_pos;
> -+
> -+ if ((frame_pos = vs_to_frame_(p, pos)) < 0) {
> -+ show_cursor(p);
> -+ redraw_screen(p, 0, p->fb_size-1);
> -+ frame_pos = vs_to_frame_(p, pos);
> -+ }
> -+
> -+ if (p->driver->read_char)
> -+ p->driver->read_char(frame_pos, data);
> -+ else
> -+ *data = p->fb[pos];
> -+
> -+ if (test_bit(INC_CURS_POS, &p->struct_flags)) {
> -+ iterator_inc(p->col, vs_cols);
> -+ if (! p->col) {
> -+ if (p->row+1 < vs_rows)
> -+ ++p->row;
> -+ }
> -+ } else {
> -+ iterator_dec(p->col, vs_cols);
> -+ if (p->col+1 == vs_cols) {
> -+ if (p->row)
> -+ --p->row;
> -+ }
> -+ }
> -+}
> -+
> -+/*
> -+ * Read an entire CGRAM character from the display.
> -+ */
> -+static void read_cgram(struct lcd_struct *p, unsigned char index, unsigned char *pixels)
> -+{
> -+ struct lcd_parameters *par = p->par;
> -+ unsigned int inc_set = test_bit(INC_CURS_POS, &p->struct_flags);
> -+ unsigned char *cgbuf = p->cgram_buffer+(index-par->cgram_char0)*par->cgram_bytes;
> -+
> -+ if (! p->driver->read_cgram_char) {
> -+ memcpy(pixels, cgbuf, par->cgram_bytes);
> -+ return;
> -+ }
> -+
> -+ if (! inc_set)
> -+ address_mode(p, 1);
> -+
> -+ p->driver->read_cgram_char(index, pixels);
> -+
> -+ if (! inc_set)
> -+ address_mode(p, -1);
> -+}
> -+
> -+
> -+
> -+
> -+
> -+/****************************
> -+ * Proc filesystem routines *
> -+ ****************************/
> -+#ifdef USE_PROC
> -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 4, 0)
> -+/* create_proc_read_entry is missing in 2.2.x kernels */
> -+static struct proc_dir_entry *create_proc_read_entry(const char *name, mode_t mode,
> -+ struct proc_dir_entry *parent, read_proc_t *read_proc, void *data)
> -+{
> -+ struct proc_dir_entry *res = create_proc_entry(name, mode, parent);
> -+
> -+ if (res) {
> -+ res->read_proc = read_proc;
> -+ res->data = data;
> -+ }
> -+
> -+ return (res);
> -+}
> -+#endif
> -+
> -+static int proc_fb_read(char *buffer, char **start, off_t offset, int size, int *eof, void *data)
> -+{
> -+ char *temp = buffer;
> -+ struct lcd_struct *p = (struct lcd_struct *)data;
> -+ unsigned int vs_cols;
> -+ static unsigned int nr, need_wrap;
> -+ static off_t _offset;
> -+
> -+ down(&p->lcd_sem);
> -+ if (! offset)
> -+ _offset = 0;
> -+ if ((*eof = (_offset >= p->fb_size))) {
> -+ up(&p->lcd_sem);
> -+ return (0);
> -+ }
> -+ vs_cols = p->par->vs_cols;
> -+ if (size && need_wrap) {
> -+ need_wrap = 0;
> -+ temp += sprintf(temp, "\n");
> -+ --size;
> -+ }
> -+ if (! nr)
> -+ nr = vs_cols;
> -+ *start = (char *)0;
> -+ while (size && nr) {
> -+ unsigned char c = (p->fb[_offset] & 0xff);
> -+
> -+ temp += sprintf(temp, "%c", (c < 0x20 ? '?' : c));
> -+ --size;
> -+ --nr;
> -+ ++*start;
> -+ ++_offset;
> -+ }
> -+ if (! nr) {
> -+ if (size) {
> -+ temp += sprintf(temp, "\n");
> -+ --size;
> -+ } else
> -+ need_wrap = 1;
> -+ }
> -+ up(&p->lcd_sem);
> -+
> -+ return (temp-buffer);
> -+}
> -+
> -+static int proc_display_read(char *buffer, char **start, off_t offset, int size, int *eof, void *data)
> -+{
> -+ char *temp = buffer;
> -+ struct lcd_struct *p = (struct lcd_struct *)data;
> -+ unsigned int i, frame_cols;
> -+ int frame_pos;
> -+
> -+ down(&p->lcd_sem);
> -+ frame_cols = p->par->cntr_cols;
> -+ frame_pos = vs_to_frame_(p, (p->row*p->par->vs_cols)+p->col);
> -+ temp += sprintf(temp, " ");
> -+ for (i = 2; i <= frame_cols; i += 2)
> -+ temp += sprintf(temp, " %d", i%10);
> -+ temp += sprintf(temp, "\n");
> -+
> -+ temp += sprintf(temp, " +");
> -+ for (i = 0; i < frame_cols; ++i)
> -+ temp += sprintf(temp, "-");
> -+ temp += sprintf(temp, "+\n");
> -+
> -+ for (i = 0; i < p->frame_size; ++i) {
> -+ unsigned char c = (p->display[i] & 0xff);
> -+
> -+ if (! (i%frame_cols))
> -+ temp += sprintf(temp, "%2d |", 1+i/frame_cols);
> -+ if (frame_pos--)
> -+ temp += sprintf(temp, "%c", (c < 0x20 ? '?' : c));
> -+ else
> -+ temp += sprintf(temp, "_");
> -+ if (! ((i+1)%frame_cols))
> -+ temp += sprintf(temp, "|\n");
> -+ }
> -+
> -+ temp += sprintf(temp, " +");
> -+ for (i = 0; i < frame_cols; ++i)
> -+ temp += sprintf(temp, "-");
> -+ temp += sprintf(temp, "+\n");
> -+ up(&p->lcd_sem);
> -+
> -+ return (temp-buffer);
> -+}
> -+
> -+static int proc_charmap_read(char *buffer, char **start, off_t offset, int size, int *eof, void *data)
> -+{
> -+ char *temp = buffer;
> -+ struct lcd_struct *p = (struct lcd_struct *)data;
> -+ unsigned char *charmap;
> -+ unsigned int i;
> -+
> -+ down(&p->lcd_sem);
> -+ charmap = p->driver->charmap;
> -+ temp += sprintf(temp, "static unsigned char charmap[] = {");
> -+ for (i = 0; i < 255; ++i) {
> -+ if (! (i & 7)) {
> -+ temp += sprintf(temp, "\n");
> -+ if (! (i & 31))
> -+ temp += sprintf(temp, "\n/* %d - %d */\n", i, i+31);
> -+ }
> -+ temp += sprintf(temp, "0x%.2x, ", *charmap++);
> -+ }
> -+ temp += sprintf(temp, "0x%.2x\n\n};\n", *charmap);
> -+ up(&p->lcd_sem);
> -+
> -+ return (temp-buffer);
> -+}
> -+
> -+static int proc_registered_drivers(char *buffer, char **start, off_t offset, int size, int *eof, void *data)
> -+{
> -+ char *temp = buffer;
> -+ struct list_head *entry;
> -+
> -+ down(&drivers_sem);
> -+ temp += sprintf(temp, "Registered drivers:\n");
> -+ list_for_each(entry, &lcd_drivers) {
> -+ struct lcd_struct *p = list_entry(entry, struct lcd_struct, lcd_list);
> -+
> -+ down(&p->lcd_sem);
> -+ temp += sprintf(temp, "%3d %s\n", p->par->minor, p->par->name);
> -+ up(&p->lcd_sem);
> -+ }
> -+ up(&drivers_sem);
> -+
> -+ return (temp-buffer);
> -+}
> -+
> -+static void create_driver_proc_entries(struct lcd_struct *p)
> -+{
> -+ struct proc_dir_entry *driver_proc_root = p->driver->driver_proc_root;
> -+
> -+ SET_PROC_LEVEL(p, 0);
> -+ if (create_proc_read_entry("framebuffer", 0, driver_proc_root, proc_fb_read, p) == NULL) {
> -+ printk(KERN_ERR "LCD: cannot create /proc/lcd/%s/framebuffer\n", p->par->name);
> -+ return;
> -+ }
> -+ SET_PROC_LEVEL(p, 1);
> -+ if (create_proc_read_entry("display", 0, driver_proc_root, proc_display_read, p) == NULL) {
> -+ printk(KERN_ERR "LCD: cannot create /proc/lcd/%s/display\n", p->par->name);
> -+ return;
> -+ }
> -+ SET_PROC_LEVEL(p, 2);
> -+ if (create_proc_read_entry("charmap.h", 0, driver_proc_root, proc_charmap_read, p) == NULL) {
> -+ printk(KERN_ERR "LCD: cannot create /proc/lcd/%s/charmap.h\n", p->par->name);
> -+ return;
> -+ }
> -+ SET_PROC_LEVEL(p, 3);
> -+}
> -+
> -+static void remove_driver_proc_entries(struct lcd_struct *p)
> -+{
> -+ struct proc_dir_entry *driver_proc_root = p->driver->driver_proc_root;
> -+
> -+ switch (PROC_LEVEL(p)) {
> -+ case 3:
> -+ remove_proc_entry("charmap.h", driver_proc_root);
> -+ case 2:
> -+ remove_proc_entry("display", driver_proc_root);
> -+ case 1:
> -+ remove_proc_entry("framebuffer", driver_proc_root);
> -+ }
> -+ SET_PROC_LEVEL(p, 0);
> -+}
> -+#endif
> -+
> -+
> -+
> -+
> -+
> -+/*****************************
> -+ * Low level file operations *
> -+ *****************************/
> -+static ssize_t do_lcd_read(struct lcd_struct *p, void *buffer, size_t length)
> -+{
> -+ unsigned int i;
> -+ unsigned short tmp;
> -+
> -+ if (! p->refcount)
> -+ return (-ENXIO);
> -+
> -+ if (test_bit(WITH_ATTR, &p->struct_flags))
> -+ for (i = 0; i < length; ++i) {
> -+ read_data(p, &tmp);
> -+ ((unsigned short *)buffer)[i] = tmp;
> -+ }
> -+ else
> -+ for (i = 0; i < length; ++i) {
> -+ read_data(p, &tmp);
> -+ ((unsigned char *)buffer)[i] = tmp & 0xff;
> -+ }
> -+
> -+ return (length);
> -+}
> -+
> -+static ssize_t do_lcd_write(struct lcd_struct *p, const void *buffer, size_t length)
> -+{
> -+ unsigned int i;
> -+
> -+ if (! p->refcount)
> -+ return (-ENXIO);
> -+
> -+ if (test_bit(WITH_ATTR, &p->struct_flags))
> -+ for (i = 0; i < length; ++i)
> -+ handle_input(p, ((const unsigned short *)buffer)[i]);
> -+ else
> -+ for (i = 0; i < length; ++i)
> -+ handle_input(p, (p->attr << 8) | ((const unsigned char *)buffer)[i]);
> -+
> -+ return (length);
> -+}
> -+
> -+static int do_lcd_open(struct lcd_struct *p)
> -+{
> -+ if (! p->refcount) {
> -+ if (p->driver->driver_module) {
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+ if (! try_module_get(p->driver->driver_module))
> -+ return (-EBUSY);
> -+#else
> -+ if (__MOD_IN_USE(p->driver->driver_module))
> -+ return (-EBUSY);
> -+
> -+ __MOD_INC_USE_COUNT(p->driver->driver_module);
> -+#endif
> -+ }
> -+ }
> -+
> -+ ++p->refcount;
> -+
> -+ return (0);
> -+}
> -+
> -+static int do_lcd_release(struct lcd_struct *p)
> -+{
> -+ if (! p->refcount)
> -+ return (0);
> -+
> -+ if (p->refcount == 1) {
> -+ if (p->driver->driver_module)
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+ module_put(p->driver->driver_module);
> -+#else
> -+ __MOD_DEC_USE_COUNT(p->driver->driver_module);
> -+#endif
> -+ }
> -+
> -+ --p->refcount;
> -+
> -+ return (0);
> -+}
> -+
> -+static int cgram_ioctl(struct lcd_struct *p, unsigned int cmd, unsigned char *argp)
> -+{
> -+ struct lcd_parameters *par = p->par;
> -+ unsigned int length = par->cgram_bytes;
> -+ unsigned char index = argp[0];
> -+ unsigned char *buffer = argp+1;
> -+ unsigned char *cgbuf = p->cgram_buffer-length;
> -+
> -+ if (index < par->cgram_char0 || index >= par->cgram_char0+par->cgram_chars)
> -+ return (-EINVAL);
> -+
> -+ if (! p->driver->write_cgram_char) {
> -+ printk(KERN_ERR "LCD: %s: missing function to write to CGRAM\n", p->par->name);
> -+ return (-ENOSYS);
> -+ }
> -+
> -+ if (cmd == LCDL_SET_CGRAM_CHAR) {
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_from_user(cgbuf, buffer, length))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(cgbuf, buffer, length);
> -+ write_cgram(p, index, cgbuf);
> -+ } else {
> -+ read_cgram(p, index, cgbuf);
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_to_user(buffer, cgbuf, length))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(buffer, cgbuf, length);
> -+ }
> -+
> -+ return (0);
> -+}
> -+
> -+static int do_lcd_ioctl(struct lcd_struct *p, unsigned int cmd, unsigned long arg)
> -+{
> -+ int i;
> -+ struct lcd_driver *driver = p->driver;
> -+ struct lcd_parameters *par = p->par;
> -+ unsigned char *argp = (unsigned char *)arg;
> -+
> -+ if (! p->refcount)
> -+ return (-ENXIO);
> -+
> -+ switch (cmd) {
> -+ case LCDL_SET_PARAM:
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if ((i = cleanup_driver(p)))
> -+ return (i);
> -+ i = par->minor;
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_from_user(par, argp, sizeof(struct lcd_parameters)))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(par, argp, sizeof(struct lcd_parameters));
> -+ par->minor = i;
> -+ return (init_driver(p));
> -+
> -+ case LCDL_GET_PARAM:
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_to_user(argp, par, sizeof(struct lcd_parameters)))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(argp, par, sizeof(struct lcd_parameters));
> -+ return (0);
> -+
> -+ case LCDL_RESET_CHARMAP:
> -+ for (i = 0; i < 256; ++i)
> -+ driver->charmap[i] = i;
> -+ return (0);
> -+
> -+ case LCDL_CHARSUBST:
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ get_user(i, argp);
> -+ get_user(driver->charmap[i], argp+1);
> -+ } else {
> -+ i = argp[0];
> -+ driver->charmap[i] = argp[1];
> -+ }
> -+ return (0);
> -+
> -+ case LCDL_SAVE_CHARMAP:
> -+ memcpy(p->s_charmap, driver->charmap, 256);
> -+ return (0);
> -+
> -+ case LCDL_RESTORE_CHARMAP:
> -+ memcpy(driver->charmap, p->s_charmap, 256);
> -+ return (0);
> -+
> -+ case LCDL_SWAP_CHARMAP:
> -+ {
> -+ unsigned char *tmp;
> -+
> -+ tmp = driver->charmap;
> -+ driver->charmap = p->s_charmap;
> -+ p->s_charmap = tmp;
> -+ }
> -+ return (0);
> -+
> -+ case LCDL_RAW_MODE:
> -+ if (arg) {
> -+ clear_bit(NEED_WRAP, &p->struct_flags);
> -+ clear_bit(DECIM, &p->struct_flags);
> -+ clear_bit(DECAWM, &p->struct_flags);
> -+ SET_INPUT_STATE(p, RAW);
> -+ } else {
> -+ set_bit(DECAWM, &p->struct_flags);
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ }
> -+ return (0);
> -+
> -+ case LCDL_IOATTR:
> -+ if (arg)
> -+ set_bit(WITH_ATTR, &p->struct_flags);
> -+ else
> -+ clear_bit(WITH_ATTR, &p->struct_flags);
> -+ return (0);
> -+
> -+ case LCDL_CLEAR_DISP:
> -+ ff(p);
> -+ return (0);
> -+
> -+ case LCDL_SET_CGRAM_CHAR:
> -+ case LCDL_GET_CGRAM_CHAR:
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if (p->cgram_buffer)
> -+ return (cgram_ioctl(p, cmd, argp));
> -+ else
> -+ printk(KERN_NOTICE "LCD: driver %s does not support CGRAM chars\n", par->name);
> -+ return (0);
> -+
> -+ case LCDL_SET_CHARMAP:
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_from_user(driver->charmap, argp, 256))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(driver->charmap, argp, 256);
> -+ return (0);
> -+
> -+ case LCDL_GET_CHARMAP:
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_to_user(argp, driver->charmap, 256))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(argp, driver->charmap, 256);
> -+ return (0);
> -+
> -+ case LCDL_MEMSET:
> -+ case LCDL_MEMMOVE:
> -+ {
> -+ int buf[3];
> -+
> -+ if (argp == NULL)
> -+ return (-EFAULT);
> -+ if (test_bit(USER_SPACE, &p->struct_flags)) {
> -+ if (copy_from_user(buf, argp, sizeof(buf)))
> -+ return (-EFAULT);
> -+ } else
> -+ memcpy(buf, argp, sizeof(buf));
> -+
> -+ if (cmd == LCDL_MEMSET)
> -+ lcd_memset(p, buf[0], buf[1], buf[2]);
> -+ else
> -+ lcd_memmove(p, buf[0], buf[1], buf[2]);
> -+
> -+ return (0);
> -+ }
> -+
> -+ default:
> -+ if (driver->handle_custom_ioctl)
> -+ return (driver->handle_custom_ioctl(cmd, arg, test_bit(USER_SPACE, &p->struct_flags)));
> -+ }
> -+
> -+ return (-ENOIOCTLCMD);
> -+}
> -+
> -+
> -+
> -+
> -+
> -+/**************************************************
> -+ * Kernel register/unregister lcd driver routines *
> -+ **************************************************/
> -+/*
> -+ * Find a driver in lcd_drivers linked list
> -+ */
> -+static struct lcd_struct *find_lcd_struct(unsigned short minor)
> -+{
> -+ struct list_head *entry;
> -+
> -+ list_for_each(entry, &lcd_drivers) {
> -+ struct lcd_struct *p = list_entry(entry, struct lcd_struct, lcd_list);
> -+
> -+ if (p->par->minor == minor)
> -+ return (p);
> -+ }
> -+
> -+ return (NULL);
> -+}
> -+
> -+static void list_add_sorted(struct list_head *new)
> -+{
> -+ struct list_head *entry;
> -+ unsigned short new_minor = (list_entry(new, struct lcd_struct, lcd_list))->par->minor;
> -+
> -+ list_for_each(entry, &lcd_drivers) {
> -+ struct lcd_struct *p = list_entry(entry, struct lcd_struct, lcd_list);
> -+
> -+ if (p->par->minor > new_minor)
> -+ break;
> -+ }
> -+ list_add_tail(new, entry);
> -+}
> -+
> -+/* Exported function */
> -+int lcd_register_driver(struct lcd_driver *driver, struct lcd_parameters *par)
> -+{
> -+ int ret;
> -+ struct lcd_struct *p;
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
> -+ struct device *lcd_device;
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+ struct class_device *lcd_device;
> -+#endif
> -+
> -+ if (! driver || ! par || par->minor >= minors)
> -+ return (-EINVAL);
> -+ if (! driver->write_char || ! driver->init_port || ! driver->cleanup_port) {
> -+ printk(KERN_ERR "LCD: missing functions\n");
> -+ return (-EINVAL);
> -+ }
> -+
> -+ down(&drivers_sem);
> -+
> -+ if (find_lcd_struct(par->minor)) {
> -+ up(&drivers_sem);
> -+ return (-EBUSY);
> -+ }
> -+
> -+ if ((p = (struct lcd_struct *)kmalloc(sizeof(struct lcd_struct), GFP_KERNEL)) == NULL) {
> -+ printk(KERN_ERR "LCD: memory allocation failed (kmalloc)\n");
> -+ up(&drivers_sem);
> -+ return (-ENOMEM);
> -+ }
> -+ memset(p, 0, sizeof(struct lcd_struct));
> -+
> -+ p->driver = driver;
> -+ p->par = par;
> -+ p->refcount = 0;
> -+ SET_INIT_LEVEL(p, 0);
> -+ SET_INPUT_STATE(p, NORMAL);
> -+ set_bit(DECAWM, &p->struct_flags);
> -+ set_bit(INC_CURS_POS, &p->struct_flags);
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
> -+ lcd_device = device_create(lcd_linux_class, NULL, MKDEV(major, par->minor), NULL, "%s", par->name);
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
> -+ lcd_device = device_create(lcd_linux_class, NULL, MKDEV(major, par->minor), "%s", par->name);
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 15)
> -+ lcd_device = class_device_create(lcd_linux_class, NULL, MKDEV(major, par->minor), NULL, "%s", par->name);
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+ lcd_device = class_device_create(lcd_linux_class, MKDEV(major, par->minor), NULL, "%s", par->name);
> -+#endif
> -+ if (IS_ERR(lcd_device)) {
> -+ kfree(p);
> -+ up(&drivers_sem);
> -+ return (PTR_ERR(lcd_device));
> -+ }
> -+#endif
> -+
> -+#ifdef USE_PROC
> -+ if (lcd_proc_root && (driver->driver_proc_root = proc_mkdir(par->name, lcd_proc_root)) == NULL)
> -+ printk(KERN_ERR "LCD: cannot create /proc/lcd/%s/\n", par->name);
> -+#endif
> -+
> -+ if ((ret = init_driver(p))) {
> -+#ifdef USE_PROC
> -+ if (driver->driver_proc_root)
> -+ remove_proc_entry(p->par->name, lcd_proc_root);
> -+#endif
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
> -+ device_destroy(lcd_linux_class, MKDEV(major, par->minor));
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+ class_device_destroy(lcd_linux_class, MKDEV(major, par->minor));
> -+#endif
> -+
> -+ kfree(p);
> -+ up(&drivers_sem);
> -+ return (ret);
> -+ }
> -+
> -+ init_MUTEX(&p->lcd_sem);
> -+
> -+ list_add_sorted(&p->lcd_list);
> -+
> -+ up(&drivers_sem);
> -+
> -+#ifdef MODULE
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+ try_module_get(THIS_MODULE);
> -+#else
> -+ MOD_INC_USE_COUNT;
> -+#endif
> -+#endif
> -+
> -+ return (0);
> -+}
> -+EXPORT_SYMBOL(lcd_register_driver);
> -+
> -+/* Exported function */
> -+int lcd_unregister_driver(struct lcd_driver *driver, struct lcd_parameters *par)
> -+{
> -+ int ret;
> -+ struct lcd_struct *p;
> -+
> -+ if (! driver || ! par || par->minor >= minors)
> -+ return (-EINVAL);
> -+
> -+ down(&drivers_sem);
> -+
> -+ if ((p = find_lcd_struct(par->minor)) == NULL || p->driver != driver) {
> -+ printk(KERN_ERR "LCD: driver not found; lcd_unregister_driver failed\n");
> -+ up(&drivers_sem);
> -+ return (-ENODEV);
> -+ }
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ if (p->refcount) {
> -+ printk(KERN_ERR "LCD: driver busy; lcd_unregister_driver failed\n");
> -+ up(&p->lcd_sem);
> -+ up(&drivers_sem);
> -+ return (-EBUSY);
> -+ }
> -+
> -+ if ((ret = cleanup_driver(p))) {
> -+ up(&p->lcd_sem);
> -+ up(&drivers_sem);
> -+ return (ret);
> -+ }
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 19)
> -+ device_destroy(lcd_linux_class, MKDEV(major, par->minor));
> -+#elif LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+ class_device_destroy(lcd_linux_class, MKDEV(major, par->minor));
> -+#endif
> -+
> -+#ifdef USE_PROC
> -+ if (p->driver->driver_proc_root)
> -+ remove_proc_entry(p->par->name, lcd_proc_root);
> -+#endif
> -+
> -+ list_del(&p->lcd_list);
> -+ kfree(p);
> -+
> -+ up(&drivers_sem);
> -+
> -+#ifdef MODULE
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 0)
> -+ module_put(THIS_MODULE);
> -+#else
> -+ MOD_DEC_USE_COUNT;
> -+#endif
> -+#endif
> -+
> -+ return (0);
> -+}
> -+EXPORT_SYMBOL(lcd_unregister_driver);
> -+
> -+
> -+
> -+
> -+
> -+/************************
> -+ * Kernel I/O interface *
> -+ ************************/
> -+/* Exported function */
> -+int lcd_open(unsigned short minor, struct lcd_struct **pp)
> -+{
> -+ int ret;
> -+ struct lcd_struct *p;
> -+
> -+ down(&drivers_sem);
> -+
> -+ if (minor >= minors || (*pp = p = find_lcd_struct(minor)) == NULL) {
> -+ printk(KERN_ERR "LCD: lcd_open failed. Device not found.\n");
> -+ up(&drivers_sem);
> -+ return (-ENODEV);
> -+ }
> -+
> -+ down(&p->lcd_sem);
> -+ up(&drivers_sem);
> -+
> -+ ret = do_lcd_open(p);
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+EXPORT_SYMBOL(lcd_open);
> -+
> -+/* Exported function */
> -+int lcd_close(struct lcd_struct **pp)
> -+{
> -+ int ret;
> -+ struct lcd_struct *p;
> -+
> -+ if (! pp || ! (p = *pp)) {
> -+ printk(KERN_ERR "LCD: NULL pointer in lcd_close\n");
> -+ return (-ENODEV);
> -+ }
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ if (! (ret = do_lcd_release(p)))
> -+ *pp = NULL;
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+EXPORT_SYMBOL(lcd_close);
> -+
> -+static inline loff_t offset_to_row_col(struct lcd_struct *p, loff_t offset)
> -+{
> -+ unsigned long _offset = offset;
> -+ unsigned int vs_cols = p->par->vs_cols;
> -+
> -+ gotoxy(p, _offset%vs_cols, _offset/vs_cols);
> -+
> -+ return ((p->row*vs_cols)+p->col);
> -+}
> -+
> -+/* Exported function */
> -+ssize_t lcd_read(struct lcd_struct *p, void *bufp, size_t length, loff_t offset, unsigned int with_attr)
> -+{
> -+ ssize_t ret = 0;
> -+
> -+ if (! p) {
> -+ printk(KERN_ERR "LCD: NULL pointer in lcd_read\n");
> -+ return (-ENODEV);
> -+ }
> -+ if (! bufp)
> -+ return (-EFAULT);
> -+ if (offset < 0 || offset >= p->fb_size)
> -+ return (-EINVAL);
> -+
> -+ if (length+offset > p->fb_size)
> -+ length = p->fb_size-offset;
> -+
> -+ if (with_attr)
> -+ set_bit(WITH_ATTR, &p->struct_flags);
> -+
> -+ offset_to_row_col(p, offset);
> -+ ret = do_lcd_read(p, bufp, length);
> -+
> -+ if (with_attr)
> -+ clear_bit(WITH_ATTR, &p->struct_flags);
> -+
> -+ return (ret);
> -+}
> -+EXPORT_SYMBOL(lcd_read);
> -+
> -+/* Exported function */
> -+ssize_t lcd_write(struct lcd_struct *p, const void *bufp, size_t length, loff_t offset, unsigned int with_attr)
> -+{
> -+ ssize_t ret;
> -+
> -+ if (! p) {
> -+ printk(KERN_ERR "LCD: NULL pointer in lcd_write\n");
> -+ return (-ENODEV);
> -+ }
> -+ if (! bufp)
> -+ return (-EFAULT);
> -+ if (offset < 0 || offset >= p->fb_size)
> -+ return (-EINVAL);
> -+
> -+ if (with_attr)
> -+ set_bit(WITH_ATTR, &p->struct_flags);
> -+
> -+ offset_to_row_col(p, offset);
> -+ ret = do_lcd_write(p, bufp, length);
> -+
> -+ if (with_attr)
> -+ clear_bit(WITH_ATTR, &p->struct_flags);
> -+
> -+ return (ret);
> -+}
> -+EXPORT_SYMBOL(lcd_write);
> -+
> -+/* Exported function */
> -+int lcd_ioctl(struct lcd_struct *p, unsigned int cmd, ...)
> -+{
> -+ int ret;
> -+ unsigned long arg;
> -+ va_list ap;
> -+
> -+ if (! p) {
> -+ printk(KERN_ERR "LCD: NULL pointer in lcd_ioctl\n");
> -+ return (-ENODEV);
> -+ }
> -+
> -+ down(&p->lcd_sem);
> -+ va_start(ap, cmd);
> -+ arg = va_arg(ap, unsigned long);
> -+ ret = do_lcd_ioctl(p, cmd, arg);
> -+ va_end(ap);
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+EXPORT_SYMBOL(lcd_ioctl);
> -+
> -+
> -+
> -+
> -+
> -+/*******************
> -+ * File operations *
> -+ *******************/
> -+static loff_t lcd_fops_llseek(struct file *filp, loff_t offset, int orig)
> -+{
> -+ struct lcd_struct *p;
> -+
> -+ if (! (p = filp->private_data))
> -+ return (-ENODEV);
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ switch (orig) {
> -+ case 0:
> -+ break;
> -+
> -+ case 1:
> -+ offset += filp->f_pos;
> -+ break;
> -+
> -+ default:
> -+ up(&p->lcd_sem);
> -+ return (-EINVAL); /* SEEK_END not supported */
> -+ }
> -+
> -+ if (offset >= 0 && offset < p->fb_size)
> -+ filp->f_pos = offset_to_row_col(p, offset);
> -+ else
> -+ offset = -EINVAL;
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (offset);
> -+}
> -+
> -+static ssize_t lcd_fops_read(struct file *filp, char *buffer, size_t length, loff_t *offp)
> -+{
> -+ ssize_t ret = 0;
> -+ char *bufp = buffer;
> -+ struct lcd_struct *p;
> -+
> -+ if (! bufp)
> -+ return (-EFAULT);
> -+ if (! (p = filp->private_data))
> -+ return (-ENODEV);
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ if (*offp < 0 || *offp >= p->fb_size) {
> -+ up(&p->lcd_sem);
> -+ return (-EINVAL);
> -+ }
> -+
> -+ if (test_bit(WITH_ATTR, &p->struct_flags) && (length & 0x01))
> -+ length &= ~0x01;
> -+
> -+ if (length+(*offp) > p->fb_size)
> -+ length = p->fb_size-(*offp);
> -+
> -+ while (length) {
> -+ ret = (length > FLIP_BUF_SIZE ? FLIP_BUF_SIZE : length);
> -+ if (test_bit(WITH_ATTR, &p->struct_flags))
> -+ ret /= sizeof(unsigned short);
> -+ if ((ret = do_lcd_read(p, p->flip_buf, ret)) < 0)
> -+ break;
> -+ if (test_bit(WITH_ATTR, &p->struct_flags))
> -+ ret *= sizeof(unsigned short);
> -+ *offp = (p->row*p->par->vs_cols)+p->col;
> -+ if (copy_to_user(bufp, p->flip_buf, ret)) {
> -+ ret = -EFAULT;
> -+ break;
> -+ }
> -+ length -= ret;
> -+ bufp += ret;
> -+ ret = bufp-buffer;
> -+ if (length)
> -+ schedule();
> -+ }
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+
> -+static ssize_t lcd_fops_write(struct file *filp, const char *buffer, size_t length, loff_t *offp)
> -+{
> -+ ssize_t ret = 0;
> -+ const char *bufp = buffer;
> -+ struct lcd_struct *p;
> -+
> -+ if (! bufp)
> -+ return (-EFAULT);
> -+ if (! (p = filp->private_data))
> -+ return (-ENODEV);
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ if (*offp < 0 || *offp >= p->fb_size) {
> -+ up(&p->lcd_sem);
> -+ return (-EINVAL);
> -+ }
> -+
> -+ if (test_bit(WITH_ATTR, &p->struct_flags) && (length & 0x01))
> -+ length &= ~0x01;
> -+
> -+ while (length) {
> -+ ret = (length > FLIP_BUF_SIZE ? FLIP_BUF_SIZE : length);
> -+ if (copy_from_user(p->flip_buf, bufp, ret)) {
> -+ ret = -EFAULT;
> -+ break;
> -+ }
> -+ if (test_bit(WITH_ATTR, &p->struct_flags))
> -+ ret /= sizeof(unsigned short);
> -+ if ((ret = do_lcd_write(p, p->flip_buf, ret)) < 0)
> -+ break;
> -+ if (test_bit(WITH_ATTR, &p->struct_flags))
> -+ ret *= sizeof(unsigned short);
> -+ *offp = (p->row*p->par->vs_cols)+p->col;
> -+ length -= ret;
> -+ bufp += ret;
> -+ ret = bufp-buffer;
> -+ if (length)
> -+ schedule();
> -+ }
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+
> -+static int lcd_fops_open(struct inode *inop, struct file *filp)
> -+{
> -+ unsigned short minor;
> -+ int ret;
> -+ struct lcd_struct *p;
> -+
> -+ down(&drivers_sem);
> -+
> -+ if ((minor = MINOR(inop->i_rdev)) >= minors || (filp->private_data = p = find_lcd_struct(minor)) == NULL) {
> -+ up(&drivers_sem);
> -+ return (-ENODEV);
> -+ }
> -+
> -+ down(&p->lcd_sem);
> -+ up(&drivers_sem);
> -+
> -+ ret = do_lcd_open(p);
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+
> -+static int lcd_fops_release(struct inode *inop, struct file *filp)
> -+{
> -+ struct lcd_struct *p;
> -+ int ret;
> -+
> -+ if (! (p = filp->private_data))
> -+ return (-ENODEV);
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ if (! (ret = do_lcd_release(p)))
> -+ filp->private_data = NULL;
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+
> -+static long lcd_fops_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
> -+{
> -+ struct lcd_struct *p;
> -+ int ret;
> -+
> -+ if (! (p = filp->private_data))
> -+ return (-ENODEV);
> -+
> -+ down(&p->lcd_sem);
> -+
> -+ set_bit(USER_SPACE, &p->struct_flags);
> -+ ret = do_lcd_ioctl(p, cmd, arg);
> -+ clear_bit(USER_SPACE, &p->struct_flags);
> -+
> -+ up(&p->lcd_sem);
> -+
> -+ return (ret);
> -+}
> -+
> -+static struct file_operations lcd_linux_fops = {
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 4, 0)
> -+ .owner = THIS_MODULE,
> -+#endif
> -+ .llseek = lcd_fops_llseek,
> -+ .read = lcd_fops_read,
> -+ .write = lcd_fops_write,
> -+ .open = lcd_fops_open,
> -+ .release = lcd_fops_release,
> -+ .unlocked_ioctl = lcd_fops_ioctl,
> -+};
> -+
> -+
> -+
> -+
> -+
> -+/********************************
> -+ * Init/Cleanup driver routines *
> -+ ********************************/
> -+static int do_init_driver(struct lcd_struct *p)
> -+{
> -+ int ret;
> -+ struct lcd_driver *driver = p->driver;
> -+ struct lcd_parameters *par = p->par;
> -+ unsigned int frame_rows = par->cntr_rows*par->num_cntr;
> -+ unsigned int frame_cols = par->cntr_cols;
> -+
> -+ switch (INIT_LEVEL(p)) {
> -+ case 0:
> -+ if (frame_rows == 0 || frame_cols == 0 || ! par->name) {
> -+ printk(KERN_ERR "LCD: wrong lcd parameters\n");
> -+ return (-EINVAL);
> -+ }
> -+ if (driver->validate_driver) {
> -+ if ((ret = driver->validate_driver()) < 0) {
> -+ printk(KERN_ERR "LCD: validate_driver failed\n");
> -+ return (-EINVAL);
> -+ } else if (ret > 0) {
> -+ set_bit(CAN_DO_COLOR, &p->struct_flags);
> -+ p->defcolor = 0x07;
> -+ p->ulcolor = 0x0f;
> -+ p->halfcolor = 0x08;
> -+ }
> -+ }
> -+ default_attr(p);
> -+ update_attr(p);
> -+ p->frame_size = frame_rows*frame_cols;
> -+ if (par->vs_rows < frame_rows)
> -+ par->vs_rows = frame_rows;
> -+ if (par->vs_cols < frame_cols)
> -+ par->vs_cols = frame_cols;
> -+ p->fb_size = par->vs_rows*par->vs_cols;
> -+
> -+ ret = sizeof(short)*p->fb_size;
> -+ ret += sizeof(short)*p->frame_size;
> -+ ret += FLIP_BUF_SIZE;
> -+ ret += (p->driver->charmap ? 256 : 512);
> -+ if (par->cgram_chars*par->cgram_bytes)
> -+ ret += (1+par->cgram_chars)*par->cgram_bytes;
> -+ if ((p->fb = (unsigned short *)vmalloc(ret)) == NULL) {
> -+ printk(KERN_ERR "LCD: memory allocation failed (vmalloc)\n");
> -+ return (-ENOMEM);
> -+ }
> -+ __memset_short(p->fb, p->erase_char, p->fb_size+p->frame_size);
> -+
> -+ p->display = p->fb+p->fb_size;
> -+ p->flip_buf = (unsigned char *)(p->display+p->frame_size);
> -+
> -+ if (! p->driver->charmap) {
> -+ set_bit(NULL_CHARMAP, &p->struct_flags);
> -+ p->driver->charmap = p->flip_buf+FLIP_BUF_SIZE;
> -+ for (ret = 0; ret < 256; ++ret)
> -+ p->driver->charmap[ret] = ret;
> -+ p->s_charmap = p->driver->charmap+256;
> -+ } else
> -+ p->s_charmap = p->flip_buf+FLIP_BUF_SIZE;
> -+ memset(p->s_charmap, 0, 256);
> -+
> -+ if (par->cgram_chars*par->cgram_bytes) {
> -+ p->cgram_buffer = p->s_charmap+256+par->cgram_bytes;
> -+ memset(p->cgram_buffer, 0xff, par->cgram_chars*par->cgram_bytes);
> -+ } else
> -+ p->cgram_buffer = NULL;
> -+ p->driver->cgram_buffer = p->cgram_buffer;
> -+
> -+ p->frame_base = 0;
> -+ p->row = p->col = 0;
> -+ p->top = 0;
> -+ p->bot = par->vs_rows;
> -+ SET_INIT_LEVEL(p, 1);
> -+
> -+ case 1:
> -+ /* Initialize the communication port */
> -+ if ((ret = driver->init_port())) {
> -+ printk(KERN_ERR "LCD: failure while initializing the communication port\n");
> -+ return (ret);
> -+ }
> -+ SET_INIT_LEVEL(p, 2);
> -+
> -+ case 2:
> -+ /* Initialize LCD display */
> -+ if (driver->init_display && (ret = driver->init_display())) {
> -+ printk(KERN_ERR "LCD: failure while initializing the display\n");
> -+ return (ret);
> -+ }
> -+
> -+#ifdef USE_PROC
> -+ /* Create entries in /proc/lcd/"driver" */
> -+ if (driver->driver_proc_root)
> -+ create_driver_proc_entries(p);
> -+#endif
> -+ SET_INIT_LEVEL(p, 3);
> -+ }
> -+
> -+ return (0);
> -+}
> -+
> -+static int do_cleanup_driver(struct lcd_struct *p)
> -+{
> -+ int ret;
> -+ struct lcd_driver *driver = p->driver;
> -+
> -+ switch (INIT_LEVEL(p)) {
> -+ case 3:
> -+#ifdef USE_PROC
> -+ if (driver->driver_proc_root)
> -+ remove_driver_proc_entries(p);
> -+#endif
> -+ if (driver->cleanup_display && (ret = driver->cleanup_display())) {
> -+ printk(KERN_ERR "LCD: failure while cleaning the display\n");
> -+ return (ret);
> -+ }
> -+ SET_INIT_LEVEL(p, 2);
> -+
> -+ case 2:
> -+ if ((ret = driver->cleanup_port())) {
> -+ printk(KERN_ERR "LCD: failure while cleaning the communication port\n");
> -+ return (ret);
> -+ }
> -+ SET_INIT_LEVEL(p, 1);
> -+
> -+ case 1:
> -+ if (test_bit(NULL_CHARMAP, &p->struct_flags)) {
> -+ p->driver->charmap = NULL;
> -+ clear_bit(NULL_CHARMAP, &p->struct_flags);
> -+ }
> -+ vfree(p->fb);
> -+ p->fb = NULL;
> -+ SET_INIT_LEVEL(p, 0);
> -+ }
> -+
> -+ return (0);
> -+}
> -+
> -+static int init_driver(struct lcd_struct *p)
> -+{
> -+ int ret;
> -+
> -+ if ((ret = do_init_driver(p))) {
> -+ do_cleanup_driver(p);
> -+ printk(KERN_ERR "LCD: init_driver failed\n");
> -+ }
> -+
> -+ return (ret);
> -+}
> -+
> -+static int cleanup_driver(struct lcd_struct *p)
> -+{
> -+ int ret;
> -+
> -+ if ((ret = do_cleanup_driver(p))) {
> -+ do_init_driver(p);
> -+ printk(KERN_ERR "LCD: cleanup_driver failed\n");
> -+ }
> -+
> -+ return (ret);
> -+}
> -+
> -+
> -+
> -+
> -+
> -+/********************************
> -+ * Init/Cleanup module routines *
> -+ ********************************/
> -+static int __init lcd_linux_init_module(void)
> -+{
> -+ int ret;
> -+
> -+ if (! minors || minors > 256)
> -+ minors = LCD_MINORS;
> -+
> -+ init_MUTEX(&drivers_sem);
> -+
> -+ if ((ret = register_chrdev(major, LCD_LINUX_STRING, &lcd_linux_fops)) < 0) {
> -+ printk(KERN_ERR "LCD: register_chrdev failed\n");
> -+ return (ret);
> -+ }
> -+ if (major == 0)
> -+ major = ret;
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+ if (IS_ERR((lcd_linux_class = class_create(THIS_MODULE, "lcd")))) {
> -+ ret = PTR_ERR(lcd_linux_class);
> -+ unregister_chrdev(major, LCD_LINUX_STRING);
> -+ return (ret);
> -+ }
> -+#endif
> -+
> -+#ifdef USE_PROC
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
> -+ if ((lcd_proc_root = proc_mkdir("lcd", NULL)) == NULL)
> -+#else
> -+ if ((lcd_proc_root = proc_mkdir("lcd", &proc_root)) == NULL)
> -+#endif
> -+ printk(KERN_ERR "LCD: cannot create /proc/lcd/\n");
> -+ else if (create_proc_read_entry("drivers", 0, lcd_proc_root, proc_registered_drivers, NULL) == NULL)
> -+ printk(KERN_ERR "LCD: cannot create /proc/lcd/drivers\n");
> -+#endif
> -+
> -+ printk(KERN_INFO "LCD: --> LCD-Linux " LCD_LINUX_VERSION " <--\n");
> -+ printk(KERN_INFO "LCD: --> Mattia Jona-Lasinio <mjona at users.sourceforge.net> <--\n" );
> -+
> -+
> -+ return (0);
> -+}
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 4, 0)
> -+static void __exit lcd_linux_cleanup_module(void)
> -+#else
> -+/* __exit is not defined in 2.2.x kernels */
> -+static void lcd_linux_cleanup_module(void)
> -+#endif
> -+{
> -+#ifdef USE_PROC
> -+ if (lcd_proc_root) {
> -+ remove_proc_entry("drivers", lcd_proc_root);
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 26)
> -+ remove_proc_entry("lcd", NULL);
> -+#else
> -+ remove_proc_entry("lcd", &proc_root);
> -+#endif
> -+ }
> -+#endif
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 13)
> -+ class_destroy(lcd_linux_class);
> -+#endif
> -+
> -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 23)
> -+ unregister_chrdev(major, LCD_LINUX_STRING);
> -+#else
> -+ if (unregister_chrdev(major, LCD_LINUX_STRING))
> -+ printk(KERN_ERR "LCD: unregister_chrdev failed\n");
> -+#endif
> -+}
> -+
> -+module_init(lcd_linux_init_module)
> -+module_exit(lcd_linux_cleanup_module)
> -diff --git a/include/linux/hd44780.h b/include/linux/hd44780.h
> -new file mode 100644
> -index 0000000..9033d44
> ---- /dev/null
> -+++ b/include/linux/hd44780.h
> -@@ -0,0 +1,47 @@
> -+/* hd44780.h
> -+ *
> -+ * $Id: hd44780.h,v 1.15 2009/03/09 17:59:23 mjona Exp $
> -+ *
> -+ * LCD-Linux:
> -+ * Driver for HD44780 compatible displays connected to the parallel port.
> -+ *
> -+ * HD44780 header file.
> -+ *
> -+ * Copyright (C) 2004 - 2009 Mattia Jona-Lasinio (mjona at users.sourceforge.net)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ */
> -+
> -+#ifndef HD44780_H
> -+#define HD44780_H
> -+
> -+#include <linux/lcd-linux.h>
> -+
> -+#define HD44780_VERSION LCD_LINUX_VERSION /* Version number */
> -+#define HD44780_STRING "hd44780"
> -+
> -+#define HD44780_MINOR 0 /* Minor number for the hd44780 driver */
> -+
> -+
> -+/* flags */
> -+#define HD44780_CHECK_BF 0x00000001 /* Do busy flag checking */
> -+#define HD44780_4BITS_BUS 0x00000002 /* Set the bus length to 4 bits */
> -+#define HD44780_5X10_FONT 0x00000004 /* Use 5x10 dots fonts */
> -+
> -+/* IOCTLs */
> -+#define HD44780_READ_AC _IOR(LCD_MAJOR, 0x00, unsigned char *)
> -+
> -+#endif /* HD44780 included */
> -diff --git a/include/linux/lcd-linux.h b/include/linux/lcd-linux.h
> -new file mode 100644
> -index 0000000..1756107
> ---- /dev/null
> -+++ b/include/linux/lcd-linux.h
> -@@ -0,0 +1,158 @@
> -+/* lcd-linux.h
> -+ *
> -+ * $Id: lcd-linux.h,v 1.68 2010/07/04 16:02:02 mjona Exp $
> -+ *
> -+ * Software layer to drive LCD displays under Linux.
> -+ *
> -+ * External interface header file.
> -+ *
> -+ * Copyright (C) 2005 - 2009 Mattia Jona-Lasinio (mjona at users.sourceforge.net)
> -+ *
> -+ * This program is free software; you can redistribute it and/or modify
> -+ * it under the terms of the GNU General Public License as published by
> -+ * the Free Software Foundation; either version 2 of the License, or
> -+ * (at your option) any later version.
> -+ *
> -+ * This program is distributed in the hope that it will be useful,
> -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -+ * GNU General Public License for more details.
> -+ *
> -+ * You should have received a copy of the GNU General Public License
> -+ * along with this program; if not, write to the Free Software
> -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> -+ *
> -+ */
> -+
> -+#ifndef LCD_LINUX_H
> -+#define LCD_LINUX_H
> -+
> -+#ifndef LCD_LINUX_MAIN
> -+#warning
> -+#warning LCD-Linux is still in development stage and
> -+#warning aims at speed and optimization. For these
> -+#warning reasons there is no guarantee of backward
> -+#warning compatibility between different LCD-Linux
> -+#warning versions. Be sure to use the lcd-linux.h
> -+#warning file of the same version as the module.
> -+#warning "http://lcd-linux.sourceforge.net/"
> -+#warning
> -+#endif
> -+
> -+#define LCD_LINUX_VERSION "0.13.9" /* Version number */
> -+#define LCD_LINUX_STRING "lcd"
> -+
> -+#define LCD_MAJOR 120 /* Major number for this device
> -+ * Set this to 0 for dynamic allocation
> -+ */
> -+#define LCD_MINORS 8 /* Minors allocated for LCD-Linux*/
> -+
> -+#include <linux/types.h>
> -+
> -+#define str(s) #s
> -+#define string(s) str(s)
> -+
> -+struct lcd_parameters {
> -+ const char *name; /* Driver's name */
> -+ unsigned long flags; /* Flags (see documentation) */
> -+ unsigned short minor; /* Minor number of the char device */
> -+ unsigned short tabstop; /* Tab character length */
> -+ unsigned short num_cntr; /* Controllers to drive */
> -+ unsigned short cntr_rows; /* Rows per controller */
> -+ unsigned short cntr_cols; /* Display columns */
> -+ unsigned short vs_rows; /* Virtual screen rows */
> -+ unsigned short vs_cols; /* Virtual screen columns */
> -+ unsigned short cgram_chars; /* Number of user definable characters */
> -+ unsigned short cgram_bytes; /* Number of bytes required to define a
> -+ * user definable character */
> -+ unsigned char cgram_char0; /* Ascii of first user definable character */
> -+};
> -+
> -+/* IOCTLs */
> -+#include <asm/ioctl.h>
> -+#define LCDL_SET_PARAM _IOW(LCD_MAJOR, 0x80, struct lcd_parameters *)
> -+#define LCDL_GET_PARAM _IOR(LCD_MAJOR, 0x81, struct lcd_parameters *)
> -+#define LCDL_CHARSUBST _IOW(LCD_MAJOR, 0x82, unsigned char *)
> -+#define LCDL_RAW_MODE _IOW(LCD_MAJOR, 0x83, unsigned int)
> -+#define LCDL_RESET_CHARMAP _IO(LCD_MAJOR, 0x84)
> -+#define LCDL_SAVE_CHARMAP _IO(LCD_MAJOR, 0x85)
> -+#define LCDL_RESTORE_CHARMAP _IO(LCD_MAJOR, 0x86)
> -+#define LCDL_SWAP_CHARMAP _IO(LCD_MAJOR, 0x87)
> -+#define LCDL_CLEAR_DISP _IO(LCD_MAJOR, 0x88)
> -+#define LCDL_SET_CGRAM_CHAR _IOW(LCD_MAJOR, 0x89, unsigned char *)
> -+#define LCDL_GET_CGRAM_CHAR _IOR(LCD_MAJOR, 0x8a, unsigned char *)
> -+#define LCDL_SET_CHARMAP _IOW(LCD_MAJOR, 0x8b, unsigned char *)
> -+#define LCDL_GET_CHARMAP _IOR(LCD_MAJOR, 0x8c, unsigned char *)
> -+#define LCDL_MEMSET _IOW(LCD_MAJOR, 0x8d, unsigned int *)
> -+#define LCDL_MEMMOVE _IOW(LCD_MAJOR, 0x8e, unsigned int *)
> -+#define LCDL_IOATTR _IOW(LCD_MAJOR, 0x8f, unsigned int)
> -+
> -+
> -+
> -+#ifdef __KERNEL__ /* The rest is for kernel only */
> -+
> -+#include <linux/kernel.h>
> -+#include <linux/module.h>
> -+
> -+
> -+struct lcd_driver {
> -+ void (*read_char)(unsigned int offset, unsigned short *data);
> -+ void (*read_cgram_char)(unsigned char index, unsigned char *pixmap);
> -+ void (*write_char)(unsigned int offset, unsigned short data);
> -+ void (*write_cgram_char)(unsigned char index, unsigned char *pixmap);
> -+ void (*clear_display)(void);
> -+ void (*address_mode)(int mode);
> -+ int (*validate_driver)(void);
> -+ int (*init_display)(void);
> -+ int (*cleanup_display)(void);
> -+ int (*init_port)(void);
> -+ int (*cleanup_port)(void);
> -+ int (*handle_custom_char)(unsigned int data);
> -+ int (*handle_custom_ioctl)(unsigned int cmd, unsigned long arg, unsigned int arg_in_userspace);
> -+
> -+ /* The character map to be used */
> -+ unsigned char *charmap;
> -+
> -+ /* Buffer for CGRAM operations.
> -+ * Will be filled by the lcd-linux layer.
> -+ */
> -+ unsigned char *cgram_buffer;
> -+
> -+ /* The root where the driver can create its own proc files.
> -+ * Will be filled by the lcd-linux layer.
> -+ */
> -+ struct proc_dir_entry *driver_proc_root;
> -+
> -+ /* Set this field to 'driver_module_init' or call lcd_driver_setup
> -+ * just before registering the driver with lcd_register_driver.
> -+ */
> -+ struct module *driver_module;
> -+};
> -+
> -+#ifdef MODULE
> -+#define driver_module_init THIS_MODULE
> -+#else
> -+#define driver_module_init NULL
> -+#endif
> -+
> -+/* Always call lcd_driver_setup just before registering the driver
> -+ * with lcd_register_driver.
> -+ */
> -+static inline void lcd_driver_setup(struct lcd_driver *p)
> -+{
> -+ p->driver_module = driver_module_init;
> -+}
> -+
> -+/* External interface */
> -+struct lcd_struct;
> -+int lcd_register_driver(struct lcd_driver *drv, struct lcd_parameters *par);
> -+int lcd_unregister_driver(struct lcd_driver *drv, struct lcd_parameters *par);
> -+int lcd_open(unsigned short minor, struct lcd_struct **lcd);
> -+int lcd_close(struct lcd_struct **lcd);
> -+int lcd_ioctl(struct lcd_struct *lcd, unsigned int cmd, ...);
> -+ssize_t lcd_write(struct lcd_struct *lcd, const void *buffer, size_t length, loff_t offset, unsigned int with_attr);
> -+ssize_t lcd_read(struct lcd_struct *lcd, void *buffer, size_t length, loff_t offset, unsigned int with_attr);
> -+
> -+#endif /* __KERNEL__ */
> -+
> -+#endif /* External interface included */
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/0024-ts72xx-add-GPIO-keys.patch b/recipes/linux/linux-2.6.36/ts72xx/0024-ts72xx-add-GPIO-keys.patch
> deleted file mode 100644
> index dc345fa..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/0024-ts72xx-add-GPIO-keys.patch
> +++ /dev/null
> @@ -1,100 +0,0 @@
> -From f483d4e7564786a26343900277ee9ebd2405217e Mon Sep 17 00:00:00 2001
> -From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz at true.cz>
> -Date: Sun, 7 Nov 2010 18:34:39 +0100
> -Subject: [PATCH 24/24] ts72xx: add GPIO keys
> -MIME-Version: 1.0
> -Content-Type: text/plain; charset=UTF-8
> -Content-Transfer-Encoding: 8bit
> -
> -Signed-off-by: Petr Štetiar <ynezz at true.cz>
> ----
> - arch/arm/mach-ep93xx/Kconfig | 6 ++++++
> - arch/arm/mach-ep93xx/ts72xx.c | 36 ++++++++++++++++++++++++++++++++++++
> - 2 files changed, 42 insertions(+), 0 deletions(-)
> -
> -diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
> -index 2bfb01e..185c5a9 100644
> ---- a/arch/arm/mach-ep93xx/Kconfig
> -+++ b/arch/arm/mach-ep93xx/Kconfig
> -@@ -219,6 +219,12 @@ config MACH_TS72XX_SBCINFO
> - Say 'Y' to add a procfs entry containing some information
> - related to Technologic Systems TS-72xx SBC.
> -
> -+config MACH_TS72XX_GPIO_KEYS
> -+ bool "Enable GPIO keys"
> -+ depends on MACH_TS72XX
> -+ help
> -+ Say 'Y' here to enable GPIO keys on DIO connector.
> -+ Current config is KEY_UP for DIO_1 and KEY_DOWN for DIO_2.
> - endmenu
> -
> - endif
> -diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
> -index 0c07bd8..f7b82dd 100644
> ---- a/arch/arm/mach-ep93xx/ts72xx.c
> -+++ b/arch/arm/mach-ep93xx/ts72xx.c
> -@@ -21,11 +21,13 @@
> - #include <linux/mtd/partitions.h>
> - #include <linux/mtd/physmap.h>
> - #include <linux/gpio.h>
> -+#include <linux/gpio_keys.h>
> - #include <linux/i2c.h>
> - #include <linux/i2c-gpio.h>
> - #include <linux/mtd/nand.h>
> - #include <linux/mtd/partitions.h>
> - #include <linux/spi/spi.h>
> -+#include <linux/input.h>
> -
> - #include <mach/ep93xx_spi.h>
> - #include <mach/hardware.h>
> -@@ -437,6 +439,36 @@ static struct ep93xx_spi_info ts72xx_spi_info = {
> - };
> - #endif
> -
> -+#if defined(CONFIG_MACH_TS72XX_GPIO_KEYS)
> -+#define INIT_KEY(_code, _gpio, _desc) \
> -+ { \
> -+ .code = KEY_##_code, \
> -+ .gpio = _gpio, \
> -+ .desc = _desc, \
> -+ .wakeup = 1, \
> -+ .active_low = 1, \
> -+ .type = EV_KEY, \
> -+ }
> -+
> -+static struct gpio_keys_button ts72xx_button_table[] = {
> -+ INIT_KEY(UP, EP93XX_GPIO_LINE_EGPIO11, "Up button - DIO_2"),
> -+ INIT_KEY(DOWN, EP93XX_GPIO_LINE_EGPIO12, "Down button - DIO_3"),
> -+};
> -+
> -+static struct gpio_keys_platform_data gpio_keys_data = {
> -+ .buttons = ts72xx_button_table,
> -+ .nbuttons = ARRAY_SIZE(ts72xx_button_table),
> -+};
> -+
> -+static struct platform_device ts72xx_gpio_keys = {
> -+ .name = "gpio-keys",
> -+ .dev = {
> -+ .platform_data = &gpio_keys_data,
> -+ },
> -+ .id = -1,
> -+};
> -+#endif
> -+
> - static void __init ts72xx_init_machine(void)
> - {
> - ep93xx_init_devices();
> -@@ -445,6 +477,10 @@ static void __init ts72xx_init_machine(void)
> - platform_device_register(&ts72xx_rtc_device);
> - platform_device_register(&ts72xx_wdt_device);
> -
> -+#if defined(CONFIG_MACH_TS72XX_GPIO_KEYS)
> -+ platform_device_register(&ts72xx_gpio_keys);
> -+#endif
> -+
> - ep93xx_register_eth(&ts72xx_eth_data, 1);
> - ep93xx_register_i2c(&ts72xx_i2c_gpio_data,
> - ts72xx_i2c_board_info,
> ---
> -1.7.0.4
> -
> diff --git a/recipes/linux/linux-2.6.36/ts72xx/defconfig b/recipes/linux/linux-2.6.36/ts72xx/defconfig
> deleted file mode 100644
> index 37f95f6..0000000
> --- a/recipes/linux/linux-2.6.36/ts72xx/defconfig
> +++ /dev/null
> @@ -1,2127 +0,0 @@
> -#
> -# Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.36
> -# Thu Nov 18 20:05:41 2010
> -#
> -CONFIG_ARM=y
> -CONFIG_SYS_SUPPORTS_APM_EMULATION=y
> -CONFIG_GENERIC_GPIO=y
> -CONFIG_ARCH_USES_GETTIMEOFFSET=y
> -CONFIG_HAVE_PROC_CPU=y
> -CONFIG_GENERIC_HARDIRQS=y
> -CONFIG_STACKTRACE_SUPPORT=y
> -CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> -CONFIG_LOCKDEP_SUPPORT=y
> -CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> -CONFIG_HARDIRQS_SW_RESEND=y
> -CONFIG_GENERIC_IRQ_PROBE=y
> -CONFIG_RWSEM_GENERIC_SPINLOCK=y
> -CONFIG_GENERIC_HWEIGHT=y
> -CONFIG_GENERIC_CALIBRATE_DELAY=y
> -CONFIG_NEED_DMA_MAP_STATE=y
> -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> -CONFIG_VECTORS_BASE=0xffff0000
> -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> -CONFIG_CONSTRUCTORS=y
> -
> -#
> -# General setup
> -#
> -CONFIG_EXPERIMENTAL=y
> -CONFIG_BROKEN_ON_SMP=y
> -CONFIG_LOCK_KERNEL=y
> -CONFIG_INIT_ENV_ARG_LIMIT=32
> -CONFIG_CROSS_COMPILE=""
> -CONFIG_LOCALVERSION=""
> -# CONFIG_LOCALVERSION_AUTO is not set
> -CONFIG_HAVE_KERNEL_GZIP=y
> -CONFIG_HAVE_KERNEL_LZMA=y
> -CONFIG_HAVE_KERNEL_LZO=y
> -CONFIG_KERNEL_GZIP=y
> -# CONFIG_KERNEL_LZMA is not set
> -# CONFIG_KERNEL_LZO is not set
> -CONFIG_SWAP=y
> -CONFIG_SYSVIPC=y
> -CONFIG_SYSVIPC_SYSCTL=y
> -CONFIG_POSIX_MQUEUE=y
> -CONFIG_POSIX_MQUEUE_SYSCTL=y
> -# CONFIG_BSD_PROCESS_ACCT is not set
> -# CONFIG_TASKSTATS is not set
> -# CONFIG_AUDIT is not set
> -
> -#
> -# RCU Subsystem
> -#
> -CONFIG_TREE_RCU=y
> -# CONFIG_TREE_PREEMPT_RCU is not set
> -# CONFIG_TINY_RCU is not set
> -# CONFIG_RCU_TRACE is not set
> -CONFIG_RCU_FANOUT=32
> -# CONFIG_RCU_FANOUT_EXACT is not set
> -# CONFIG_TREE_RCU_TRACE is not set
> -CONFIG_IKCONFIG=y
> -CONFIG_IKCONFIG_PROC=y
> -CONFIG_LOG_BUF_SHIFT=16
> -# CONFIG_CGROUPS is not set
> -# CONFIG_SYSFS_DEPRECATED_V2 is not set
> -CONFIG_RELAY=y
> -CONFIG_NAMESPACES=y
> -# CONFIG_UTS_NS is not set
> -CONFIG_IPC_NS=y
> -# CONFIG_USER_NS is not set
> -# CONFIG_PID_NS is not set
> -# CONFIG_NET_NS is not set
> -# CONFIG_BLK_DEV_INITRD is not set
> -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> -CONFIG_SYSCTL=y
> -CONFIG_ANON_INODES=y
> -CONFIG_EMBEDDED=y
> -CONFIG_UID16=y
> -CONFIG_SYSCTL_SYSCALL=y
> -CONFIG_KALLSYMS=y
> -# CONFIG_KALLSYMS_EXTRA_PASS is not set
> -CONFIG_HOTPLUG=y
> -CONFIG_PRINTK=y
> -CONFIG_BUG=y
> -CONFIG_ELF_CORE=y
> -CONFIG_BASE_FULL=y
> -CONFIG_FUTEX=y
> -CONFIG_EPOLL=y
> -CONFIG_SIGNALFD=y
> -CONFIG_TIMERFD=y
> -CONFIG_EVENTFD=y
> -CONFIG_SHMEM=y
> -CONFIG_AIO=y
> -CONFIG_HAVE_PERF_EVENTS=y
> -CONFIG_PERF_USE_VMALLOC=y
> -
> -#
> -# Kernel Performance Events And Counters
> -#
> -# CONFIG_PERF_EVENTS is not set
> -# CONFIG_PERF_COUNTERS is not set
> -CONFIG_VM_EVENT_COUNTERS=y
> -# CONFIG_COMPAT_BRK is not set
> -CONFIG_SLAB=y
> -# CONFIG_SLUB is not set
> -# CONFIG_SLOB is not set
> -# CONFIG_PROFILING is not set
> -CONFIG_HAVE_OPROFILE=y
> -# CONFIG_KPROBES is not set
> -CONFIG_HAVE_KPROBES=y
> -CONFIG_HAVE_KRETPROBES=y
> -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
> -CONFIG_HAVE_CLK=y
> -
> -#
> -# GCOV-based kernel profiling
> -#
> -CONFIG_HAVE_GENERIC_DMA_COHERENT=y
> -CONFIG_SLABINFO=y
> -CONFIG_RT_MUTEXES=y
> -CONFIG_BASE_SMALL=0
> -CONFIG_MODULES=y
> -# CONFIG_MODULE_FORCE_LOAD is not set
> -CONFIG_MODULE_UNLOAD=y
> -CONFIG_MODULE_FORCE_UNLOAD=y
> -CONFIG_MODVERSIONS=y
> -# CONFIG_MODULE_SRCVERSION_ALL is not set
> -CONFIG_BLOCK=y
> -CONFIG_LBDAF=y
> -CONFIG_BLK_DEV_BSG=y
> -# CONFIG_BLK_DEV_INTEGRITY is not set
> -
> -#
> -# IO Schedulers
> -#
> -CONFIG_IOSCHED_NOOP=y
> -CONFIG_IOSCHED_DEADLINE=m
> -CONFIG_IOSCHED_CFQ=y
> -CONFIG_DEFAULT_CFQ=y
> -# CONFIG_DEFAULT_NOOP is not set
> -CONFIG_DEFAULT_IOSCHED="cfq"
> -# CONFIG_INLINE_SPIN_TRYLOCK is not set
> -# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
> -# CONFIG_INLINE_SPIN_LOCK is not set
> -# CONFIG_INLINE_SPIN_LOCK_BH is not set
> -# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
> -# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
> -# CONFIG_INLINE_SPIN_UNLOCK is not set
> -# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
> -# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
> -# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
> -# CONFIG_INLINE_READ_TRYLOCK is not set
> -# CONFIG_INLINE_READ_LOCK is not set
> -# CONFIG_INLINE_READ_LOCK_BH is not set
> -# CONFIG_INLINE_READ_LOCK_IRQ is not set
> -# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
> -# CONFIG_INLINE_READ_UNLOCK is not set
> -# CONFIG_INLINE_READ_UNLOCK_BH is not set
> -# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
> -# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
> -# CONFIG_INLINE_WRITE_TRYLOCK is not set
> -# CONFIG_INLINE_WRITE_LOCK is not set
> -# CONFIG_INLINE_WRITE_LOCK_BH is not set
> -# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
> -# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
> -# CONFIG_INLINE_WRITE_UNLOCK is not set
> -# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
> -# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
> -# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
> -# CONFIG_MUTEX_SPIN_ON_OWNER is not set
> -# CONFIG_FREEZER is not set
> -
> -#
> -# System Type
> -#
> -CONFIG_MMU=y
> -# CONFIG_ARCH_AAEC2000 is not set
> -# CONFIG_ARCH_INTEGRATOR is not set
> -# CONFIG_ARCH_REALVIEW is not set
> -# CONFIG_ARCH_VERSATILE is not set
> -# CONFIG_ARCH_VEXPRESS is not set
> -# CONFIG_ARCH_AT91 is not set
> -# CONFIG_ARCH_BCMRING is not set
> -# CONFIG_ARCH_CLPS711X is not set
> -# CONFIG_ARCH_CNS3XXX is not set
> -# CONFIG_ARCH_GEMINI is not set
> -# CONFIG_ARCH_EBSA110 is not set
> -CONFIG_ARCH_EP93XX=y
> -# CONFIG_ARCH_FOOTBRIDGE is not set
> -# CONFIG_ARCH_MXC is not set
> -# CONFIG_ARCH_STMP3XXX is not set
> -# CONFIG_ARCH_NETX is not set
> -# CONFIG_ARCH_H720X is not set
> -# CONFIG_ARCH_IOP13XX is not set
> -# CONFIG_ARCH_IOP32X is not set
> -# CONFIG_ARCH_IOP33X is not set
> -# CONFIG_ARCH_IXP23XX is not set
> -# CONFIG_ARCH_IXP2000 is not set
> -# CONFIG_ARCH_IXP4XX is not set
> -# CONFIG_ARCH_DOVE is not set
> -# CONFIG_ARCH_KIRKWOOD is not set
> -# CONFIG_ARCH_LOKI is not set
> -# CONFIG_ARCH_LPC32XX is not set
> -# CONFIG_ARCH_MV78XX0 is not set
> -# CONFIG_ARCH_ORION5X is not set
> -# CONFIG_ARCH_MMP is not set
> -# CONFIG_ARCH_KS8695 is not set
> -# CONFIG_ARCH_NS9XXX is not set
> -# CONFIG_ARCH_W90X900 is not set
> -# CONFIG_ARCH_NUC93X is not set
> -# CONFIG_ARCH_TEGRA is not set
> -# CONFIG_ARCH_PNX4008 is not set
> -# CONFIG_ARCH_PXA is not set
> -# CONFIG_ARCH_MSM is not set
> -# CONFIG_ARCH_SHMOBILE is not set
> -# CONFIG_ARCH_RPC is not set
> -# CONFIG_ARCH_SA1100 is not set
> -# CONFIG_ARCH_S3C2410 is not set
> -# CONFIG_ARCH_S3C64XX is not set
> -# CONFIG_ARCH_S5P6440 is not set
> -# CONFIG_ARCH_S5P6442 is not set
> -# CONFIG_ARCH_S5PC100 is not set
> -# CONFIG_ARCH_S5PV210 is not set
> -# CONFIG_ARCH_S5PV310 is not set
> -# CONFIG_ARCH_SHARK is not set
> -# CONFIG_ARCH_LH7A40X is not set
> -# CONFIG_ARCH_U300 is not set
> -# CONFIG_ARCH_U8500 is not set
> -# CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_DAVINCI is not set
> -# CONFIG_ARCH_OMAP is not set
> -# CONFIG_PLAT_SPEAR is not set
> -
> -#
> -# Cirrus EP93xx Implementation Options
> -#
> -# CONFIG_CRUNCH is not set
> -CONFIG_CR1_NFBIT=y
> -
> -#
> -# EP93xx Platforms
> -#
> -CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
> -# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
> -# CONFIG_EP93XX_SDCE1_PHYS_OFFSET is not set
> -# CONFIG_EP93XX_SDCE2_PHYS_OFFSET is not set
> -# CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET is not set
> -# CONFIG_MACH_ADSSPHERE is not set
> -# CONFIG_MACH_EDB9301 is not set
> -# CONFIG_MACH_EDB9302 is not set
> -# CONFIG_MACH_EDB9307 is not set
> -# CONFIG_MACH_EDB9312 is not set
> -# CONFIG_MACH_EDB9315 is not set
> -# CONFIG_MACH_GESBC9312 is not set
> -# CONFIG_MACH_MICRO9H is not set
> -# CONFIG_MACH_MICRO9L is not set
> -CONFIG_MACH_TS72XX=y
> -CONFIG_EP93XX_EARLY_UART1=y
> -# CONFIG_EP93XX_EARLY_UART2 is not set
> -# CONFIG_EP93XX_EARLY_UART3 is not set
> -CONFIG_MACH_TS72XX_FORCE_MACHINEID=y
> -CONFIG_MACH_TS72XX_SBCINFO=m
> -CONFIG_MACH_TS72XX_GPIO_KEYS=y
> -
> -#
> -# Processor Type
> -#
> -CONFIG_CPU_ARM920T=y
> -CONFIG_CPU_32v4T=y
> -CONFIG_CPU_ABRT_EV4T=y
> -CONFIG_CPU_PABRT_LEGACY=y
> -CONFIG_CPU_CACHE_V4WT=y
> -CONFIG_CPU_CACHE_VIVT=y
> -CONFIG_CPU_COPY_V4WB=y
> -CONFIG_CPU_TLB_V4WBI=y
> -CONFIG_CPU_CP15=y
> -CONFIG_CPU_CP15_MMU=y
> -
> -#
> -# Processor Features
> -#
> -CONFIG_ARM_THUMB=y
> -# CONFIG_CPU_ICACHE_DISABLE is not set
> -# CONFIG_CPU_DCACHE_DISABLE is not set
> -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
> -CONFIG_ARM_L1_CACHE_SHIFT=5
> -CONFIG_ARM_VIC=y
> -CONFIG_ARM_VIC_NR=2
> -CONFIG_COMMON_CLKDEV=y
> -
> -#
> -# Bus support
> -#
> -CONFIG_ARM_AMBA=y
> -# CONFIG_PCI_SYSCALL is not set
> -# CONFIG_ARCH_SUPPORTS_MSI is not set
> -# CONFIG_PCCARD is not set
> -
> -#
> -# Kernel Features
> -#
> -CONFIG_VMSPLIT_3G=y
> -# CONFIG_VMSPLIT_2G is not set
> -# CONFIG_VMSPLIT_1G is not set
> -CONFIG_PAGE_OFFSET=0xC0000000
> -# CONFIG_PREEMPT_NONE is not set
> -# CONFIG_PREEMPT_VOLUNTARY is not set
> -CONFIG_PREEMPT=y
> -CONFIG_HZ=100
> -CONFIG_AEABI=y
> -# CONFIG_OABI_COMPAT is not set
> -CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
> -CONFIG_ARCH_SPARSEMEM_ENABLE=y
> -CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> -CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> -# CONFIG_HIGHMEM is not set
> -# CONFIG_SPARSE_IRQ is not set
> -CONFIG_SELECT_MEMORY_MODEL=y
> -CONFIG_SPARSEMEM_MANUAL=y
> -CONFIG_SPARSEMEM=y
> -CONFIG_HAVE_MEMORY_PRESENT=y
> -CONFIG_SPARSEMEM_EXTREME=y
> -CONFIG_HAVE_MEMBLOCK=y
> -CONFIG_SPLIT_PTLOCK_CPUS=999999
> -# CONFIG_PHYS_ADDR_T_64BIT is not set
> -CONFIG_ZONE_DMA_FLAG=0
> -CONFIG_VIRT_TO_BUS=y
> -# CONFIG_KSM is not set
> -CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
> -CONFIG_FORCE_MAX_ZONEORDER=11
> -CONFIG_ALIGNMENT_TRAP=y
> -# CONFIG_UACCESS_WITH_MEMCPY is not set
> -# CONFIG_CC_STACKPROTECTOR is not set
> -# CONFIG_DEPRECATED_PARAM_STRUCT is not set
> -
> -#
> -# Boot options
> -#
> -CONFIG_ZBOOT_ROM_TEXT=0
> -CONFIG_ZBOOT_ROM_BSS=0
> -CONFIG_CMDLINE=" debug "
> -# CONFIG_CMDLINE_FORCE is not set
> -# CONFIG_XIP_KERNEL is not set
> -CONFIG_KEXEC=y
> -CONFIG_ATAGS_PROC=y
> -# CONFIG_AUTO_ZRELADDR is not set
> -
> -#
> -# CPU Power Management
> -#
> -# CONFIG_CPU_IDLE is not set
> -
> -#
> -# Floating point emulation
> -#
> -
> -#
> -# At least one emulation must be selected
> -#
> -
> -#
> -# Userspace binary formats
> -#
> -CONFIG_BINFMT_ELF=y
> -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> -CONFIG_HAVE_AOUT=y
> -# CONFIG_BINFMT_AOUT is not set
> -CONFIG_BINFMT_MISC=m
> -
> -#
> -# Power management options
> -#
> -# CONFIG_PM is not set
> -CONFIG_ARCH_SUSPEND_POSSIBLE=y
> -CONFIG_NET=y
> -
> -#
> -# Networking options
> -#
> -CONFIG_PACKET=y
> -CONFIG_UNIX=y
> -CONFIG_XFRM=y
> -# CONFIG_XFRM_USER is not set
> -# CONFIG_XFRM_SUB_POLICY is not set
> -# CONFIG_XFRM_MIGRATE is not set
> -# CONFIG_XFRM_STATISTICS is not set
> -CONFIG_XFRM_IPCOMP=m
> -CONFIG_NET_KEY=m
> -# CONFIG_NET_KEY_MIGRATE is not set
> -CONFIG_INET=y
> -# CONFIG_IP_MULTICAST is not set
> -CONFIG_IP_ADVANCED_ROUTER=y
> -CONFIG_ASK_IP_FIB_HASH=y
> -# CONFIG_IP_FIB_TRIE is not set
> -CONFIG_IP_FIB_HASH=y
> -# CONFIG_IP_MULTIPLE_TABLES is not set
> -# CONFIG_IP_ROUTE_MULTIPATH is not set
> -CONFIG_IP_ROUTE_VERBOSE=y
> -CONFIG_IP_PNP=y
> -CONFIG_IP_PNP_DHCP=y
> -# CONFIG_IP_PNP_BOOTP is not set
> -# CONFIG_IP_PNP_RARP is not set
> -CONFIG_NET_IPIP=m
> -CONFIG_NET_IPGRE=m
> -# CONFIG_ARPD is not set
> -CONFIG_SYN_COOKIES=y
> -CONFIG_INET_AH=m
> -CONFIG_INET_ESP=m
> -CONFIG_INET_IPCOMP=m
> -CONFIG_INET_XFRM_TUNNEL=m
> -CONFIG_INET_TUNNEL=m
> -CONFIG_INET_XFRM_MODE_TRANSPORT=m
> -CONFIG_INET_XFRM_MODE_TUNNEL=m
> -CONFIG_INET_XFRM_MODE_BEET=m
> -# CONFIG_INET_LRO is not set
> -# CONFIG_INET_DIAG is not set
> -# CONFIG_TCP_CONG_ADVANCED is not set
> -CONFIG_TCP_CONG_CUBIC=y
> -CONFIG_DEFAULT_TCP_CONG="cubic"
> -# CONFIG_TCP_MD5SIG is not set
> -CONFIG_IPV6=m
> -CONFIG_IPV6_PRIVACY=y
> -CONFIG_IPV6_ROUTER_PREF=y
> -CONFIG_IPV6_ROUTE_INFO=y
> -CONFIG_IPV6_OPTIMISTIC_DAD=y
> -CONFIG_INET6_AH=m
> -CONFIG_INET6_ESP=m
> -CONFIG_INET6_IPCOMP=m
> -CONFIG_IPV6_MIP6=m
> -CONFIG_INET6_XFRM_TUNNEL=m
> -CONFIG_INET6_TUNNEL=m
> -CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> -CONFIG_INET6_XFRM_MODE_TUNNEL=m
> -CONFIG_INET6_XFRM_MODE_BEET=m
> -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> -CONFIG_IPV6_SIT=m
> -# CONFIG_IPV6_SIT_6RD is not set
> -CONFIG_IPV6_NDISC_NODETYPE=y
> -CONFIG_IPV6_TUNNEL=m
> -# CONFIG_IPV6_MULTIPLE_TABLES is not set
> -# CONFIG_IPV6_MROUTE is not set
> -# CONFIG_NETLABEL is not set
> -CONFIG_NETWORK_SECMARK=y
> -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
> -CONFIG_NETFILTER=y
> -# CONFIG_NETFILTER_DEBUG is not set
> -CONFIG_NETFILTER_ADVANCED=y
> -
> -#
> -# Core Netfilter Configuration
> -#
> -CONFIG_NETFILTER_NETLINK=m
> -CONFIG_NETFILTER_NETLINK_QUEUE=m
> -CONFIG_NETFILTER_NETLINK_LOG=m
> -CONFIG_NF_CONNTRACK=m
> -CONFIG_NF_CONNTRACK_MARK=y
> -CONFIG_NF_CONNTRACK_SECMARK=y
> -CONFIG_NF_CONNTRACK_ZONES=y
> -CONFIG_NF_CONNTRACK_EVENTS=y
> -CONFIG_NF_CT_PROTO_DCCP=m
> -CONFIG_NF_CT_PROTO_GRE=m
> -CONFIG_NF_CT_PROTO_SCTP=m
> -CONFIG_NF_CT_PROTO_UDPLITE=m
> -CONFIG_NF_CONNTRACK_AMANDA=m
> -CONFIG_NF_CONNTRACK_FTP=m
> -CONFIG_NF_CONNTRACK_H323=m
> -CONFIG_NF_CONNTRACK_IRC=m
> -CONFIG_NF_CONNTRACK_NETBIOS_NS=m
> -CONFIG_NF_CONNTRACK_PPTP=m
> -CONFIG_NF_CONNTRACK_SANE=m
> -CONFIG_NF_CONNTRACK_SIP=m
> -CONFIG_NF_CONNTRACK_TFTP=m
> -CONFIG_NF_CT_NETLINK=m
> -# CONFIG_NETFILTER_TPROXY is not set
> -CONFIG_NETFILTER_XTABLES=m
> -
> -#
> -# Xtables combined modules
> -#
> -CONFIG_NETFILTER_XT_MARK=m
> -CONFIG_NETFILTER_XT_CONNMARK=m
> -
> -#
> -# Xtables targets
> -#
> -# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
> -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
> -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
> -CONFIG_NETFILTER_XT_TARGET_CT=m
> -CONFIG_NETFILTER_XT_TARGET_DSCP=m
> -CONFIG_NETFILTER_XT_TARGET_HL=m
> -# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
> -CONFIG_NETFILTER_XT_TARGET_LED=m
> -CONFIG_NETFILTER_XT_TARGET_MARK=m
> -CONFIG_NETFILTER_XT_TARGET_NFLOG=m
> -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
> -CONFIG_NETFILTER_XT_TARGET_RATEEST=m
> -# CONFIG_NETFILTER_XT_TARGET_TEE is not set
> -CONFIG_NETFILTER_XT_TARGET_TRACE=m
> -CONFIG_NETFILTER_XT_TARGET_SECMARK=m
> -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
> -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
> -
> -#
> -# Xtables matches
> -#
> -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
> -CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
> -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> -# CONFIG_NETFILTER_XT_MATCH_CPU is not set
> -CONFIG_NETFILTER_XT_MATCH_DCCP=m
> -CONFIG_NETFILTER_XT_MATCH_DSCP=m
> -CONFIG_NETFILTER_XT_MATCH_ESP=m
> -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
> -CONFIG_NETFILTER_XT_MATCH_HELPER=m
> -CONFIG_NETFILTER_XT_MATCH_HL=m
> -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
> -CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> -CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> -CONFIG_NETFILTER_XT_MATCH_MAC=m
> -CONFIG_NETFILTER_XT_MATCH_MARK=m
> -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> -CONFIG_NETFILTER_XT_MATCH_OSF=m
> -CONFIG_NETFILTER_XT_MATCH_OWNER=m
> -CONFIG_NETFILTER_XT_MATCH_POLICY=m
> -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> -CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> -CONFIG_NETFILTER_XT_MATCH_RATEEST=m
> -CONFIG_NETFILTER_XT_MATCH_REALM=m
> -CONFIG_NETFILTER_XT_MATCH_RECENT=m
> -CONFIG_NETFILTER_XT_MATCH_SCTP=m
> -CONFIG_NETFILTER_XT_MATCH_STATE=m
> -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> -CONFIG_NETFILTER_XT_MATCH_STRING=m
> -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> -CONFIG_NETFILTER_XT_MATCH_TIME=m
> -CONFIG_NETFILTER_XT_MATCH_U32=m
> -# CONFIG_IP_VS is not set
> -
> -#
> -# IP: Netfilter Configuration
> -#
> -CONFIG_NF_DEFRAG_IPV4=m
> -CONFIG_NF_CONNTRACK_IPV4=m
> -CONFIG_NF_CONNTRACK_PROC_COMPAT=y
> -CONFIG_IP_NF_QUEUE=m
> -CONFIG_IP_NF_IPTABLES=m
> -CONFIG_IP_NF_MATCH_ADDRTYPE=m
> -CONFIG_IP_NF_MATCH_AH=m
> -CONFIG_IP_NF_MATCH_ECN=m
> -CONFIG_IP_NF_MATCH_TTL=m
> -CONFIG_IP_NF_FILTER=m
> -CONFIG_IP_NF_TARGET_REJECT=m
> -CONFIG_IP_NF_TARGET_LOG=m
> -CONFIG_IP_NF_TARGET_ULOG=m
> -CONFIG_NF_NAT=m
> -CONFIG_NF_NAT_NEEDED=y
> -CONFIG_IP_NF_TARGET_MASQUERADE=m
> -CONFIG_IP_NF_TARGET_NETMAP=m
> -CONFIG_IP_NF_TARGET_REDIRECT=m
> -CONFIG_NF_NAT_SNMP_BASIC=m
> -CONFIG_NF_NAT_PROTO_DCCP=m
> -CONFIG_NF_NAT_PROTO_GRE=m
> -CONFIG_NF_NAT_PROTO_UDPLITE=m
> -CONFIG_NF_NAT_PROTO_SCTP=m
> -CONFIG_NF_NAT_FTP=m
> -CONFIG_NF_NAT_IRC=m
> -CONFIG_NF_NAT_TFTP=m
> -CONFIG_NF_NAT_AMANDA=m
> -CONFIG_NF_NAT_PPTP=m
> -CONFIG_NF_NAT_H323=m
> -CONFIG_NF_NAT_SIP=m
> -CONFIG_IP_NF_MANGLE=m
> -CONFIG_IP_NF_TARGET_CLUSTERIP=m
> -CONFIG_IP_NF_TARGET_ECN=m
> -CONFIG_IP_NF_TARGET_TTL=m
> -CONFIG_IP_NF_RAW=m
> -CONFIG_IP_NF_SECURITY=m
> -CONFIG_IP_NF_ARPTABLES=m
> -CONFIG_IP_NF_ARPFILTER=m
> -CONFIG_IP_NF_ARP_MANGLE=m
> -
> -#
> -# IPv6: Netfilter Configuration
> -#
> -CONFIG_NF_CONNTRACK_IPV6=m
> -CONFIG_IP6_NF_QUEUE=m
> -CONFIG_IP6_NF_IPTABLES=m
> -CONFIG_IP6_NF_MATCH_AH=m
> -CONFIG_IP6_NF_MATCH_EUI64=m
> -CONFIG_IP6_NF_MATCH_FRAG=m
> -CONFIG_IP6_NF_MATCH_OPTS=m
> -CONFIG_IP6_NF_MATCH_HL=m
> -CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> -CONFIG_IP6_NF_MATCH_MH=m
> -CONFIG_IP6_NF_MATCH_RT=m
> -CONFIG_IP6_NF_TARGET_HL=m
> -CONFIG_IP6_NF_TARGET_LOG=m
> -CONFIG_IP6_NF_FILTER=m
> -CONFIG_IP6_NF_TARGET_REJECT=m
> -CONFIG_IP6_NF_MANGLE=m
> -CONFIG_IP6_NF_RAW=m
> -CONFIG_IP6_NF_SECURITY=m
> -# CONFIG_IP_DCCP is not set
> -# CONFIG_IP_SCTP is not set
> -# CONFIG_RDS is not set
> -# CONFIG_TIPC is not set
> -# CONFIG_ATM is not set
> -# CONFIG_L2TP is not set
> -# CONFIG_BRIDGE is not set
> -# CONFIG_NET_DSA is not set
> -# CONFIG_VLAN_8021Q is not set
> -# CONFIG_DECNET is not set
> -# CONFIG_LLC2 is not set
> -# CONFIG_IPX is not set
> -# CONFIG_ATALK is not set
> -# CONFIG_X25 is not set
> -# CONFIG_LAPB is not set
> -# CONFIG_ECONET is not set
> -# CONFIG_WAN_ROUTER is not set
> -# CONFIG_PHONET is not set
> -# CONFIG_IEEE802154 is not set
> -# CONFIG_NET_SCHED is not set
> -CONFIG_NET_CLS_ROUTE=y
> -# CONFIG_DCB is not set
> -CONFIG_DNS_RESOLVER=y
> -
> -#
> -# Network testing
> -#
> -# CONFIG_NET_PKTGEN is not set
> -# CONFIG_HAMRADIO is not set
> -# CONFIG_CAN is not set
> -# CONFIG_IRDA is not set
> -# CONFIG_BT is not set
> -# CONFIG_AF_RXRPC is not set
> -CONFIG_WIRELESS=y
> -CONFIG_WIRELESS_EXT=y
> -CONFIG_WEXT_CORE=y
> -CONFIG_WEXT_PROC=y
> -CONFIG_WEXT_SPY=y
> -CONFIG_WEXT_PRIV=y
> -CONFIG_CFG80211=m
> -# CONFIG_NL80211_TESTMODE is not set
> -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
> -# CONFIG_CFG80211_REG_DEBUG is not set
> -CONFIG_CFG80211_DEFAULT_PS=y
> -# CONFIG_CFG80211_INTERNAL_REGDB is not set
> -CONFIG_CFG80211_WEXT=y
> -CONFIG_WIRELESS_EXT_SYSFS=y
> -CONFIG_LIB80211=m
> -CONFIG_LIB80211_CRYPT_WEP=m
> -CONFIG_LIB80211_CRYPT_CCMP=m
> -CONFIG_LIB80211_CRYPT_TKIP=m
> -# CONFIG_LIB80211_DEBUG is not set
> -CONFIG_MAC80211=m
> -CONFIG_MAC80211_HAS_RC=y
> -CONFIG_MAC80211_RC_PID=y
> -# CONFIG_MAC80211_RC_MINSTREL is not set
> -CONFIG_MAC80211_RC_DEFAULT_PID=y
> -CONFIG_MAC80211_RC_DEFAULT="pid"
> -# CONFIG_MAC80211_MESH is not set
> -CONFIG_MAC80211_LEDS=y
> -# CONFIG_MAC80211_DEBUG_MENU is not set
> -# CONFIG_WIMAX is not set
> -# CONFIG_RFKILL is not set
> -# CONFIG_NET_9P is not set
> -# CONFIG_CAIF is not set
> -
> -#
> -# Device Drivers
> -#
> -
> -#
> -# Generic Driver Options
> -#
> -CONFIG_UEVENT_HELPER_PATH=""
> -CONFIG_DEVTMPFS=y
> -CONFIG_DEVTMPFS_MOUNT=y
> -CONFIG_STANDALONE=y
> -CONFIG_PREVENT_FIRMWARE_BUILD=y
> -CONFIG_FW_LOADER=m
> -CONFIG_FIRMWARE_IN_KERNEL=y
> -CONFIG_EXTRA_FIRMWARE=""
> -# CONFIG_SYS_HYPERVISOR is not set
> -CONFIG_CONNECTOR=m
> -CONFIG_MTD=y
> -# CONFIG_MTD_DEBUG is not set
> -# CONFIG_MTD_TESTS is not set
> -# CONFIG_MTD_CONCAT is not set
> -CONFIG_MTD_PARTITIONS=y
> -CONFIG_MTD_REDBOOT_PARTS=y
> -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> -CONFIG_MTD_CMDLINE_PARTS=y
> -# CONFIG_MTD_AFS_PARTS is not set
> -# CONFIG_MTD_AR7_PARTS is not set
> -
> -#
> -# User Modules And Translation Layers
> -#
> -CONFIG_MTD_CHAR=y
> -CONFIG_MTD_BLKDEVS=y
> -CONFIG_MTD_BLOCK=y
> -# CONFIG_FTL is not set
> -# CONFIG_NFTL is not set
> -# CONFIG_INFTL is not set
> -# CONFIG_RFD_FTL is not set
> -# CONFIG_SSFDC is not set
> -# CONFIG_SM_FTL is not set
> -# CONFIG_MTD_OOPS is not set
> -
> -#
> -# RAM/ROM/Flash chip drivers
> -#
> -# CONFIG_MTD_CFI is not set
> -# CONFIG_MTD_JEDECPROBE is not set
> -CONFIG_MTD_MAP_BANK_WIDTH_1=y
> -CONFIG_MTD_MAP_BANK_WIDTH_2=y
> -CONFIG_MTD_MAP_BANK_WIDTH_4=y
> -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> -CONFIG_MTD_CFI_I1=y
> -CONFIG_MTD_CFI_I2=y
> -# CONFIG_MTD_CFI_I4 is not set
> -# CONFIG_MTD_CFI_I8 is not set
> -# CONFIG_MTD_RAM is not set
> -# CONFIG_MTD_ROM is not set
> -# CONFIG_MTD_ABSENT is not set
> -
> -#
> -# Mapping drivers for chip access
> -#
> -# CONFIG_MTD_COMPLEX_MAPPINGS is not set
> -# CONFIG_MTD_PLATRAM is not set
> -
> -#
> -# Self-contained MTD device drivers
> -#
> -# CONFIG_MTD_DATAFLASH is not set
> -# CONFIG_MTD_M25P80 is not set
> -# CONFIG_MTD_SST25L is not set
> -# CONFIG_MTD_SLRAM is not set
> -# CONFIG_MTD_PHRAM is not set
> -# CONFIG_MTD_MTDRAM is not set
> -# CONFIG_MTD_BLOCK2MTD is not set
> -
> -#
> -# Disk-On-Chip Device Drivers
> -#
> -# CONFIG_MTD_DOC2000 is not set
> -# CONFIG_MTD_DOC2001 is not set
> -# CONFIG_MTD_DOC2001PLUS is not set
> -CONFIG_MTD_NAND_ECC=y
> -# CONFIG_MTD_NAND_ECC_SMC is not set
> -CONFIG_MTD_NAND=y
> -# CONFIG_MTD_NAND_VERIFY_WRITE is not set
> -# CONFIG_MTD_SM_COMMON is not set
> -# CONFIG_MTD_NAND_MUSEUM_IDS is not set
> -# CONFIG_MTD_NAND_GPIO is not set
> -CONFIG_MTD_NAND_IDS=y
> -# CONFIG_MTD_NAND_DISKONCHIP is not set
> -# CONFIG_MTD_NAND_NANDSIM is not set
> -CONFIG_MTD_NAND_PLATFORM=y
> -# CONFIG_MTD_ALAUDA is not set
> -# CONFIG_MTD_ONENAND is not set
> -
> -#
> -# LPDDR flash memory drivers
> -#
> -# CONFIG_MTD_LPDDR is not set
> -
> -#
> -# UBI - Unsorted block images
> -#
> -CONFIG_MTD_UBI=y
> -CONFIG_MTD_UBI_WL_THRESHOLD=4096
> -CONFIG_MTD_UBI_BEB_RESERVE=1
> -# CONFIG_MTD_UBI_GLUEBI is not set
> -
> -#
> -# UBI debugging options
> -#
> -# CONFIG_MTD_UBI_DEBUG is not set
> -# CONFIG_PARPORT is not set
> -CONFIG_BLK_DEV=y
> -# CONFIG_BLK_DEV_COW_COMMON is not set
> -CONFIG_BLK_DEV_LOOP=y
> -CONFIG_BLK_DEV_CRYPTOLOOP=m
> -# CONFIG_BLK_DEV_DRBD is not set
> -CONFIG_BLK_DEV_NBD=m
> -# CONFIG_BLK_DEV_UB is not set
> -CONFIG_BLK_DEV_RAM=m
> -CONFIG_BLK_DEV_RAM_COUNT=16
> -CONFIG_BLK_DEV_RAM_SIZE=65536
> -# CONFIG_BLK_DEV_XIP is not set
> -# CONFIG_CDROM_PKTCDVD is not set
> -# CONFIG_ATA_OVER_ETH is not set
> -# CONFIG_MG_DISK is not set
> -CONFIG_BLK_DEV_TS72XX_SDCARD=y
> -CONFIG_MISC_DEVICES=y
> -# CONFIG_AD525X_DPOT is not set
> -# CONFIG_ICS932S401 is not set
> -# CONFIG_ENCLOSURE_SERVICES is not set
> -# CONFIG_ISL29003 is not set
> -# CONFIG_SENSORS_TSL2550 is not set
> -# CONFIG_SENSORS_BH1780 is not set
> -# CONFIG_HMC6352 is not set
> -CONFIG_EP93XX_PWM=m
> -# CONFIG_DS1682 is not set
> -# CONFIG_TI_DAC7512 is not set
> -# CONFIG_BMP085 is not set
> -# CONFIG_C2PORT is not set
> -
> -#
> -# EEPROM support
> -#
> -# CONFIG_EEPROM_AT24 is not set
> -# CONFIG_EEPROM_AT25 is not set
> -# CONFIG_EEPROM_LEGACY is not set
> -# CONFIG_EEPROM_MAX6875 is not set
> -CONFIG_EEPROM_93CX6=m
> -# CONFIG_IWMC3200TOP is not set
> -CONFIG_TS72XX_MAX197=m
> -CONFIG_TS72XX_MAX197_AVERAGE=y
> -CONFIG_HAVE_IDE=y
> -# CONFIG_IDE is not set
> -
> -#
> -# SCSI device support
> -#
> -CONFIG_SCSI_MOD=m
> -# CONFIG_RAID_ATTRS is not set
> -CONFIG_SCSI=m
> -CONFIG_SCSI_DMA=y
> -CONFIG_SCSI_TGT=m
> -# CONFIG_SCSI_NETLINK is not set
> -CONFIG_SCSI_PROC_FS=y
> -
> -#
> -# SCSI support type (disk, tape, CD-ROM)
> -#
> -CONFIG_BLK_DEV_SD=m
> -# CONFIG_CHR_DEV_ST is not set
> -# CONFIG_CHR_DEV_OSST is not set
> -# CONFIG_BLK_DEV_SR is not set
> -CONFIG_CHR_DEV_SG=m
> -# CONFIG_CHR_DEV_SCH is not set
> -# CONFIG_SCSI_MULTI_LUN is not set
> -# CONFIG_SCSI_CONSTANTS is not set
> -# CONFIG_SCSI_LOGGING is not set
> -# CONFIG_SCSI_SCAN_ASYNC is not set
> -CONFIG_SCSI_WAIT_SCAN=m
> -
> -#
> -# SCSI Transports
> -#
> -# CONFIG_SCSI_SPI_ATTRS is not set
> -# CONFIG_SCSI_FC_ATTRS is not set
> -# CONFIG_SCSI_ISCSI_ATTRS is not set
> -# CONFIG_SCSI_SAS_ATTRS is not set
> -# CONFIG_SCSI_SAS_LIBSAS is not set
> -# CONFIG_SCSI_SRP_ATTRS is not set
> -# CONFIG_SCSI_LOWLEVEL is not set
> -# CONFIG_SCSI_DH is not set
> -# CONFIG_SCSI_OSD_INITIATOR is not set
> -CONFIG_ATA=m
> -# CONFIG_ATA_NONSTANDARD is not set
> -# CONFIG_ATA_VERBOSE_ERROR is not set
> -# CONFIG_SATA_PMP is not set
> -
> -#
> -# Controllers with non-SFF native interface
> -#
> -# CONFIG_SATA_AHCI_PLATFORM is not set
> -CONFIG_ATA_SFF=y
> -
> -#
> -# SFF controllers with custom DMA interface
> -#
> -CONFIG_ATA_BMDMA=y
> -
> -#
> -# SATA SFF controllers with BMDMA
> -#
> -# CONFIG_SATA_MV is not set
> -
> -#
> -# PATA SFF controllers with BMDMA
> -#
> -
> -#
> -# PIO-only SFF controllers
> -#
> -# CONFIG_PATA_PLATFORM is not set
> -
> -#
> -# Generic fallback / legacy drivers
> -#
> -CONFIG_PATA_TS72XX=y
> -CONFIG_PATA_TS7200_CF=m
> -CONFIG_PATA_TS9600=m
> -# CONFIG_MD is not set
> -CONFIG_NETDEVICES=y
> -# CONFIG_DUMMY is not set
> -# CONFIG_BONDING is not set
> -# CONFIG_MACVLAN is not set
> -# CONFIG_EQUALIZER is not set
> -# CONFIG_TUN is not set
> -# CONFIG_VETH is not set
> -CONFIG_PHYLIB=y
> -
> -#
> -# MII PHY device drivers
> -#
> -# CONFIG_MARVELL_PHY is not set
> -# CONFIG_DAVICOM_PHY is not set
> -# CONFIG_QSEMI_PHY is not set
> -# CONFIG_LXT_PHY is not set
> -# CONFIG_CICADA_PHY is not set
> -# CONFIG_VITESSE_PHY is not set
> -# CONFIG_SMSC_PHY is not set
> -# CONFIG_BROADCOM_PHY is not set
> -# CONFIG_ICPLUS_PHY is not set
> -# CONFIG_REALTEK_PHY is not set
> -# CONFIG_NATIONAL_PHY is not set
> -# CONFIG_STE10XP is not set
> -# CONFIG_LSI_ET1011C_PHY is not set
> -# CONFIG_MICREL_PHY is not set
> -# CONFIG_FIXED_PHY is not set
> -# CONFIG_MDIO_BITBANG is not set
> -CONFIG_NET_ETHERNET=y
> -CONFIG_MII=y
> -CONFIG_EP93XX_ETH=y
> -CONFIG_AX88796=m
> -CONFIG_AX88796_93CX6=y
> -CONFIG_AX88796_TS_ETH100=m
> -# CONFIG_SMC91X is not set
> -# CONFIG_DM9000 is not set
> -# CONFIG_ENC28J60 is not set
> -CONFIG_ETHOC=m
> -# CONFIG_SMC911X is not set
> -# CONFIG_SMSC911X is not set
> -# CONFIG_DNET is not set
> -# CONFIG_IBM_NEW_EMAC_ZMII is not set
> -# CONFIG_IBM_NEW_EMAC_RGMII is not set
> -# CONFIG_IBM_NEW_EMAC_TAH is not set
> -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> -# CONFIG_B44 is not set
> -# CONFIG_KS8851 is not set
> -# CONFIG_KS8851_MLL is not set
> -# CONFIG_NETDEV_1000 is not set
> -# CONFIG_NETDEV_10000 is not set
> -CONFIG_WLAN=y
> -CONFIG_LIBERTAS_THINFIRM=m
> -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set
> -CONFIG_LIBERTAS_THINFIRM_USB=m
> -CONFIG_AT76C50X_USB=m
> -CONFIG_USB_ZD1201=m
> -CONFIG_USB_NET_RNDIS_WLAN=m
> -CONFIG_RTL8187=m
> -CONFIG_RTL8187_LEDS=y
> -CONFIG_MAC80211_HWSIM=m
> -CONFIG_ATH_COMMON=m
> -# CONFIG_ATH_DEBUG is not set
> -CONFIG_ATH9K_HW=m
> -CONFIG_ATH9K_COMMON=m
> -CONFIG_ATH9K_HTC=m
> -CONFIG_AR9170_USB=m
> -CONFIG_AR9170_LEDS=y
> -CONFIG_B43=m
> -# CONFIG_B43_SDIO is not set
> -CONFIG_B43_PIO=y
> -CONFIG_B43_PHY_LP=y
> -CONFIG_B43_LEDS=y
> -CONFIG_B43_HWRNG=y
> -# CONFIG_B43_DEBUG is not set
> -CONFIG_B43LEGACY=m
> -CONFIG_B43LEGACY_LEDS=y
> -CONFIG_B43LEGACY_HWRNG=y
> -CONFIG_B43LEGACY_DEBUG=y
> -CONFIG_B43LEGACY_DMA=y
> -CONFIG_B43LEGACY_PIO=y
> -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
> -# CONFIG_B43LEGACY_DMA_MODE is not set
> -# CONFIG_B43LEGACY_PIO_MODE is not set
> -CONFIG_HOSTAP=m
> -# CONFIG_HOSTAP_FIRMWARE is not set
> -# CONFIG_IWM is not set
> -CONFIG_LIBERTAS=m
> -CONFIG_LIBERTAS_USB=m
> -# CONFIG_LIBERTAS_SDIO is not set
> -# CONFIG_LIBERTAS_SPI is not set
> -# CONFIG_LIBERTAS_DEBUG is not set
> -# CONFIG_LIBERTAS_MESH is not set
> -CONFIG_P54_COMMON=m
> -CONFIG_P54_USB=m
> -# CONFIG_P54_SPI is not set
> -CONFIG_P54_LEDS=y
> -CONFIG_RT2X00=m
> -CONFIG_RT2500USB=m
> -CONFIG_RT73USB=m
> -CONFIG_RT2800USB=m
> -# CONFIG_RT2800USB_RT30XX is not set
> -# CONFIG_RT2800USB_RT35XX is not set
> -# CONFIG_RT2800USB_UNKNOWN is not set
> -CONFIG_RT2800_LIB=m
> -CONFIG_RT2X00_LIB_USB=m
> -CONFIG_RT2X00_LIB=m
> -CONFIG_RT2X00_LIB_HT=y
> -CONFIG_RT2X00_LIB_FIRMWARE=y
> -CONFIG_RT2X00_LIB_CRYPTO=y
> -CONFIG_RT2X00_LIB_LEDS=y
> -# CONFIG_RT2X00_DEBUG is not set
> -CONFIG_WL12XX=m
> -# CONFIG_WL1251 is not set
> -# CONFIG_WL1271 is not set
> -CONFIG_ZD1211RW=m
> -# CONFIG_ZD1211RW_DEBUG is not set
> -
> -#
> -# Enable WiMAX (Networking options) to see the WiMAX drivers
> -#
> -
> -#
> -# USB Network Adapters
> -#
> -CONFIG_USB_CATC=m
> -CONFIG_USB_KAWETH=m
> -CONFIG_USB_PEGASUS=m
> -CONFIG_USB_RTL8150=m
> -CONFIG_USB_USBNET=m
> -CONFIG_USB_NET_AX8817X=m
> -CONFIG_USB_NET_CDCETHER=m
> -CONFIG_USB_NET_CDC_EEM=m
> -CONFIG_USB_NET_DM9601=m
> -CONFIG_USB_NET_SMSC75XX=m
> -CONFIG_USB_NET_SMSC95XX=m
> -CONFIG_USB_NET_GL620A=m
> -CONFIG_USB_NET_NET1080=m
> -CONFIG_USB_NET_PLUSB=m
> -CONFIG_USB_NET_MCS7830=m
> -CONFIG_USB_NET_RNDIS_HOST=m
> -CONFIG_USB_NET_CDC_SUBSET=m
> -CONFIG_USB_ALI_M5632=y
> -CONFIG_USB_AN2720=y
> -CONFIG_USB_BELKIN=y
> -CONFIG_USB_ARMLINUX=y
> -CONFIG_USB_EPSON2888=y
> -CONFIG_USB_KC2190=y
> -CONFIG_USB_NET_ZAURUS=m
> -CONFIG_USB_NET_INT51X1=m
> -CONFIG_USB_IPHETH=m
> -CONFIG_USB_SIERRA_NET=m
> -# CONFIG_WAN is not set
> -
> -#
> -# CAIF transport drivers
> -#
> -CONFIG_PPP=m
> -CONFIG_PPP_MULTILINK=y
> -CONFIG_PPP_FILTER=y
> -CONFIG_PPP_ASYNC=m
> -CONFIG_PPP_SYNC_TTY=m
> -CONFIG_PPP_DEFLATE=m
> -CONFIG_PPP_BSDCOMP=m
> -CONFIG_PPP_MPPE=m
> -CONFIG_PPPOE=m
> -# CONFIG_SLIP is not set
> -CONFIG_SLHC=m
> -# CONFIG_NETCONSOLE is not set
> -# CONFIG_NETPOLL is not set
> -# CONFIG_NET_POLL_CONTROLLER is not set
> -# CONFIG_ISDN is not set
> -# CONFIG_PHONE is not set
> -
> -#
> -# Input device support
> -#
> -CONFIG_INPUT=y
> -CONFIG_INPUT_FF_MEMLESS=m
> -CONFIG_INPUT_POLLDEV=m
> -# CONFIG_INPUT_SPARSEKMAP is not set
> -
> -#
> -# Userland interfaces
> -#
> -CONFIG_INPUT_MOUSEDEV=m
> -CONFIG_INPUT_MOUSEDEV_PSAUX=y
> -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> -# CONFIG_INPUT_JOYDEV is not set
> -CONFIG_INPUT_EVDEV=m
> -# CONFIG_INPUT_EVBUG is not set
> -
> -#
> -# Input Device Drivers
> -#
> -CONFIG_INPUT_KEYBOARD=y
> -# CONFIG_KEYBOARD_ADP5588 is not set
> -CONFIG_KEYBOARD_ATKBD=y
> -# CONFIG_KEYBOARD_QT2160 is not set
> -# CONFIG_KEYBOARD_LKKBD is not set
> -CONFIG_KEYBOARD_EP93XX=m
> -CONFIG_KEYBOARD_GPIO=m
> -# CONFIG_KEYBOARD_TCA6416 is not set
> -CONFIG_KEYBOARD_MATRIX=m
> -CONFIG_TS72XX_DIO_3X4_KEYPAD=m
> -CONFIG_TS72XX_DIO_4X4_KEYPAD=m
> -# CONFIG_KEYBOARD_LM8323 is not set
> -# CONFIG_KEYBOARD_MAX7359 is not set
> -# CONFIG_KEYBOARD_MCS is not set
> -# CONFIG_KEYBOARD_NEWTON is not set
> -# CONFIG_KEYBOARD_OPENCORES is not set
> -# CONFIG_KEYBOARD_STOWAWAY is not set
> -# CONFIG_KEYBOARD_SUNKBD is not set
> -# CONFIG_KEYBOARD_XTKBD is not set
> -CONFIG_INPUT_MOUSE=y
> -CONFIG_MOUSE_PS2=m
> -CONFIG_MOUSE_PS2_ALPS=y
> -CONFIG_MOUSE_PS2_LOGIPS2PP=y
> -CONFIG_MOUSE_PS2_SYNAPTICS=y
> -CONFIG_MOUSE_PS2_TRACKPOINT=y
> -# CONFIG_MOUSE_PS2_ELANTECH is not set
> -# CONFIG_MOUSE_PS2_SENTELIC is not set
> -# CONFIG_MOUSE_PS2_TOUCHKIT is not set
> -CONFIG_MOUSE_SERIAL=m
> -# CONFIG_MOUSE_APPLETOUCH is not set
> -# CONFIG_MOUSE_BCM5974 is not set
> -# CONFIG_MOUSE_VSXXXAA is not set
> -# CONFIG_MOUSE_GPIO is not set
> -# CONFIG_MOUSE_SYNAPTICS_I2C is not set
> -# CONFIG_INPUT_JOYSTICK is not set
> -# CONFIG_INPUT_TABLET is not set
> -# CONFIG_INPUT_TOUCHSCREEN is not set
> -CONFIG_INPUT_MISC=y
> -# CONFIG_INPUT_AD714X is not set
> -# CONFIG_INPUT_ATI_REMOTE is not set
> -# CONFIG_INPUT_ATI_REMOTE2 is not set
> -# CONFIG_INPUT_KEYSPAN_REMOTE is not set
> -# CONFIG_INPUT_POWERMATE is not set
> -# CONFIG_INPUT_YEALINK is not set
> -# CONFIG_INPUT_CM109 is not set
> -CONFIG_INPUT_UINPUT=m
> -# CONFIG_INPUT_PCF8574 is not set
> -# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
> -# CONFIG_INPUT_ADXL34X is not set
> -
> -#
> -# Hardware I/O ports
> -#
> -CONFIG_SERIO=y
> -# CONFIG_SERIO_SERPORT is not set
> -# CONFIG_SERIO_AMBAKMI is not set
> -CONFIG_SERIO_LIBPS2=y
> -# CONFIG_SERIO_RAW is not set
> -# CONFIG_SERIO_ALTERA_PS2 is not set
> -# CONFIG_GAMEPORT is not set
> -
> -#
> -# Character devices
> -#
> -CONFIG_VT=y
> -CONFIG_CONSOLE_TRANSLATIONS=y
> -CONFIG_VT_CONSOLE=y
> -CONFIG_HW_CONSOLE=y
> -CONFIG_VT_HW_CONSOLE_BINDING=y
> -# CONFIG_DEVKMEM is not set
> -# CONFIG_SERIAL_NONSTANDARD is not set
> -# CONFIG_N_GSM is not set
> -
> -#
> -# Serial drivers
> -#
> -CONFIG_SERIAL_8250=m
> -CONFIG_SERIAL_8250_NR_UARTS=4
> -CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> -# CONFIG_SERIAL_8250_EXTENDED is not set
> -CONFIG_SERIAL_8250_TS_SER1=m
> -CONFIG_SERIAL_8250_TS_SER1_IRQ=5
> -
> -#
> -# Non-8250 serial port support
> -#
> -CONFIG_SERIAL_AMBA_PL010=y
> -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
> -CONFIG_SERIAL_AMBA_PL010_TS72XX=y
> -# CONFIG_SERIAL_AMBA_PL011 is not set
> -# CONFIG_SERIAL_MAX3100 is not set
> -# CONFIG_SERIAL_MAX3107 is not set
> -CONFIG_SERIAL_CORE=y
> -CONFIG_SERIAL_CORE_CONSOLE=y
> -# CONFIG_SERIAL_TIMBERDALE is not set
> -# CONFIG_SERIAL_ALTERA_JTAGUART is not set
> -# CONFIG_SERIAL_ALTERA_UART is not set
> -CONFIG_UNIX98_PTYS=y
> -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> -# CONFIG_LEGACY_PTYS is not set
> -# CONFIG_IPMI_HANDLER is not set
> -CONFIG_HW_RANDOM=m
> -# CONFIG_HW_RANDOM_TIMERIOMEM is not set
> -# CONFIG_R3964 is not set
> -# CONFIG_RAW_DRIVER is not set
> -# CONFIG_TCG_TPM is not set
> -# CONFIG_RAMOOPS is not set
> -CONFIG_I2C=m
> -CONFIG_I2C_BOARDINFO=y
> -CONFIG_I2C_COMPAT=y
> -# CONFIG_I2C_CHARDEV is not set
> -# CONFIG_I2C_MUX is not set
> -CONFIG_I2C_HELPER_AUTO=y
> -CONFIG_I2C_ALGOBIT=m
> -
> -#
> -# I2C Hardware Bus support
> -#
> -
> -#
> -# I2C system bus drivers (mostly embedded / system-on-chip)
> -#
> -# CONFIG_I2C_DESIGNWARE is not set
> -CONFIG_I2C_GPIO=m
> -# CONFIG_I2C_OCORES is not set
> -# CONFIG_I2C_PCA_PLATFORM is not set
> -# CONFIG_I2C_SIMTEC is not set
> -# CONFIG_I2C_XILINX is not set
> -
> -#
> -# External I2C/SMBus adapter drivers
> -#
> -# CONFIG_I2C_PARPORT_LIGHT is not set
> -# CONFIG_I2C_TAOS_EVM is not set
> -# CONFIG_I2C_TINY_USB is not set
> -
> -#
> -# Other I2C/SMBus bus drivers
> -#
> -# CONFIG_I2C_STUB is not set
> -# CONFIG_I2C_DEBUG_CORE is not set
> -# CONFIG_I2C_DEBUG_ALGO is not set
> -# CONFIG_I2C_DEBUG_BUS is not set
> -CONFIG_SPI=y
> -CONFIG_SPI_MASTER=y
> -
> -#
> -# SPI Master Controller Drivers
> -#
> -CONFIG_SPI_BITBANG=m
> -# CONFIG_SPI_EP93XX is not set
> -CONFIG_SPI_GPIO=m
> -# CONFIG_SPI_PL022 is not set
> -# CONFIG_SPI_XILINX is not set
> -# CONFIG_SPI_DESIGNWARE is not set
> -
> -#
> -# SPI Protocol Masters
> -#
> -CONFIG_SPI_SPIDEV=m
> -# CONFIG_SPI_TLE62X0 is not set
> -# CONFIG_SPI_TMP124 is not set
> -
> -#
> -# PPS support
> -#
> -# CONFIG_PPS is not set
> -CONFIG_ARCH_REQUIRE_GPIOLIB=y
> -CONFIG_GPIOLIB=y
> -CONFIG_GPIO_SYSFS=y
> -
> -#
> -# Memory mapped GPIO expanders:
> -#
> -# CONFIG_GPIO_IT8761E is not set
> -# CONFIG_GPIO_PL061 is not set
> -
> -#
> -# I2C GPIO expanders:
> -#
> -# CONFIG_GPIO_MAX7300 is not set
> -# CONFIG_GPIO_MAX732X is not set
> -# CONFIG_GPIO_PCA953X is not set
> -# CONFIG_GPIO_PCF857X is not set
> -# CONFIG_GPIO_ADP5588 is not set
> -
> -#
> -# PCI GPIO expanders:
> -#
> -
> -#
> -# SPI GPIO expanders:
> -#
> -# CONFIG_GPIO_MAX7301 is not set
> -# CONFIG_GPIO_MCP23S08 is not set
> -# CONFIG_GPIO_MC33880 is not set
> -
> -#
> -# AC97 GPIO expanders:
> -#
> -
> -#
> -# MODULbus GPIO expanders:
> -#
> -# CONFIG_W1 is not set
> -# CONFIG_POWER_SUPPLY is not set
> -# CONFIG_HWMON is not set
> -# CONFIG_THERMAL is not set
> -CONFIG_WATCHDOG=y
> -# CONFIG_WATCHDOG_NOWAYOUT is not set
> -
> -#
> -# Watchdog Device Drivers
> -#
> -# CONFIG_SOFT_WATCHDOG is not set
> -# CONFIG_ARM_SP805_WATCHDOG is not set
> -CONFIG_EP93XX_WATCHDOG=m
> -CONFIG_TS72XX_WATCHDOG=y
> -# CONFIG_MAX63XX_WATCHDOG is not set
> -
> -#
> -# USB-based Watchdog Cards
> -#
> -# CONFIG_USBPCWATCHDOG is not set
> -CONFIG_SSB_POSSIBLE=y
> -
> -#
> -# Sonics Silicon Backplane
> -#
> -CONFIG_SSB=m
> -CONFIG_SSB_BLOCKIO=y
> -CONFIG_SSB_SDIOHOST_POSSIBLE=y
> -# CONFIG_SSB_SDIOHOST is not set
> -# CONFIG_SSB_SILENT is not set
> -# CONFIG_SSB_DEBUG is not set
> -CONFIG_MFD_SUPPORT=y
> -# CONFIG_MFD_CORE is not set
> -# CONFIG_MFD_SM501 is not set
> -# CONFIG_MFD_ASIC3 is not set
> -# CONFIG_HTC_EGPIO is not set
> -# CONFIG_HTC_PASIC3 is not set
> -# CONFIG_TPS65010 is not set
> -# CONFIG_TPS6507X is not set
> -# CONFIG_MFD_TMIO is not set
> -# CONFIG_MFD_T7L66XB is not set
> -# CONFIG_MFD_TC6387XB is not set
> -# CONFIG_MFD_TC6393XB is not set
> -# CONFIG_MFD_WM8400 is not set
> -# CONFIG_MFD_PCF50633 is not set
> -# CONFIG_MFD_MC13783 is not set
> -# CONFIG_ABX500_CORE is not set
> -# CONFIG_EZX_PCAP is not set
> -# CONFIG_AB8500_CORE is not set
> -# CONFIG_MFD_TPS6586X is not set
> -# CONFIG_REGULATOR is not set
> -# CONFIG_MEDIA_SUPPORT is not set
> -
> -#
> -# Graphics support
> -#
> -# CONFIG_DRM is not set
> -# CONFIG_VGASTATE is not set
> -# CONFIG_VIDEO_OUTPUT_CONTROL is not set
> -# CONFIG_FB is not set
> -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> -
> -#
> -# Display device support
> -#
> -# CONFIG_DISPLAY_SUPPORT is not set
> -
> -#
> -# Console display driver support
> -#
> -CONFIG_DUMMY_CONSOLE=y
> -# CONFIG_SOUND is not set
> -CONFIG_HID_SUPPORT=y
> -CONFIG_HID=y
> -# CONFIG_HIDRAW is not set
> -
> -#
> -# USB Input Devices
> -#
> -CONFIG_USB_HID=m
> -# CONFIG_HID_PID is not set
> -# CONFIG_USB_HIDDEV is not set
> -
> -#
> -# USB HID Boot Protocol drivers
> -#
> -# CONFIG_USB_KBD is not set
> -# CONFIG_USB_MOUSE is not set
> -
> -#
> -# Special HID drivers
> -#
> -# CONFIG_HID_3M_PCT is not set
> -# CONFIG_HID_A4TECH is not set
> -# CONFIG_HID_ACRUX_FF is not set
> -# CONFIG_HID_APPLE is not set
> -# CONFIG_HID_BELKIN is not set
> -# CONFIG_HID_CANDO is not set
> -# CONFIG_HID_CHERRY is not set
> -# CONFIG_HID_CHICONY is not set
> -# CONFIG_HID_CYPRESS is not set
> -# CONFIG_HID_DRAGONRISE is not set
> -# CONFIG_HID_EGALAX is not set
> -# CONFIG_HID_EZKEY is not set
> -# CONFIG_HID_KYE is not set
> -# CONFIG_HID_GYRATION is not set
> -# CONFIG_HID_TWINHAN is not set
> -# CONFIG_HID_KENSINGTON is not set
> -# CONFIG_HID_LOGITECH is not set
> -# CONFIG_HID_MICROSOFT is not set
> -# CONFIG_HID_MOSART is not set
> -# CONFIG_HID_MONTEREY is not set
> -# CONFIG_HID_NTRIG is not set
> -# CONFIG_HID_ORTEK is not set
> -# CONFIG_HID_PANTHERLORD is not set
> -# CONFIG_HID_PETALYNX is not set
> -# CONFIG_HID_PICOLCD is not set
> -# CONFIG_HID_QUANTA is not set
> -# CONFIG_HID_ROCCAT is not set
> -# CONFIG_HID_ROCCAT_KONE is not set
> -# CONFIG_HID_SAMSUNG is not set
> -# CONFIG_HID_SONY is not set
> -# CONFIG_HID_STANTUM is not set
> -# CONFIG_HID_SUNPLUS is not set
> -# CONFIG_HID_GREENASIA is not set
> -# CONFIG_HID_SMARTJOYPLUS is not set
> -# CONFIG_HID_TOPSEED is not set
> -# CONFIG_HID_THRUSTMASTER is not set
> -# CONFIG_HID_ZEROPLUS is not set
> -# CONFIG_HID_ZYDACRON is not set
> -CONFIG_USB_SUPPORT=y
> -CONFIG_USB_ARCH_HAS_HCD=y
> -CONFIG_USB_ARCH_HAS_OHCI=y
> -# CONFIG_USB_ARCH_HAS_EHCI is not set
> -CONFIG_USB=m
> -# CONFIG_USB_DEBUG is not set
> -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
> -
> -#
> -# Miscellaneous USB options
> -#
> -# CONFIG_USB_DEVICEFS is not set
> -CONFIG_USB_DEVICE_CLASS=y
> -# CONFIG_USB_DYNAMIC_MINORS is not set
> -# CONFIG_USB_OTG_WHITELIST is not set
> -# CONFIG_USB_OTG_BLACKLIST_HUB is not set
> -CONFIG_USB_MON=m
> -# CONFIG_USB_WUSB is not set
> -# CONFIG_USB_WUSB_CBAF is not set
> -
> -#
> -# USB Host Controller Drivers
> -#
> -# CONFIG_USB_C67X00_HCD is not set
> -# CONFIG_USB_OXU210HP_HCD is not set
> -# CONFIG_USB_ISP116X_HCD is not set
> -# CONFIG_USB_ISP1760_HCD is not set
> -# CONFIG_USB_ISP1362_HCD is not set
> -CONFIG_USB_OHCI_HCD=m
> -# CONFIG_USB_OHCI_HCD_SSB is not set
> -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> -CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> -# CONFIG_USB_SL811_HCD is not set
> -# CONFIG_USB_R8A66597_HCD is not set
> -# CONFIG_USB_HWA_HCD is not set
> -# CONFIG_USB_MUSB_HDRC is not set
> -
> -#
> -# USB Device Class drivers
> -#
> -CONFIG_USB_ACM=m
> -# CONFIG_USB_PRINTER is not set
> -# CONFIG_USB_WDM is not set
> -# CONFIG_USB_TMC is not set
> -
> -#
> -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> -#
> -
> -#
> -# also be needed; see USB_STORAGE Help for more info
> -#
> -CONFIG_USB_STORAGE=m
> -# CONFIG_USB_STORAGE_DEBUG is not set
> -# CONFIG_USB_STORAGE_DATAFAB is not set
> -# CONFIG_USB_STORAGE_FREECOM is not set
> -# CONFIG_USB_STORAGE_ISD200 is not set
> -# CONFIG_USB_STORAGE_USBAT is not set
> -# CONFIG_USB_STORAGE_SDDR09 is not set
> -# CONFIG_USB_STORAGE_SDDR55 is not set
> -# CONFIG_USB_STORAGE_JUMPSHOT is not set
> -# CONFIG_USB_STORAGE_ALAUDA is not set
> -# CONFIG_USB_STORAGE_ONETOUCH is not set
> -# CONFIG_USB_STORAGE_KARMA is not set
> -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> -# CONFIG_USB_LIBUSUAL is not set
> -
> -#
> -# USB Imaging devices
> -#
> -# CONFIG_USB_MDC800 is not set
> -# CONFIG_USB_MICROTEK is not set
> -
> -#
> -# USB port drivers
> -#
> -CONFIG_USB_SERIAL=m
> -# CONFIG_USB_EZUSB is not set
> -CONFIG_USB_SERIAL_GENERIC=y
> -# CONFIG_USB_SERIAL_AIRCABLE is not set
> -# CONFIG_USB_SERIAL_ARK3116 is not set
> -# CONFIG_USB_SERIAL_BELKIN is not set
> -# CONFIG_USB_SERIAL_CH341 is not set
> -# CONFIG_USB_SERIAL_WHITEHEAT is not set
> -# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
> -# CONFIG_USB_SERIAL_CP210X is not set
> -# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
> -# CONFIG_USB_SERIAL_EMPEG is not set
> -CONFIG_USB_SERIAL_FTDI_SIO=m
> -# CONFIG_USB_SERIAL_FUNSOFT is not set
> -# CONFIG_USB_SERIAL_VISOR is not set
> -# CONFIG_USB_SERIAL_IPAQ is not set
> -# CONFIG_USB_SERIAL_IR is not set
> -# CONFIG_USB_SERIAL_EDGEPORT is not set
> -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
> -# CONFIG_USB_SERIAL_GARMIN is not set
> -# CONFIG_USB_SERIAL_IPW is not set
> -# CONFIG_USB_SERIAL_IUU is not set
> -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
> -# CONFIG_USB_SERIAL_KEYSPAN is not set
> -# CONFIG_USB_SERIAL_KLSI is not set
> -# CONFIG_USB_SERIAL_KOBIL_SCT is not set
> -# CONFIG_USB_SERIAL_MCT_U232 is not set
> -# CONFIG_USB_SERIAL_MOS7720 is not set
> -# CONFIG_USB_SERIAL_MOS7840 is not set
> -# CONFIG_USB_SERIAL_MOTOROLA is not set
> -# CONFIG_USB_SERIAL_NAVMAN is not set
> -CONFIG_USB_SERIAL_PL2303=m
> -# CONFIG_USB_SERIAL_OTI6858 is not set
> -# CONFIG_USB_SERIAL_QCAUX is not set
> -# CONFIG_USB_SERIAL_QUALCOMM is not set
> -# CONFIG_USB_SERIAL_SPCP8X5 is not set
> -# CONFIG_USB_SERIAL_HP4X is not set
> -# CONFIG_USB_SERIAL_SAFE is not set
> -# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
> -# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
> -# CONFIG_USB_SERIAL_SYMBOL is not set
> -# CONFIG_USB_SERIAL_TI is not set
> -# CONFIG_USB_SERIAL_CYBERJACK is not set
> -# CONFIG_USB_SERIAL_XIRCOM is not set
> -CONFIG_USB_SERIAL_WWAN=m
> -CONFIG_USB_SERIAL_OPTION=m
> -# CONFIG_USB_SERIAL_OMNINET is not set
> -# CONFIG_USB_SERIAL_OPTICON is not set
> -# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
> -# CONFIG_USB_SERIAL_ZIO is not set
> -# CONFIG_USB_SERIAL_SSU100 is not set
> -# CONFIG_USB_SERIAL_DEBUG is not set
> -
> -#
> -# USB Miscellaneous drivers
> -#
> -# CONFIG_USB_EMI62 is not set
> -# CONFIG_USB_EMI26 is not set
> -# CONFIG_USB_ADUTUX is not set
> -# CONFIG_USB_SEVSEG is not set
> -# CONFIG_USB_RIO500 is not set
> -# CONFIG_USB_LEGOTOWER is not set
> -# CONFIG_USB_LCD is not set
> -# CONFIG_USB_LED is not set
> -# CONFIG_USB_CYPRESS_CY7C63 is not set
> -# CONFIG_USB_CYTHERM is not set
> -# CONFIG_USB_IDMOUSE is not set
> -# CONFIG_USB_FTDI_ELAN is not set
> -# CONFIG_USB_APPLEDISPLAY is not set
> -# CONFIG_USB_LD is not set
> -# CONFIG_USB_TRANCEVIBRATOR is not set
> -# CONFIG_USB_IOWARRIOR is not set
> -# CONFIG_USB_TEST is not set
> -# CONFIG_USB_ISIGHTFW is not set
> -CONFIG_USB_GADGET=m
> -# CONFIG_USB_GADGET_DEBUG_FILES is not set
> -CONFIG_USB_GADGET_VBUS_DRAW=2
> -CONFIG_USB_GADGET_SELECTED=y
> -CONFIG_USB_GADGET_R8A66597=y
> -CONFIG_USB_R8A66597=m
> -# CONFIG_USB_GADGET_M66592 is not set
> -# CONFIG_USB_GADGET_DUMMY_HCD is not set
> -CONFIG_USB_GADGET_DUALSPEED=y
> -# CONFIG_USB_ZERO is not set
> -CONFIG_USB_ETH=m
> -CONFIG_USB_ETH_RNDIS=y
> -CONFIG_USB_ETH_EEM=y
> -CONFIG_USB_GADGETFS=m
> -# CONFIG_USB_FUNCTIONFS is not set
> -CONFIG_USB_FILE_STORAGE=m
> -# CONFIG_USB_FILE_STORAGE_TEST is not set
> -CONFIG_USB_MASS_STORAGE=m
> -CONFIG_USB_G_SERIAL=m
> -CONFIG_USB_G_PRINTER=m
> -CONFIG_USB_CDC_COMPOSITE=m
> -CONFIG_USB_G_MULTI=m
> -CONFIG_USB_G_MULTI_RNDIS=y
> -CONFIG_USB_G_MULTI_CDC=y
> -# CONFIG_USB_G_HID is not set
> -# CONFIG_USB_G_DBGP is not set
> -
> -#
> -# OTG and related infrastructure
> -#
> -# CONFIG_USB_GPIO_VBUS is not set
> -# CONFIG_USB_ULPI is not set
> -# CONFIG_NOP_USB_XCEIV is not set
> -CONFIG_MMC=m
> -# CONFIG_MMC_DEBUG is not set
> -# CONFIG_MMC_UNSAFE_RESUME is not set
> -
> -#
> -# MMC/SD/SDIO Card Drivers
> -#
> -CONFIG_MMC_BLOCK=m
> -CONFIG_MMC_BLOCK_BOUNCE=y
> -CONFIG_SDIO_UART=m
> -# CONFIG_MMC_TEST is not set
> -
> -#
> -# MMC/SD/SDIO Host Controller Drivers
> -#
> -CONFIG_MMC_ARMMMCI=m
> -CONFIG_MMC_SDHCI=m
> -# CONFIG_MMC_SDHCI_PLTFM is not set
> -# CONFIG_MMC_SPI is not set
> -# CONFIG_MEMSTICK is not set
> -CONFIG_NEW_LEDS=y
> -CONFIG_LEDS_CLASS=y
> -
> -#
> -# LED drivers
> -#
> -# CONFIG_LEDS_PCA9532 is not set
> -CONFIG_LEDS_GPIO=y
> -CONFIG_LEDS_GPIO_PLATFORM=y
> -# CONFIG_LEDS_LP3944 is not set
> -# CONFIG_LEDS_PCA955X is not set
> -# CONFIG_LEDS_DAC124S085 is not set
> -# CONFIG_LEDS_BD2802 is not set
> -# CONFIG_LEDS_LT3593 is not set
> -CONFIG_LEDS_TRIGGERS=y
> -
> -#
> -# LED Triggers
> -#
> -CONFIG_LEDS_TRIGGER_TIMER=y
> -CONFIG_LEDS_TRIGGER_HEARTBEAT=y
> -CONFIG_LEDS_TRIGGER_BACKLIGHT=y
> -CONFIG_LEDS_TRIGGER_GPIO=y
> -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
> -
> -#
> -# iptables trigger is under Netfilter config (LED target)
> -#
> -# CONFIG_ACCESSIBILITY is not set
> -CONFIG_RTC_LIB=y
> -CONFIG_RTC_CLASS=m
> -
> -#
> -# RTC interfaces
> -#
> -CONFIG_RTC_INTF_SYSFS=y
> -CONFIG_RTC_INTF_PROC=y
> -CONFIG_RTC_INTF_DEV=y
> -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> -# CONFIG_RTC_DRV_TEST is not set
> -
> -#
> -# I2C RTC drivers
> -#
> -# CONFIG_RTC_DRV_DS1307 is not set
> -# CONFIG_RTC_DRV_DS1374 is not set
> -# CONFIG_RTC_DRV_DS1672 is not set
> -# CONFIG_RTC_DRV_DS3232 is not set
> -# CONFIG_RTC_DRV_MAX6900 is not set
> -# CONFIG_RTC_DRV_RS5C372 is not set
> -# CONFIG_RTC_DRV_ISL1208 is not set
> -# CONFIG_RTC_DRV_ISL12022 is not set
> -# CONFIG_RTC_DRV_X1205 is not set
> -# CONFIG_RTC_DRV_PCF8563 is not set
> -# CONFIG_RTC_DRV_PCF8583 is not set
> -# CONFIG_RTC_DRV_M41T80 is not set
> -# CONFIG_RTC_DRV_BQ32K is not set
> -# CONFIG_RTC_DRV_S35390A is not set
> -# CONFIG_RTC_DRV_FM3130 is not set
> -# CONFIG_RTC_DRV_RX8581 is not set
> -# CONFIG_RTC_DRV_RX8025 is not set
> -
> -#
> -# SPI RTC drivers
> -#
> -# CONFIG_RTC_DRV_M41T94 is not set
> -# CONFIG_RTC_DRV_DS1305 is not set
> -# CONFIG_RTC_DRV_DS1390 is not set
> -# CONFIG_RTC_DRV_MAX6902 is not set
> -# CONFIG_RTC_DRV_R9701 is not set
> -# CONFIG_RTC_DRV_RS5C348 is not set
> -# CONFIG_RTC_DRV_DS3234 is not set
> -# CONFIG_RTC_DRV_PCF2123 is not set
> -
> -#
> -# Platform RTC drivers
> -#
> -# CONFIG_RTC_DRV_CMOS is not set
> -# CONFIG_RTC_DRV_DS1286 is not set
> -# CONFIG_RTC_DRV_DS1511 is not set
> -# CONFIG_RTC_DRV_DS1553 is not set
> -# CONFIG_RTC_DRV_DS1742 is not set
> -# CONFIG_RTC_DRV_STK17TA8 is not set
> -CONFIG_RTC_DRV_M48T86=m
> -# CONFIG_RTC_DRV_M48T35 is not set
> -# CONFIG_RTC_DRV_M48T59 is not set
> -# CONFIG_RTC_DRV_MSM6242 is not set
> -# CONFIG_RTC_DRV_BQ4802 is not set
> -# CONFIG_RTC_DRV_RP5C01 is not set
> -# CONFIG_RTC_DRV_V3020 is not set
> -
> -#
> -# on-CPU RTC drivers
> -#
> -CONFIG_RTC_DRV_EP93XX=m
> -# CONFIG_RTC_DRV_PL030 is not set
> -# CONFIG_RTC_DRV_PL031 is not set
> -# CONFIG_DMADEVICES is not set
> -# CONFIG_AUXDISPLAY is not set
> -CONFIG_UIO=m
> -CONFIG_UIO_PDRV=m
> -CONFIG_UIO_PDRV_GENIRQ=m
> -# CONFIG_STAGING is not set
> -
> -#
> -# LCD support
> -#
> -CONFIG_LCD_LINUX=y
> -CONFIG_LCD_HD44780=y
> -
> -#
> -# File systems
> -#
> -CONFIG_EXT2_FS=m
> -# CONFIG_EXT2_FS_XATTR is not set
> -# CONFIG_EXT2_FS_XIP is not set
> -CONFIG_EXT3_FS=m
> -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> -CONFIG_EXT3_FS_XATTR=y
> -# CONFIG_EXT3_FS_POSIX_ACL is not set
> -# CONFIG_EXT3_FS_SECURITY is not set
> -CONFIG_EXT4_FS=m
> -# CONFIG_EXT4_FS_XATTR is not set
> -# CONFIG_EXT4_DEBUG is not set
> -CONFIG_JBD=m
> -CONFIG_JBD2=m
> -CONFIG_FS_MBCACHE=m
> -# CONFIG_REISERFS_FS is not set
> -# CONFIG_JFS_FS is not set
> -CONFIG_FS_POSIX_ACL=y
> -# CONFIG_XFS_FS is not set
> -# CONFIG_GFS2_FS is not set
> -# CONFIG_OCFS2_FS is not set
> -# CONFIG_BTRFS_FS is not set
> -# CONFIG_NILFS2_FS is not set
> -CONFIG_FILE_LOCKING=y
> -CONFIG_FSNOTIFY=y
> -CONFIG_DNOTIFY=y
> -CONFIG_INOTIFY_USER=y
> -# CONFIG_QUOTA is not set
> -# CONFIG_AUTOFS_FS is not set
> -CONFIG_AUTOFS4_FS=m
> -CONFIG_FUSE_FS=m
> -# CONFIG_CUSE is not set
> -CONFIG_GENERIC_ACL=y
> -
> -#
> -# Caches
> -#
> -# CONFIG_FSCACHE is not set
> -
> -#
> -# CD-ROM/DVD Filesystems
> -#
> -CONFIG_ISO9660_FS=m
> -CONFIG_JOLIET=y
> -CONFIG_ZISOFS=y
> -CONFIG_UDF_FS=m
> -CONFIG_UDF_NLS=y
> -
> -#
> -# DOS/FAT/NT Filesystems
> -#
> -CONFIG_FAT_FS=m
> -CONFIG_MSDOS_FS=m
> -CONFIG_VFAT_FS=m
> -CONFIG_FAT_DEFAULT_CODEPAGE=437
> -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> -CONFIG_NTFS_FS=m
> -# CONFIG_NTFS_DEBUG is not set
> -CONFIG_NTFS_RW=y
> -
> -#
> -# Pseudo filesystems
> -#
> -CONFIG_PROC_FS=y
> -CONFIG_PROC_SYSCTL=y
> -CONFIG_PROC_PAGE_MONITOR=y
> -CONFIG_SYSFS=y
> -CONFIG_TMPFS=y
> -CONFIG_TMPFS_POSIX_ACL=y
> -# CONFIG_HUGETLB_PAGE is not set
> -CONFIG_CONFIGFS_FS=m
> -CONFIG_MISC_FILESYSTEMS=y
> -# CONFIG_ADFS_FS is not set
> -# CONFIG_AFFS_FS is not set
> -# CONFIG_ECRYPT_FS is not set
> -# CONFIG_HFS_FS is not set
> -# CONFIG_HFSPLUS_FS is not set
> -# CONFIG_BEFS_FS is not set
> -# CONFIG_BFS_FS is not set
> -# CONFIG_EFS_FS is not set
> -CONFIG_JFFS2_FS=m
> -CONFIG_JFFS2_FS_DEBUG=0
> -CONFIG_JFFS2_FS_WRITEBUFFER=y
> -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> -# CONFIG_JFFS2_SUMMARY is not set
> -# CONFIG_JFFS2_FS_XATTR is not set
> -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> -CONFIG_JFFS2_ZLIB=y
> -# CONFIG_JFFS2_LZO is not set
> -CONFIG_JFFS2_RTIME=y
> -# CONFIG_JFFS2_RUBIN is not set
> -CONFIG_UBIFS_FS=y
> -CONFIG_UBIFS_FS_XATTR=y
> -CONFIG_UBIFS_FS_ADVANCED_COMPR=y
> -CONFIG_UBIFS_FS_LZO=y
> -CONFIG_UBIFS_FS_ZLIB=y
> -# CONFIG_UBIFS_FS_DEBUG is not set
> -# CONFIG_LOGFS is not set
> -# CONFIG_CRAMFS is not set
> -CONFIG_SQUASHFS=m
> -# CONFIG_SQUASHFS_XATTR is not set
> -# CONFIG_SQUASHFS_LZO is not set
> -# CONFIG_SQUASHFS_EMBEDDED is not set
> -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> -# CONFIG_VXFS_FS is not set
> -# CONFIG_MINIX_FS is not set
> -# CONFIG_OMFS_FS is not set
> -# CONFIG_HPFS_FS is not set
> -# CONFIG_QNX4FS_FS is not set
> -# CONFIG_ROMFS_FS is not set
> -# CONFIG_SYSV_FS is not set
> -# CONFIG_UFS_FS is not set
> -CONFIG_NETWORK_FILESYSTEMS=y
> -CONFIG_NFS_FS=y
> -# CONFIG_NFS_V3 is not set
> -CONFIG_NFS_V4=y
> -# CONFIG_NFS_V4_1 is not set
> -CONFIG_ROOT_NFS=y
> -# CONFIG_NFS_USE_LEGACY_DNS is not set
> -CONFIG_NFS_USE_KERNEL_DNS=y
> -CONFIG_NFSD=m
> -CONFIG_NFSD_V2_ACL=y
> -CONFIG_NFSD_V3=y
> -CONFIG_NFSD_V3_ACL=y
> -CONFIG_NFSD_V4=y
> -CONFIG_LOCKD=y
> -CONFIG_LOCKD_V4=y
> -CONFIG_EXPORTFS=m
> -CONFIG_NFS_ACL_SUPPORT=m
> -CONFIG_NFS_COMMON=y
> -CONFIG_SUNRPC=y
> -CONFIG_SUNRPC_GSS=y
> -CONFIG_RPCSEC_GSS_KRB5=y
> -# CONFIG_RPCSEC_GSS_SPKM3 is not set
> -# CONFIG_SMB_FS is not set
> -# CONFIG_CEPH_FS is not set
> -CONFIG_CIFS=m
> -# CONFIG_CIFS_STATS is not set
> -# CONFIG_CIFS_WEAK_PW_HASH is not set
> -CONFIG_CIFS_UPCALL=y
> -# CONFIG_CIFS_XATTR is not set
> -# CONFIG_CIFS_DEBUG2 is not set
> -# CONFIG_CIFS_DFS_UPCALL is not set
> -# CONFIG_CIFS_EXPERIMENTAL is not set
> -# CONFIG_NCP_FS is not set
> -# CONFIG_CODA_FS is not set
> -# CONFIG_AFS_FS is not set
> -
> -#
> -# Partition Types
> -#
> -# CONFIG_PARTITION_ADVANCED is not set
> -CONFIG_MSDOS_PARTITION=y
> -CONFIG_NLS=y
> -CONFIG_NLS_DEFAULT="iso8859-1"
> -CONFIG_NLS_CODEPAGE_437=m
> -CONFIG_NLS_CODEPAGE_737=m
> -CONFIG_NLS_CODEPAGE_775=m
> -CONFIG_NLS_CODEPAGE_850=m
> -CONFIG_NLS_CODEPAGE_852=m
> -CONFIG_NLS_CODEPAGE_855=m
> -CONFIG_NLS_CODEPAGE_857=m
> -CONFIG_NLS_CODEPAGE_860=m
> -CONFIG_NLS_CODEPAGE_861=m
> -CONFIG_NLS_CODEPAGE_862=m
> -CONFIG_NLS_CODEPAGE_863=m
> -CONFIG_NLS_CODEPAGE_864=m
> -CONFIG_NLS_CODEPAGE_865=m
> -CONFIG_NLS_CODEPAGE_866=m
> -CONFIG_NLS_CODEPAGE_869=m
> -CONFIG_NLS_CODEPAGE_936=m
> -CONFIG_NLS_CODEPAGE_950=m
> -CONFIG_NLS_CODEPAGE_932=m
> -CONFIG_NLS_CODEPAGE_949=m
> -CONFIG_NLS_CODEPAGE_874=m
> -CONFIG_NLS_ISO8859_8=m
> -CONFIG_NLS_CODEPAGE_1250=m
> -CONFIG_NLS_CODEPAGE_1251=m
> -CONFIG_NLS_ASCII=m
> -CONFIG_NLS_ISO8859_1=m
> -CONFIG_NLS_ISO8859_2=m
> -CONFIG_NLS_ISO8859_3=m
> -CONFIG_NLS_ISO8859_4=m
> -CONFIG_NLS_ISO8859_5=m
> -CONFIG_NLS_ISO8859_6=m
> -CONFIG_NLS_ISO8859_7=m
> -CONFIG_NLS_ISO8859_9=m
> -CONFIG_NLS_ISO8859_13=m
> -CONFIG_NLS_ISO8859_14=m
> -CONFIG_NLS_ISO8859_15=m
> -CONFIG_NLS_KOI8_R=m
> -CONFIG_NLS_KOI8_U=m
> -CONFIG_NLS_UTF8=m
> -# CONFIG_DLM is not set
> -
> -#
> -# Kernel hacking
> -#
> -CONFIG_PRINTK_TIME=y
> -# CONFIG_ENABLE_WARN_DEPRECATED is not set
> -# CONFIG_ENABLE_MUST_CHECK is not set
> -CONFIG_FRAME_WARN=2048
> -# CONFIG_MAGIC_SYSRQ is not set
> -# CONFIG_STRIP_ASM_SYMS is not set
> -# CONFIG_UNUSED_SYMBOLS is not set
> -# CONFIG_DEBUG_FS is not set
> -# CONFIG_HEADERS_CHECK is not set
> -# CONFIG_DEBUG_KERNEL is not set
> -# CONFIG_HARDLOCKUP_DETECTOR is not set
> -CONFIG_DEBUG_BUGVERBOSE=y
> -# CONFIG_DEBUG_MEMORY_INIT is not set
> -# CONFIG_RCU_CPU_STALL_DETECTOR is not set
> -CONFIG_SYSCTL_SYSCALL_CHECK=y
> -CONFIG_HAVE_FUNCTION_TRACER=y
> -CONFIG_TRACING_SUPPORT=y
> -# CONFIG_FTRACE is not set
> -# CONFIG_ATOMIC64_SELFTEST is not set
> -# CONFIG_SAMPLES is not set
> -CONFIG_HAVE_ARCH_KGDB=y
> -CONFIG_ARM_UNWIND=y
> -# CONFIG_DEBUG_USER is not set
> -# CONFIG_OC_ETM is not set
> -
> -#
> -# Security options
> -#
> -CONFIG_KEYS=y
> -# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
> -CONFIG_SECURITY=y
> -# CONFIG_SECURITYFS is not set
> -CONFIG_SECURITY_NETWORK=y
> -# CONFIG_SECURITY_NETWORK_XFRM is not set
> -# CONFIG_SECURITY_PATH is not set
> -# CONFIG_SECURITY_TOMOYO is not set
> -# CONFIG_SECURITY_APPARMOR is not set
> -# CONFIG_IMA is not set
> -CONFIG_DEFAULT_SECURITY_DAC=y
> -CONFIG_DEFAULT_SECURITY=""
> -CONFIG_CRYPTO=y
> -
> -#
> -# Crypto core or helper
> -#
> -# CONFIG_CRYPTO_FIPS is not set
> -CONFIG_CRYPTO_ALGAPI=y
> -CONFIG_CRYPTO_ALGAPI2=y
> -CONFIG_CRYPTO_AEAD=m
> -CONFIG_CRYPTO_AEAD2=y
> -CONFIG_CRYPTO_BLKCIPHER=y
> -CONFIG_CRYPTO_BLKCIPHER2=y
> -CONFIG_CRYPTO_HASH=y
> -CONFIG_CRYPTO_HASH2=y
> -CONFIG_CRYPTO_RNG=m
> -CONFIG_CRYPTO_RNG2=y
> -CONFIG_CRYPTO_PCOMP=m
> -CONFIG_CRYPTO_PCOMP2=y
> -CONFIG_CRYPTO_MANAGER=y
> -CONFIG_CRYPTO_MANAGER2=y
> -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
> -CONFIG_CRYPTO_GF128MUL=m
> -CONFIG_CRYPTO_NULL=m
> -CONFIG_CRYPTO_WORKQUEUE=y
> -CONFIG_CRYPTO_CRYPTD=m
> -CONFIG_CRYPTO_AUTHENC=m
> -CONFIG_CRYPTO_TEST=m
> -
> -#
> -# Authenticated Encryption with Associated Data
> -#
> -CONFIG_CRYPTO_CCM=m
> -CONFIG_CRYPTO_GCM=m
> -CONFIG_CRYPTO_SEQIV=m
> -
> -#
> -# Block modes
> -#
> -CONFIG_CRYPTO_CBC=y
> -CONFIG_CRYPTO_CTR=m
> -CONFIG_CRYPTO_CTS=m
> -CONFIG_CRYPTO_ECB=m
> -CONFIG_CRYPTO_LRW=m
> -CONFIG_CRYPTO_PCBC=m
> -CONFIG_CRYPTO_XTS=m
> -
> -#
> -# Hash modes
> -#
> -CONFIG_CRYPTO_HMAC=m
> -CONFIG_CRYPTO_XCBC=m
> -CONFIG_CRYPTO_VMAC=m
> -
> -#
> -# Digest
> -#
> -CONFIG_CRYPTO_CRC32C=m
> -CONFIG_CRYPTO_GHASH=m
> -CONFIG_CRYPTO_MD4=m
> -CONFIG_CRYPTO_MD5=y
> -CONFIG_CRYPTO_MICHAEL_MIC=m
> -CONFIG_CRYPTO_RMD128=m
> -CONFIG_CRYPTO_RMD160=m
> -CONFIG_CRYPTO_RMD256=m
> -CONFIG_CRYPTO_RMD320=m
> -CONFIG_CRYPTO_SHA1=m
> -CONFIG_CRYPTO_SHA256=m
> -CONFIG_CRYPTO_SHA512=m
> -CONFIG_CRYPTO_TGR192=m
> -CONFIG_CRYPTO_WP512=m
> -
> -#
> -# Ciphers
> -#
> -CONFIG_CRYPTO_AES=m
> -CONFIG_CRYPTO_ANUBIS=m
> -CONFIG_CRYPTO_ARC4=m
> -CONFIG_CRYPTO_BLOWFISH=m
> -CONFIG_CRYPTO_CAMELLIA=m
> -CONFIG_CRYPTO_CAST5=m
> -CONFIG_CRYPTO_CAST6=m
> -CONFIG_CRYPTO_DES=y
> -CONFIG_CRYPTO_FCRYPT=m
> -CONFIG_CRYPTO_KHAZAD=m
> -CONFIG_CRYPTO_SALSA20=m
> -CONFIG_CRYPTO_SEED=m
> -CONFIG_CRYPTO_SERPENT=m
> -CONFIG_CRYPTO_TEA=m
> -CONFIG_CRYPTO_TWOFISH=m
> -CONFIG_CRYPTO_TWOFISH_COMMON=m
> -
> -#
> -# Compression
> -#
> -CONFIG_CRYPTO_DEFLATE=y
> -CONFIG_CRYPTO_ZLIB=m
> -CONFIG_CRYPTO_LZO=y
> -
> -#
> -# Random Number Generation
> -#
> -CONFIG_CRYPTO_ANSI_CPRNG=m
> -# CONFIG_CRYPTO_HW is not set
> -# CONFIG_BINARY_PRINTF is not set
> -
> -#
> -# Library routines
> -#
> -CONFIG_BITREVERSE=y
> -CONFIG_GENERIC_FIND_LAST_BIT=y
> -CONFIG_CRC_CCITT=m
> -CONFIG_CRC16=y
> -CONFIG_CRC_T10DIF=m
> -CONFIG_CRC_ITU_T=m
> -CONFIG_CRC32=y
> -CONFIG_CRC7=m
> -CONFIG_LIBCRC32C=m
> -CONFIG_ZLIB_INFLATE=y
> -CONFIG_ZLIB_DEFLATE=y
> -CONFIG_LZO_COMPRESS=y
> -CONFIG_LZO_DECOMPRESS=y
> -CONFIG_TEXTSEARCH=y
> -CONFIG_TEXTSEARCH_KMP=m
> -CONFIG_TEXTSEARCH_BM=m
> -CONFIG_TEXTSEARCH_FSM=m
> -CONFIG_HAS_IOMEM=y
> -CONFIG_HAS_IOPORT=y
> -CONFIG_HAS_DMA=y
> -CONFIG_NLATTR=y
> -CONFIG_GENERIC_ATOMIC64=y
> diff --git a/recipes/linux/linux_2.6.36.bb b/recipes/linux/linux_2.6.36.bb
> index 10692b9..aea17dd 100644
> --- a/recipes/linux/linux_2.6.36.bb
> +++ b/recipes/linux/linux_2.6.36.bb
> @@ -5,7 +5,6 @@ PR = "r2"
> # Mark archs/machines that this kernel supports
> DEFAULT_PREFERENCE = "-1"
> DEFAULT_PREFERENCE_mx31ads = "1"
> -DEFAULT_PREFERENCE_ts72xx = "1"
>
> SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/${P}.tar.bz2;name=kernel \
> ${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/patch-${PV}.1.bz2;apply=yes;name=stablepatch \
> @@ -13,30 +12,6 @@ SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/${P}.tar.bz2;name=kernel \
>
> SRC_URI_append_mx31ads = "file://0001-add-missing-include.patch"
>
> -SRC_URI_append_ts72xx = " \
> - file://0001-ts72xx_base.patch \
> - file://0002-ts72xx_force_machine-id.patch \
> - file://0003-ep93xx_cpuinfo.patch \
> - file://0004-ep93xx_eth.patch \
> - file://0005-ep93xx-m2m-DMA-support.patch \
> - file://0006-ts72xx_rs485.patch \
> - file://0007-ts72xx_ts_ser1.patch \
> - file://0008-ts72xx_ts_eth100.patch \
> - file://0009-ts72xx_pata.patch \
> - file://0010-ts72xx_gpio_i2c.patch \
> - file://0011-ts72xx_dio_keypad.patch \
> - file://0012-ts72xx_sbcinfo.patch \
> - file://0013-ts72xx_max197.patch \
> - file://0014-ts7200_nor_flash.patch \
> - file://0015-ts72xx_sdcard.patch \
> - file://0016-ts72xx_spi_tmp124.patch \
> - file://0017-ts72xx-use-CPLD-watchdog-for-reset.patch \
> - file://0018-ethoc-ts7300-fixes.patch \
> - file://0019-ts7300-add-ethernet-support.patch \
> - file://0023-ts72xx-add-lcd-linux-driver.patch \
> - file://0024-ts72xx-add-GPIO-keys.patch \
> - "
> -
> SRC_URI[kernel.md5sum] = "61f3739a73afb6914cb007f37fb09b62"
> SRC_URI[kernel.sha256sum] = "15a076d1a435a6bf8e92834eba4b390b4ec094ce06d47f89d071ca9e5788ce04"
> SRC_URI[stablepatch.md5sum] = "dd38a6caf08df2822f93541ee95aed7d"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFNl0niMkyGM64RGpERAlM4AJ44b/PdxftNHT4jm/ofdbd4FFHM0gCffqem
D+lK+yUDwdr56dSv3Ebu89w=
=VQig
-----END PGP SIGNATURE-----
More information about the Openembedded-devel
mailing list