[oe] [beagleboard] Unable to build Angstrom meta-toolchain

[Stefan Herbrechtsmeier]

Am 20.08.2011 11:55, schrieb fabian büttner:
> On 01:34 Sat 20 Aug     , Paul Menzel wrote:
>> Am Samstag, den 20.08.2011, 00:35 +0200 schrieb fabian büttner:
>>> On 15:05 Fri 19 Aug     , Khem Raj wrote:
>>>> On Fri, Aug 19, 2011 at 2:03 PM, fabian büttner<fabian-buettner at gmx.de>  wrote:
>> […]
>>
>>>>> I removed libstdc++-dev and I was able to build meta-toolchain.
>>>> OK now can you send me list of files you have in
>>>> packages-split dir in gcc-cross build tree do
>>>>
>>>> $ find
>>>>
>>>> and send the output please
>>> Could you be more specific, I am new here.
>> Adding a please would be nice next time.
>>
>>> Where do I find the packages-split dir?
>> In your build directory [1]. For example for `libroxml`.
>>
>>          $ ls angstrom-dev/work/armv7a-angstrom-linux-gnueabi/libroxml-2.1.0-r0/
>>          image           package         staging-pkg      temp
>>          libroxml-2.1.0  packages-split  sysroot-destdir
>>
>> If you have `INHERIT += "rm_work"` in you `local.conf` those directories
>> are removed after a successful build. So you should comment that line
>> out.
>>
>>
>> Thanks and good luck,
>>
>> Paul
>>
>>
>> [1] http://gumstix.org/software-development/open-embedded/161-openembedded-directory-layout.html
> Hi Paul,
>
> Thank you for your answer.
> Like you suggested I commented the INHERIT line in my config and did a
> bitbake -c clean gcc-cross. After that i tried building the
> meta-toolchain again, which failed, with the following error:
> [...]
> | cp: cannot stat
> `/home/fab/git/angstrom-setup-scripts/build/tmp-angstrom_2010_x/pkgdata/armv7a-angstrom-linux-gnueabi/runtime/libstdc++-dev':
> No such file or directory
> NOTE: package meta-toolchain-1.0-r0: task do_populate_sdk: Failed
> ERROR: Function 'do_populate_sdk' failed (see
> /home/fab/git/angstrom-setup-scripts/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/meta-toolchain-1.0-r0/temp/log.do_populate_sdk.23348
> for further information)
> ERROR: Task 14
> (/home/fab/git/angstrom-setup-scripts/sources/openembedded/recipes/meta/meta-toolchain.bb,
> do_populate_sdk) failed with exit code '1'
> ERROR:
> '/home/fab/git/angstrom-setup-scripts/sources/openembedded/recipes/meta/meta-toolchain.bb'
> failed
>
> The requested file list in packages-split
> work/armv7a-angstrom-linux-gnueabi/gcc-cross-4.5-r37.1+svnr170443/packages-split:
> ./libssp
> ./libssp/usr
> ./libssp/usr/lib
> ./libssp/usr/lib/libssp.so.0.0.0
> ./libssp/usr/lib/libssp.so.0
> ./libstdc++.shlibdeps
> ./libssp.shlibdeps
> ./libgcc-dev
> ./libgcc-dev/usr
> ./libgcc-dev/usr/lib
> ./libgcc-dev/usr/lib/libgcc_s.so
> ./libg2c
> ./libgfortran
> ./libstdc++
> ./libstdc++/usr
> ./libstdc++/usr/lib
> ./libstdc++/usr/lib/libstdc++.so.6.0.14
> ./libstdc++/usr/lib/libstdc++.so.6
> ./libgcc
> ./libgcc/lib
> ./libgcc/lib/libgcc_s.so.1
> ./libgcc.shlibdeps
>
Same error with gcc-cross-4.3.3-r24.2 for armv7a and armv5te

packages-split:
./libssp
./libssp/usr
./libssp/usr/lib
./libssp/usr/lib/libssp.so.0.0.0
./libssp/usr/lib/libssp.so.0
./libgfortran
./libgfortran/usr
./libgfortran/usr/lib
./libgfortran/usr/lib/libgfortran.so.3
./libgfortran/usr/lib/libgfortran.so.3.0.0
./libssp.shlibdeps
./libstdc++-dev
./libstdc++.shlibdeps
./libgfortran.shlibdeps
./libg2c
./libgcc-dev
./libgcc-dev/usr
./libgcc-dev/usr/lib
./libgcc-dev/usr/lib/libgcc_s.so
./libgcc.shlibdeps
./libstdc++
./libstdc++/usr
./libstdc++/usr/lib
./libstdc++/usr/lib/libstdc++.so.6.0.10
./libstdc++/usr/lib/libstdc++.so.6
./libgcc
./libgcc/lib
./libgcc/lib/libgcc_s.so.1

Regards,
     Stefan