[oe] Build failure for openjade in dev: `libtool: link: cannot find the library `=/usr/lib/libstdc++.la'`

[Philip Balister]

On 08/25/2011 02:05 AM, Paul Menzel wrote:
> Am Mittwoch, den 24.08.2011, 18:36 -0700 schrieb Philip Balister:
>> On 08/24/2011 12:49 PM, Henning Heinold wrote:
>>> On Wed, Aug 24, 2011 at 12:02:49PM -0700, Philip Balister wrote:
>>>> I am seeing this building openjade. As near as I can see, there
>>>> haven't been any changes to cause this. It does build in
>>>> release-2011.3-maintenance.
>>>>
>>>> Anyone have any clues?
>>>>
>>>> Philip
>>>> | + install-catalog --add /home/balister/oe/tmp/sysroots/x86_64-linux/etc/sgml/openjade-1.3.2.cat /home/balister/oe/tmp/sysroots/x86_64-linux/usr/share/sgml/openjade-1.3.2/catalog
>>>> | install-catalog: unable to write in /etc/sgml.
>>>
>>> hm maybee you need to traint install-catalog not to write at /etc/sgml
>>
>> It's beginning to look like bitbake master does not work with dev. Back
>> on 1.12.0 bitbake and things seem sane again.
>
> Well, it still fails for me. What build configuration do you use? I
> tested `angstrom-2010.x`, `minimal{,-uclibc}` for `MACHINE =
> "beagleboard"`. (Please always add that to the commit message.)
>
>          mkdir .libs
>          libtool: link: warning: library `/oe/build-minimal-eglibc/minimal-dev/sysroots/armv7a-oe-linux-gnueabi/usr/lib/libosp.la' was moved.
>          libtool: link: warning: library `/oe/build-minimal-eglibc/minimal-dev/sysroots/armv7a-oe-linux-gnueabi/usr/lib/libosp.la' was moved.
>          libtool: link: cannot find the library `=/usr/lib/libstdc++.la'
>          make[2]: *** [openjade] Error 1

I am building Angstrom 2010 for the usrp-e1xx (in overlay, but it should 
be very close to the overo).

Philip


>
>
>
> Thanks,
>
> Paul
>
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel