[oe] [PATCH 3/3] Add machine configuration for mycable's Jade Evaluation Board

[Yauhen Kharuzhy]

mycable's Jade Evaluation Board is evaluation kit for
Fujitsu MB86R01 'Jade' SoC.

1. http://www.fujitsu.com/emea/services/microelectronics/gdc/evalbds/jade-evalboard.html

Signed-off-by: Yauhen Kharuzhy <yauhen.kharuzhy at promwad.com>
---
 conf/machine/jade-sk-86r01.conf |   30 ++++++++++++++++++++++++++++++
 1 files changed, 30 insertions(+), 0 deletions(-)
 create mode 100644 conf/machine/jade-sk-86r01.conf

diff --git a/conf/machine/jade-sk-86r01.conf b/conf/machine/jade-sk-86r01.conf
new file mode 100644
index 0000000..2c40a68
--- /dev/null
+++ b/conf/machine/jade-sk-86r01.conf
@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@Name: mycable's Fujitsu SK-86R01 'Jade' Evaluation Board
+#@DESCRIPTION: Machine configuration for the Jade Evaluation Board
+
+TARGET_ARCH = "arm"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-jade"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-jade"
+PREFERRED_VERSION_linux-jade = "2.6.27"
+PREFERRED_PROVIDER_xserver = "xserver-kdrive"
+
+KERNEL_IMAGETYPE = "uImage"
+
+
+UBOOT_MACHINE = "jadeevalkit_config"
+UBOOT_ENTRYPOINT = 40008000
+
+#don't try to access tty1
+USE_VT = "0"
+
+MACHINE_FEATURES = "kernel26 alsa ext2 usbgadget screen touchscreen"
+EXTRA_IMAGEDEPENDS += "u-boot-jade"
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES ?= "jffs2"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+
+require conf/machine/include/tune-arm926ejs.inc
+
-- 
1.7.5.4