[oe] tslib Issue

[Khem Raj]

On (01/02/11 14:37), openembedded at rkmorris.us wrote:
> Hi,
> 
> I have successfully build and then run several OE images on my target hardware (h1940) - and have noticed an interesting oddity (bug?).
> 
> If I run the opie-image for example, everything works just great. However, if I run an X-based image (like, say x11-gpe-image) when the GUI starts up tslib calibration is run ... but then basically thrown away, as the driver for the touchscreen is set to evdev by default (and the touchscreen isn't calibrated / does not work right). If I manually build and install xf86-input-tslib, and then configure the input as tslib (not evdev) - once I restart gpe-dm it works as expected!

are you using X11 with evdev driver then tslib will not be used at all. You
have to use xinput-calibrator.
> 
> Is this supposed to be the case, or perhaps something not configured quite right in the builds?
> 
> Thanks!
> 
> ... Russell
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel