[oe] H1940 Boot Issues -> Executable Build Problems?

[Vasily Khoruzhick]

On Thursday 06 January 2011 18:14:08 Russell Morris wrote:
> Hi Vasily,
> 
> Absolutely! I'm very glad to hear that you have it working on an h1940. I
> think I'm likely the problem ... :-(.
> 
> The file is attached. Do you have any suggestions? If you don't mind, could
> you share your local.conf file for me to try also?
> 
> Thanks!!!

Here it is, however it's not for minimal distro, and machine is rx1950 (seems 
I lost one for rx1950, but I'm sure that it differs only in machine name)

What kernel do you use on your h1940? One built via OE?

Regards
Vasily

P.S. Your mailer inserts too much empty lines in message, could you fix it 
somehow please? :)
-------------- next part --------------
#
# OpenEmbedded local configuration file (sample)
#
# Please visit the Wiki at http://openembedded.org/ for more info.
#
#
# Be SURE to read this file in its entirety and the GettingStarted page on the
# wiki before proceeding.
#
# Once you have done that, remove the line at the end of this
# file and build away.
# 
# WARNING: lines starting with a space (' ') will result in parse failures.
# Remove '# ' from commented lines to activate them.
#
# NOTE: Do NOT use $HOME in your paths, BitBake does NOT expand ~ for you.  If you
# must have paths relative to your homedir use ${HOME} (note the {}'s there
# you MUST have them for the variable expansion to be done by BitBake).  Your
# paths should all be absolute paths (They should all start with a / after
# expansion.  Stuff like starting with ${HOME} or ${TOPDIR} is ok).

# Use this to specify where BitBake should place the downloaded sources into
DL_DIR = "/home/distfiles"

# Delete the line below. Then specify which .bb files to consider for
# your build. Typically this will be something like BBFILES = "/path/to/openembedded/recipes/*/*.bb"
BBFILES = "/home/anarsoul/work/openembedded/openembedded/recipes/*/*.bb"

# Use the BBMASK below to instruct BitBake to _NOT_ consider some .bb files
# This is a regulary expression, so be sure to get your parenthesis balanced.
BBMASK = ""

# Uncomment this if your host distribution has recent enough Linux
# Kernel header files.  Utilities we use to generate certain types of
# target filesystems need somewhat recent header files.
# ASSUME_PROVIDED += "linux-libc-headers-native"

# Uncomment this if you want to use a prebuilt toolchain. You will need to
# provide packages for toolchain and additional libraries yourself. You also
# have to set PATH in your environment to make sure BitBake finds additional binaries.
# ASSUME_PROVIDED += "virtual/${TARGET_PREFIX}gcc virtual/libc"

# Uncomment this if you are building Linux 2.4 Embedix kernels.
# i.e. openzaurus-sa-2.4.18 and openzaurus-pxa-2.4.18 - and don't forget
# to rename the binaries as instructed in the Wiki.
# Most users do not need this anymore thankfully!
# ASSUME_PROVIDED += "virtual/arm-linux-gcc-2.95"

# Select between multiple alternative providers, if more than one is eligible.
PREFERRED_PROVIDERS = "virtual/qte:qte virtual/libqpe:libqpe-opie"
PREFERRED_PROVIDERS += " virtual/libsdl:libsdl-x11"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-initial:gcc-cross-initial"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc-intermediate:gcc-cross-intermediate"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}gcc:gcc-cross"
PREFERRED_PROVIDERS += " virtual/${TARGET_PREFIX}g++:gcc-cross"
PREFERRED_VERSION_mupdf = "0.6"

# Uncomment this to specify where BitBake should create its temporary files.
# Note that a full build of everything in OpenEmbedded will take GigaBytes of hard
# disk space, so make sure to free enough space. The default TMPDIR is
# <build directory>/tmp
# Don't use symlinks in in the path to avoid problems
# TMPDIR = /usr/local/projects/oetmp

# Uncomment this to specify a machine to build for. See the conf directory
# for machines currently known to OpenEmbedded. This will automatically take care
# of TARGET_ARCH
MACHINE = "rx1950"

# Use this to specify the target architecture. Note that this is only
# needed when building for a machine not known to OpenEmbedded. Better use
# the MACHINE attribute (see above)
# TARGET_ARCH = "arm"

# Use this to specify the target operating system.  The default is "linux",
# for a normal linux system with glibc. Set this to "linux-uclibc" if you want
# to build a uclibc based system.
# Normally the DISTRO of your choosing will take care of this 
# TARGET_OS = "linux"
# TARGET_OS = "linux-uclibc"

# Uncomment this to select a distribution policy. See the conf directory
# for distributions currently known to OpenEmbedded.
# Although it no longer contain version number in the (file-)name
# openzaurus-unstable is a so called "versioned"  distro, i.e. they 
# explicitely select specific versions of various packages.
# Stay away from unversioned distros unless you really know what you are doing
DISTRO = "jlime-2010.1"

# So far, angstrom.conf sets ENABLE_BINARY_LOCALE_GENERATION
# to generate binary locale packages at build time using qemu-native and
# thereby guarantee i18n support on all devices. If your build breaks on 
# qemu-native consider disabling ENABLE_BINARY_LOCALE_GENERATION (note that
# this breaks i18n on devices with less than 128MB RAM) or installing
# a working third-party qemu (e.g. provided by your distribution) and
# adding qemu-native to ASSUME_PROVIDED. Caveat emptor, since third-party
# qemus lack patches needed to work with various OE targets.
# ENABLE_BINARY_LOCALE_GENERATION = "0"
# ASSUME_PROVIDED += "qemu-native"

# If ENABLE_BINARY_LOCALE_GENERATION is set to "1", you can limit locales
# generated to the list provided by GLIBC_GENERATE_LOCALES. This is huge
# time-savior for developmental builds. Format: list of locale.encoding pairs
# with spaces as separators.
GLIBC_GENERATE_LOCALES = "en_US.UTF-8 en_GB.UTF-8 ru_RU.UTF-8"

# Uncomment this to select a particular major kernel version if the MACHINE setting
# supports more than one major kernel version. Currently this is suported by the
# following MACHINE types: poodle, tosa and simpad.
# MACHINE_KERNEL_VERSION = "2.6"

# Uncomment one of these to build packages during the build process.
# This is done automatically if you set DISTRO (see above)
# INHERIT = "package_ipk"
# INHERIT = "package_tar"

#INHERIT += "rm_work"
INHERIT += "shr-mirrors"

# Add the required image file system types below. Valid are 
# jffs2, tar(.gz|bz2), cpio(.gz), cramfs, ext2(.gz), ext3(.gz)
# squashfs, squashfs-lzma
IMAGE_FSTYPES = "tar"

# Uncomment this if you want to keep the temporary rootfs
# diretory, this can be useful during development.
# (Note that this rootfs is NOT usuable as NFS export.)
# IMAGE_KEEPROOTFS = "1"

# Uncomment this to enable the use of ccache when building.  Due to
# the nature of our builds this is only helpful in cases when one
# is rebuilding a recipe or set of recipes, repeatedly.
# CCACHE = "${@bb.which(bb.data.getVar('PATH', d, 1), 'ccache') and 'ccache '}"

# Uncomment this to disable the parse cache (not recommended).
# CACHE = ""

# Uncomment this if you want BitBake to emit debugging output
# BBDEBUG = "yes"

# Use DEBUG_BUILD to build packages with DEBUG_OPTIMIZATION instead of
# FULL_OPTIMIZATION.
#
# DEBUG_BUILD = "1"

# If you want to have unstripped ready-to-debug binaries, set this to "no",
# although for debugging you can use automatically produced -dbg packages.
# If you need to have completely undebuggable builds, set this to "full",
# by default gnu.debuglink section is left in the binaries after stripping, so
# this might be useful if you want to have checksum-level binary consistency
# across successive builds.
# PACKAGE_STRIP = "no"

# Uncomment these to build a package such that you can use gprof to profile it.
# NOTE: This will only work with 'linux' targets, not
# 'linux-uclibc', as uClibc doesn't provide the necessary
# object files.  Also, don't build glibc itself with these
# flags, or it'll fail to build.
#
# PROFILE_OPTIMIZATION = "-pg"
# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
# LDFLAGS =+ "-pg"

# Uncomment this to enable parallel make.
# This allows make to spawn mutliple processes to take advantage of multiple 
# processors. Useful on SMP machines. This may break some packages - we're
# in the process of marking these so let us know if you find any.
PARALLEL_MAKE = "-j4"

# Uncomment to run multiple bitbake threads in parallel.
# Bitbake can do multiple jobs in parallel: Its a good idea make use of 
# all available resources: e.g. to download sources while some other
# piece of software is compiled.
# BB_NUMBER_THREADS = "2"

# Uncomment this if you want BitBake to emit the log if a build fails.
BBINCLUDELOGS = "yes"

# Specifies a location to search for pre-generated tarballs when fetching
# a cvs:// URI. Outcomment this, if you always want to pull directly from CVS.
#CVS_TARBALL_STASH = ""

# Uncomment this if you want to install shared libraries directly under their SONAME,
# rather than installing as the full version and symlinking to the SONAME.
# PACKAGE_SNAP_LIB_SYMLINKS = "1"