[oe] Bulding multiple U-Boot configs for one machine

[Maupin, Chase]

> -----Original Message-----
> From: openembedded-devel-bounces at lists.openembedded.org
> [mailto:openembedded-devel-bounces at lists.openembedded.org] On Behalf Of
> Tom Rini
> Sent: Monday, January 17, 2011 4:16 PM
> To: openembedded-devel at lists.openembedded.org
> Subject: Re: [oe] Bulding multiple U-Boot configs for one machine
> 
> On 01/17/2011 03:04 PM, Ulf Samuelsson wrote:
> > Managed to get some time over and checked in a recipe
> > for u-boot-2010.12 which builds all u-boot configs
> > specified in the UBOOT_MACHINES (note "S" at the end)
> >
> > The frecipe is available in a private branch:
> > "ulf/linux-2.6.30-2011-01-16" (or similar).
> >
> > There is a SAM9M10 machine checked in as well as a test case.
> > grep for UBOOT_MACHINES in the conf/machine directory to find out which.
> >
> > Note that
> > UBOOT_MACHINE = "at91sam9m10g45ek_config"
> >
> > but
> >
> > UBOOT_MACHINES = "at91sam9m10g45ek_dataflash at91sam9m10g45ek_sd"
> >
> > I.E: No "_config" in the list.
> >
> > The goal of the new branch is to test booting from an SD-Card
> > without any other flash in the system.
> > Have tested this outside openembedded so far, but
> > the current branch is still to be tested on a board.
> 
> I can see a number of other use cases for this type of functionality so
> +1 on the concept from me.

Agreed.  Would love to see a patch for this because the concept is good.

> 
> --
> Tom Rini
> Mentor Graphics Corporation
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel