[oe] native-sdk-image do_rootfs() fails

[Víctor M. Jáquez L.]

On Thu, Jan 20, 2011 at 07:04:05PM +0300, Yury Bushmelev wrote:
> 2011/1/20 Víctor M. Jáquez L. <vjaquez at igalia.com>:
> > I'm trying to build a native-sdk-image for pandaboard, both with
> > angstrom-linux-gnueabi and external csl toolchains. Both builds failed in the
> > same point:
> >
> > | Configuring sysvinit.
> > | Collected errors:
> > |  * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-sdk-native:
> > |  *    virtual-libc-dev *
> > |  * opkg_install_cmd: Cannot install package task-sdk-native.
> > |  * resolve_conffiles: Existing conffile /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table is different from the conffile in the new package. The new conffile will be placed at /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table-opkg.
> > | ERROR: Function do_rootfs failed
> >
> > I don't know how to deal with this issue. Any advice?
> 
> I have built native-sdk-image twice (for qemuarm and for qemux86) this
> week w/o problems, but for minimal distro.

I'm trying to build an image for the pandaboard but I faced this same issue: 

http://comments.gmane.org/gmane.comp.handhelds.openembedded/4065

(the linux-omap4 kernel compilation broke because of "Error: selected
processor does not support ARM mode `smc #0'")

So I moved back the binutils version to 2.20.1

vmjl