[oe] [PATCH v3 08/08] Remove some patches, which was moved by previous linux patch
Ulf Samuelsson
ulf.samuelsson at atmel.com
Mon Jan 31 21:18:08 UTC 2011
Signed-off-by: Ulf Samuelsson <ulf.samuelsson at atmel.com>
---
....30-001-configurable-partition-size.patch.patch | 362 --------------------
.../at91/linux-2.6.30-002-mach-at91-Kconfig.patch | 196 -----------
.../at91/linux-2.6.30-003-sam9m10g45ek.patch | 29 --
3 files changed, 0 insertions(+), 587 deletions(-)
delete mode 100644 recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch
delete mode 100644 recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch
delete mode 100644 recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch
diff --git a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch
deleted file mode 100644
index ae24d12..0000000
--- a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-001-configurable-partition-size.patch.patch
+++ /dev/null
@@ -1,362 +0,0 @@
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-at572d940hf_ek.c linux-2.6.30/arch/arm/mach-at91/board-at572d940hf_ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-at572d940hf_ek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-at572d940hf_ek.c 2010-03-14 11:28:55.000000000 +0100
-@@ -114,10 +114,20 @@
- */
- static struct mtd_partition __initdata eb_nand_partition[] = {
- {
-- .name = "Partition 1",
-- .offset = 0,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
-+ },
-+ {
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
-+ .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
-- }
-+ },
- };
-
- static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-cap9adk.c linux-2.6.30/arch/arm/mach-at91/board-cap9adk.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-cap9adk.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-cap9adk.c 2010-03-14 11:28:36.000000000 +0100
-@@ -167,8 +167,18 @@
- */
- static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
- {
-- .name = "NAND partition",
-- .offset = 0,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
-+ },
-+ {
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
-+ .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
- };
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-dk.c linux-2.6.30/arch/arm/mach-at91/board-dk.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-dk.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-dk.c 2010-03-14 11:28:43.000000000 +0100
-@@ -314,8 +314,18 @@
-
- static struct mtd_partition __initdata dk_nand_partition[] = {
- {
-- .name = "NAND Partition 1",
-- .offset = 0,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
-+ },
-+ {
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
-+ .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
- };
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9260ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9260ek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9260ek.c 2010-03-14 11:26:57.000000000 +0100
-@@ -177,12 +177,17 @@
- */
- static struct mtd_partition __initdata ek_nand_partition[] = {
- {
-- .name = "Partition 1",
-- .offset = 0,
-- .size = SZ_256K,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9261ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9261ek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9261ek.c 2010-03-14 11:26:57.000000000 +0100
-@@ -184,12 +184,17 @@
- */
- static struct mtd_partition __initdata ek_nand_partition[] = {
- {
-- .name = "Partition 1",
-- .offset = 0,
-- .size = SZ_256K,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9263ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9263ek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9263ek.c 2010-03-14 11:26:57.000000000 +0100
-@@ -174,12 +174,17 @@
- */
- static struct mtd_partition __initdata ek_nand_partition[] = {
- {
-- .name = "Partition 1",
-- .offset = 0,
-- .size = SZ_64M,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c 2010-03-14 11:28:29.000000000 +0100
-@@ -130,12 +130,12 @@
- .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 1",
-+ .name = "Root File System",
- .offset = MTDPART_OFS_NXTBLK,
-- .size = 60 * SZ_1M,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9g20ek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9g20ek.c 2010-03-14 11:26:57.000000000 +0100
-@@ -129,12 +129,12 @@
- .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 1",
-+ .name = "Root File System",
- .offset = MTDPART_OFS_NXTBLK,
-- .size = 60 * SZ_1M,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 11:26:57.000000000 +0100
-@@ -133,12 +133,17 @@
- */
- static struct mtd_partition __initdata ek_nand_partition[] = {
- {
-- .name = "Partition 1",
-- .offset = 0,
-- .size = SZ_64M,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9rlek.c linux-2.6.30/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9rlek.c 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9rlek.c 2010-03-14 11:26:57.000000000 +0100
-@@ -83,12 +83,17 @@
- */
- static struct mtd_partition __initdata ek_nand_partition[] = {
- {
-- .name = "Partition 1",
-- .offset = 0,
-- .size = SZ_256K,
-+ .name = "Bootstrap",
-+ .offset = 0,
-+ .size = 4 * SZ_1M,
- },
- {
-- .name = "Partition 2",
-+ .name = "Root File System",
-+ .offset = MTDPART_OFS_NXTBLK,
-+ .size = CONFIG_MTD_NAND_ATMEL_ROOTFS_SIZE * SZ_1M,
-+ },
-+ {
-+ .name = "Data",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig linux-2.6.30/arch/arm/mach-at91/Kconfig
---- linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/Kconfig 2010-03-14 11:32:54.000000000 +0100
-@@ -96,6 +96,7 @@
- config ARCH_AT91RM9200DK
- bool "Atmel AT91RM9200-DK Development board"
- depends on ARCH_AT91RM9200
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-@@ -213,6 +214,7 @@
- config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- depends on ARCH_AT91SAM9260
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-@@ -278,6 +280,7 @@
- config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- depends on ARCH_AT91SAM9261
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-@@ -293,6 +296,7 @@
- config MACH_AT91SAM9G10EK
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- depends on ARCH_AT91SAM9G10
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-@@ -308,6 +312,7 @@
- config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- depends on ARCH_AT91SAM9263
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-@@ -350,6 +355,7 @@
- config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- depends on ARCH_AT91SAM9RL
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-@@ -364,6 +370,7 @@
- config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- depends on ARCH_AT91SAM9G20
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-@@ -371,6 +378,7 @@
- config MACH_AT91SAM9G20EK_2MMC
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- depends on ARCH_AT91SAM9G20
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
-@@ -408,6 +416,7 @@
- config MACH_AT91SAM9G45EKES
- bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
- depends on ARCH_AT91SAM9G45
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
-@@ -424,6 +433,7 @@
- config MACH_AT91SAM9M10EKES
- bool "Atmel AT91SAM9M10-EKES Evaluation Kit"
- depends on ARCH_AT91SAM9M10
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91SAM9M10-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
-@@ -440,6 +450,7 @@
- config MACH_AT91CAP9ADK
- bool "Atmel AT91CAP9A-DK Evaluation Kit"
- depends on ARCH_AT91CAP9
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-@@ -455,6 +466,7 @@
- config MACH_AT572D940HFEB
- bool "AT572D940HF-EK"
- depends on ARCH_AT572D940HF
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
- help
- Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
- <http://www.atmel.com/products/diopsis/default.asp>
-@@ -494,6 +506,24 @@
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
-+config MTD_NAND_ATMEL_ROOTFS_SIZE
-+ int "Size NAND rootfs in MB"
-+ range 8 250
-+ depends on MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ default "124"
-+ help
-+ Many Atmel development boards has a NAND Flash,
-+ divided into three partitions.
-+ 1) Boot partition (4 MB)
-+ 2) Root FS
-+ 3) Data partition
-+ This allows you to configure the size of the root fs
-+ with the remainder ending up in the data partition.
-+ The legal values are between 8 and 250
-+
-+config MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ bool
-+
- # ----------------------------------------------------------
-
- comment "AT91 Feature Selections"
diff --git a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch
deleted file mode 100644
index a2d3965..0000000
--- a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-002-mach-at91-Kconfig.patch
+++ /dev/null
@@ -1,196 +0,0 @@
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig linux-2.6.30/arch/arm/mach-at91/Kconfig
---- linux-2.6.30-0rig/arch/arm/mach-at91/Kconfig 2010-03-14 11:41:36.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/Kconfig 2010-03-14 12:00:27.000000000 +0100
-@@ -97,6 +97,7 @@
- bool "Atmel AT91RM9200-DK Development board"
- depends on ARCH_AT91RM9200
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91RM9200-DK Development board.
- (Discontinued)
-@@ -104,6 +105,7 @@
- config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- depends on ARCH_AT91RM9200
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-@@ -172,6 +174,7 @@
- config MACH_ECBAT91
- bool "emQbit ECB_AT91 SBC"
- depends on ARCH_AT91RM9200
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using emQbit's ECB_AT91 board.
- <http://wiki.emqbit.com/free-ecb-at91>
-@@ -215,6 +218,8 @@
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- depends on ARCH_AT91SAM9260
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-@@ -229,6 +234,7 @@
- config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- depends on ARCH_AT91SAM9260
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-@@ -281,6 +287,8 @@
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- depends on ARCH_AT91SAM9261
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-@@ -297,6 +305,8 @@
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- depends on ARCH_AT91SAM9G10
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-@@ -313,6 +323,8 @@
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- depends on ARCH_AT91SAM9263
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-@@ -334,6 +346,7 @@
- config MACH_TOTEMNOVA
- bool "TotemNova Micronova industrial supervisor"
- depends on ARCH_AT91SAM9263
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Micronova's TotemNova industrial supervisor
- <http://www.micronovasrl.com>
-@@ -341,6 +354,7 @@
- config MACH_NEOCORE926
- bool "Adeneo NEOCORE926"
- depends on ARCH_AT91SAM9263
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using the Adeneo Neocore 926 board.
-
-@@ -371,6 +385,8 @@
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- depends on ARCH_AT91SAM9G20
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-@@ -379,6 +395,7 @@
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- depends on ARCH_AT91SAM9G20
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
-@@ -417,13 +434,23 @@
- bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
- depends on ARCH_AT91SAM9G45
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
- help
- Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
- Engineering Sample.
-
--endif
-+config MACH_AT91SAM9M10G45EK
-+ bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
-+ depends on ARCH_AT91SAM9G45
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ help
-+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-+ "ES2" at the end of the name means that this board is an
-+ Engineering Sample.
-
-+endif
- # ----------------------------------------------------------
-
- if ARCH_AT91SAM9M10
-@@ -434,11 +461,22 @@
- bool "Atmel AT91SAM9M10-EKES Evaluation Kit"
- depends on ARCH_AT91SAM9M10
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
- help
- Select this if you are using Atmel's AT91SAM9M10-EKES Evaluation Kit.
- "ES" at the end of the name means that this board is an
- Engineering Sample.
-
-+config MACH_AT91SAM9M10G45EK
-+ bool "Atmel AT91SAM9M10G45-EK Evaluation Kit"
-+ depends on ARCH_AT91SAM9M10
-+ select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ help
-+ Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
-+ "ES2" at the end of the name means that this board is an
-+ Engineering Sample.
-+
- endif
-
- # ----------------------------------------------------------
-@@ -451,6 +489,8 @@
- bool "Atmel AT91CAP9A-DK Evaluation Kit"
- depends on ARCH_AT91CAP9
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-@@ -467,6 +507,8 @@
- bool "AT572D940HF-EK"
- depends on ARCH_AT572D940HF
- select MTD_NAND_ALLOW_CONFIGURABLE_ROOTFS_SIZE
-+ select MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ select MTD_ALLOW_DATAFLASHCARD
- help
- Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
- <http://www.atmel.com/products/diopsis/default.asp>
-@@ -495,17 +537,23 @@
-
- config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
-- depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_AT572D940HFEB || MACH_TOTEMNOVA || MACH_NEOCORE926)
-+ depends on MTD_ALLOW_DATAFLASHCARD
- help
- Enable support for the DataFlash card.
-
-+config MTD_ALLOW_DATAFLASHCARD
-+ bool
-+
- config MTD_NAND_ATMEL_BUSWIDTH_16
- bool "Enable 16-bit data bus interface to NAND flash"
-- depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK || MACH_AT572D940HFEB)
-+ depends on MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
- help
- On AT91SAM926x boards both types of NAND flash can be present
- (8 and 16 bit data bus width).
-
-+config MTD_NAND_ALLOW_CONFIGURABLE_NAND_BUSWIDTH
-+ bool
-+
- config MTD_NAND_ATMEL_ROOTFS_SIZE
- int "Size NAND rootfs in MB"
- range 8 250
diff --git a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch b/recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch
deleted file mode 100644
index 05a81bf..0000000
--- a/recipes/linux/linux-2.6.30/at91/linux-2.6.30-003-sam9m10g45ek.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c
---- linux-2.6.30-0rig/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 11:41:36.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/board-sam9m10g45ek.c 2010-03-14 12:07:05.000000000 +0100
-@@ -432,9 +432,13 @@
-
- #if defined(CONFIG_MACH_AT91SAM9G45EKES)
- MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
--#else
-+#endif
-+#if defined(CONFIG_MACH_AT91SAM9M10EKES)
- MACHINE_START(AT91SAM9M10EKES, "Atmel AT91SAM9M10-EKES")
- #endif
-+#if defined(CONFIG_MACH_AT91SAM9M10G45EK)
-+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
-+#endif
- /* Maintainer: Atmel */
- .phys_io = AT91_BASE_SYS,
- .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-diff -urN linux-2.6.30-0rig/arch/arm/mach-at91/Makefile linux-2.6.30/arch/arm/mach-at91/Makefile
---- linux-2.6.30-0rig/arch/arm/mach-at91/Makefile 2010-03-14 11:13:34.000000000 +0100
-+++ linux-2.6.30/arch/arm/mach-at91/Makefile 2010-03-14 12:08:01.000000000 +0100
-@@ -74,6 +74,7 @@
- # AT91SAM9G45 board-specific support
- obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
- obj-$(CONFIG_MACH_AT91SAM9M10EKES) += board-sam9m10g45ek.o
-+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
-
- # AT91CAP9 board-specific support
- obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
--
1.6.3.3
More information about the Openembedded-devel
mailing list