[oe] [beagleboard] [PATCH v3] beagleboard-test-scripts: Add a script flash-fs.sh for flashing NAND

[Khem Raj]

On Jul 7, 2011, at 5:32 PM, Jason Kridner <jkridner at beagleboard.org> wrote:

> On Thu, Jul 7, 2011 at 5:23 PM, Joel A Fernandes <agnel.joel at gmail.com> wrote:
>> This script flashes the NAND of a BeagleBoard if:
>>  * The user-button is pressed
>>  * There is a valid image on the SD Card to flash
>>  * The board has NAND
>> 
>> Signed-off-by: Joel A Fernandes <agnel.joel at gmail.com>
> 
> Acked-by: Jason Kridner <jkridner at beagleboard.org>
> 
>> ---
>> Changes since v2:
>>  User button is checked before flashing of the board
>> 
>> This is based on Jason's review:
>> http://groups.google.com/group/beagleboard/msg/835de9a37c3a340a
>> 
>>  .../beagleboard/beagleboard-test-scripts_git.bb    |   14 +++++++++++---
>>  1 files changed, 11 insertions(+), 3 deletions(-)
>> 
>> diff --git a/recipes/beagleboard/beagleboard-test-scripts_git.bb b/recipes/beagleboard/beagleboard-test-scripts_git.bb
>> index be0d059..3f3cc56 100644
>> --- a/recipes/beagleboard/beagleboard-test-scripts_git.bb
>> +++ b/recipes/beagleboard/beagleboard-test-scripts_git.bb
>> @@ -1,14 +1,18 @@
>>  ## Reminder:  The correct spacing for a variable is FOO = "BAR"  in : PR="r1"
>>  DESCRIPTION = "BeagleBoard test scripts"
>>  HOMEPAGE = "http://beagleboad.org/support"
>> -PR = "r2"
>> +PR = "r3"
>> 
>> -SRC_URI = "git://gitorious.org/beagleboard-validation/scripts.git;protocol=git \
>> +SRC_URI = "git://gitorious.org/~joelf/beagleboard-validation/validation-scripts.git;protocol=git \
>>  "
>> 
>> -SRCREV = "473dd2ab20d866be6168c9f992c2c9e74e485c9d"
>> +SRCREV = "513bfa2e99822150ea5845f3a33c349029cb7c13"
> 
> Thanks!
> 
>>  S = "${WORKDIR}/git"
>> 
>> +inherit update-rc.d
>> +INITSCRIPT_NAME = "flash-fs.sh"
>> +INITSCRIPT_PARAMS = "start 99 2 3 4 5 ."
>> +
>>  do_install() {
>>   TEST_FILES=" \
>>     testaudio \
>> @@ -28,4 +32,8 @@ do_install() {
>>   for i in ${TEST_FILES}; do
>>     install -m 0755 ${S}/${i} ${D}/${bindir}
>>   done
>> +  # A script to flash NAND if the board has it, and if there is valid image to flash on the SD Card.
>> +  # We also register it as an init script so that the SD Card auto-flashes to NAND during boot.
>> +  install -d ${D}/${sysconfdir}/init.d/
>> +  install -m 0755 ${S}/flashing/flash-fs.sh ${D}/${sysconfdir}/init.d/flash-fs.sh

Would it be better to call it flash-nand-fs.sh ? Or have NAND somewhere in it's name
>>  }
>> --
>> 1.7.0.4
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel