[oe] Kernel boot problems
Bernard Mentink
Bernard_Mentink at trimble.com
Fri Jul 29 01:41:42 UTC 2011
Hi Gary,
Did as you suggested .. no printout from serial_imx_probe() is seen, so
I guess it isn't been called, will have to trace it back to see why not.
This is going to be tedious ..
EDIT: However the function imx_serial_init() is being called and
completes without errors, so I don't know why the probe is not being
called ..
Any ideas?
Thanks,
bernie
------------------------------------------------------------------------
------------------
I want to die peacefully in my sleep, like my grandfather, not screaming
and yelling like the passengers in his car.
-----Original Message-----
From: Gary Thomas [mailto:gary at mlbassoc.com]
Sent: Friday, 29 July 2011 10:42 a.m.
To: Bernard Mentink
Cc: openembedded-devel at lists.openembedded.org
Subject: Re: [oe] Kernel boot problems
On 2011-07-28 16:10, Bernard Mentink wrote:
> Hi Gary,
>
> Further down I see a confirmation of the boot params ... i.e
> console=ttymxc0,115200
>
> 8030d600: 73747369 206e6920 656e6f5a 64726f20 ists in Zone ord
> 8030d610: 202c7265 69626f6d 7974696c 6f726720 er, mobility gro
> 8030d620: 6e697075 6e6f2067 5420202e 6c61746f uping on. Total
> 8030d630: 67617020 203a7365 31353233 353c0a32 pages: 32512.<5
> 8030d640: 72654b3e 206c656e 6d6d6f63 20646e61>Kernel command
> 8030d650: 656e696c 6f63203a 6c6f736e 74743d65 line: console=tt
> 8030d660: 63786d79 31312c30 30303235 3e363c0a ymxc0,115200.<6>
> 8030d670: 20444950 68736168 62617420 6520656c PID hash table e
> 8030d680: 6972746e 203a7365 20323135 64726f28 ntries: 512 (ord
> 8030d690: 203a7265 202c312d 38343032 74796220 er: -1, 2048 byt
> 8030d6a0: 0a297365 443e363c 72746e65 61632079 es).<6>Dentry ca
> 8030d6b0: 20656863 68736168 62617420 6520656c che hash table e
> 8030d6c0: 6972746e 203a7365 38333631 6f282034 ntries: 16384 (o
> 8030d6d0: 72656472 2c34203a 35353620 62203633 rder: 4, 65536 b
> 8030d6e0: 73657479 363c0a29 6f6e493e 632d6564 ytes).<6>Inode-c
> 8030d6f0: 65686361 73616820 61742068 20656c62 ache hash table
>
> The only mention of serial port is:
>
> 8030df00: 20656e69 69676572 72657473 3c0a6465 ine registered.<
> 8030df10: 6f693e36 68637320 6c756465 63207265 6>io scheduler c
> 8030df20: 72207166 73696765 65726574 64282064 fq registered (d
> 8030df30: 75616665 0a29746c 533e363c 61697265 efault).<6>Seria
> 8030df40: 49203a6c 6420584d 65766972 353c0a72 l: IMX driver.<5
> 8030df50: 7968703e 70616d73 616c7020 726f6674>physmap platfor
> 8030df60: 6c66206d 20687361 69766564 203a6563 m flash device:
> 8030df70: 30303230 30303030 20746120 30303061 02000000 at a000
> 8030df80: 30303030 3e363c0a 73796870 2d70616d 0000.<6>physmap-
> 8030df90: 73616c66 3a302e68 756f4620 3120646e flash.0: Found 1
> 8030dfa0: 36317820 76656420 73656369 20746120 x16 devices at
> 8030dfb0: 20307830 31206e69 69622d36 61622074 0x0 in 16-bit ba
> 8030dfc0: 202e6b6e 756e614d 74636166 72657275 nk. Manufacturer
> 8030dfd0: 20444920 30307830 39383030 69684320 ID 0x000089 Chi
> 8030dfe0: 44492070 30783020 31393830 353c0a63 p ID 0x00891c.<5
> 8030dff0: 7075533e 74726f70 726f6620 6d6f6320>Support for com
>
> .. And yes I did turn on early debug in the kernel config .. But I
> don't see any extra messages out the serial port.
> How can I check that my .config changes have propagated through ok? ..
Do you have CONFIG_SERIAL_IMX_CONSOLE in your config? You can just grep
for 'SERIAL_IMX_CONSOLE' in .config
You could also edit drivers/serial/imx.c and put some printk() messages
in serial_imx_probe() to see if it's being called to register your
device.
Of course, you'll have to look at the log_buf to read the messages :-)
I notice that your bootargs don't specify a file system. Perhaps if you
added that the system could actually make it up to multi-user and you
could log in (serial, SSH, ...)
> ----------------------------------------------------------------------
> --
> ------------------
> I want to die peacefully in my sleep, like my grandfather, not
> screaming and yelling like the passengers in his car.
>
> -----Original Message-----
> From: Gary Thomas [mailto:gary at mlbassoc.com]
> Sent: Friday, 29 July 2011 9:40 a.m.
> To: Bernard Mentink
> Cc: openembedded-devel at lists.openembedded.org
> Subject: Re: [oe] Kernel boot problems
>
> On 2011-07-28 14:51, Bernard Mentink wrote:
>> Many thanks for that,
>>
>> I had a look through the buffer and I see pretty much normal bootup
>> text ... It just isn't coming out of the serial port ..
>>
>> The only error I saw was the following:
>> -----------------------------------------
>> 8030cf80: 00000000 00000001 3a534656 6e614320 ........VFS: Can
>> 8030cf90: 20746f6e 6e65706f 6f6f7220 65642074 not open root de
>> 8030cfa0: 65636976 6e282220 296c6c75 726f2022 vice "(null)" or
>> 8030cfb0: 6b6e7520 6e776f6e 6f6c622d 32286b63 unknown-block(2
>> 8030cfc0: 64646100 66663d72 66666666 303a6666 .addr=ffffffff:0
>> 8030cfd0: 69202c31 2d3d7172 000a2931 20393830 1, irq=-1)..089
>> 8030cfe0: 30373178 20000a29 30307830 63313938 x170).. 0x00891c
>> 8030cff0: 2030000a 7830202d 65666666 30303030 ..0 - 0xfffe0000
>> 8030d000: 28202020 36393820 29426b20 2020200a ( 896 kB).
>> 8030d010: 414d4420 20202020 30203a20 63666678 DMA : 0xffc
>> 8030d020: 30303030 202d2030 66667830 30303065 00000 - 0xffe000
>> 8030d030: 20203030 20202820 4d203220 200a2942 00 ( 2 MB).
>> 8030d040: 76202020 6c6c616d 3a20636f 63783020 vmalloc : 0xc
>> 8030d050: 30303834 20303030 7830202d 30303466 4800000 - 0xf400
>> 8030d060: 30303030 28202020 30363720 29424d20 0000 ( 760 MB)
>> 8030d070: 2020200a 776f6c20 206d656d 30203a20 . lowmem : 0
>> 8030d080: 30306378 30303030 202d2030 34637830 xc0000000 - 0xc4
>> 8030d090: 30303030 20203030 20202820 4d203436 000000 ( 64 M
>> 8030d0a0: 200a2942 6d202020 6c75646f 3a207365 B). modules :
>> 8030d0b0: 62783020 30303066 20303030 7830202d 0xbf000000 - 0x
>> 8030d0c0: 30303063 30303030 28202020 36312020 c0000000 ( 16
>> 8030d0d0: 29424d20 2020200a 2e202020 74696e69 MB). .init
>> 8030d0e0: 30203a20 30306378 30303830 202d2030 : 0xc0008000 -
>> 8030d0f0: 30637830 30653130 20203030 20202820 0xc001e000 (
>> 8030d100: 6b203838 200a2942 20202020 65742e20 88 kB). .te
>> 8030d110: 3a207478 63783020 65313030 20303030 xt : 0xc001e000
>> 8030d120: 7830202d 65323063 30303031 28202020 - 0xc02e1000 (
>> 8030d130: 38323832 29426b20 2020200a 2e202020 2828 kB). .
>> 8030d140: 61746164 30203a20 32306378 30303666 data : 0xc02f600
>> 8030d150: 202d2030 30637830 36633033 20203065 0 - 0xc030c6e0
>> 8030d160: 20202820 6b203039 000a2942 00000000 ( 90 kB)......
>> --------------------------------------------
>>
>> A bit futher down the buffer I saw normal printout ..
>>
>> ______________________________________________
>>
>> 8030d380: 00000000 00000000 00000000 00000000 ................
>> 8030d390: 00000000 00000000 00000000 4c3e353c ............<5>L
>> 8030d3a0: 78756e69 72657620 6e6f6973 362e3220 inux version 2.6
>> 8030d3b0: 2e36332e 62282031 746e656d 406b6e69 .36.1 (bmentink@
>> 8030d3c0: 68637241 29786f42 63672820 65762063 ArchBox) (gcc ve
>> 8030d3d0: 6f697372 2e34206e 20332e35 31313032 rsion 4.5.3 2011
>> 8030d3e0: 31313330 72702820 6c657265 65736165 0311 (prerelease
>> 8030d3f0: 47282029 20294343 31232029 45525020 ) (GCC) ) #1 PRE
>> 8030d400: 54504d45 69724620 6c754a20 20393220 EMPT Fri Jul 29
>> 8030d410: 303a3830 36313a31 535a4e20 30322054 08:01:16 NZST 20
>> 8030d420: 3c0a3131 50433e34 41203a55 36764d52 11.<4>CPU: ARMv6
>> 8030d430: 6d6f632d 69746170 20656c62 636f7270 -compatible proc
>> 8030d440: 6f737365 345b2072 62373031 5d343633 essor [4107b364]
>> 8030d450: 76657220 6f697369 2034206e 4d524128 revision 4 (ARM
>> 8030d460: 45543676 202c294a 303d7263 33356330 v6TEJ), cr=00c53
>> 8030d470: 0a663738 433e343c 203a5550 54504956 87f.<4>CPU: VIPT
>> 8030d480: 6e6f6e20 61696c61 676e6973 74616420 nonaliasing dat
>> 8030d490: 61632061 2c656863 50495620 6f6e2054 a cache, VIPT no
>> 8030d4a0: 696c616e 6e697361 6e692067 75727473 naliasing instru
>> 8030d4b0: 6f697463 6163206e 0a656863 4d3e343c ction cache.<4>M
>> 8030d4c0: 69686361 203a656e 69676f4c 20445063 achine: LogicPD
>> 8030d4d0: 584d2e69 53203133 3c0a4d4f 654d3e34 i.MX31 SOM.<4>Me
>> 8030d4e0: 79726f6d 6c6f7020 3a796369 43434520 mory policy: ECC
>> 8030d4f0: 73696420 656c6261 44202c64 20617461 disabled, Data
>> 8030d500: 68636163 72772065 62657469 0a6b6361 cache writeback.
>> 8030d510: 4f3e373c 6f6e206e 30206564 746f7420<7>On node 0 tot
>> 8030d520: 61706c61 3a736567 33363120 3c0a3438 alpages: 16384.<
>> 8030d530: 72663e37 615f6565 5f616572 74696e69 7>free_area_init
>> 8030d540: 646f6e5f 6e203a65 2065646f 70202c30 _node: node 0, p
>> 8030d550: 74616467 33306320 64306330 6e202c38 gdat c030c0d8, n
>> 8030d560: 5f65646f 5f6d656d 2070616d 32333063 ode_mem_map c032
>> 8030d570: 30303031 3e373c0a 6f4e2020 6c616d72 1000.<7> Normal
>> 8030d580: 6e6f7a20 31203a65 70203832 73656761 zone: 128 pages
>> 8030d590: 65737520 6f662064 656d2072 70616d6d used for memmap
>> 8030d5a0: 3e373c0a 6f4e2020 6c616d72 6e6f7a20 .<7> Normal zon
>> 8030d5b0: 30203a65 67617020 72207365 72657365 e: 0 pages reser
>> 8030d5c0: 0a646576 203e373c 726f4e20 206c616d ved.<7> Normal
>> ---------------------------------------------------------------------
>> -
>>
>> I am not sure why it is not printing out the port, my boot param =
>> "console=ttymxc0,115200"
>> And the relevent part of conf/machine/mx31ads.conf = SERIAL_CONSOLE =
>> "115200 ttymxc0"
>>
>> Any idea's?
>
> If you look a bit further you may see some messages about what the
> serial ports are called, e.g. on my OMAP/3530 I see these messages:
> omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
> console [ttyO0] enabled
> omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
> omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
>
> I don't have an iMX31 available so it's hard to know what they are
> called.
>
> Did you try enabling the early print messages like was suggested? If
> it works these can be a big help. Your problem is that the kernel is
> getting started, albeit failing because of no root file system but
> that's the next step. If the console=XXX selection on the command
> line is incorrect, there will be no place for the bootup messages to
> go, hence the silence.
>
>
>> ---------------------------------------------------------------------
>> -
>> --
>> ------------------
>> I want to die peacefully in my sleep, like my grandfather, not
>> screaming and yelling like the passengers in his car.
>>
>> -----Original Message-----
>> From: Gary Thomas [mailto:gary at mlbassoc.com]
>> Sent: Thursday, 28 July 2011 11:22 p.m.
>> To: openembedded-devel at lists.openembedded.org
>> Cc: Bernard Mentink
>> Subject: Re: [oe] Kernel boot problems
>>
>> On 2011-07-27 20:20, Bernard Mentink wrote:
>>>
>>> Hi Guys,
>>>
>>> I have got a bit further with my efforts to boot linux on an imx31
>>> based platform using u-boot.
>>>
>>> My console output is now:
>>>
>>> ----------------------------------------------------------------
>>> uboot> bootm 80100000
>>> ## Booting kernel from Legacy Image at 80100000 ...
>>> Image Name: Angstrom/2.6.36/mx31ads
>>> Created: 2011-07-28 2:03:27 UTC
>>> Image Type: ARM Linux Kernel Image (uncompressed)
>>> Data Size: 1586172 Bytes = 1.5 MiB
>>> Load Address: 8f000000
>>> Entry Point: 8f000000
>>> Verifying Checksum ... OK
>>> Loading Kernel Image ... OK
>>> OK
>>>
>>> Starting kernel ...
>>>
>>> Uncompressing Linux... done, booting the kernel.
>>> -------------------------------------------------------------------
>>>
>>> So it seems to be getting to the 1st part of the kernel boot
>>> process,
>
>>> then hangs (I presume the last line comes from kernel code.) I don't
>>> know if the kernel is hanging, or if I don't have any more serial
>>> out
>
>>> ....
>>> I am passing "console=ttymxc0,115200" to the kernel ..
>>> Can someone confirm:
>>> A) If I have the correct Entry point, or does this need to be offset
>>> into the kernel? ..
>>> B) Is the serial console parameters correct?
>>> C) What is the correct way to set up the memory map? (my ram starts
>>> at
>>
>>> 0x80000000, ends at 0x8fffffff)
>>> D) Is there a way to debug initial kernel stuff with serial output?
>>> In the above, I have decompressed the kernel to the top of the 256M
>> ram,
>>> but have only advertised 120M via the bootloader ... for now, not
>>> knowing what is correct and not wanting the kernel to stomp all over
>>> itself running in ram.
>>
>> Analyzing this failure can be hard. If you have some sort of JTAG
>> setup you might be able to break in at this point, figure out where
>> it's hanging up, etc.
>>
>> Even if you don't have JTAG, there might be some crumbs left around
>> for you to look at. Linux keeps everything that goes to the
"console"
>
>> in a circular buffer __log_buf[]. Look up that symbol in System.map
>> (which will be found in your linux build tree). Here's the tricky
>> part - the map will show a logical address, but U-Boot only knows
>> physical addresses.
>> Normally the mapping is pretty easy, e.g. on my OMAP/3530 I might
see:
>> $ grep __log_buf linux-2.6.37/System.map
>> c0527058 b __log_buf
>> So in U-Boot, I would look at the buffer like this:
>> U-Boot> md 0x80527058
>> 80527058: 4c3e353c 78756e69 72657620 6e6f6973<5>Linux version
>> 80527068: 362e3220 2e37332e 67282033 6d6f6874 2.6.37.3
(gthom
>> 80527078: 74407361 6e617469 67282029 76206363 as at titan) (gcc
v
>> 80527088: 69737265 34206e6f 312e362e 31303220 ersion 4.6.1
201
>> 80527098: 32363031 70282037 65726572 7361656c 10627
(prereleas
>> 805270a8: 28202965 29434347 23202920 72462031 e) (GCC) ) #1
Fr
>> 805270b8: 754a2069 3232206c 3a393020 303a3135 i Jul 22
09:51:0
>> ...
>>
>> Keep looking through this buffer until it stops with useful
> characters.
>> That may tell you where the kernel got hung up and why. If you find
>> only garbage, it may be more difficult to tell.
>>
>> Note: hopefully your board has a RESET button which you can use to
>> get
>
>> back into U-Boot once the kernel boot process hangs. Power cycling
>> to
>
>> reset the board won't work as the contents of RAM will likely be
>> destroyed.
>>
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel at lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
More information about the Openembedded-devel
mailing list