[oe] [PATCH] ti-wifi-utils: install calibrator ini files to rootfs
Koen Kooi
koen at dominion.thruhere.net
Sun Jun 5 20:51:36 UTC 2011
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 05-06-11 21:33, Reizer, Eyal wrote:
> Ok, I will change it to /usr/share/ti-wifi-utils...
TO be more inline with the other recipes, /usr/share/ti/wifi-utils
regards,
Koen
>
> Best regards,
> Eyal
>
> Koen Kooi <koen at dominion.thruhere.net> wrote:
>
>
> On 05-06-11 17:32, Eyal Reizer wrote:
>> In order to perform wifi calibration the calibrator needs to be
>> provided as input with a reference NVS file that matches the wifi chip
>> and the radio mudule that is being used.
>
>> This patch install these ini files to the root file system so they can
>> be used when performing the calibration.
>
>> Signed-off-by: Eyal Reizer <eyalr at ti.com>
>> ---
>> recipes/ti/ti-wifi-utils_git.bb | 13 ++++++++++++-
>> 1 files changed, 12 insertions(+), 1 deletions(-)
>
>> diff --git a/recipes/ti/ti-wifi-utils_git.bb b/recipes/ti/ti-wifi-utils_git.bb
>> index 8d10051..d5e548b 100644
>> --- a/recipes/ti/ti-wifi-utils_git.bb
>> +++ b/recipes/ti/ti-wifi-utils_git.bb
>> @@ -3,7 +3,7 @@ LICENSE = "TI-BSD"
>
>> DEPENDS = "libnl"
>
>> -PR ="r2"
>> +PR ="r3"
>> PV ="0.0"
>> PR_append = "+gitr${SRCPV}"
>
>> @@ -17,5 +17,16 @@ CFLAGS += " -DCONFIG_LIBNL20"
>
>> do_install() {
>> install -d ${D}${bindir}
>> + install -d ${D}${bindir}/ti-wifi-utils/ini_files/127x
>> + install -d ${D}${bindir}/ti-wifi-utils/ini_files/128x
>
> Ini files belong somewhere in /usr/share or maybe /etc, but not in /usr/bin.
>
> regards,
>
> Koen
_______________________________________________
Openembedded-devel mailing list
Openembedded-devel at lists.openembedded.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFN6+xYMkyGM64RGpERAhXWAJ9KmVP1jKAVlRzV5KYeEbz3ZHFx7QCfa/xu
yD3VtkItpl2cu4UtY4c9X2Q=
=vcmC
-----END PGP SIGNATURE-----
More information about the Openembedded-devel
mailing list