[oe] [PATCH v2 1/2] mx28 SOC: set correct addresses for u-boot

[Andreas Mueller]

The initial patch was build tested only because a hardware for tests was not
available at the time initial patches were sent. The modifications lead to the
following boot log (thanks to Christian Borutta for testing):

U-Boot 2009.08 (May 09 2011 - 16:42:53)

Freescale i.MX28 family
CPU:   454 MHz
BUS:   151 MHz
EMI:   205 MHz
GPMI:   24 MHz
DRAM:  128 MB
MMC:   IMX_SSP_MMC: 0, IMX_SSP_MMC: 1
In:    serial
Out:   serial
Err:   serial
Net:   got MAC address from IIM: 00:04:9f:01:4d:57
FEC0
Hit any key to stop autoboot:  0
reading uImage

2519812 bytes read
   Image Name:   Angstrom/2.6.35/mx28evk
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2519748 Bytes =  2.4 MB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.35.3 (borutta at debian) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 PREEMPT Thu May 12 09:54:03 CEST 2011
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: Freescale MX28EVK board
...

Signed-off-by: Andreas Mueller <schnitzeltony at gmx.de>
---
 conf/machine/include/imx28.inc |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/conf/machine/include/imx28.inc b/conf/machine/include/imx28.inc
index 38248a8..b50f000 100644
--- a/conf/machine/include/imx28.inc
+++ b/conf/machine/include/imx28.inc
@@ -10,8 +10,8 @@ MACHINE_KERNEL_PR = "r0"
 
 KERNEL_IMAGETYPE = "uImage"
 
-UBOOT_ENTRYPOINT = "0x8000"
-UBOOT_LOADADDRESS = "0x8000"
+UBOOT_ENTRYPOINT = "0x40008000"
+UBOOT_LOADADDRESS = "0x40008000"
 
 EXTRA_IMAGEDEPENDS += "u-boot"
 
-- 
1.7.4.4