[oe] [PATCH] u-boot.inc: allow variable make targets

[Maupin, Chase]

> -----Original Message-----
> From: openembedded-devel-bounces at lists.openembedded.org
> [mailto:openembedded-devel-bounces at lists.openembedded.org] On Behalf Of
> Maupin, Chase
> Sent: Tuesday, March 15, 2011 10:16 AM
> To: Chase Maupin; openembedded-devel at lists.openembedded.org
> Subject: Re: [oe] [PATCH] u-boot.inc: allow variable make targets
> 
> I should have probably clarified that this was intended for the 2011.03-
> maintenance branch.  Tom, I have also submitted this to the oe-core.
> Would you be willing to pick this up?

Just FYI this has been merged into the oe-core master (see http://lists.linuxtogo.org/pipermail/openembedded-core/2011-March/000533.html) as well as the angstrom-layers master (see http://lists.linuxtogo.org/pipermail/openembedded-core/2011-March/000512.html) 

> 
> > -----Original Message-----
> > From: Chase Maupin [mailto:chasemaupin03 at gmail.com]
> > Sent: Tuesday, March 15, 2011 9:42 AM
> > To: openembedded-devel at lists.openembedded.org
> > Cc: Maupin, Chase
> > Subject: [PATCH] u-boot.inc: allow variable make targets
> >
> > * Later versions of u-boot sometimes have top level make targets
> >   such as u-boot.imx, u-boot.kwb, and for upcoming TI devices
> >   u-boot.ti.
> > * These targets define different calls to the mkimage tool to
> >   change the images created, such as changing the load address.
> > * This change allows recipes to change the default make target
> >   of "all" to something like u-boot.ti or u-boot.imx by setting
> >   the UBOOT_MAKE_TARGET variable.
> >
> > Signed-off-by: Chase Maupin <Chase.Maupin at ti.com>
> > ---
> >  recipes/u-boot/u-boot.inc |    3 ++-
> >  1 files changed, 2 insertions(+), 1 deletions(-)
> >
> > diff --git a/recipes/u-boot/u-boot.inc b/recipes/u-boot/u-boot.inc
> > index 88c6a4d..ffd1e1e 100644
> > --- a/recipes/u-boot/u-boot.inc
> > +++ b/recipes/u-boot/u-boot.inc
> > @@ -16,6 +16,7 @@ UBOOT_MACHINE ?= "${MACHINE}_config"
> >  UBOOT_BINARY ?= "u-boot.bin"
> >  UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.bin"
> >  UBOOT_SYMLINK ?= "u-boot-${MACHINE}.bin"
> > +UBOOT_MAKE_TARGET ?= "all"
> >
> >  do_configure () {
> >  	oe_runmake ${UBOOT_MACHINE}
> > @@ -25,7 +26,7 @@ do_compile () {
> >  	unset LDFLAGS
> >  	unset CFLAGS
> >  	unset CPPFLAGS
> > -	oe_runmake all
> > +	oe_runmake ${UBOOT_MAKE_TARGET}
> >  	oe_runmake tools env HOSTCC="${CC}"
> >  }
> >
> > --
> > 1.7.0.4
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel