[oe] arduino IDE on beagleboard

[Koen Kooi]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 03-05-11 15:43, Robert Schuster wrote:
> Hi,
> 
> Am 03.05.2011 13:15, schrieb Koen Kooi:
>> First you have to fix the included rxtx install:
>> http://dominion.thruhere.net/koen/cms/making-processing-arduino-ide-replicaorg-work-on-arm
> Yep, same story as on an amd64 machine. :)
> 
>>> Could you upload programs to the
>>> arduino and receive stuff through the serial port?
>>
>> That works, and if you download and untar:
>>
>> http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-binutils-2.21.tar.bz2
>> http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-gcc-4.5.2.tar.bz2
>> http://dominion.thruhere.net/koen/angstrom/beagleboard/avr-libc-1.7.1.tar.bz2
> How did you build those? Directly on a BB using gcc? I looked into
> making recipes for OE for this
> but my toolchain-foo is way to small for this.

I built those natively on my beagle, that was faster than figuring out
canadian cross in OE :)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFNwBFnMkyGM64RGpERAq47AKCWLZ3hCjVSlM/3vMn1Amc+INd/KgCfTcJP
fv7h7p3wQKIsEPxvk8xSFGI=
=yiNr
-----END PGP SIGNATURE-----