[oe] ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
ibrahim demir
juhsis at yahoo.com
Fri Sep 23 14:16:40 UTC 2011
I have fixed this problem.. As you said, it creates all the required things in /opt/ti/.. instead of /OEBASE directory. Basicly what i did is, copying all the things under directory /opt/ti and pasting them where the /bin/cl6x must stay.
Thanks for your help.
On 2011-09-23 05:10, ibrahim demir wrote:
> Yes, i had write permission to /opt and i set it only read and execute. But when i run "bitbake ti-codec-engine" it gives "/bin/sh:
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/sysroots/beagleboard-angstrom-linux-gnueabi/usr/share/ti/ti-cgt6x-tree/bin/cl6x: No
> such file or directory" (which is the error message, i get this morning a lot) What should i do next?
Please keep your replies on the mailing list so everyone benefits. Also, top-posting is poor form.
You'll need to clean out the tools package so it gets reinstalled.
At the very least, try these steps:
% bitbake ti-cgt6x ti-codec-engine -c clean
% bitbake ti-codec-engine
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
> *From:* Gary Thomas <gary at mlbassoc.com>
> *To:* openembedded-devel at lists.openembedded.org
> *Cc:* ibrahim demir <juhsis at yahoo.com>
> *Sent:* Friday, September 23, 2011 1:47 PM
> *Subject:* Re: [oe] ti_cgt_c6000_6.1.17_setup_linux_x86.bin error while installing ti-codec-engine
>
> On 2011-09-23 03:36, ibrahim demir wrote:
>> Dear developers,
>>
>>
>> I mentioned that an error at my last message half our ago, but when i run this commands there appear another error:
>>
>> #bitbake -f -c fetch ti-cgt6x
>> #bitbake ti-codec-engine
>>
>> The result of first command is:
>>
>> *****************************************************************************
>> parana at parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake -f -c fetch ti-cgt6x
>> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
>> Loading cache: 100% |###########################################| ETA: 00:00:00
>> Loaded 7202 entries from dependency cache.
>> NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
>> NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:16
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
>> Parsing recipes: 100% |#########################################| Time: 00:00:19
>> Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>>
>> Build Configuration:
>> BB_VERSION = "1.12.0"
>> METADATA_BRANCH = "2011.03-maintenance"
>> METADATA_REVISION = "ece41e4"
>> TARGET_ARCH = "arm"
>> TARGET_OS = "linux-gnueabi"
>> MACHINE = "beagleboard"
>> DISTRO = "angstrom"
>> DISTRO_VERSION = "2011.03"
>> TARGET_FPU = "hard"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing RunQueue Tasks
>> NOTE: Running task 2 of 2 (ID: 0, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_fetch)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_fetch: Succeeded
>> NOTE: Tasks Summary: Attempted 2 tasks of which 1 didn't need to be rerun and 0 failed.
>> *****************************************************************************
>>
>> Then the second and the error is can be seen at log:
>>
>> *****************************************************************************
>> parana at parana-desktop:/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts$ bitbake ti-codec-engine
>> NOTE: Psyco JIT Compiler (http://psyco.sf.net) not available. Install it to increase performance.
>> Loading cache: 100% |###########################################| ETA: 00:00:00
>> Loaded 7202 entries from dependency cache.
>> NOTE: Angstrom DOES NOT support fso-apm because regular apmd is good enough--:--
>> NOTE: Angstrom DOES NOT support ipkg because ipkg has been superseded by opkg:13
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support libiconv because the glibc builtin iconv replacement is used
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-libs because bluez-libs 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bluez-utils because bluez-utils 3.x has been replaced by bluez4
>> NOTE: Angstrom DOES NOT support bash-noemu because doesn't work on the target:03
>> Parsing recipes: 100% |#########################################| Time: 00:00:16
>> Parsing of 7333 .bb files complete (6576 cached, 757 parsed). 7979 targets, 316 skipped, 0 masked, 0 errors.
>>
>> Build Configuration:
>> BB_VERSION = "1.12.0"
>> METADATA_BRANCH = "2011.03-maintenance"
>> METADATA_REVISION = "ece41e4"
>> TARGET_ARCH = "arm"
>> TARGET_OS = "linux-gnueabi"
>> MACHINE = "beagleboard"
>> DISTRO = "angstrom"
>> DISTRO_VERSION = "2011.03"
>> TARGET_FPU = "hard"
>>
>> NOTE: Resolving any missing task queue dependencies
>> NOTE: Preparing runqueue
>> NOTE: Executing RunQueue Tasks
>> NOTE: Running task 743 of 1240 (ID: 275, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_unpack)
>> NOTE: Running task 744 of 1240 (ID: 290, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb,
> do_distribute_sources)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_distribute_sources: Succeeded
>>
>> This will install C6000 Code Generation Tools on your computer. Continue? [n/Y]
>> Software License Agreement for
>> Code Generation Tools, Utilities and Run-Time Libraries
>>
>> /--------------------------------------------------------------------
>> | IMPORTANT - PLEASE READ THE FOLLOWING LICENSE AGREEMENT CAREFULLY. |
>> | |
>> | THIS IS A LEGALLY BINDING AGREEMENT. AFTER YOU READ THIS LICENSE |
>> | AGREEMENT, YOU WILL BE ASKED WHETHER YOU ACCEPT AND AGREE TO THE |
>> | TERMS OF THIS LICENSE AGREEMENT. DO NOT CLICK "I HAVE READ AND |
>> | AGREE" UNLESS: (1) YOU ARE AUTHORIZED TO ACCEPT AND AGREE TO THE |
>> | TERMS OF THIS LICENSE AGREEMENT ON BEHALF OF YOURSELF AND YOUR |
>> | COMPANY; AND (2) YOU INTEND TO ENTER INTO AND TO BE BOUND BY THE |
>> | TERMS OF THIS LEGALLY BINDING AGREEMENT ON BEHALF OF YOURSELF AND |
>> | YOUR COMPANY. |
>> \--------------------------------------------------------------------/
>>
>> IMPORTANT -- READ CAREFULLY: This software license agreement
>> ("Agreement") is a legal agreement between you (either an individual
>> or entity) and Texas Instruments Incorporated (TI"). The "Licensed
>> Materials" subject to this Agreement include the software programs
>> that TI has granted you access to download with this Agreement and any
>> "on-line" or electronic documentation associated with these programs,
>> or any portion thereof, as well as any updates or upgrades to such
>> -- Press space to continue or 'q' to quit --
>> Do you accept the TI CG EULA in LICENSE.txt? [y/N]
>>
>> Where do you want to install C6000 Code Generation Tools?
>> [/opt/TI/TI_CGT_C6000_6.1.17]
>> Installing C6000 Code Generation Tools...
>>
>> Installing Linux Code Generation Tools...
>> Installing Unix Format READMEs...
>> Installing Linux Format Include Files...
>> Installing Linux Format Libraries...
>> Installing Unix Manual Pages...
>>
>> Installation complete.
>>
>> ---------------------------------------------------------------------------
>>
>> Remember to set environment variables appropriate to your shell. Examples:
>>
>> (ba)sh -
>> export
>> C6X_C_DIR="/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>>
>> tcsh -
>> setenv C6X_C_DIR
>> "/opt/TI/TI_CGT_C6000_6.1.17/include;/opt/TI/TI_CGT_C6000_6.1.17/lib"
>>
>> DOS -
>> set
>> C6X_C_DIR=/opt/TI/TI_CGT_C6000_6.1.17\include;/opt/TI/TI_CGT_C6000_6.1.17\lib
>>
>> ---------------------------------------------------------------------------
>>
>> -- Press space to continue ---- Press space to continue --NOTE: package ti-cgt6x-1_6_1_17-r4: task do_unpack: Succeeded
>> NOTE: Running task 1184 of 1240 (ID: 276, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_patch)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_patch: Succeeded
>> NOTE: Running task 1185 of 1240 (ID: 286, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_configure)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_configure: Succeeded
>> NOTE: Running task 1186 of 1240 (ID: 287, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_qa_configure)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_qa_configure: Succeeded
>> NOTE: Running task 1187 of 1240 (ID: 288, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_compile)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Started
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_compile: Succeeded
>> NOTE: Running task 1188 of 1240 (ID: 277, /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install)
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Started
>> ERROR: Logfile of failure stored in:
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
>> Log data follows:
>> | + do_install
>> | + install -d
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
>> | + cp -pPrf
> '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*'
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/image/usr/share/ti/ti-cgt6x-tree
>> | cp: cannot stat
> `/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/cgt6x_6_1_17/*': No
> such file or directory
>> NOTE: package ti-cgt6x-1_6_1_17-r4: task do_install: Failed
>> ERROR: Function 'do_install' failed (see
> /media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/build/tmp-angstrom_2008_1/work/beagleboard-angstrom-linux-gnueabi/ti-cgt6x-1_6_1_17-r4/temp/log.do_install.24167
> for further information)
>> ERROR: Task 277 (/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb, do_install) failed with exit code '1'
>> ERROR: '/media/8cb6c643-3377-4bb9-99bc-810069de5757/home/parana/setup-scripts/sources/openembedded/recipes/ti/ti-cgt6x_6.1.17.bb' failed
>> *****************************************************************************
>>
>> Even if i didnt understand why i get all the errors bitbake can generate:) , i still wonder what is wrong..
>
> Check to make sure that you don't have write permission to /opt
> If you have write permission in the directory /opt, the installer
> fails to put the tools where they belong in your OE build.
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
>
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
More information about the Openembedded-devel
mailing list