[oe] [oe-core] 3 build machines all failing in the same manner - was:ld segfault cant figure it out

[j]

On 04/24/2012 02:03 PM, Phil Blundell wrote:
> On Tue, 2012-04-24 at 13:57 -0700, j wrote:
>> The build machines all give messages like this just vary on libc version
>> listed
>>
>> [47152.769257] ld[22617]: segfault at 403 ip 00007f2149cfd435 sp
>> 00007fffb83ccb50 error 4 in libc-2.15.so[7f2149cb6000+197000]
>> 2012-04-18T14:50:08-07:00 localhost kernel: [47163.860996] ld[31096]:
>> segfault at 403 ip 00007fc2da152435 sp 00007fffab491c30 error 4 in
>> libc-2.15.so[7fc2da10b000+197000]
> Does this correlate with an actual problem, or did you just see those
> messages in the log and think that they were cause for concern?
I was assuming since the machine segfaulted and I could not get working 
images they were related.

>
> If I had to guess I would say that this is probably some autoconf test
> which is tickling a bug in ld.  You could probably establish which
> package is doing that by looking at the timestamps and correlating them
> with the build logs.

I will try this once the machines go through the process again.

>
>> qa.log has more than these messages but every machines logs are the same
>> like this
>>
>> udev-182: udev:
>> /home/gusterson/OpenEmbed/setup-scripts/build/tmp-angstrom_v2012_05-eglibc/work/armv7a-angstrom-linux-gnueabi/udev-182-r0/packages-split/libgudev/lib/libgudev-1.0.so.0.1.1
>> links to something under exec_prefix
> That doesn't appear to be related to the ld segfault
> .
>> each one of the machines from a fresh install have this problem. The
>> resulting image boots but does not fully function. I have issues such as
>> the native sdk does not install all the packages correctly.
>> example would be install.
>> normall you would find it
>> /usr/bin/install
>> I end up with
>> /home/bill/OE/usr/bin/install
> ... and nor really does this.  This latter problem is almost certainly
> just a bug in the SDK packaging and nothing at all to do with your build
> host.
>
> p.
>
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel at lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

I will just focus on trying to match timestamps with the segfault and 
trying to sort out all the issues once I have a built image.

I know I do not fully grasp everything here so thank you for your help 
and if I find anything relevant or can post further info on this I will 
share. Unless there are more suggestions.

Thank you