[oe] [meta-systemd][PATCH V4 8/8] kernel.bbclass: Rename to machine_kernel_pr.bbclass which provides added functionality
Khem Raj
raj.khem at gmail.com
Sat Aug 4 20:05:36 UTC 2012
Diffing with the OE-Core's kernel.bbclass only difference is setting of
machine kernel pr. So lets convert it to a separate class which provides
the added functionality and let everyone use kernel.bbclass from kernel
It needs the dependent layers to inherit this class in addition to
kernel.bbclass
It leaves up with one less conflict with OE-Core
Signed-off-by: Khem Raj <raj.khem at gmail.com>
---
meta-oe/classes/kernel.bbclass | 556 -----------------------------
meta-oe/classes/machine_kernel_pr.bbclass | 8 +
2 files changed, 8 insertions(+), 556 deletions(-)
delete mode 100644 meta-oe/classes/kernel.bbclass
create mode 100644 meta-oe/classes/machine_kernel_pr.bbclass
diff --git a/meta-oe/classes/kernel.bbclass b/meta-oe/classes/kernel.bbclass
deleted file mode 100644
index 2bb1b5b..0000000
--- a/meta-oe/classes/kernel.bbclass
+++ /dev/null
@@ -1,556 +0,0 @@
-inherit linux-kernel-base module_strip
-
-PROVIDES += "virtual/kernel"
-DEPENDS += "virtual/${TARGET_PREFIX}gcc kmod-native virtual/${TARGET_PREFIX}gcc${KERNEL_CCSUFFIX} update-modules"
-
-# we include gcc above, we dont need virtual/libc
-INHIBIT_DEFAULT_DEPS = "1"
-
-KERNEL_IMAGETYPE ?= "zImage"
-INITRAMFS_IMAGE ?= ""
-INITRAMFS_TASK ?= ""
-
-python __anonymous () {
- kerneltype = d.getVar('KERNEL_IMAGETYPE', True) or ''
- if kerneltype == 'uImage':
- depends = d.getVar("DEPENDS", True)
- depends = "%s u-boot-mkimage-native" % depends
- d.setVar("DEPENDS", depends)
-
- image = d.getVar('INITRAMFS_IMAGE', True)
- if image:
- d.setVar('INITRAMFS_TASK', '${INITRAMFS_IMAGE}:do_rootfs')
-
- machine_kernel_pr = d.getVar('MACHINE_KERNEL_PR', True)
-
- if machine_kernel_pr:
- d.setVar('PR', machine_kernel_pr)
-}
-
-inherit kernel-arch deploy
-
-PACKAGES_DYNAMIC += "kernel-module-*"
-PACKAGES_DYNAMIC += "kernel-image-*"
-PACKAGES_DYNAMIC += "kernel-firmware-*"
-
-export OS = "${TARGET_OS}"
-export CROSS_COMPILE = "${TARGET_PREFIX}"
-
-KERNEL_PRIORITY ?= "${@int(d.getVar('PV',1).split('-')[0].split('+')[0].split('.')[0]) * 10000 + \
- int(d.getVar('PV',1).split('-')[0].split('+')[0].split('.')[1]) * 100 + \
- int(d.getVar('PV',1).split('-')[0].split('+')[0].split('.')[-1])}"
-
-KERNEL_RELEASE ?= "${KERNEL_VERSION}"
-
-KERNEL_CCSUFFIX ?= ""
-KERNEL_LDSUFFIX ?= ""
-
-# Set TARGET_??_KERNEL_ARCH in the machine .conf to set architecture
-# specific options necessary for building the kernel and modules.
-#FIXME: should be this: TARGET_CC_KERNEL_ARCH ?= "${TARGET_CC_ARCH}"
-TARGET_CC_KERNEL_ARCH ?= ""
-HOST_CC_KERNEL_ARCH ?= "${TARGET_CC_KERNEL_ARCH}"
-TARGET_LD_KERNEL_ARCH ?= ""
-HOST_LD_KERNEL_ARCH ?= "${TARGET_LD_KERNEL_ARCH}"
-
-KERNEL_CC = "${CCACHE}${HOST_PREFIX}gcc${KERNEL_CCSUFFIX} ${HOST_CC_KERNEL_ARCH}${TOOLCHAIN_OPTIONS}"
-KERNEL_LD = "${HOST_PREFIX}ld${KERNEL_LDSUFFIX} ${HOST_LD_KERNEL_ARCH}${TOOLCHAIN_OPTIONS}"
-
-# Where built kernel lies in the kernel tree
-KERNEL_OUTPUT ?= "arch/${ARCH}/boot/${KERNEL_IMAGETYPE}"
-KERNEL_IMAGEDEST = "boot"
-
-#
-# configuration
-#
-export CMDLINE_CONSOLE = "console=${@d.getVar("KERNEL_CONSOLE",1) or "ttyS0"}"
-
-KERNEL_VERSION = "${@get_kernelversion('${B}')}"
-
-KERNEL_LOCALVERSION ?= ""
-
-# kernels are generally machine specific
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-# U-Boot support
-UBOOT_ENTRYPOINT ?= "20008000"
-UBOOT_LOADADDRESS ?= "${UBOOT_ENTRYPOINT}"
-
-# For the kernel, we don't want the '-e MAKEFLAGS=' in EXTRA_OEMAKE.
-# We don't want to override kernel Makefile variables from the environment
-EXTRA_OEMAKE = ""
-
-KERNEL_ALT_IMAGETYPE ??= ""
-
-# Define where the kernel headers are installed on the target as well as where
-# they are staged.
-KERNEL_SRC_PATH = "/usr/src/kernel"
-
-KERNEL_IMAGETYPE_FOR_MAKE = "${@(lambda s: s[:-3] if s[-3:] == ".gz" else s)(d.getVar('KERNEL_IMAGETYPE', True))}"
-
-kernel_do_compile() {
- unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
- oe_runmake include/linux/version.h CC="${KERNEL_CC}" LD="${KERNEL_LD}"
- oe_runmake ${KERNEL_IMAGETYPE_FOR_MAKE} ${KERNEL_ALT_IMAGETYPE} CC="${KERNEL_CC}" LD="${KERNEL_LD}"
- if test "${KERNEL_IMAGETYPE_FOR_MAKE}.gz" = "${KERNEL_IMAGETYPE}"; then
- gzip -9c < "${KERNEL_IMAGETYPE_FOR_MAKE}" > "${KERNEL_OUTPUT}"
- fi
-}
-
-do_compile_kernelmodules() {
- unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
- if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
- oe_runmake ${PARALLEL_MAKE} modules CC="${KERNEL_CC}" LD="${KERNEL_LD}"
- else
- bbnote "no modules to compile"
- fi
-}
-addtask compile_kernelmodules after do_compile before do_install
-
-kernel_do_install() {
- #
- # First install the modules
- #
- unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
- if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
- oe_runmake DEPMOD=echo INSTALL_MOD_PATH="${D}" modules_install
- rm -f "${D}/lib/modules/${KERNEL_VERSION}/modules.order"
- rm -f "${D}/lib/modules/${KERNEL_VERSION}/modules.builtin"
- rm "${D}/lib/modules/${KERNEL_VERSION}/build"
- rm "${D}/lib/modules/${KERNEL_VERSION}/source"
- else
- bbnote "no modules to install"
- fi
-
- #
- # Install various kernel output (zImage, map file, config, module support files)
- #
- install -d ${D}/${KERNEL_IMAGEDEST}
- install -d ${D}/boot
- install -m 0644 ${KERNEL_OUTPUT} ${D}/${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}
- install -m 0644 System.map ${D}/boot/System.map-${KERNEL_VERSION}
- install -m 0644 .config ${D}/boot/config-${KERNEL_VERSION}
- install -m 0644 vmlinux ${D}/boot/vmlinux-${KERNEL_VERSION}
- [ -e Module.symvers ] && install -m 0644 Module.symvers ${D}/boot/Module.symvers-${KERNEL_VERSION}
- install -d ${D}/etc/modules-load.d
- install -d ${D}/etc/modprobe.d
-
- #
- # Support for external module building - create a minimal copy of the
- # kernel source tree.
- #
- kerneldir=${D}${KERNEL_SRC_PATH}
- install -d $kerneldir
-
- #
- # Store the kernel version in sysroots for module-base.bbclass
- #
-
- echo "${KERNEL_VERSION}" > $kerneldir/kernel-abiversion
-
- #
- # Store kernel image name to allow use during image generation
- #
-
- echo "${KERNEL_IMAGE_BASE_NAME}" >$kerneldir/kernel-image-name
-
- #
- # Copy the entire source tree. In case an external build directory is
- # used, copy the build directory over first, then copy over the source
- # dir. This ensures the original Makefiles are used and not the
- # redirecting Makefiles in the build directory.
- #
- # work and sysroots can be on different partitions, so we can't rely on
- # hardlinking, unfortunately.
- #
- cp -fR * $kerneldir
- cp .config $kerneldir
- if [ "${S}" != "${B}" ]; then
- cp -fR ${S}/* $kerneldir
- fi
- install -m 0644 ${KERNEL_OUTPUT} $kerneldir/${KERNEL_IMAGETYPE}
- install -m 0644 System.map $kerneldir/System.map-${KERNEL_VERSION}
-
- #
- # Clean and remove files not needed for building modules.
- # Some distributions go through a lot more trouble to strip out
- # unecessary headers, for now, we just prune the obvious bits.
- #
- # We don't want to leave host-arch binaries in /sysroots, so
- # we clean the scripts dir while leaving the generated config
- # and include files.
- #
- oe_runmake -C $kerneldir CC="${KERNEL_CC}" LD="${KERNEL_LD}" clean
- make -C $kerneldir _mrproper_scripts
- find $kerneldir -path $kerneldir/lib -prune -o -path $kerneldir/tools -prune -o -path $kerneldir/scripts -prune -o -name "*.[csS]" -exec rm '{}' \;
- find $kerneldir/Documentation -name "*.txt" -exec rm '{}' \;
-
- # As of Linux kernel version 3.0.1, the clean target removes
- # arch/powerpc/lib/crtsavres.o which is present in
- # KBUILD_LDFLAGS_MODULE, making it required to build external modules.
- if [ ${ARCH} = "powerpc" ]; then
- cp arch/powerpc/lib/crtsavres.o $kerneldir/arch/powerpc/lib/crtsavres.o
- fi
-
- # Necessary for building modules like compat-wireless.
- cp include/generated/bounds.h $kerneldir/include/generated/bounds.h
-
- # Remove the following binaries which cause strip or arch QA errors
- # during do_package for cross-compiled platforms
- bin_files="arch/powerpc/boot/addnote arch/powerpc/boot/hack-coff \
- arch/powerpc/boot/mktree scripts/kconfig/zconf.tab.o \
- scripts/kconfig/conf.o scripts/kconfig/kxgettext.o"
- for entry in $bin_files; do
- rm -f $kerneldir/$entry
- done
-}
-
-sysroot_stage_all_append() {
- sysroot_stage_dir ${D}${KERNEL_SRC_PATH} ${SYSROOT_DESTDIR}${KERNEL_SRC_PATH}
-}
-
-kernel_do_configure() {
- # fixes extra + in /lib/modules/2.6.37+
- # $ scripts/setlocalversion . => +
- # $ make kernelversion => 2.6.37
- # $ make kernelrelease => 2.6.37+
- touch ${B}/.scmversion ${S}/.scmversion
-
- # Copy defconfig to .config if .config does not exist. This allows
- # recipes to manage the .config themselves in do_configure_prepend().
- if [ -f "${WORKDIR}/defconfig" ] && [ ! -f "${B}/.config" ]; then
- cp "${WORKDIR}/defconfig" "${B}/.config"
- fi
- yes '' | oe_runmake oldconfig
-
- if [ ! -z "${INITRAMFS_IMAGE}" ]; then
- for img in cpio.gz cpio.lzo cpio.lzma cpio.xz; do
- if [ -e "${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-${MACHINE}.$img" ]; then
- cp "${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-${MACHINE}.$img" initramfs.$img
- fi
- done
- fi
-}
-
-do_configure[depends] += "${INITRAMFS_TASK}"
-
-do_savedefconfig() {
- oe_runmake savedefconfig
-}
-do_savedefconfig[nostamp] = "1"
-addtask savedefconfig after do_configure
-
-pkg_postinst_kernel-base () {
- cd /${KERNEL_IMAGEDEST}; update-alternatives --install /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
-}
-
-pkg_postrm_kernel-base () {
- cd /${KERNEL_IMAGEDEST}; update-alternatives --remove ${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} || true
-}
-
-inherit cml1
-
-EXPORT_FUNCTIONS do_compile do_install do_configure
-
-# kernel-base becomes kernel-${KERNEL_VERSION}
-# kernel-image becomes kernel-image-${KERNEL_VERISON}
-PACKAGES = "kernel kernel-base kernel-vmlinux kernel-image kernel-dev"
-FILES = ""
-FILES_kernel-image = "/boot/${KERNEL_IMAGETYPE}*"
-FILES_kernel-dev = "/boot/System.map* /boot/Module.symvers* /boot/config* ${KERNEL_SRC_PATH}"
-FILES_kernel-vmlinux = "/boot/vmlinux*"
-RDEPENDS_kernel = "kernel-base"
-# Allow machines to override this dependency if kernel image files are
-# not wanted in images as standard
-RDEPENDS_kernel-base ?= "kernel-image"
-PKG_kernel-image = "kernel-image-${@legitimize_package_name('${KERNEL_VERSION}')}"
-PKG_kernel-base = "kernel-${@legitimize_package_name('${KERNEL_VERSION}')}"
-RPROVIDES_kernel-base += "kernel-${KERNEL_VERSION}"
-ALLOW_EMPTY_kernel = "1"
-ALLOW_EMPTY_kernel-base = "1"
-ALLOW_EMPTY_kernel-image = "1"
-
-pkg_postinst_kernel-image () {
-if [ ! -e "$D/lib/modules/${KERNEL_VERSION}" ]; then
- mkdir -p $D/lib/modules/${KERNEL_VERSION}
-fi
-if [ -n "$D" ]; then
- depmod -a -b $D -F ${STAGING_KERNEL_DIR}/System.map-${KERNEL_VERSION} ${KERNEL_VERSION}
-else
- depmod -a ${KERNEL_VERSION}
-fi
-}
-
-pkg_postinst_modules () {
-if [ -z "$D" ]; then
- depmod -a ${KERNEL_VERSION}
- update-modules || true
-fi
-}
-
-pkg_postrm_modules () {
-update-modules || true
-}
-
-autoload_postinst_fragment() {
-if [ x"$D" = "x" ]; then
- modprobe %s || true
-fi
-}
-
-# autoload defaults (alphabetically sorted)
-module_autoload_hidp = "hidp"
-module_autoload_ipv6 = "ipv6"
-module_autoload_ipsec = "ipsec"
-module_autoload_ircomm-tty = "ircomm-tty"
-module_autoload_rfcomm = "rfcomm"
-module_autoload_sa1100-rtc = "sa1100-rtc"
-# sa1100-rtc was renamed in 2.6.23 onwards
-module_autoload_rtc-sa1100 = "rtc-sa1100"
-
-# alias defaults (alphabetically sorted)
-module_conf_af_packet = "alias net-pf-17 af_packet"
-module_conf_bluez = "alias net-pf-31 bluez"
-module_conf_bnep = "alias bt-proto-4 bnep"
-module_conf_hci_uart = "alias tty-ldisc-15 hci_uart"
-module_conf_l2cap = "alias bt-proto-0 l2cap"
-module_conf_sco = "alias bt-proto-2 sco"
-module_conf_rfcomm = "alias bt-proto-3 rfcomm"
-
-python populate_packages_prepend () {
- def extract_modinfo(file):
- import tempfile, re, subprocess
- tempfile.tempdir = d.getVar("WORKDIR", True)
- tf = tempfile.mkstemp()
- tmpfile = tf[1]
- cmd = "PATH=\"%s\" %sobjcopy -j .modinfo -O binary %s %s" % (d.getVar("PATH", True), d.getVar("HOST_PREFIX", True) or "", file, tmpfile)
- subprocess.call(cmd, shell=True)
- f = open(tmpfile)
- l = f.read().split("\000")
- f.close()
- os.close(tf[0])
- os.unlink(tmpfile)
- exp = re.compile("([^=]+)=(.*)")
- vals = {}
- for i in l:
- m = exp.match(i)
- if not m:
- continue
- vals[m.group(1)] = m.group(2)
- return vals
-
- def parse_depmod():
- import re
-
- dvar = d.getVar('PKGD', True)
- if not dvar:
- bb.error("PKGD not defined")
- return
-
- kernelver = d.getVar('KERNEL_VERSION', True)
- kernelver_stripped = kernelver
- m = re.match('^(.*-hh.*)[\.\+].*$', kernelver)
- if m:
- kernelver_stripped = m.group(1)
- path = d.getVar("PATH", True)
-
- cmd = "PATH=\"%s\" depmod -n -a -b %s -F %s/boot/System.map-%s %s" % (path, dvar, dvar, kernelver, kernelver_stripped)
- f = os.popen(cmd, 'r')
-
- deps = {}
- pattern0 = "^(.*\.k?o):..*$"
- pattern1 = "^(.*\.k?o):\s*(.*\.k?o)\s*$"
- pattern2 = "^(.*\.k?o):\s*(.*\.k?o)\s*\\\$"
- pattern3 = "^\t(.*\.k?o)\s*\\\$"
- pattern4 = "^\t(.*\.k?o)\s*$"
-
- line = f.readline()
- while line:
- if not re.match(pattern0, line):
- line = f.readline()
- continue
- m1 = re.match(pattern1, line)
- if m1:
- deps[m1.group(1)] = m1.group(2).split()
- else:
- m2 = re.match(pattern2, line)
- if m2:
- deps[m2.group(1)] = m2.group(2).split()
- line = f.readline()
- m3 = re.match(pattern3, line)
- while m3:
- deps[m2.group(1)].extend(m3.group(1).split())
- line = f.readline()
- m3 = re.match(pattern3, line)
- m4 = re.match(pattern4, line)
- deps[m2.group(1)].extend(m4.group(1).split())
- line = f.readline()
- f.close()
- return deps
-
- def get_dependencies(file, pattern, format):
- # file no longer includes PKGD
- file = file.replace(d.getVar('PKGD', True) or '', '', 1)
- # instead is prefixed with /lib/modules/${KERNEL_VERSION}
- file = file.replace("/lib/modules/%s/" % d.getVar('KERNEL_VERSION', True) or '', '', 1)
-
- if module_deps.has_key(file):
- import re
- dependencies = []
- for i in module_deps[file]:
- m = re.match(pattern, os.path.basename(i))
- if not m:
- continue
- on = legitimize_package_name(m.group(1))
- dependency_pkg = format % on
- dependencies.append(dependency_pkg)
- return dependencies
- return []
-
- def frob_metadata(file, pkg, pattern, format, basename):
- import re
- vals = extract_modinfo(file)
-
- dvar = d.getVar('PKGD', True)
-
- # If autoloading is requested, output /etc/modules-load.d/<name>.conf and append
- # appropriate modprobe commands to the postinst
- autoload = d.getVar('module_autoload_%s' % basename, True)
- if autoload:
- name = '%s/etc/modules-load.d/%s.conf' % (dvar, basename)
- f = open(name, 'w')
- for m in autoload.split():
- f.write('%s\n' % m)
- f.close()
- postinst = d.getVar('pkg_postinst_%s' % pkg, True)
- if not postinst:
- bb.fatal("pkg_postinst_%s not defined" % pkg)
- postinst += d.getVar('autoload_postinst_fragment', True) % autoload
- d.setVar('pkg_postinst_%s' % pkg, postinst)
-
- # Write out any modconf fragment
- modconf = d.getVar('module_conf_%s' % basename, True)
- if modconf:
- name = '%s/etc/modprobe.d/%s.conf' % (dvar, basename)
- f = open(name, 'w')
- f.write("%s\n" % modconf)
- f.close()
-
- files = d.getVar('FILES_%s' % pkg, True)
- files = "%s /etc/modules-load.d/%s.conf /etc/modprobe.d/%s.conf" % (files, basename, basename)
- d.setVar('FILES_%s' % pkg, files)
-
- if vals.has_key("description"):
- old_desc = d.getVar('DESCRIPTION_' + pkg, True) or ""
- d.setVar('DESCRIPTION_' + pkg, old_desc + "; " + vals["description"])
-
- rdepends_str = d.getVar('RDEPENDS_' + pkg, True)
- if rdepends_str:
- rdepends = rdepends_str.split()
- else:
- rdepends = []
- rdepends.extend(get_dependencies(file, pattern, format))
- d.setVar('RDEPENDS_' + pkg, ' '.join(rdepends))
-
- module_deps = parse_depmod()
- module_regex = '^(.*)\.k?o$'
- module_pattern = 'kernel-module-%s'
-
- postinst = d.getVar('pkg_postinst_modules', True)
- postrm = d.getVar('pkg_postrm_modules', True)
- do_split_packages(d, root='/lib/firmware', file_regex='^(.*)\.bin$', output_pattern='kernel-firmware-%s', description='Firmware for %s', recursive=True, extra_depends='')
- do_split_packages(d, root='/lib/firmware', file_regex='^(.*)\.fw$', output_pattern='kernel-firmware-%s', description='Firmware for %s', recursive=True, extra_depends='')
- do_split_packages(d, root='/lib/firmware', file_regex='^(.*)\.cis$', output_pattern='kernel-firmware-%s', description='Firmware for %s', recursive=True, extra_depends='')
- do_split_packages(d, root='/lib/modules', file_regex=module_regex, output_pattern=module_pattern, description='%s kernel module', postinst=postinst, postrm=postrm, recursive=True, hook=frob_metadata, extra_depends='update-modules kernel-%s' % d.getVar("KERNEL_VERSION", True))
-
- # If modules-load.d and modprobe.d are empty at this point, remove them to
- # avoid warnings. removedirs only raises an OSError if an empty
- # directory cannot be removed.
- dvar = d.getVar('PKGD', True)
- for dir in ["%s/etc/modprobe.d" % (dvar), "%s/etc/modules-load.d" % (dvar), "%s/etc" % (dvar)]:
- if len(os.listdir(dir)) == 0:
- os.rmdir(dir)
-
- import re
- metapkg = "kernel-modules"
- d.setVar('ALLOW_EMPTY_' + metapkg, "1")
- d.setVar('FILES_' + metapkg, "")
- blacklist = [ 'kernel-dev', 'kernel-image', 'kernel-base', 'kernel-vmlinux' ]
- for l in module_deps.values():
- for i in l:
- pkg = module_pattern % legitimize_package_name(re.match(module_regex, os.path.basename(i)).group(1))
- blacklist.append(pkg)
- metapkg_rdepends = []
- packages = d.getVar('PACKAGES', True).split()
- for pkg in packages[1:]:
- if not pkg in blacklist and not pkg in metapkg_rdepends:
- metapkg_rdepends.append(pkg)
- d.setVar('RDEPENDS_' + metapkg, ' '.join(metapkg_rdepends))
- d.setVar('DESCRIPTION_' + metapkg, 'Kernel modules meta package')
- packages.append(metapkg)
- d.setVar('PACKAGES', ' '.join(packages))
-}
-
-# Support checking the kernel size since some kernels need to reside in partitions
-# with a fixed length or there is a limit in transferring the kernel to memory
-do_sizecheck() {
- if [ ! -z "${KERNEL_IMAGE_MAXSIZE}" ]; then
- size=`ls -l ${KERNEL_OUTPUT} | awk '{ print $5}'`
- if [ $size -ge ${KERNEL_IMAGE_MAXSIZE} ]; then
- rm ${KERNEL_OUTPUT}
- die "This kernel (size=$size > ${KERNEL_IMAGE_MAXSIZE}) is too big for your device. Please reduce the size of the kernel by making more of it modular."
- fi
- fi
-}
-
-addtask sizecheck before do_install after do_compile
-
-KERNEL_IMAGE_BASE_NAME ?= "${KERNEL_IMAGETYPE}-${PV}-${PR}-${MACHINE}-${DATETIME}"
-# Don't include the DATETIME variable in the sstate package signatures
-KERNEL_IMAGE_BASE_NAME[vardepsexclude] = "DATETIME"
-KERNEL_IMAGE_SYMLINK_NAME ?= "${KERNEL_IMAGETYPE}-${MACHINE}"
-
-do_uboot_mkimage() {
- if test "x${KERNEL_IMAGETYPE}" = "xuImage" ; then
- if test "x${KEEPUIMAGE}" = "x" ; then
- ENTRYPOINT=${UBOOT_ENTRYPOINT}
- if test -n "${UBOOT_ENTRYSYMBOL}"; then
- ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \
- awk '$3=="${UBOOT_ENTRYSYMBOL}" {print $1}'`
- fi
- if test -e arch/${ARCH}/boot/compressed/vmlinux ; then
- ${OBJCOPY} -O binary -R .note -R .comment -S arch/${ARCH}/boot/compressed/vmlinux linux.bin
- uboot-mkimage -A ${UBOOT_ARCH} -O linux -T kernel -C none -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin arch/${ARCH}/boot/uImage
- rm -f linux.bin
- else
- ${OBJCOPY} -O binary -R .note -R .comment -S vmlinux linux.bin
- rm -f linux.bin.gz
- gzip -9 linux.bin
- uboot-mkimage -A ${UBOOT_ARCH} -O linux -T kernel -C gzip -a ${UBOOT_LOADADDRESS} -e $ENTRYPOINT -n "${DISTRO_NAME}/${PV}/${MACHINE}" -d linux.bin.gz arch/${ARCH}/boot/uImage
- rm -f linux.bin.gz
- fi
- fi
- fi
-}
-
-addtask uboot_mkimage before do_install after do_compile
-
-kernel_do_deploy() {
- install -m 0644 ${KERNEL_OUTPUT} ${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
- if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
- tar -cvzf ${DEPLOYDIR}/modules-${KERNEL_VERSION}-${PR}-${MACHINE}.tgz -C ${D} lib
- fi
-
- cd ${DEPLOYDIR}
- rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.bin
- ln -sf ${KERNEL_IMAGE_BASE_NAME}.bin ${KERNEL_IMAGE_SYMLINK_NAME}.bin
- ln -sf ${KERNEL_IMAGE_BASE_NAME}.bin ${KERNEL_IMAGETYPE}
-
- cp ${COREBASE}/meta/files/deploydir_readme.txt ${DEPLOYDIR}/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
-}
-do_deploy[dirs] = "${DEPLOYDIR} ${B}"
-
-addtask deploy before do_build after do_install
-
-EXPORT_FUNCTIONS do_deploy
-
diff --git a/meta-oe/classes/machine_kernel_pr.bbclass b/meta-oe/classes/machine_kernel_pr.bbclass
new file mode 100644
index 0000000..463b64d
--- /dev/null
+++ b/meta-oe/classes/machine_kernel_pr.bbclass
@@ -0,0 +1,8 @@
+python __anonymous () {
+
+ machine_kernel_pr = d.getVar('MACHINE_KERNEL_PR', True)
+
+ if machine_kernel_pr:
+ d.setVar('PR', machine_kernel_pr)
+}
+
--
1.7.5.4
More information about the Openembedded-devel
mailing list