[oe] [PATCH 03/58] vpnc: import from OE-classic
Martin Jansa
martin.jansa at gmail.com
Tue Dec 4 01:58:36 UTC 2012
* needed for exalt
* fix LICENSE
* add LIC_FILES_CHKSUM
* .inc merged to .bb and cleaned files
Signed-off-by: Martin Jansa <Martin.Jansa at gmail.com>
---
.../recipes-connectivity/vpnc/vpnc/default.conf | 19 +++
.../recipes-connectivity/vpnc/vpnc/long-help | 168 +++++++++++++++++++++
.../recipes-connectivity/vpnc/vpnc/makeman.patch | 11 ++
.../vpnc/vpnc/vpnc-install.patch | 35 +++++
.../recipes-connectivity/vpnc/vpnc_0.5.3.bb | 30 ++++
5 files changed, 263 insertions(+)
create mode 100644 meta-networking/recipes-connectivity/vpnc/vpnc/default.conf
create mode 100644 meta-networking/recipes-connectivity/vpnc/vpnc/long-help
create mode 100644 meta-networking/recipes-connectivity/vpnc/vpnc/makeman.patch
create mode 100644 meta-networking/recipes-connectivity/vpnc/vpnc/vpnc-install.patch
create mode 100644 meta-networking/recipes-connectivity/vpnc/vpnc_0.5.3.bb
diff --git a/meta-networking/recipes-connectivity/vpnc/vpnc/default.conf b/meta-networking/recipes-connectivity/vpnc/vpnc/default.conf
new file mode 100644
index 0000000..48b15ec
--- /dev/null
+++ b/meta-networking/recipes-connectivity/vpnc/vpnc/default.conf
@@ -0,0 +1,19 @@
+# Comment out the options you need.
+# Verify your config with "vpnc --print-config".
+# You might also try "vpnc --long-help" or look into the documentation.
+
+# Needed (you will be prompted if this is missing):
+#IPSec gateway 10.1.2.3
+#IPSec ID YOURPEERSID
+#IPSec secret YOURPEERSSECRET
+#Xauth username YOURUSERNAME
+#Xauth password YOURPASSWORD
+
+# Optional:
+#UDP Encapsulate
+#UDP Encapsulation Port 10000
+#Noninteractive
+#No Detach
+#Debug 99
+#Interface name tun0
+#Script /etc/vpnc/vpnc-script
diff --git a/meta-networking/recipes-connectivity/vpnc/vpnc/long-help b/meta-networking/recipes-connectivity/vpnc/vpnc/long-help
new file mode 100644
index 0000000..fbec254
--- /dev/null
+++ b/meta-networking/recipes-connectivity/vpnc/vpnc/long-help
@@ -0,0 +1,168 @@
+Usage: vpnc [--version] [--print-config] [--help] [--long-help] [options] [config files]
+
+Options:
+ --gateway <ip/hostname>
+ IP/name of your IPSec gateway
+ conf-variable: IPSec gateway <ip/hostname>
+
+ --id <ASCII string>
+ your group name
+ conf-variable: IPSec ID <ASCII string>
+
+ (configfile only option)
+ your group password (cleartext)
+ conf-variable: IPSec secret <ASCII string>
+
+ (configfile only option)
+ your group password (obfuscated)
+ conf-variable: IPSec obfuscated secret <hex string>
+
+ --username <ASCII string>
+ your username
+ conf-variable: Xauth username <ASCII string>
+
+ (configfile only option)
+ your password (cleartext)
+ conf-variable: Xauth password <ASCII string>
+
+ (configfile only option)
+ your password (obfuscated)
+ conf-variable: Xauth obfuscated password <hex string>
+
+ --domain <ASCII string>
+ (NT-) Domain name for authentication
+ conf-variable: Domain <ASCII string>
+
+ --xauth-inter
+ enable interactive extended authentication (for challenge response auth)
+ conf-variable: Xauth interactive
+
+ --vendor <cisco/netscreen>
+ vendor of your IPSec gateway
+ Default: cisco
+ conf-variable: Vendor <cisco/netscreen>
+
+ --natt-mode <natt/none/force-natt/cisco-udp>
+ Which NAT-Traversal Method to use:
+ * natt -- NAT-T as defined in RFC3947
+ * none -- disable use of any NAT-T method
+ * force-natt -- always use NAT-T encapsulation even
+ without presence of a NAT device
+ (useful if the OS captures all ESP traffic)
+ * cisco-udp -- Cisco proprietary UDP encapsulation, commonly over Port 10000
+ Note: cisco-tcp encapsulation is not yet supported
+ Default: natt
+ conf-variable: NAT Traversal Mode <natt/none/force-natt/cisco-udp>
+
+ --script <command>
+ command is executed using system() to configure the interface,
+ routing and so on. Device name, IP, etc. are passed using enviroment
+ variables, see README. This script is executed right after ISAKMP is
+ done, but before tunneling is enabled. It is called when vpnc
+ terminates, too
+ Default: /etc/vpnc/vpnc-script
+ conf-variable: Script <command>
+
+ --dh <dh1/dh2/dh5>
+ name of the IKE DH Group
+ Default: dh2
+ conf-variable: IKE DH Group <dh1/dh2/dh5>
+
+ --pfs <nopfs/dh1/dh2/dh5/server>
+ Diffie-Hellman group to use for PFS
+ Default: server
+ conf-variable: Perfect Forward Secrecy <nopfs/dh1/dh2/dh5/server>
+
+ --enable-1des
+ enables weak single DES encryption
+ conf-variable: Enable Single DES
+
+ --enable-no-encryption
+ enables using no encryption for data traffic (key exchanged must be encrypted)
+ conf-variable: Enable no encryption
+
+ --application-version <ASCII string>
+ Application Version to report. Note: Default string is generated at runtime.
+ Default: Cisco Systems VPN Client 0.5.3-394:Linux
+ conf-variable: Application version <ASCII string>
+
+ --ifname <ASCII string>
+ visible name of the TUN/TAP interface
+ conf-variable: Interface name <ASCII string>
+
+ --ifmode <tun/tap>
+ mode of TUN/TAP interface:
+ * tun: virtual point to point interface (default)
+ * tap: virtual ethernet interface
+ Default: tun
+ conf-variable: Interface mode <tun/tap>
+
+ --debug <0/1/2/3/99>
+ Show verbose debug messages
+ * 0: Do not print debug information.
+ * 1: Print minimal debug information.
+ * 2: Show statemachine and packet/payload type information.
+ * 3: Dump everything exluding authentication data.
+ * 99: Dump everything INCLUDING AUTHENTICATION data (e.g. PASSWORDS).
+ conf-variable: Debug <0/1/2/3/99>
+
+ --no-detach
+ Don't detach from the console after login
+ conf-variable: No Detach
+
+ --pid-file <filename>
+ store the pid of background process in <filename>
+ Default: /var/run/vpnc/pid
+ conf-variable: Pidfile <filename>
+
+ --local-addr <ip/hostname>
+ local IP to use for ISAKMP / ESP / ... (0.0.0.0 == automatically assign)
+ Default: 0.0.0.0
+ conf-variable: Local Addr <ip/hostname>
+
+ --local-port <0-65535>
+ local ISAKMP port number to use (0 == use random port)
+ Default: 500
+ conf-variable: Local Port <0-65535>
+
+ --udp-port <0-65535>
+ Local UDP port number to use (0 == use random port).
+ This is only relevant if cisco-udp nat-traversal is used.
+ This is the _local_ port, the remote udp port is discovered automatically.
+ It is especially not the cisco-tcp port.
+ Default: 10000
+ conf-variable: Cisco UDP Encapsulation Port <0-65535>
+
+ --dpd-idle <0,10-86400>
+ Send DPD packet after not receiving anything for <idle> seconds.
+ Use 0 to disable DPD completely (both ways).
+ Default: 300
+ conf-variable: DPD idle timeout (our side) <0,10-86400>
+
+ --non-inter
+ Don't ask anything, exit on missing options
+ conf-variable: Noninteractive
+
+ --auth-mode <psk/cert/hybrid>
+ Authentication mode:
+ * psk: pre-shared key (default)
+ * cert: server + client certificate (not implemented yet)
+ * hybrid: server certificate + xauth (if built with openssl support)
+ Default: psk
+ conf-variable: IKE Authmode <psk/cert/hybrid>
+
+ --ca-file <filename>
+ filename and path to the CA-PEM-File
+ conf-variable: CA-File <filename>
+
+ --ca-dir <directory>
+ path of the trusted CA-Directory
+ Default: /etc/ssl/certs
+ conf-variable: CA-Dir <directory>
+
+ --target-network <target network/netmask>
+ Target network in dotted decimal or CIDR notation
+ Default: 0.0.0.0/0.0.0.0
+ conf-variable: IPSEC target network <target network/netmask>
+
+Report bugs to vpnc at unix-ag.uni-kl.de
diff --git a/meta-networking/recipes-connectivity/vpnc/vpnc/makeman.patch b/meta-networking/recipes-connectivity/vpnc/vpnc/makeman.patch
new file mode 100644
index 0000000..f394e6a
--- /dev/null
+++ b/meta-networking/recipes-connectivity/vpnc/vpnc/makeman.patch
@@ -0,0 +1,11 @@
+--- vpnc-0.5.1/makeman.pl.old 2008-03-16 02:17:59.000000000 -0500
++++ vpnc-0.5.1/makeman.pl 2008-03-16 02:29:34.000000000 -0500
+@@ -29,7 +29,7 @@ my $vpnc = './vpnc';
+ # indenting lists (those originally starting with an asterisk). I hope
+ # this pays off when converting the manpage to HTML or such.
+
+-open my $LONGHELP, '-|', "$vpnc --long-help";
++open my $LONGHELP, '-|', "cat ../long-help";
+ my $vpnc_options = '';
+ my $relative_indent = 0;
+ my $indent_needed = 0;
diff --git a/meta-networking/recipes-connectivity/vpnc/vpnc/vpnc-install.patch b/meta-networking/recipes-connectivity/vpnc/vpnc/vpnc-install.patch
new file mode 100644
index 0000000..3de65ec
--- /dev/null
+++ b/meta-networking/recipes-connectivity/vpnc/vpnc/vpnc-install.patch
@@ -0,0 +1,35 @@
+--- a/Makefile~ 2009-01-20 18:44:30.000000000 +0100
++++ b/Makefile 2009-01-20 18:44:30.000000000 +0100
+@@ -119,21 +119,21 @@
+ else \
+ install vpnc-script $(DESTDIR)$(ETCDIR); \
+ fi
+- install -m600 vpnc.conf $(DESTDIR)$(ETCDIR)/default.conf
+- install -m755 vpnc-disconnect $(DESTDIR)$(SBINDIR)
+- install -m755 pcf2vpnc $(DESTDIR)$(BINDIR)
+- install -m644 vpnc.8 $(DESTDIR)$(MANDIR)/man8
+- install -m644 pcf2vpnc.1 $(DESTDIR)$(MANDIR)/man1
+- install -m644 cisco-decrypt.1 $(DESTDIR)$(MANDIR)/man1
+- install -m644 COPYING $(DESTDIR)$(DOCDIR)
++ install -m 600 vpnc.conf $(DESTDIR)$(ETCDIR)/default.conf
++ install -m 755 vpnc-disconnect $(DESTDIR)$(SBINDIR)
++ install -m 755 pcf2vpnc $(DESTDIR)$(BINDIR)
++ install -m 644 vpnc.8 $(DESTDIR)$(MANDIR)/man8
++ install -m 644 pcf2vpnc.1 $(DESTDIR)$(MANDIR)/man1
++ install -m 644 cisco-decrypt.1 $(DESTDIR)$(MANDIR)/man1
++ install -m 644 COPYING $(DESTDIR)$(DOCDIR)
+
+ install : install-common
+- install -m755 vpnc $(DESTDIR)$(SBINDIR)
+- install -m755 cisco-decrypt $(DESTDIR)$(BINDIR)
++ install -m 755 vpnc $(DESTDIR)$(SBINDIR)
++ install -m 755 cisco-decrypt $(DESTDIR)$(BINDIR)
+
+ install-strip : install-common
+- install -s -m755 vpnc $(DESTDIR)$(SBINDIR)
+- install -s -m755 cisco-decrypt $(DESTDIR)$(BINDIR)
++ install -s -m 755 vpnc $(DESTDIR)$(SBINDIR)
++ install -s -m 755 cisco-decrypt $(DESTDIR)$(BINDIR)
+
+ uninstall :
+ rm -f $(DESTDIR)$(SBINDIR)/vpnc \
diff --git a/meta-networking/recipes-connectivity/vpnc/vpnc_0.5.3.bb b/meta-networking/recipes-connectivity/vpnc/vpnc_0.5.3.bb
new file mode 100644
index 0000000..1b2b8bf
--- /dev/null
+++ b/meta-networking/recipes-connectivity/vpnc/vpnc_0.5.3.bb
@@ -0,0 +1,30 @@
+DESCRIPTION = "A client for the Cisco3000 VPN Concentrator"
+HOMEPAGE = "http://www.unix-ag.uni-kl.de/~massar/vpnc/"
+AUTHOR = "Maurice Massar vpnc at unix-ag.uni-kl.de"
+SECTION = "console/network"
+PRIORITY = "optional"
+LICENSE = "GPL-2.0+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=173b74cb8ac640a9992c03f3bce22a33"
+DEPENDS = "libgcrypt"
+RDEPENDS_${PN} = "kernel-module-tun"
+
+CFLAGS_append = ' -DVERSION=\\"${PV}\\"'
+LDFLAGS_append = " -lgcrypt -lgpg-error"
+
+do_install () {
+ sed -i s:m600:m\ 600:g Makefile
+ oe_runmake 'DESTDIR=${D}' 'PREFIX=/usr' install
+ rm -f ${D}${sysconfdir}/vpnc/vpnc.conf #This file is useless
+ install ${WORKDIR}/default.conf ${D}${sysconfdir}/vpnc/default.conf
+}
+
+CONFFILES_${PN} = "${sysconfdir}/vpnc/default.conf"
+
+SRC_URI = "http://www.unix-ag.uni-kl.de/~massar/vpnc/vpnc-${PV}.tar.gz \
+ file://makeman.patch \
+ file://vpnc-install.patch \
+ file://long-help \
+ file://default.conf"
+
+SRC_URI[md5sum] = "4378f9551d5b077e1770bbe09995afb3"
+SRC_URI[sha256sum] = "46cea3bd02f207c62c7c6f2f22133382602baeda1dc320747809e94881414884"
--
1.8.0
More information about the Openembedded-devel
mailing list