[oe] [meta-oe][PATCH] vlan: Port vlan 1.9 recipe from OE Classic
Paul Menzel
paulepanter at users.sourceforge.net
Wed Feb 15 08:49:22 UTC 2012
Dear Kelvin,
Am Mittwoch, den 15.02.2012, 00:14 +0000 schrieb Kelvin Lawson:
please add the revision from the OE-Classic repository you took this
from.
> Signed-off-by: Kelvin Lawson <kelvinl at users.sf.net>
> ---
> meta-oe/recipes-connectivity/vlan/files/ip | 21 +++++++
> .../recipes-connectivity/vlan/files/vlan-post-down | 28 +++++++++
> .../recipes-connectivity/vlan/files/vlan-pre-up | 61 ++++++++++++++++++++
> meta-oe/recipes-connectivity/vlan/vlan_1.9.bb | 39 +++++++++++++
> 4 files changed, 149 insertions(+), 0 deletions(-)
> create mode 100644 meta-oe/recipes-connectivity/vlan/files/ip
> create mode 100644 meta-oe/recipes-connectivity/vlan/files/vlan-post-down
> create mode 100644 meta-oe/recipes-connectivity/vlan/files/vlan-pre-up
> create mode 100644 meta-oe/recipes-connectivity/vlan/vlan_1.9.bb
>
> diff --git a/meta-oe/recipes-connectivity/vlan/files/ip
> b/meta-oe/recipes-connectivity/vlan/files/ip
> new file mode 100644
> index 0000000..d7de05c
> --- /dev/null
> +++ b/meta-oe/recipes-connectivity/vlan/files/ip
> @@ -0,0 +1,21 @@
> +#!/bin/sh
> +# This should probably go into ifupdown
> +# But usually only those with lots of interfaces (vlans) need these
> +if [ -d "/proc/sys/net/ipv4/conf/$IFACE" ]
> +then
> + if [ -n "$IF_IP_PROXY_ARP" ]; then
> + if [ "$IF_IP_PROXY_ARP" -eq "1" ]; then
> + echo 1 > "/proc/sys/net/ipv4/conf/$IFACE/proxy_arp"
> + else
> + echo 0 > "/proc/sys/net/ipv4/conf/$IFACE/proxy_arp"
> + fi
> + fi
> + if [ -n "$IF_IP_RP_FILTER" ]; then
> + if [ "$IF_IP_RP_FILTER" -eq "0" ]; then
> + echo 0 > "/proc/sys/net/ipv4/conf/$IFACE/rp_filter"
> + else
> + echo 1 > "/proc/sys/net/ipv4/conf/$IFACE/rp_filter"
> + fi
> + fi
> +fi
> +
> diff --git a/meta-oe/recipes-connectivity/vlan/files/vlan-post-down
> b/meta-oe/recipes-connectivity/vlan/files/vlan-post-down
> new file mode 100644
> index 0000000..89b16fb
> --- /dev/null
> +++ b/meta-oe/recipes-connectivity/vlan/files/vlan-post-down
> @@ -0,0 +1,28 @@
> +#!/bin/sh
> +
> +# If IFACE is an automagic vlan interface (without the vlan-raw-device
> +# parameter) then let's try to discover the magic here.. Another way would be
> +# to just probe for the right device name in /proc/net/vlan
> +
> +case "$IFACE" in
> + # Ignore any alias (#272891)
> + *:*)
> + exit 0
> + ;;
> + eth*.0*|bond*.0*|wlan*.0*)
> + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed
> "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
Your mailer corrupted the patch by adding automatic line breaks.
> + ;;
> + eth*.*|bond*.*|wlan*.*)
> + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed
> "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
> + ;;
> + # Test for vlan raw device (#196890, #292648)
> + *)
> + [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0
> + ;;
> +esac
> +
> +if [ ! -x /sbin/vconfig ]; then
> + exit 0
> +fi
> +
> +vconfig rem $IFACE
> diff --git a/meta-oe/recipes-connectivity/vlan/files/vlan-pre-up
> b/meta-oe/recipes-connectivity/vlan/files/vlan-pre-up
> new file mode 100644
> index 0000000..b977be8
> --- /dev/null
> +++ b/meta-oe/recipes-connectivity/vlan/files/vlan-pre-up
> @@ -0,0 +1,61 @@
> +#!/bin/sh
> +
> +# Most of this stuff is to enable vlans
> +
> +case "$IFACE" in
> + # Ignore any alias (#272891) which uses <interface>:<alabel>
> + *:*)
> + exit 0
> + ;;
> + vlan0*)
> + vconfig set_name_type VLAN_PLUS_VID
> + VLANID=`echo $IFACE|sed "s/vlan0*//"`
> + ;;
> + vlan*)
> + vconfig set_name_type VLAN_PLUS_VID_NO_PAD
> + VLANID=`echo $IFACE|sed "s/vlan0*//"`
> + ;;
> + eth*.0*|bond*.0*|wlan*.0*)
> + vconfig set_name_type DEV_PLUS_VID
> + VLANID=`echo $IFACE|sed
> "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//;s/wlan[0-9][0-9]*\.0*//"`
> + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed
> "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
> + ;;
> + eth*.*|bond*.*|wlan*.*)
> + vconfig set_name_type DEV_PLUS_VID_NO_PAD
> + VLANID=`echo $IFACE|sed
> "s/eth[0-9][0-9]*\.0*//g;s/bond[0-9][0-9]*\.0*//g;s/wlan[0-9][0-9]*\.0*//g"`
> + IF_VLAN_RAW_DEVICE=`echo $IFACE|sed
> "s/\(eth[0-9][0-9]*\)\..*/\1/;s/\(bond[0-9][0-9]*\)\..*/\1/;s/\(wlan[0-9][0-9]*\)\..*/\1/"`
> + ;;
> + *.0*)
> + # Silently ignore interfaces which we do not (know how to) support
> + [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0
> + vconfig set_name_type DEV_PLUS_VID
> + VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"`
> + ;;
> + *.*)
> + # Silently ignore interfaces which we do not (know how to) support
> + [ -z "$IF_VLAN_RAW_DEVICE" ] && exit 0
> + vconfig set_name_type DEV_PLUS_VID_NO_PAD
> + VLANID=`echo $IFACE|sed "s/[^.]*\.0*//g"`
> + ;;
> +
> + *)
> + exit 0
> + ;;
> +esac
> +
> +if [ -n "$IF_VLAN_RAW_DEVICE" ]; then
> + if [ ! -x /sbin/vconfig ]; then
> + exit 0
> + fi
> + if ! ip link show dev "$IF_VLAN_RAW_DEVICE" > /dev/null; then
> + echo "$IF_VLAN_RAW_DEVICE does not exist, unable to create $IFACE"
> + exit 1
> + fi
> + ip link set up dev $IF_VLAN_RAW_DEVICE
> + vconfig add $IF_VLAN_RAW_DEVICE $VLANID
> +fi
> +
> +# This is not vlan specific, and should actually go somewhere else.
> +if [ -n "$IF_HW_MAC_ADDRESS" ]; then
> + ip link set $IFACE address $IF_HW_MAC_ADDRESS
> +fi
> diff --git a/meta-oe/recipes-connectivity/vlan/vlan_1.9.bb
> b/meta-oe/recipes-connectivity/vlan/vlan_1.9.bb
> new file mode 100644
> index 0000000..619e039
> --- /dev/null
> +++ b/meta-oe/recipes-connectivity/vlan/vlan_1.9.bb
> @@ -0,0 +1,39 @@
> +DESCRIPTION = "802.1q vlan support program"
> +LICENSE = "GPLv2"
> +LIC_FILES_CHKSUM =
> "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
> +RRECOMMENDS_${PN} = "kernel-module-8021q"
> +PR = "r1"
Please start with `r0`.
> +
> +S = "${WORKDIR}/vlan/"
> +
> +SRC_URI = " \
> + http://www.candelatech.com/~greear/vlan/vlan.${PV}.tar.gz \
> + file://ip \
> + file://vlan-pre-up \
> + file://vlan-post-down \
> + "
> +
> +inherit base
> +
> +CCFLAGS = "-g -D_GNU_SOURCE -Wall -I${STAGING_INCDIR}"
> +LDLIBS = ""
> +
> +do_compile() {
> + ${CC} ${CCFLAGS} -c vconfig.c
> + ${CC} ${CCFLAGS} ${LDFLAGS} -o vconfig vconfig.o ${LDLIBS}
> +}
> +
> +do_install() {
> + install -d "${D}${sbindir}"
> + install -m 755 "${S}/vconfig" "${D}${sbindir}/vconfig"
> + install -d ${D}/${sysconfdir}/network/if-pre-up.d
> + install -d ${D}/${sysconfdir}/network/if-post-down.d
> + install -d ${D}/${sysconfdir}/network/if-up.d
> + install -m 0755 ${WORKDIR}/ip ${D}/${sysconfdir}/network/if-up.d/
> + install -m 0755 ${WORKDIR}/vlan-pre-up
> ${D}/${sysconfdir}/network/if-pre-up.d/vlan
> + install -m 0755 ${WORKDIR}/vlan-post-down
> ${D}/${sysconfdir}/network/if-post-down.d/vlan
> +}
> +
> +
> +SRC_URI[md5sum] = "5f0c6060b33956fb16e11a15467dd394"
> +SRC_URI[sha256sum] =
> "3b8f0a1bf0d3642764e5f646e1f3bbc8b1eeec474a77392d9aeb4868842b4cca"
Thanks,
Paul
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part
URL: <http://lists.openembedded.org/pipermail/openembedded-devel/attachments/20120215/59278027/attachment-0002.sig>
More information about the Openembedded-devel
mailing list